Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 9月, 2019 2 次提交
    • M
      fuse: flatten 'struct fuse_args' · d5b48543
      由 Miklos Szeredi 提交于 
      ...to make future expansion simpler.  The hiearachical structure is a
historical thing that does not serve any practical purpose.

The generated code is excatly the same before and after the patch.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      d5b48543
    • E
      fuse: fix deadlock with aio poll and fuse_iqueue::waitq.lock · 76e43c8c
      由 Eric Biggers 提交于 
      When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.

This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled.  Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.

Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.

Reproducer:

	#include <fcntl.h>
	#include <stdio.h>
	#include <sys/mount.h>
	#include <sys/stat.h>
	#include <sys/syscall.h>
	#include <unistd.h>
	#include <linux/aio_abi.h>

	int main()
	{
		char opts[128];
		int fd = open("/dev/fuse", O_RDWR);
		aio_context_t ctx = 0;
		struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
		struct iocb *cbp = &cb;

		sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
		mkdir("mnt", 0700);
		mount("foo",  "mnt", "fuse", 0, opts);
		syscall(__NR_io_setup, 1, &ctx);
		syscall(__NR_io_submit, ctx, 1, &cbp);
	}

Beginning of lockdep output:

	=====================================================
	WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
	5.3.0-rc5 #9 Not tainted
	-----------------------------------------------------
	syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
	000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
	000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825

	and this task is already holding:
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
	0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
	which would create a new lock dependency:
	 (&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}

	but this new dependency connects a SOFTIRQ-irq-safe lock:
	 (&(&ctx->ctx_lock)->rlock){..-.}

	[...]

Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      76e43c8c
  3. 07 9月, 2019 2 次提交
  5. 08 5月, 2019 1 次提交
  7. 02 5月, 2019 1 次提交
    • A
      fuse: switch to ->free_inode() · 9baf28bb
      由 Al Viro 提交于 
      fuse_destroy_inode() is gone - sanity checks that need the stack
trace of the caller get moved into ->evict_inode(), the rest joins
the RCU-delayed part which becomes ->free_inode().

While we are at it, don't just pass the address of what happens
to be the first member of structure to kmem_cache_free() -
get_fuse_inode() is there for purpose and it gives the proper
container_of() use.  No behaviour change, but verifying correctness
is easier that way.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      9baf28bb
  9. 24 4月, 2019 2 次提交
    • K
      fuse: allow filesystems to have precise control over data cache · ad2ba64d
      由 Kirill Smelkov 提交于 
      On networked filesystems file data can be changed externally.  FUSE
provides notification messages for filesystem to inform kernel that
metadata or data region of a file needs to be invalidated in local page
cache. That provides the basis for filesystem implementations to invalidate
kernel cache explicitly based on observed filesystem-specific events.

FUSE has also "automatic" invalidation mode(*) when the kernel
automatically invalidates data cache of a file if it sees mtime change.  It
also automatically invalidates whole data cache of a file if it sees file
size being changed.

The automatic mode has corresponding capability - FUSE_AUTO_INVAL_DATA.
However, due to probably historical reason, that capability controls only
whether mtime change should be resulting in automatic invalidation or
not. A change in file size always results in invalidating whole data cache
of a file irregardless of whether FUSE_AUTO_INVAL_DATA was negotiated(+).

The filesystem I write[1] represents data arrays stored in networked
database as local files suitable for mmap. It is read-only filesystem -
changes to data are committed externally via database interfaces and the
filesystem only glues data into contiguous file streams suitable for mmap
and traditional array processing. The files are big - starting from
hundreds gigabytes and more. The files change regularly, and frequently by
data being appended to their end. The size of files thus changes
frequently.

If a file was accessed locally and some part of its data got into page
cache, we want that data to stay cached unless there is memory pressure, or
unless corresponding part of the file was actually changed. However current
FUSE behaviour - when it sees file size change - is to invalidate the whole
file. The data cache of the file is thus completely lost even on small size
change, and despite that the filesystem server is careful to accurately
translate database changes into FUSE invalidation messages to kernel.

Let's fix it: if a filesystem, through new FUSE_EXPLICIT_INVAL_DATA
capability, indicates to kernel that it is fully responsible for data cache
invalidation, then the kernel won't invalidate files data cache on size
change and only truncate that cache to new size in case the size decreased.

(*) see 72d0d248 "fuse: add FUSE_AUTO_INVAL_DATA init flag",
eed2179e "fuse: invalidate inode mapping if mtime changes"

(+) in writeback mode the kernel does not invalidate data cache on file
size change, but neither it allows the filesystem to set the size due to
external event (see 8373200b "fuse: Trust kernel i_size only")

[1] https://lab.nexedi.com/kirr/wendelin.core/blob/a50f1d9f/wcfs/wcfs.go#L20Signed-off-by: NKirill Smelkov <kirr@nexedi.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      ad2ba64d
    • K
      fuse: convert printk -> pr_* · f2294482
      由 Kirill Smelkov 提交于 
      Functions, like pr_err, are a more modern variant of printing compared to
printk. They could be used to denoise sources by using needed level in
the print function name, and by automatically inserting per-driver /
function / ... print prefix as defined by pr_fmt macro. pr_* are also
said to be used in Documentation/process/coding-style.rst and more
recent code - for example overlayfs - uses them instead of printk.

Convert CUSE and FUSE to use the new pr_* functions.

CUSE output stays completely unchanged, while FUSE output is amended a
bit for "trying to steal weird page" warning - the second line now comes
also with "fuse:" prefix. I hope it is ok.
Suggested-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NKirill Smelkov <kirr@nexedi.com>
Reviewed-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      f2294482
  11. 13 3月, 2019 1 次提交
  13. 13 2月, 2019 6 次提交
  15. 16 1月, 2019 1 次提交
  17. 29 12月, 2018 1 次提交
  19. 10 12月, 2018 1 次提交
    • T
      fuse: Fix memory leak in fuse_dev_free() · d72f70da
      由 Takeshi Misawa 提交于 
      When ntfs is unmounted, the following leak is
reported by kmemleak.

kmemleak report:

unreferenced object 0xffff880052bf4400 (size 4096):
  comm "mount.ntfs", pid 16530, jiffies 4294861127 (age 3215.836s)
  hex dump (first 32 bytes):
    00 44 bf 52 00 88 ff ff 00 44 bf 52 00 88 ff ff  .D.R.....D.R....
    10 44 bf 52 00 88 ff ff 10 44 bf 52 00 88 ff ff  .D.R.....D.R....
  backtrace:
    [<00000000bf4a2f8d>] fuse_fill_super+0xb22/0x1da0 [fuse]
    [<000000004dde0f0c>] mount_bdev+0x263/0x320
    [<0000000025aebc66>] mount_fs+0x82/0x2bf
    [<0000000042c5a6be>] vfs_kern_mount.part.33+0xbf/0x480
    [<00000000ed10cd5b>] do_mount+0x3de/0x2ad0
    [<00000000d59ff068>] ksys_mount+0xba/0xd0
    [<000000001bda1bcc>] __x64_sys_mount+0xba/0x150
    [<00000000ebe26304>] do_syscall_64+0x151/0x490
    [<00000000d25f2b42>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
    [<000000002e0abd2c>] 0xffffffffffffffff

fuse_dev_alloc() allocate fud->pq.processing.
But this hash table is not freed.

Fix this by freeing fud->pq.processing.
Signed-off-by: NTakeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: be2ff42c ("fuse: Use hash table to link processing request")
      d72f70da
  21. 22 11月, 2018 1 次提交
    • M
      fuse: Add bad inode check in fuse_destroy_inode() · 4fc4bb79
      由 Myungho Jung 提交于 
      make_bad_inode() sets inode->i_mode to S_IFREG if I/O error is detected
in fuse_do_getattr()/fuse_do_setattr(). If the inode is not a regular
file, write_files and queued_writes in fuse_inode are not initialized
and have NULL or invalid pointers written by other members in a union.
So, list_empty() returns false in fuse_destroy_inode(). Add
is_bad_inode() to check if make_bad_inode() was called.

Reported-by: syzbot+b9c89b84423073226299@syzkaller.appspotmail.com
Fixes: ab2257e9 ("fuse: reduce size of struct fuse_inode")
Signed-off-by: NMyungho Jung <mhjungk@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      4fc4bb79
  23. 15 10月, 2018 2 次提交
    • D
      fuse: enable caching of symlinks · 5571f1e6
      由 Dan Schatzberg 提交于 
      FUSE file reads are cached in the page cache, but symlink reads are
not. This patch enables FUSE READLINK operations to be cached which
can improve performance of some FUSE workloads.

In particular, I'm working on a FUSE filesystem for access to source
code and discovered that about a 10% improvement to build times is
achieved with this patch (there are a lot of symlinks in the source
tree).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      5571f1e6
    • M
      fuse: allow fine grained attr cache invaldation · 2f1e8196
      由 Miklos Szeredi 提交于 
      This patch adds the infrastructure for more fine grained attribute
invalidation.  Currently only 'atime' is invalidated separately.

The use of this infrastructure is extended to the statx(2) interface, which
for now means that if only 'atime' is invalid and STATX_ATIME is not
specified in the mask argument, then no GETATTR request will be generated.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      2f1e8196
  25. 01 10月, 2018 4 次提交
    • C
      fuse: add max_pages to init_out · 5da784cc
      由 Constantine Shulyupin 提交于 
      Replace FUSE_MAX_PAGES_PER_REQ with the configurable parameter max_pages to
improve performance.

Old RFC with detailed description of the problem and many fixes by Mitsuo
Hayasaka (mitsuo.hayasaka.hu@hitachi.com):
 - https://lkml.org/lkml/2012/7/5/136

We've encountered performance degradation and fixed it on a big and complex
virtual environment.

Environment to reproduce degradation and improvement:

1. Add lag to user mode FUSE
Add nanosleep(&(struct timespec){ 0, 1000 }, NULL); to xmp_write_buf in
passthrough_fh.c

2. patch UM fuse with configurable max_pages parameter. The patch will be
provided latter.

3. run test script and perform test on tmpfs
fuse_test()
{

       cd /tmp
       mkdir -p fusemnt
       passthrough_fh -o max_pages=$1 /tmp/fusemnt
       grep fuse /proc/self/mounts
       dd conv=fdatasync oflag=dsync if=/dev/zero of=fusemnt/tmp/tmp \
		count=1K bs=1M 2>&1 | grep -v records
       rm fusemnt/tmp/tmp
       killall passthrough_fh
}

Test results:

passthrough_fh /tmp/fusemnt fuse.passthrough_fh \
	rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0
1073741824 bytes (1.1 GB) copied, 1.73867 s, 618 MB/s

passthrough_fh /tmp/fusemnt fuse.passthrough_fh \
	rw,nosuid,nodev,relatime,user_id=0,group_id=0,max_pages=256 0 0
1073741824 bytes (1.1 GB) copied, 1.15643 s, 928 MB/s

Obviously with bigger lag the difference between 'before' and 'after'
will be more significant.

Mitsuo Hayasaka, in 2012 (https://lkml.org/lkml/2012/7/5/136),
observed improvement from 400-550 to 520-740.
Signed-off-by: NConstantine Shulyupin <const@MakeLinux.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      5da784cc
    • M
      fuse: reduce size of struct fuse_inode · ab2257e9
      由 Miklos Szeredi 提交于 
      Do this by grouping fields used for cached writes and putting them into a
union with fileds used for cached readdir (with obviously no overlap, since
we don't have hybrid objects).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      ab2257e9
    • M
      fuse: add readdir cache version · 3494927e
      由 Miklos Szeredi 提交于 
      Allow the cache to be invalidated when page(s) have gone missing.  In this
case increment the version of the cache and reset to an empty state.

Add a version number to the directory stream in struct fuse_file as well,
indicating the version of the cache it's supposed to be reading.  If the
cache version doesn't match the stream's version, then reset the stream to
the beginning of the cache.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      3494927e
    • M
      fuse: allow caching readdir · 69e34551
      由 Miklos Szeredi 提交于 
      This patch just adds the cache filling functions, which are invoked if
FOPEN_CACHE_DIR flag is set in the OPENDIR reply.

Cache reading and cache invalidation are added by subsequent patches.

The directory cache uses the page cache.  Directory entries are packed into
a page in the same format as in the READDIR reply.  A page only contains
whole entries, the space at the end of the page is cleared.  The page is
locked while being modified.

Multiple parallel readdirs on the same directory can fill the cache; the
only constraint is that continuity must be maintained (d_off of last entry
points to position of current entry).
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      69e34551
  27. 28 9月, 2018 2 次提交
  29. 26 7月, 2018 4 次提交
  31. 06 6月, 2018 1 次提交
    • D
      vfs: change inode times to use struct timespec64 · 95582b00
      由 Deepa Dinamani 提交于 
      struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
      95582b00
  33. 31 5月, 2018 3 次提交
  35. 23 3月, 2018 1 次提交
    • M
      fuse: define the filesystem as untrusted · 0834136a
      由 Mimi Zohar 提交于 
      Files on FUSE can change at any point in time without IMA being able
to detect it.  The file data read for the file signature verification
could be totally different from what is subsequently read, making the
signature verification useless.

FUSE can be mounted by unprivileged users either today with fusermount
installed with setuid, or soon with the upcoming patches to allow FUSE
mounts in a non-init user namespace.

This patch sets the SB_I_IMA_UNVERIFIABLE_SIGNATURE flag and when
appropriate sets the SB_I_UNTRUSTED_MOUNTER flag.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      0834136a
  37. 21 3月, 2018 2 次提交
    • E
      fuse: Support fuse filesystems outside of init_user_ns · 8cb08329
      由 Eric W. Biederman 提交于 
      In order to support mounts from namespaces other than init_user_ns, fuse
must translate uids and gids to/from the userns of the process servicing
requests on /dev/fuse. This patch does that, with a couple of restrictions
on the namespace:

 - The userns for the fuse connection is fixed to the namespace
   from which /dev/fuse is opened.

 - The namespace must be the same as s_user_ns.

These restrictions simplify the implementation by avoiding the need to pass
around userns references and by allowing fuse to rely on the checks in
setattr_prepare for ownership changes.  Either restriction could be relaxed
in the future if needed.

For cuse the userns used is the opener of /dev/cuse.  Semantically the cuse
support does not appear safe for unprivileged users.  Practically the
permissions on /dev/cuse only make it accessible to the global root user.
If something slips through the cracks in a user namespace the only users
who will be able to use the cuse device are those users mapped into the
user namespace.

Translation in the posix acl is updated to use the uuser namespace of the
filesystem.  Avoiding cases which might bypass this translation is handled
in a following change.

This change is stronlgy based on a similar change from Seth Forshee and
Dongsu Park.

Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      8cb08329
    • S
      fuse: return -ECONNABORTED on /dev/fuse read after abort · 3b7008b2
      由 Szymon Lukasz 提交于 
      Currently the userspace has no way of knowing whether the fuse
connection ended because of umount or abort via sysfs. It makes it hard
for filesystems to free the mountpoint after abort without worrying
about removing some new mount.

The patch fixes it by returning different errors when userspace reads
from /dev/fuse (-ENODEV for umount and -ECONNABORTED for abort).

Add a new capability flag FUSE_ABORT_ERROR. If set and the connection is
gone because of sysfs abort, reading from the device will return
-ECONNABORTED.
Signed-off-by: NSzymon Lukasz <noh4hss@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
      3b7008b2
  39. 28 11月, 2017 1 次提交
    • L
      Rename superblock flags (MS_xyz -> SB_xyz) · 1751e8a6
      由 Linus Torvalds 提交于 
      This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1751e8a6
  41. 16 11月, 2017 1 次提交