amx_test's binary should be present in the .gitignore file for the git
to ignore it.

Fixes: bf70636d ("selftest: kvm: Add amx selftest")
Signed-off-by: NMuhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Nullify svm_x86_ops.vcpu_(un)blocking if AVIC/APICv is disabled as the
hooks are necessary only to clear the vCPU's IsRunning entry in the
Physical APIC and to update IRTE entries if the VM has a pass-through
device attached.

Opportunistically rename the helpers to clarify their AVIC relationship.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-24-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move svm_hardware_setup() below svm_x86_ops so that KVM can modify ops
during setup, e.g. the vcpu_(un)blocking hooks can be nullified if AVIC
is disabled or unsupported.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-23-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop avic_set_running() in favor of calling avic_vcpu_{load,put}()
directly, and modify the block+put path to use preempt_disable/enable()
instead of get/put_cpu(), as it doesn't actually care about the current
pCPU associated with the vCPU.  Opportunistically add lockdep assertions
as being preempted in avic_vcpu_put() would lead to consuming stale data,
even though doing so _in the current code base_ would not be fatal.

Add a much needed comment explaining why svm_vcpu_blocking() needs to
unload the AVIC and update the IRTE _before_ the vCPU starts blocking.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-22-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When waking vCPUs in the posted interrupt wakeup handling, do exactly
that and no more.  There is no need to kick the vCPU as the wakeup
handler just needs to get the vCPU task running, and if it's in the guest
then it's definitely running.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-21-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the fallback "wake_up" path into the helper to trigger posted
interrupt helper now that the nested and non-nested paths are identical.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-20-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Refactor the posted interrupt helper to take the desired notification
vector instead of a bool so that the callers are self-documenting.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-19-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace the full "kick" with just the "wake" in the fallback path when
triggering a virtual interrupt via a posted interrupt fails because the
guest is not IN_GUEST_MODE.  If the guest transitions into guest mode
between the check and the kick, then it's guaranteed to see the pending
interrupt as KVM syncs the PIR to IRR (and onto GUEST_RVI) after setting
IN_GUEST_MODE.  Kicking the guest in this case is nothing more than an
unnecessary VM-Exit (and host IRQ).

Opportunistically update comments to explain the various ordering rules
and barriers at play.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-17-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Don't bother updating the Physical APIC table or IRTE when loading a vCPU
that is blocking, i.e. won't be marked IsRun{ning}=1, as the pCPU is
queried if and only if IsRunning is '1'.  If the vCPU was migrated, the
new pCPU will be picked up when avic_vcpu_load() is called by
svm_vcpu_unblocking().
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-15-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use kvm_vcpu_is_blocking() to determine whether or not the vCPU should be
marked running during avic_vcpu_load().  Drop avic_is_running, which
really should have been named "vcpu_is_not_blocking", as it tracked if
the vCPU was blocking, not if it was actually running, e.g. it was set
during svm_create_vcpu() when the vCPU was obviously not running.

This is technically a teeny tiny functional change, as the vCPU will be
marked IsRunning=1 on being reloaded if the vCPU is preempted between
svm_vcpu_blocking() and prepare_to_rcuwait().  But that's a benign change
as the vCPU will be marked IsRunning=0 when KVM voluntarily schedules out
the vCPU.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-14-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove handling of KVM_REQ_APICV_UPDATE from svm_vcpu_unblocking(), it's
no longer needed as it was made obsolete by commit df7e4827 ("KVM:
SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC").
Prior to that commit, the manual check was necessary to ensure the AVIC
stuff was updated by avic_set_running() when a request to enable APICv
became pending while the vCPU was blocking, as the request handling
itself would not do the update.  But, as evidenced by the commit, that
logic was flawed and subject to various races.

Now that svm_refresh_apicv_exec_ctrl() does avic_vcpu_load/put() in
response to an APICv status change, drop the manual check in the
unblocking path.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-13-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop the avic_vcpu_is_running() check when waking vCPUs in response to a
VM-Exit due to incomplete IPI delivery.  The check isn't wrong per se, but
it's not 100% accurate in the sense that it doesn't guarantee that the vCPU
was one of the vCPUs that didn't receive the IPI.

The check isn't required for correctness as blocking == !running in this
context.

From a performance perspective, waking a live task is not expensive as the
only moderately costly operation is a locked operation to temporarily
disable preemption.  And if that is indeed a performance issue,
kvm_vcpu_is_blocking() would be a better check than poking into the AVIC.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-12-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signal the AVIC doorbell iff the vCPU is running in the guest.  If the vCPU
is not IN_GUEST_MODE, it's guaranteed to pick up any pending IRQs on the
next VMRUN, which unconditionally processes the vIRR.

Add comments to document the logic.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211208015236.1616697-11-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop kvm_x86_ops' pre/post_block() now that all implementations are nops.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-10-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unexport switch_to_{hv,sw}_timer() now that common x86 handles the
transitions.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-9-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Handle the switch to/from the hypervisor/software timer when a vCPU is
blocking in common x86 instead of in VMX.  Even though VMX is the only
user of a hypervisor timer, the logic and all functions involved are
generic x86 (unless future CPUs do something completely different and
implement a hypervisor timer that runs regardless of mode).

Handling the switch in common x86 will allow for the elimination of the
pre/post_blocks hooks, and also lets KVM switch back to the hypervisor
timer if and only if it was in use (without additional params).  Add a
comment explaining why the switch cannot be deferred to kvm_sched_out()
or kvm_vcpu_block().
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-8-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and
rename the list and all associated variables to clarify that it tracks
the set of vCPU that need to be poked on a posted interrupt to the wakeup
vector.  The list is not used to track _all_ vCPUs that are blocking, and
the term "blocked" can be misleading as it may refer to a blocking
condition in the host or the guest, where as the PI wakeup case is
specifically for the vCPUs that are actively blocking from within the
guest.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-7-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove kvm_vcpu.pre_pcpu as it no longer has any users.  No functional
change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-6-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the posted interrupt pre/post_block logic into vcpu_put/load
respectively, using the kvm_vcpu_is_blocking() to determining whether or
not the wakeup handler needs to be set (and unset).  This avoids updating
the PI descriptor if halt-polling is successful, reduces the number of
touchpoints for updating the descriptor, and eliminates the confusing
behavior of intentionally leaving a "stale" PI.NDST when a blocking vCPU
is scheduled back in after preemption.

The downside is that KVM will do the PID update twice if the vCPU is
preempted after prepare_to_rcuwait() but before schedule(), but that's a
rare case (and non-existent on !PREEMPT kernels).

The notable wart is the need to send a self-IPI on the wakeup vector if
an outstanding notification is pending after configuring the wakeup
vector.  Ideally, KVM would just do a kvm_vcpu_wake_up() in this case,
but the scheduler doesn't support waking a task from its preemption
notifier callback, i.e. while the task is right in the middle of
being scheduled out.

Note, setting the wakeup vector before halt-polling is not necessary:
once the pending IRQ will be recorded in the PIR, kvm_vcpu_has_events()
will detect this (via kvm_cpu_get_interrupt(), kvm_apic_get_interrupt(),
apic_has_interrupt_for_ppr() and finally vmx_sync_pir_to_irr()) and
terminate the polling.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-5-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Bring in fix for VT-d posted interrupts before further changing the code in 5.17.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid warnings on s390 like
[ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G            E     5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1
[ 1801.980938] Workqueue: events irqfd_inject [kvm]
[...]
[ 1801.981057] Call Trace:
[ 1801.981060]  [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm]
[ 1801.981083]  [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm]
[ 1801.981104]  [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm]
[ 1801.981124]  [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm]
[ 1801.981144]  [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm]
[ 1801.981164]  [<0000000175e56906>] process_one_work+0x1fe/0x470
[ 1801.981173]  [<0000000175e570a4>] worker_thread+0x64/0x498
[ 1801.981176]  [<0000000175e5ef2c>] kthread+0x10c/0x110
[ 1801.981180]  [<0000000175de73c8>] __ret_from_fork+0x40/0x58
[ 1801.981185]  [<000000017698440a>] ret_from_fork+0xa/0x40

when writing to a guest from an irqfd worker as long as we do not have
the dirty ring.
Signed-off-by: NChristian Borntraeger <borntraeger@linux.ibm.com>
Reluctantly-acked-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com>
Fixes: 2efd61a6 ("KVM: Warn if mark_page_dirty() is called without an active vCPU")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a VMX specific test to verify that KVM doesn't explode if userspace
attempts KVM_RUN when emulation is required with a pending exception.
KVM VMX's emulation support for !unrestricted_guest punts exceptions to
userspace instead of attempting to synthesize the exception with all the
correct state (and stack switching, etc...).

Punting is acceptable as there's never been a request to support
injecting exceptions when emulating due to invalid state, but KVM has
historically assumed that userspace will do the right thing and either
clear the exception or kill the guest.  Deliberately do the opposite and
attempt to re-enter the guest with a pending exception and emulation
required to verify KVM continues to punt the combination to userspace,
e.g. doesn't explode, WARN, etc...
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211228232437.1875318-3-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reject KVM_RUN if emulation is required (because VMX is running without
unrestricted guest) and an exception is pending, as KVM doesn't support
emulating exceptions except when emulating real mode via vm86.  The vCPU
is hosed either way, but letting KVM_RUN proceed triggers a WARN due to
the impossible condition.  Alternatively, the WARN could be removed, but
then userspace and/or KVM bugs would result in the vCPU silently running
in a bad state, which isn't very friendly to users.

Originally, the bug was hit by syzkaller with a nested guest as that
doesn't require kvm_intel.unrestricted_guest=0.  That particular flavor
is likely fixed by commit cd0e615c ("KVM: nVMX: Synthesize
TRIPLE_FAULT for L2 if emulation is required"), but it's trivial to
trigger the WARN with a non-nested guest, and userspace can likely force
bad state via ioctls() for a nested guest as well.

Checking for the impossible condition needs to be deferred until KVM_RUN
because KVM can't force specific ordering between ioctls.  E.g. clearing
exception.pending in KVM_SET_SREGS doesn't prevent userspace from setting
it in KVM_SET_VCPU_EVENTS, and disallowing KVM_SET_VCPU_EVENTS with
emulation_required would prevent userspace from queuing an exception and
then stuffing sregs.  Note, if KVM were to try and detect/prevent the
condition prior to KVM_RUN, handle_invalid_guest_state() and/or
handle_emulation_failure() would need to be modified to clear the pending
exception prior to exiting to userspace.

 ------------[ cut here ]------------
 WARNING: CPU: 6 PID: 137812 at arch/x86/kvm/vmx/vmx.c:1623 vmx_queue_exception+0x14f/0x160 [kvm_intel]
 CPU: 6 PID: 137812 Comm: vmx_invalid_nes Not tainted 5.15.2-7cc36c3e14ae-pop #279
 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
 RIP: 0010:vmx_queue_exception+0x14f/0x160 [kvm_intel]
 Code: <0f> 0b e9 fd fe ff ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
 RSP: 0018:ffffa45c83577d38 EFLAGS: 00010202
 RAX: 0000000000000003 RBX: 0000000080000006 RCX: 0000000000000006
 RDX: 0000000000000000 RSI: 0000000000010002 RDI: ffff9916af734000
 RBP: ffff9916af734000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000006
 R13: 0000000000000000 R14: ffff9916af734038 R15: 0000000000000000
 FS:  00007f1e1a47c740(0000) GS:ffff99188fb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f1e1a6a8008 CR3: 000000026f83b005 CR4: 00000000001726e0
 Call Trace:
  kvm_arch_vcpu_ioctl_run+0x13a2/0x1f20 [kvm]
  kvm_vcpu_ioctl+0x279/0x690 [kvm]
  __x64_sys_ioctl+0x83/0xb0
  do_syscall_64+0x3b/0xc0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzbot+82112403ace4cbd780d8@syzkaller.appspotmail.com
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20211228232437.1875318-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Verify that the PMU event filter works as expected.

Note that the virtual PMU doesn't work as expected on AMD Zen CPUs (an
intercepted rdmsr is counted as a retired branch instruction), but the
PMU event filter does work.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-7-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extract the x86 model number from CPUID.01H:EAX.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-6-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move this static inline function to processor.h, so that it can be
used in individual tests, as needed.

Opportunistically replace the bare 'unsigned' with 'unsigned int.'
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-5-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace the one ad hoc "AuthenticAMD" CPUID vendor string comparison
with a new function, is_amd_cpu().
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-4-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Refactor is_intel_cpu() to make it easier to reuse the bulk of the
code for other vendors in the future.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-3-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The PMU event filter may contain up to 300 events. Replace the linear
search in reprogram_gp_counter() with a binary search.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220115052431.447232-2-jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vm_xsave_req_perm() is currently defined and used by x86_64 only.
Make it compiled into vm_create_with_vcpus() only when on x86_64
machines. Otherwise, it would cause linkage errors, e.g. on s390x.

Fixes: 415a3c33 ("kvm: selftests: Add support for KVM_CAP_XSAVE2")
Reported-by: NJanis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: NWei Wang <wei.w.wang@intel.com>
Tested-by: NJanis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

According to Intel extended feature disable (XFD) spec, the sub-function i
(i > 1) of CPUID function 0DH enumerates "details for state component i.
ECX[2] enumerates support for XFD support for this state component."

If KVM does not report F(XFD) feature (e.g. due to CONFIG_X86_64),
then the corresponding XFD support for any state component i
should also be removed. Translate this dependency into KVM terms.

Fixes: 690a757d ("kvm: x86: Add CPUID support for Intel AMX")
Signed-off-by: NLike Xu <likexu@tencent.com>
Message-Id: <20220117074531.76925-1-likexu@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rewrite the comment in kvm_mmu_slot_remove_write_access() that explains
why it is safe to flush TLBs outside of the MMU lock after
write-protecting SPTEs for dirty logging. The current comment is a long
run-on sentence that was difficult to understand. In addition it was
specific to the shadow MMU (mentioning mmu_spte_update()) when the TDP
MMU has to handle this as well.

The new comment explains:
 - Why the TLB flush is necessary at all.
 - Why it is desirable to do the TLB flush outside of the MMU lock.
 - Why it is safe to do the TLB flush outside of the MMU lock.

No functional change intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20220113233020.3986005-5-dmatlack@google.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SPTEs are tagged with software-only bits to indicate if it is
"MMU-writable" and "Host-writable". These bits are used to determine why
KVM has marked an SPTE as read-only.

Document these bits and their invariants, and enforce the invariants
with new WARNs in spte_can_locklessly_be_made_writable() to ensure they
are not accidentally violated in the future.

Opportunistically move DEFAULT_SPTE_{MMU,HOST}_WRITABLE next to
EPT_SPTE_{MMU,HOST}_WRITABLE since the new documentation applies to
both.

No functional change intended.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20220113233020.3986005-4-dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When handling the changed_pte notifier and the new PTE is read-only,
clear both the Host-writable and MMU-writable bits in the SPTE. This
preserves the invariant that MMU-writable is set if-and-only-if
Host-writable is set.

No functional change intended. Nothing currently relies on the
aforementioned invariant and technically the changed_pte notifier is
dead code.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20220113233020.3986005-3-dmatlack@google.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the TDP MMU is write-protection GFNs for page table protection (as
opposed to for dirty logging, or due to the HVA not being writable), it
checks if the SPTE is already write-protected and if so skips modifying
the SPTE and the TLB flush.

This behavior is incorrect because it fails to check if the SPTE
is write-protected for page table protection, i.e. fails to check
that MMU-writable is '0'.  If the SPTE was write-protected for dirty
logging but not page table protection, the SPTE could locklessly be made
writable, and vCPUs could still be running with writable mappings cached
in their TLB.

Fix this by only skipping setting the SPTE if the SPTE is already
write-protected *and* MMU-writable is already clear.  Technically,
checking only MMU-writable would suffice; a SPTE cannot be writable
without MMU-writable being set.  But check both to be paranoid and
because it arguably yields more readable code.

Fixes: 46044f72 ("kvm: x86/mmu: Support write protection for nesting in tdp MMU")
Cc: stable@vger.kernel.org
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Message-Id: <20220113233020.3986005-2-dmatlack@google.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

blocked_vcpu_on_cpu_lock is taken from hard interrupt context
(pi_wakeup_handler), therefore it cannot sleep.

Switch it to a raw spinlock.

Fixes:

[41297.066254] BUG: scheduling while atomic: CPU 0/KVM/635218/0x00010001
[41297.066323] Preemption disabled at:
[41297.066324] [<ffffffff902ee47f>] irq_enter_rcu+0xf/0x60
[41297.066339] Call Trace:
[41297.066342]  <IRQ>
[41297.066346]  dump_stack_lvl+0x34/0x44
[41297.066353]  ? irq_enter_rcu+0xf/0x60
[41297.066356]  __schedule_bug.cold+0x7d/0x8b
[41297.066361]  __schedule+0x439/0x5b0
[41297.066365]  ? task_blocks_on_rt_mutex.constprop.0.isra.0+0x1b0/0x440
[41297.066369]  schedule_rtlock+0x1e/0x40
[41297.066371]  rtlock_slowlock_locked+0xf1/0x260
[41297.066374]  rt_spin_lock+0x3b/0x60
[41297.066378]  pi_wakeup_handler+0x31/0x90 [kvm_intel]
[41297.066388]  sysvec_kvm_posted_intr_wakeup_ipi+0x9d/0xd0
[41297.066392]  </IRQ>
[41297.066392]  asm_sysvec_kvm_posted_intr_wakeup_ipi+0x12/0x20
...
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The new module parameter to control PMU virtualization should apply
to Intel as well as AMD, for situations where userspace is not trusted.
If the module parameter allows PMU virtualization, there could be a
new KVM_CAP or guest CPUID bits whereby userspace can enable/disable
PMU virtualization on a per-VM basis.

If the module parameter does not allow PMU virtualization, there
should be no userspace override, since we have no precedent for
authorizing that kind of override. If it's false, other counter-based
profiling features (such as LBR including the associated CPUID bits
if any) will not be exposed.

Change its name from "pmu" to "enable_pmu" as we have temporary
variables with the same name in our code like "struct kvm_pmu *pmu".

Fixes: b1d66dad ("KVM: x86/svm: Add module param to control PMU virtualization")
Suggested-by : Jim Mattson <jmattson@google.com>
Signed-off-by: NLike Xu <likexu@tencent.com>
Message-Id: <20220111073823.21885-1-likexu@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless
the supplied CPUID data is equal to what was previously set. Test this.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In preparation to reusing the existing 'get_cpuid_test' for testing
"KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid
the confusion.

No functional change intended.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
forbade changing CPUID altogether but unfortunately this is not fully
compatible with existing VMMs. In particular, QEMU reuses vCPU fds for
CPU hotplug after unplug and it calls KVM_SET_CPUID2. Instead of full ban,
check whether the supplied CPUID data is equal to what was previously set.
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Fixes: feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220117150542.2176196-3-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
[Do not call kvm_find_cpuid_entry repeatedly. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>