- 09 6月, 2010 12 次提交
-
-
由 Peter Zijlstra 提交于
Currently there are perf_buffer_alloc() + perf_buffer_init() + some separate bits, fold it all into a single perf_buffer_alloc() and only leave the attachment to the event separate. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Rename to clarify code. s/perf_mmap_data/perf_buffer/g and selective s/data/buffer/g Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
On Netburst PMU we need a second write to a performance counter due to cpu erratum. A simple flag test instead of alternative instructions was choosen because wrmsrl is already a macro and if virtualization is turned on will need an additional wrapper call which is more expencise. nb: we should propably switch to jump-labels as only this facility reach the mainline. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100602212304.GC5264@lenovo> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Clarify some of the transactional group scheduling API details and change it so that a successfull ->commit_txn also closes the transaction. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1274803086.5882.1752.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eric B Munson 提交于
Add the capacility to track data mmap()s. This can be used together with PERF_SAMPLE_ADDR for data profiling. Signed-off-by: NAnton Blanchard <anton@samba.org> [Updated code for stable perf ABI] Signed-off-by: NEric B Munson <ebmunson@us.ibm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1274193049-25997-1-git-send-email-ebmunson@us.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
__DO_TRACE() already calls the callbacks under rcu_read_lock_sched(), which is sufficient for our needs, avoid doing it again. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Inline perf_swevent_put_recursion_context into perf_tp_event(), this shrinks the per trace template code footprint and saves a function call. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Livio Soares 提交于
Fixes to 'cpuid10_edx' to comply with Intel documentation. According to the Intel Manual, Volume 2A, Table 3-12, the cpuid for architecture performance monitoring returns, in EDX, two pieces of information: 1) Number of fixed-function counters (5 bits, not 4) 2) Width of fixed-function counters (8 bits) Signed-off-by: NLivio Soares <livio@eecg.toronto.edu> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
-
由 Ingo Molnar 提交于
Merge branch 'tip/perf/core-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
-
由 Ingo Molnar 提交于
Merge branch 'for-tip' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
-
由 Peter Zijlstra 提交于
Frederic reported that frequency driven swevents didn't work properly and even caused a division-by-zero error. It turns out there are two bugs, the division-by-zero comes from a failure to deal with that in perf_calculate_period(). The other was more interesting and turned out to be a wrong comparison in perf_adjust_period(). The comparison was between an s64 and u64 and got implicitly converted to an unsigned comparison. The problem is that period_left is typically < 0, so it ended up being always true. Cure this by making the local period variables s64. Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Tested-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 6月, 2010 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
So that we don't require that the kernel be configured first, and as we don't use KERNELRELEASE at all in the -src-pkg targets, we need o add a new wildcard for targets ending in src-pkg: On a make mrproper'ed kernel we get this without this patch: [linux-2.6-tip]$ LANG= make perf-tarbz2-src-pkg /bin/sh: include/config/kernel.release: No such file or directory make: *** [include/config/kernel.release] Error 1 [acme@emilia linux-2.6-tip]$ Acked-by: NMichal Marek <mmarek@suse.cz> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100604173552.GA875@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Denis Kirjanov 提交于
Fix potential initial_lfsr buffer overrun. Writing past the end of the buffer could happen when index == ENTRIES Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Cc: stable@kernel.org Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
- 05 6月, 2010 7 次提交
-
-
由 Arun Sharma 提交于
In a shared multi-core environment, users want to analyze why their program was slow. In particular, if the code ran slower only on certain CPUs due to interference from other programs or kernel threads, the user should be able to notice that. Sample usage: perf record -f -a -- sleep 3 perf report --sort cpu,comm Workload: program is running on 16 CPUs Experiencing interference from an antagonist only on 4 CPUs. Samples: 106218177676 cycles Overhead CPU Command ........ ... ............... 6.25% 2 program 6.24% 6 program 6.24% 11 program 6.24% 5 program 6.24% 9 program 6.24% 10 program 6.23% 15 program 6.23% 7 program 6.23% 3 program 6.23% 14 program 6.22% 1 program 6.20% 13 program 3.17% 12 program 3.15% 8 program 3.14% 0 program 3.13% 4 program 3.11% 4 antagonist 3.11% 0 antagonist 3.10% 8 antagonist 3.07% 12 antagonist Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100505181612.GA5091@sharma-home.net> Signed-off-by: NArun Sharma <aruns@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Simplifying the tools that were using both in sequence and allowing upcoming simplifications, such as Arun's patch to sort by cpus. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
Perf report is demangling symbols but not annotate. The former uses internal demangling via libbdf or libiberty. The latter executes objdump which by default does not demangle symbols. This patch adds the -C option to the objdump cmdline to enable symbol demangling. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c07b323.2126e30a.6245.0e1e@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: NMichal Marek <mmarek@suse.cz> Acked-by: NSam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch adds a -C option to stat, record, top to designate a list of CPUs to monitor. CPUs can be specified as a comma-separated list or ranges, no space allowed. Examples: $ perf record -a -C0-1,4-7 sleep 1 $ perf top -C0-4 $ perf stat -a -C1,2,3,4 sleep 1 With perf record in per-thread mode with inherit mode on, samples are collected only when the thread runs on the designated CPUs. The -C option does not turn on system-wide mode automatically. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4bff9496.d345d80a.41fe.7b00@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
It is useful to know on which CPU a sample was captured on. The information is captured with perf record -R but it was not printed out by perf report -D. This patch adds this. When -R is not used, cpu is set to -1to indicate that the CPU is unknown (it is not captured). Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4bff964c.e88cd80a.3106.7d31@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 6月, 2010 4 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
-
由 Arnaldo Carvalho de Melo 提交于
We need to set the long name to the name specified via, for instance, 'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as '[kernel.kallsyms]' and that will make annotate fail when passing this as the vmlinux name in the call to objdump. The way this is setup grew unwieldly and dso__load_vmlinux is the function that should allocate space for the long name, with callers not assuming that filenames should be allocated somehow by then (strdup, dso__build_id_filename, etc). For now this is the minimalistic patch, a proper fix for .36 will be made. Reported-by: NStephane Eranian <eranian@google.com> Tested-by: NStephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100604003900.GD10469@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Steven Rostedt 提交于
The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The function tracer code uses ftrace_preempt_disable() to disable preemption instead of normal preempt_disable(). But there's a slight race condition that may cause it to lose a preemption check. This was made to keep the function tracer from recursing on itself by disabling preemption then having the enable call the function tracer again, causing infinite recursion. The bug was assumed to happen if the call was just in schedule, but this is incorrect. The bug is caused by preempt_schedule() which is called by preempt_enable(). The calling of preempt_enable() when NEED_RESCHED was set would call preempt_schedule() which would call the function tracer again. By making the preempt_schedule() and add_preempt_count() notrace then this will prevent the inifinite recursion. This is because the add_preempt_count() would stop the preempt_enable() in the function tracer from calling preempt_schedule() again. The sub_preempt_count() is also made notrace just to keep it symmetric. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 03 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Frederic reported that because swevents handling doesn't disable IRQs anymore, we can get a recursion of perf_adjust_period(), once from overflow handling and once from the tick. If both call ->disable, we get a double hlist_del_rcu() and trigger a LIST_POISON2 dereference. Since we don't actually need to stop/start a swevent to re-programm the hardware (lack of hardware to program), simply nop out these callbacks for the swevent pmu. Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1275557609.27810.35218.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 6月, 2010 2 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
-
由 Arnaldo Carvalho de Melo 提交于
When we use plain 'perf buildid-list' we use only what is in the buildid table in the perf.data header. And those have absolute pathnames because at 'perf record' time we used __perf_session__process_events and that doesn't sets up the path shortening code in map__new() that happens if symbol_conf.full_paths is false, the default. On the other hand, when we use 'perf buildid-list --with-hits' we process all the events using perf_session__process_events, adding entries to the global DSO list _after_ removing the current directory from the DSO name, for presentation purposes. Because of that we end up having two entries in the DSO list when recording events for binaries using relative pathnames. Fix it minimally by setting symbol_conf.full_paths to true when marking the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf archive' Right fix longer term is to shorten the path only at presentation time. Will be done for 2.6.36. Reported-by: NStephane Eranian <eranian@google.com> Tested-by: NStephane Eranian <eranian@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100601183837.GC4093@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 6月, 2010 6 次提交
-
-
由 Pierre Tardy 提交于
trace_unhandled() callback does not allow to access event fields, this patch resolves the problem. It can also been used as a more pythonic and flexible way for script writters to demux event types This will for example greatly simplify pytimechart event demux. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NTom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu>, Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com> Signed-off-by: NPierre Tardy <tardyp@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Konstantin Stepanyuk 提交于
hist_entry__annotate() runs objdump with -S option so the output may contain lines of any format. If a line starts with a colon strtoull() returns 0 and calculated offset will be negative. This causes perf annotate segfaults. Make sure that strtoull() has parsed at least one digit. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NKonstantin Stepanyuk <konstantin.stepanyuk@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
When forking the child to be traced, we should check the correct return value from fork() and not a local variable which is otherwise unused. Signed-off-by: NBorislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100531211818.GA30175@liondog.tnic> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Frederic Weisbecker 提交于
event__process_task() doesn't propagate the comm copy on clone, but only on process fork. So we loose all the tid:comm resolution for tasks that aren't a main process thread. Progragate the per thread granularity to event__process_task for pid resolution. This fixes various unresolved pids in perf sched, especially when we trace multithread processes. The problem is quickly reproducible with the messaging benchmark using the multithread mode "-t" : perf sched record perf bench sched messaging -t Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
-
由 Frederic Weisbecker 提交于
perf sched uses event__process_comm(), which means it can resolve comms from: - tasks that have exec'ed (kernel comm events) - tasks that were running when perf record started the actual recording (synthetized comm events) But perf sched can't resolve the pids of tasks that were created after the recording started. To solve this, we need to inherit the comms on fork events using event__process_task(). This fixes various unresolved pids in perf sched, easily visible with: perf sched record perf bench sched messaging Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
-
由 Frederic Weisbecker 提交于
When we synthetize the existing running tasks though procfs, we walk through every threads of a process, queuing one comm events per tid. But then on report time, event__process_comm() only creates and sets the comm on a per process granularity. This is the right thing for comm events that came from the kernel, as they are only created on exec. Sub-threads then inherit their comm from fork events. But that doesn't work with our synthetized comm events taken from procfs informations as the per thread granularity is done on comm events directly there. Hence we need event__process_comm() to work with the tid rather than the pid. It won't change anything for comm events coming from the kernel but this will fix the synthetized ones. Before: $ ./perf report -D | grep COMM | grep firefox 0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5297 After: $ ./perf report -D | grep COMM | grep firefox 0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297 0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5299 0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5300 0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5308 0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5309 0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5312 This fixes various unresolved pid on perf sched. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Stephane Eranian <eranian@google.com>
-
- 31 5月, 2010 6 次提交
-
-
由 Randy Dunlap 提交于
Fix blktrace.c kernel-doc warnings: Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore' Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
If a sample size crosses to the next page boundary, the copy will be made in more than one step. However we forget to advance the source offset for the next copy, leading to unexpected double copies that completely mess up the traces. This fixes various kinds of bad traces that have irrelevant data inside, as an example: geany-4979 [001] 5758.077775: sched_switch: prev_comm=! prev_pid=121 prev_prio=0 prev_state=S|D|Z|X|x ==> next_comm= next_pid=7497072 next_prio=0 Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274988898-5639-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
The transactional API patch between the generic and model-specific code introduced several important bugs with event scheduling, at least on X86. If you had pinned events, e.g., watchdog, and were over-committing the PMU, you would get bogus counts. The bug was showing up on Intel CPU because events would move around more often that on AMD. But the problem also existed on AMD, though harder to expose. The issues were: - group_sched_in() was missing a cancel_txn() in the error path - cpuc->n_added was not properly maintained, leading to missing actions in hw_perf_enable(), i.e., n_running being 0. You cannot update n_added until you know the transaction has succeeded. In case of failed transaction n_added was not adjusted back. - in case of failed transactions, event_sched_out() was called and eventually invoked x86_disable_event() to touch the HW reg. But with transactions, on X86, event_sched_in() does not touch HW registers, it simply collects events into a list. Thus, you could end up calling x86_disable_event() on a counter which did not correspond to the current event when idx != -1. The patch modifies the generic and X86 code to avoid all those problems. First, we keep track of the number of events added last. In case the transaction fails, we substract them from n_added. This approach is necessary (as opposed to delaying updates to n_added) because not all event updates use the transaction API, e.g., single events. Second, we encapsulate the event_sched_in() and event_sched_out() in group_sched_in() inside the transaction. That makes the operations symmetrical and you can also detect that you are inside a transaction and skip the HW reg access by checking cpuc->group_flag. With this patch, you can now overcommit the PMU even with pinned system-wide events present and still get valid counts. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274796225.5882.1389.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Steve spotted I forgot to do the destroy under event_mutex. Reported-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274451913.1674.1707.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
tracepoint_probe_unregister() does not synchronize against the probe callbacks, so do that explicitly. This properly serializes the callbacks and the free of the data used therein. Also, use this_cpu_ptr() where possible. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1274438476.1674.1702.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Group siblings don't pin each-other or the parent, so when we destroy events we must make sure to clean up all cross referencing pointers. In particular, for destruction of a group leader we must be able to find all its siblings and remove their reference to it. This means that detaching an event from its context must not detach it from the group, otherwise we can end up failing to clear all pointers. Solve this by clearly separating the attachment to a context and attachment to a group, and keep the group composed until we destroy the events. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-