We can't deal with syncookie mode yet, the syncookie rx path will create
tcp reqsk, i.e. we get OOB access because we treat tcp reqsk as mptcp reqsk one:

TCP: SYN flooding on port 20002. Sending cookies.
BUG: KASAN: slab-out-of-bounds in subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
Read of size 1 at addr ffff8881167bc148 by task syz-executor099/2120
 subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
 tcp_get_cookie_sock+0xcf/0x520 net/ipv4/syncookies.c:209
 cookie_v6_check+0x15a5/0x1e90 net/ipv6/syncookies.c:252
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1123 [inline]
 [..]

Bug can be reproduced via "sysctl net.ipv4.tcp_syncookies=2".

Note that MPTCP should work with syncookies (4th ack would carry needed
state), but it appears better to sort that out in -next so do tcp
fallback for now.

I removed the MPTCP ifdef for tcp_rsk "is_mptcp" member because
if (IS_ENABLED()) is easier to read than "#ifdef IS_ENABLED()/#endif" pair.

Cc: Eric Dumazet <edumazet@google.com>
Fixes: cec37a6e ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reported-by: NChristoph Paasch <cpaasch@apple.com>
Tested-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch extends UDP GRO to support fraglist GRO/GSO
by using the previously introduced infrastructure.
If the feature is enabled, all UDP packets are going to
fraglist GRO (local input and forward).

After validating the csum,  we mark ip_summed as
CHECKSUM_UNNECESSARY for fraglist GRO packets to
make sure that the csum is not touched.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request,
to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to
the final ACK of the three-way handshake.

Use the .sk_rx_dst_set() handler in the subflow proto to capture when the
responding SYN-ACK is received and notify the MPTCP connection layer.
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Co-developed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPeter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements the infrastructure for MPTCP sockets.

MPTCP sockets open one in-kernel TCP socket per subflow. These subflow
sockets are only managed by the MPTCP socket that owns them and are not
visible from userspace. This commit allows a userspace program to open
an MPTCP socket with:

  sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP);

The resulting socket is simply a wrapper around a single regular TCP
socket, without any of the MPTCP protocol implemented over the wire.
Co-developed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Co-developed-by: NPeter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: NPeter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in the same manner as commit d0f41851 ("net, ip_tunnel: fix
namespaces move"), fix namespace moving as it was broken since commit
8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnel"), but for
ipv6 this time; there is no reason to keep it for ip6_tunnel.

Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnel")
Signed-off-by: NWilliam Dauchy <w.dauchy@criteo.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After LRO/GRO is applied, SRv6 encapsulated packets have
SKB_GSO_IPXIP6 feature flag, and this flag must be removed right after
decapulation procedure.

Currently, SKB_GSO_IPXIP6 flag is not removed on End.D* actions, which
creates inconsistent packet state, that is, a normal TCP/IP packets
have the SKB_GSO_IPXIP6 flag. This behavior can cause unexpected
fallback to GSO on routing to netdevices that do not support
SKB_GSO_IPXIP6. For example, on inter-VRF forwarding, decapsulated
packets separated into small packets by GSO because VRF devices do not
support TSO for packets with SKB_GSO_IPXIP6 flag, and this degrades
forwarding performance.

This patch removes encapsulation related GSO flags from the skb right
after the End.D* action is applied.

Fixes: d7a669dd ("ipv6: sr: add helper functions for seg6local")
Signed-off-by: NYuki Taguchi <tagyounit@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for moving IPv4 GRE tunnels between namespaces was added in
commit b57708ad ("gre: add x-netns support"). The respective change
for IPv6 tunnels, commit 22f08069 ("ip6gre: add x-netns support")
did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to
another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from
ip6gre tunnels to allow moving ip6gre tunnel endpoints between network
namespaces.
Signed-off-by: NNiko Kortstrom <niko.kortstrom@nokia.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 9b42c1f1 ("xfrm: Extend the output_mark") added output_mark
support but missed ESP offload support.

xfrm_smark_get() is not called within xfrm_input() for packets coming
from esp4_gro_receive() or esp6_gro_receive(). Therefore call
xfrm_smark_get() directly within these functions.

Fixes: 9b42c1f1 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: NUlrich Weber <ulrich.weber@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

In a similar fashion to previous patch, add "offload" and "trap"
indication to IPv6 routes.

This is done by using two unused bits in 'struct fib6_info' to hold
these indications. Capable drivers are expected to set these when
processing the various in-kernel route notifications.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function,
iterating over the return value from udp_rcv_segment, which actually is
a wrapper around skb_gso_segment.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With an ebpf program that redirects packets through a vti[6] interface,
the packets are dropped because no dst is attached.

This could also be reproduced with an AF_PACKET socket, with the following
python script (vti1 is an ip_vti interface):

 import socket
 send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('vti1', 0x800, 0, 0))
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

MPTCP will make use of tcp_send_mss() and tcp_push() when sending
data to specific TCP subflows.

tcp_request_sock_ipvX_ops and ipvX_specific will be referenced
during TCP subflow creation.
Co-developed-by: NPeter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: NPeter Krystad <peter.krystad@linux.intel.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The argument is always ignored, so remove it.
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for userspace to specify a device index to limit the scope
of an entry via the TCP_MD5SIG_EXT setsockopt. The existing __tcpm_pad
is renamed to tcpm_ifindex and the new field is only checked if the new
TCP_MD5SIG_FLAG_IFINDEX is set in tcpm_flags. For now, the device index
must point to an L3 master device (e.g., VRF). The API and error
handling are setup to allow the constraint to be relaxed in the future
to any device index.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add l3index to tcp_md5sig_key to represent the L3 domain of a key, and
add l3index to tcp_md5_do_add and tcp_md5_do_del to fill in the key.

With the key now based on an l3index, add the new parameter to the
lookup functions and consider the l3index when looking for a match.

The l3index comes from the skb when processing ingress packets leveraging
the helpers created for socket lookups, tcp_v4_sdif and inet_iif (and the
v6 variants). When the sdif index is set it means the packet ingressed a
device that is part of an L3 domain and inet_iif points to the VRF device.
For egress, the L3 domain is determined from the socket binding and
sk_bound_dev_if.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The original ingress device index is saved to the cb space of the skb
and the cb is moved during tcp processing. Since tcp_v6_inbound_md5_hash
can be called before and after the cb move, pass dif and sdif to it so
the caller can save both prior to the cb move. Both are used by a later
patch.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that mlxsw is converted to use the new FIB notifications it is
possible to delete the old ones and use the new replace / append /
delete notifications.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an entire multipath route is deleted, only emit a notification if
it is the first route in the node. Emit a replace notification in case
the last sibling is followed by another route. Otherwise, emit a delete
notification.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the purpose of route offload, when a single route is deleted, it is
only of interest if it is the first route in the node or if it is
sibling to such a route.

In the first case, distinguish between several possibilities:

1. Route is the last route in the node. Emit a delete notification

2. Route is followed by a non-multipath route. Emit a replace
notification for the non-multipath route.

3. Route is followed by a multipath route. Emit a replace notification
for the multipath route.

In the second case, only emit a delete notification to ensure the route
is no longer used as a valid nexthop.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a new listener is registered to the FIB notification chain it
receives a dump of all the available routes in the system. Instead, make
sure to only replay the IPv6 routes that are actually used in the data
path and are of any interest to the new listener.

This is done by iterating over all the routing tables in the given
namespace, but from each traversed node only the first route ('leaf') is
notified. Multipath routes are notified in a single notification instead
of one for each nexthop.

Add fib6_rt_dump_tmp() to do that. Later on in the patch set it will be
renamed to fib6_rt_dump() instead of the existing one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a similar fashion to previous patches, only notify the new multipath
route if it is the first route in the node or if it was appended to such
route.

The type of the notification (replace vs. append) is determined based on
the number of routes added ('nhn') and the number of sibling routes. If
the two do not match, then an append notification should be sent.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the corresponding IPv4 patch, only notify the new route if it
is replacing the currently offloaded one. Meaning, the one pointed to by
'fn->leaf'.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib6_add_rt2node() takes care of adding a single route ('struct
fib6_info') to a FIB node. The route in question should only be notified
in case it is added as the first route in the node (lowest metric) or if
it is added as a sibling route to the first route in the node.

The first criterion can be tested by checking if the route is pointed to
by 'fn->leaf'. The second criterion can be tested by checking the new
'notify_sibling_rt' variable that is set when the route is added as a
sibling to the first route in the node.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

Although vti and vti6 are immune to this problem because they are IFF_NOARP
interfaces, as Guillaume pointed. There is still no sense to confirm neighbour
here.

v5: Update commit description.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.

v5: No Change.
v4: Update commit description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Fixes: 0dec879f ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP")
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Tested-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.

But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.

Fix this by disable neigh confirm when do pmtu update

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reported-by: NJianlin Shi <jishi@redhat.com>
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
  - tnl_update_pmtu()
    - skb_dst_update_pmtu()
      - ip6_rt_update_pmtu()
        - __ip6_rt_update_pmtu()
          - dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
    dst_ops.update_pmtu to control whether we should do neighbor confirm.
    Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Suggested-by: NDavid Miller <davem@davemloft.net>
Reviewed-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 4b1373de ("net: ipv6: addr: perform strict checks also for
doit handlers") we add strict check for inet6_rtm_getaddr(). But we did
the invalid header values check before checking if NETLINK_F_STRICT_CHK
is set. This may break backwards compatibility if user already set the
ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code.

I didn't move the nlmsg_len check because I thought it's a valid check.
Reported-by: NJianlin Shi <jishi@redhat.com>
Fixes: 4b1373de ("net: ipv6: addr: perform strict checks also for doit handlers")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.comCo-developed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net

ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.

All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().

This requires some changes in all the callers, as these two functions
take different arguments and have different return types.

Fixes: 5f81bd2e ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: NXiumei Mu <xmu@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow,
as some modules currently pass a net argument without a socket to
ip6_dst_lookup. This is equivalent to commit 343d60aa ("ipv6: change
ipv6_stub_impl.ipv6_dst_lookup to take net argument").
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Note that the sysctl write accessor functions guarantee that:
  net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.

ie. even though
  if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
  if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
  if (snum < low || snum > high) {
which is equivalent to:
  if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.

But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).

Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

End.DT6 behavior makes use of seg6_lookup_nexthop() function which drops
all packets that are destined to be locally processed. However, DT* should
be able to deliver decapsulated packets that are destined to local
addresses. Function seg6_lookup_nexthop() is also used by DX6, so in order
to maintain compatibility I created another routing helper function which
is called seg6_lookup_any_nexthop(). This function is able to take into
account both packets that have to be processed locally and the ones that
are destined to be forwarded directly to another machine. Hence,
seg6_lookup_any_nexthop() is used in DT6 rather than seg6_lookup_nexthop()
to allow local delivery.
Signed-off-by: NAndrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NET_RAW is less dangerous, so more likely to be available to a process,
so check it first to prevent some spurious logging.

This matches IP_TRANSPARENT which checks NET_RAW first.
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When doing RX batch packet processing, we currently always repeat
the route lookup for each ingress packet. When no custom rules are
in place, and there aren't routes depending on source addresses,
we know that packets with the same destination address will use
the same dst.

This change tries to avoid per packet route lookup caching
the destination address of the latest successful lookup, and
reusing it for the next packet when the above conditions are
in place. Ingress traffic for most servers should fit.

The measured performance delta under UDP flood vs a recvmmsg
receiver is as follow:

vanilla		patched		delta
Kpps		Kpps		%
1431		1674		+17

In the worst-case scenario - each packet has a different
destination address - the performance delta is within noise
range.

v3 -> v4:
 - support hints for SUBFLOW build, too (David A.)
 - several style fixes (Eric)

v2 -> v3:
 - add fib6_has_custom_rules() helpers (David A.)
 - add ip6_extract_route_hint() helper (Edward C.)
 - use hint directly in ip6_list_rcv_finish() (Willem)

v1 -> v2:
 - fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES
 - fix potential race when fib6_has_custom_rules is set
   while processing a packet batch
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a per namespace counter, increment it on successful creation
of any route using the source address, decrement it on deletion
of such routes.

This allows us to check easily if the routing decision in the
current namespace depends on the packet source. Will be used
by the next patch.
Suggested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style.  This fixes various indentation mixups (seven spaces,
tab+one space, etc).
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously we will return directly if (!rt || !rt->fib6_nh.fib_nh_gw_family)
in function rt6_probe(), but after commit cc3a86c8
("ipv6: Change rt6_probe to take a fib6_nh"), the logic changed to
return if there is fib_nh_gw_family.

Fixes: cc3a86c8 ("ipv6: Change rt6_probe to take a fib6_nh")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>