The USB OTG binding we have mandates to have a dr_mode property, yet not
all boards are setting it.

Since the generic otg binding states that the default mode should be the
OTG mode, let's use that one in our DTSI.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The NAND pinctrl nodes names don't follow the pattern we've used and
enforced for some time. Make sure they do.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The children nodes of the pinctrl node hadn't have any reg property for
quite some time, so we don't need the size-cells property. Remove it.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The SATA controller never have any children nodes, so we don't need the
address and size cells properties.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The AHCI node was introduced with a typo in the reset-names property that
got written resets-name instead.

This was working because the reset is optional for that driver, and the
controller was put out of reset by the bootloader.

Fixes: 41c64d33 ("ARM: dts: sun8i: r40: add sata node")
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Even though it doesn't make any difference at the binary level, the reg
property is an array of cells, and should be represented as such.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The regulator properties suffix is -supply, yet a _supply slipped in.

This was working because the regulator framework will provide a dummy
regulator when none is provided in the device tree, and the regulator
itself was always enabled.

Fixes: 90c5d7cd ("ARM: dts: sun8i: a711: Add regulator support")
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Even though we shouldn't really have any external user of the clock
provided by the TCON, if clock-output-names is set, then #clock-cells must
be there as well.

Fix this.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

While the USB PHY Device Tree mandates that the name of the VBUS detect pin
should be usb0_vbus_det-gpios, a significant number of device tree use
usb0_vbus_det-gpio instead.

This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

While the USB PHY Device Tree mandates that the name of the ID detect pin
should be usb0_id_det-gpios, a significant number of device tree use
usb0_id_det-gpio instead.

This was functional because the GPIO framework falls back to the gpio
suffix that is legacy, but we should fix this.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The i2c-gpio driver uses named gpios now and the array of GPIOs is
deprecated. Switch to the new binding.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

As can be shown by the YAML schema now, the combination of GIC compatibles
we were using has never been an option.

Switch to the gic-400 variant, which is the more correct option.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Some nodes still have pinctrl-names entry, yet they don't have any pinctrl
group anymore. Drop them.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Commit 1848f3f4 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid
warnings") was wrong on the optimus, and instead of droping the
pinctrl-names property, it dropped the regulator-name one.

Obviously, that wasn't what was intended. Reinstate regulator-name and drop
pinctrl-names.

Fixes: 1848f3f4 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings")
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The A23 and A33 both have an I2C controller in the ARISC domain, that share
the same pins with the RSB bus.

Even if it's an unusual configuration, that device can be used to drive the
PMIC, so let's use it.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The DSI bindings require that an address cell size of 1, and a size cell of
0. Instead of duplicating it in each and every board DTS file, let's put it
in the DTSI.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The soc node in the A80 DTSI has a ranges property, but no matching unit
address, which results in a DTC warning. Add the unit address to remove
that warning.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Since most of the display IPs have a single endpoint, having a reg
property, a unit-address and #address-cells and #size-cells will emit a
warning.

Let's remove those.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Unlike what the binding for multiple pipeline documents, the A83t doesn't
have the cross links between the TCON and the mixers.

Let's add them.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Make sure that A20 Olimex Lime2 pin bank regulators are
properly represented.

While pin banks A, B and F are connected to 3.3V static
regulator, pin banks E and G tied with LDO3 and LDO4 regulators
with 2.8V reference.
Signed-off-by: NPriit Laes <priit.laes@paf.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Since only one alternative at a time is used, and some functions may not
be used at all, this cuts down the size of the board dtb files a bit.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

This adds pinctrl settings the EMAC using pins in the PH block.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

This adds pinctrl settings for the CAN controller using pins
PA16 and PA17.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

This adds pinctrl settings for various missing uart options.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Commit d0275214 ("ARM: dts: sun8i-a23-a33: Move NAND controller device
node to sort by address") moved the NAND controller node around, but
dropped the default muxing in the process.

Reintroduce it.

Fixes: d0275214 ("ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address")
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII
with PHY SMSC LAN8742
Signed-off-by: NChristophe Roullier <christophe.roullier@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.
Signed-off-by: NSugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

commit 137cd710
"ARM: dts: Enable Gemini flash access" contained a bug
by disabling the display controller, while the whole
idea with the patch was to enable flash access AND
the display controller, simultaneously. Fix it up.

Fixes: 137cd710 ("ARM: dts: Enable Gemini flash access")
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>