- 03 8月, 2012 8 次提交
-
-
由 Mohammed Shafi Shajakhan 提交于
AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli <felixb@qca.qualcomm.com> Reported-by: NTim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: NMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: NTim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Seth Forshee 提交于
brcmsmac cannot call freq_reg_info() during channel changes as it does not hold cfg80211_lock, and as a result it generates a lockdep warning. freq_reg_info() is being used to determine whether OFDM is allowed on the current channel, so we can avoid the errant call by using the new IEEE80211_CHAN_NO_OFDM for this purpose instead. Reported-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
The if_sdio_card structure was never being freed, and neither was the command structure used for association. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Woody Hung 提交于
This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by: NWoody Hung <Woody.Hung@mediatek.com> Cc: Kevin Chou <kevin.chou@mediatek.com> Signed-off-by: NChen, Chien-Chia <machen@suse.com> Reviewed-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
On an OLPC XO-1.5 we have seen the following situation: - the system starts going into suspend - no wake params are set, so the mmc layer removes the card - during remove, we send a command to the card - that command fails, causing if_sdio's reset method to try and remove the mmc card in attempt to reset it - the mmc layer is not happy about being asked to remove a card that it is already removing, and the kernel crashes While the MMC layer could possibly be taught to behave better here, it also seems sensible for libertas not to try and reset a card if we're in the process of removing it anyway. Signed-off-by: NDaniel Drake <dsd@laptop.org> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Add some comments by the way Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 8月, 2012 29 次提交
-
-
由 Paul Stewart 提交于
Restore the default state to the "beacon_found" flag when the channel flags are restored. Otherwise, we can end up with a channel that we can no longer transmit on even when we can see beacons on that channel. Signed-off-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Seth Forshee 提交于
Currently the only way for wireless drivers to tell whether or not OFDM is allowed on the current channel is to check the regulatory information. However, this requires hodling cfg80211_mutex, which is not visible to the drivers. Other regulatory restrictions are provided as flags in the channel definition, so let's do similarly with OFDM. This patch adds a new flag, IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not allowed. This flag is set on any channels for which regulatory indicates that OFDM is prohibited. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Tested-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eric Dumazet 提交于
Remove unused includes after IP cache removal Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
In bnx2x_mcast_enqueue_cmd() we'll leak the memory allocated to 'new_cmd' if we hit the deafault case of the 'switch (cmd)'. Add a 'kfree(new_cmd)' to that case to avoid the leak. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
After SA is setup, one timer is armed to detect soft/hard expiration, however the timer handler uses xtime to do the math. This makes hard expiration occurs first before soft expiration after setting new date with big interval. As a result new child SA is deleted before rekeying the new one. Signed-off-by: NFan Du <fdu@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Currently an skb requiring TSO may not fit within a minimum-size TX queue. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This issue is designated as CVE-2012-3412. Set the maximum number of TSO segments for our devices to 100. This should make no difference to behaviour unless the actual MSS is less than about 700. Increase the minimum TX queue size accordingly to allow for 2 worst-case skbs, so that there will definitely be space to add an skb after we wake a queue. To avoid invalidating existing configurations, change efx_ethtool_set_ringparam() to fix up values that are too small rather than returning -EINVAL. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
A peer (or local user) may cause TCP to use a nominal MSS of as little as 88 (actual MSS of 76 with timestamps). Given that we have a sufficiently prodigious local sender and the peer ACKs quickly enough, it is nevertheless possible to grow the window for such a connection to the point that we will try to send just under 64K at once. This results in a single skb that expands to 861 segments. In some drivers with TSO support, such an skb will require hundreds of DMA descriptors; a substantial fraction of a TX ring or even more than a full ring. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This particularly affects sfc, for which the issue is designated as CVE-2012-3412. Therefore: 1. Add the field net_device::gso_max_segs holding the device-specific limit. 2. In netif_skb_features(), if the number of segments is too high then mask out GSO features to force fall back to software GSO. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "The lion share of this pull request are fixes for clk-related breakage caused by other changes during this merge window. For some platforms the fix was as simple as selecting HAVE_CLK, for others like the Loongson 2 significant restructuring was required. The remainder are changes required to get the Lantiq code to work again." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Loongson 2: Sort out clock managment. MIPS: Loongson 1: more clk support and add select HAVE_CLK MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: Lantiq: Platform specific CLK fixup MIPS: Lantiq: Add device_tree_init function MIPS: Lantiq: Fix interface clock and PCI control register offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML fixes from Richard Weinberger: "This patch set contains mostly fixes and cleanups. The UML tty driver uses now tty_port and is no longer broken like hell :-)" * 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add arch/x86/um to MAINTAINERS um: pass siginfo to guest process um: fix ubd_file_size for read-only files um: pull interrupt_end() into userspace() um: split syscall_trace(), pass pt_regs to it um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs um: set BLK_CGROUP=y in defconfig um: remove count_lock um: fully use tty_port um: Remove dead code um: remove line_ioctl() TTY: um/line, use tty from tty_port TTY: um/line, add tty_port
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM audit/signal updates from Russell King: "ARM audit/signal handling updates from Al and Will. This improves on the work Viro did last merge window, and sorts out some of the issues found with that work." * 'audit' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS ARM: 7473/1: deal with handlerless restarts without leaving the kernel ARM: 7472/1: pull all work_pending logics into C function ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline"" ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
-
由 Richard Weinberger 提交于
Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Martin Pärtel 提交于
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE, SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct where previously they were si_addr = NULL and si_code = 128. Signed-off-by: NMartin Pärtel <martin.partel@gmail.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Martin Pärtel 提交于
Made ubd_file_size not request write access. Fixes use of read-only images. Signed-off-by: NMartin Pärtel <martin.partel@gmail.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> [richard@nod.at: Fixed some minor build issues] Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Johannes Berg 提交于
The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: stable@vger.kernel.org Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
git://github.com/schandinat/linux-2.6由 Linus Torvalds 提交于
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been found recently. Most of the commits are regression fixes in HD-audio and some other random drivers." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: fix clock source validity index ALSA: hda - Fix mute-LED GPIO initialization for IDT codecs ALSA: hda - Add descriptions for missing IDT 92HD83x models ALSA: hda - Fix polarity of mute LED on HP Mini 210 ALSA: es1688 - freeup resources on init failure ALSA: hda - Workaround for silent output on VAIO Z with ALC889 ALSA: hda - Fix WARNING from HDMI/DP parser ALSA: hda - Detach from converter at closing in patch_hdmi.c ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210 ALSA: mpu401: Fix missing initialization of irq field ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
-
由 Ralf Baechle 提交于
For unexplainable reasons the Loongson 2 clock API was implemented in a module so fixing this involved shifting large amounts of code around. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block driver changes from Jens Axboe: - Making the plugging support for drivers a bit more sane from Neil. This supersedes the plugging change from Shaohua as well. - The usual round of drbd updates. - Using a tail add instead of a head add in the request completion for ndb, making us find the most completed request more quickly. - A few floppy changes, getting rid of a duplicated flag and also running the floppy init async (since it takes forever in boot terms) from Andi. * 'for-3.6/drivers' of git://git.kernel.dk/linux-block: floppy: remove duplicated flag FD_RAW_NEED_DISK blk: pass from_schedule to non-request unplug functions. block: stack unplug blk: centralize non-request unplug handling. md: remove plug_cnt feature of plugging. block/nbd: micro-optimization in nbd request completion drbd: announce FLUSH/FUA capability to upper layers drbd: fix max_bio_size to be unsigned drbd: flush drbd work queue before invalidate/invalidate remote drbd: fix potential access after free drbd: call local-io-error handler early drbd: do not reset rs_pending_cnt too early drbd: reset congestion information before reporting it in /proc/drbd drbd: report congestion if we are waiting for some userland callback drbd: differentiate between normal and forced detach drbd: cleanup, remove two unused global flags floppy: Run floppy initialization asynchronous
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull core block IO bits from Jens Axboe: "The most complicated part if this is the request allocation rework by Tejun, which has been queued up for a long time and has been in for-next ditto as well. There are a few commits from yesterday and today, mostly trivial and obvious fixes. So I'm pretty confident that it is sound. It's also smaller than usual." * 'for-3.6/core' of git://git.kernel.dk/linux-block: block: remove dead func declaration block: add partition resize function to blkpg ioctl block: uninitialized ioc->nr_tasks triggers WARN_ON block: do not artificially constrain max_sectors for stacking drivers blkcg: implement per-blkg request allocation block: prepare for multiple request_lists block: add q->nr_rqs[] and move q->rq.elvpriv to q->nr_rqs_elvpriv blkcg: inline bio_blkcg() and friends block: allocate io_context upfront block: refactor get_request[_wait]() block: drop custom queue draining used by scsi_transport_{iscsi|fc} mempool: add @gfp_mask to mempool_create_node() blkcg: make root blkcg allocation use %GFP_KERNEL blkcg: __blkg_lookup_create() doesn't need radix preload
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from NeilBrown. * 'for-next' of git://neil.brown.name/md: DM RAID: Add support for MD RAID10 md/RAID1: Add missing case for attempting to repair known bad blocks. md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE. md/raid1: don't abort a resync on the first badblock. md: remove duplicated test on ->openers when calling do_md_stop() raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer md/raid1: prevent merging too large request md/raid1: read balance chooses idlest disk for SSD md/raid1: make sequential read detection per disk based MD RAID10: Export md_raid10_congested MD: Move macros from raid1*.h to raid1*.c MD RAID1: rename mirror_info structure MD RAID10: rename mirror_info structure MD RAID10: Fix compiler warning. raid5: add a per-stripe lock raid5: remove unnecessary bitmap write optimization raid5: lockless access raid5 overrided bi_phys_segments raid5: reduce chance release_stripe() taking device_lock
-
由 J. Bruce Fields 提交于
In commit 3b6e2723 ("locks: prevent side-effects of locks_release_private before file_lock is initialized") we removed the last user of lm_release_private without removing the field itself. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2012 3 次提交
-
-
由 Yoichi Yuasa 提交于
This fixes a redefinition of clk_*: arch/mips/loongson1/common/clock.c:23:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/loongson1/common/clock.c:41:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here make[3]: *** [arch/mips/loongson1/common/clock.o] Error 1 Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Reviewed-by: NJohn Crispin <blogic@openwrt.org> Acked-by: NKelvin Cheung <keguang.zhang@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4143/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/txx9/generic/setup.c:87:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/txx9/generic/setup.c:97:5: error: redefinition of 'clk_enable' include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here arch/mips/txx9/generic/setup.c:103:6: error: redefinition of 'clk_disable' include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here arch/mips/txx9/generic/setup.c:108:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here arch/mips/txx9/generic/setup.c:114:6: error: redefinition of 'clk_put' include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here make[3]: *** [arch/mips/txx9/generic/setup.o] Error 1 Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Reviewed-by: NJohn Crispin <blogic@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/4142/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/bcm63xx/clk.c:249:5: error: redefinition of 'clk_enable' include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here arch/mips/bcm63xx/clk.c:259:6: error: redefinition of 'clk_disable' include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here arch/mips/bcm63xx/clk.c:268:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here arch/mips/bcm63xx/clk.c:275:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/bcm63xx/clk.c:302:6: error: redefinition of 'clk_put' include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here make[2]: *** [arch/mips/bcm63xx/clk.o] Error 1 Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Reviewed-by: NJohn Crispin <blogic@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/4141/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-