- 25 11月, 2020 38 次提交
-
-
由 Tashfique Abdullah 提交于
[Why] The MPCC may change and request data when the pipes are switching from 2 to 1 or 1 to 2. During the switch there is a possibility of underflow and flicker/missing data. [How] During VBlank the MPCC won't request data. The trick is to delay and wait on VBlank, ONLY when pipes are either turning on or off, right before MPCC is reset for the pipes. Signed-off-by: NTashfique Abdullah <tabdullah@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jacky Liao 提交于
[Why] On some platforms, DMCU is no longer used. In these cases, some DMCU memory should be completely powered off to save power. [How] 1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in use 2. Added a debug option to allow this behaviour to be turned off 3. Set all memory low power debug options to off first, to not immediately cause problems Signed-off-by: NJacky Liao <ziyu.liao@amd.com> Reviewed-by: NEric Yang <eric.yang2@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Yongqiang Sun 提交于
[Why & How] Enable stutter for DCN3.01. Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chris Park 提交于
[Why] Incorrect panel register settings are applied for power sequence because the register macro is not defined in resource. [How] Implement same register space to future resource files. Signed-off-by: NChris Park <Chris.Park@amd.com> Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ashley Thomas 提交于
[Why] Some sink devices wish to have access to the minimum HBlank supported by the ASIC. [How] Make the ASIC minimum HBlank available in Source Device information address 0x340. Signed-off-by: NAshley Thomas <Ashley.Thomas2@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Charlene Liu 提交于
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] slower down the HW i2c speed when used by HW i2c. this request: each acquired_i2c_engine setup the i2c speed needed. and set the I2c engine for HDCP use at release_engine. this covers SW using HW I2c engine and HDCP using HW I2c engine. for dmcu using HW I2c engine, needs add similar logic in dmcufw. Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com> Reviewed-by: NChris Park <Chris.Park@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Same as gmc9, basically filter the fault, reroute or handle it. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Felix pointed out that we need this for Navi as well. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Looks like we can't enabled the IH1/IH2 feature for Vega20, make sure retry faults are handled on a separate ring anyway. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Seems like we won't get the hardware IH1/2 rings on Vega20 working. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Add a soft IH ring implementation similar to the hardware IH1/2. This can be used if the hardware delegation of interrupts to IH1/2 doesn't work for some reason. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Return early in case of a ratelimit and don't print leading zeros for the address. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
The address space is only 48bit, not 64bit. And the VMHUBs work with sign extended addresses. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Use generic DMA api instead of bus-specific API. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Use generic DMA api instead of bus-specific API. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jiansong Chen 提交于
Update GC golden setting for navy_flounder. Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
Update golden setting for sienna_cichlid. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of letting the code fall through to the next case, and a fallthrough pseudo-keyword as a replacement for a /* fall through */ comment, Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keyword macros, as replacement for /* fall through */ comments. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rodrigo Siqueira 提交于
The HDCP feature requires at least one connector attached to the device; however, some GPUs do not have a physical output, making the HDCP initialization irrelevant. This patch disables HDCP initialization when the graphic card does not have output. Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We only need to arbitrate VGA access on VGA compatible devices. Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bernard Zhao 提交于
Fix check_patch.pl warning: WARNING: Prefer kmalloc_array over kmalloc with multiply +bps = kmalloc(align_space * sizeof((*data)->bps), GFP_KERNEL); WARNING: Prefer kmalloc_array over kmalloc with multiply +bps_bo = kmalloc(align_space * sizeof((*data)->bps_bo), GFP_KERNEL); kmalloc_array has multiply overflow check, which will be safer. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NBernard Zhao <bernard@vivo.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bernard Zhao 提交于
Fix check_patch.pl warning: kmalloc_array uses number as first arg, sizeof is generally wrong. +fences = kmalloc_array(sizeof(void *), id_mgr->num_ids, GFP_KERNEL); Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NBernard Zhao <bernard@vivo.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Support software ring share memory with vcn firmware. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Add dec software ring vm functions to support. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Add vcn software ring decode ring test and decode ib test. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Add macro, structure and function prototype to support vcn dec software ring. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
refactor dec message functions to add dec software ring support. Signed-off-by: NJames Zhu <James.Zhu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
Default runtime logic not changed. Provide an alternative runtime method. (set 1 to use BACO; 2 to use BAMACO) When set reset_method to 4, it will use BACO or BAMACO for gpu reset, according to runpm value. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NKenneth Feng <kenneth.feng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
Some features are still disabled after runtime pm resume. This can take the hardware back. Unlike other projects, this doesn't need pptable retransfer. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NKenneth Feng <kenneth.feng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Sonny Jiang 提交于
The UVD firmware is copied to cpu addr in uvd_resume, so it should be used after that. This is to fix a bug introduced by patch drm/amdgpu: fix SI UVD firmware validate resume fail. Signed-off-by: NSonny Jiang <sonny.jiang@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jinzhou Su 提交于
Using KIQ to map GFX queues instead of MMIO for gfx async ring, add missing doorbell range setting. v2: fix typo Signed-off-by: NJinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Kenneth Feng 提交于
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset. Otherwise it will cause the fw wrong state after reset and no response for any messages. Signed-off-by: NKenneth Feng <kenneth.feng@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Kenneth Feng 提交于
fix the null pointer issue when runtime pm is triggered. Signed-off-by: NKenneth Feng <kenneth.feng@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
dpcs reg are missing for dcn302 link encoder regs list, so add them. Just like dcn3 Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Sonny Jiang 提交于
The SI UVD firmware validate key is stored at the end of firmware, which is changed during resume while playing video. So get the key at sw_init and store it for fw validate using. Signed-off-by: NSonny Jiang <sonny.jiang@amd.com> Reviewed-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 19 11月, 2020 2 次提交
-
-
由 Tao Zhou 提交于
Add device id for dimgrey_cavefish. Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tao Zhou 提交于
add device ID for navy_flounder v2: squash in updates Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-