- 03 6月, 2015 33 次提交
-
-
由 Markus Pargmann 提交于
This is a small copy paste fix for batadv_ing_buffer_avg. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
The kernel coding style says, that there should not be multiple assignments in one row. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
CodingStyle describes that either none or both branches of a conditional have to have brackets. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
It is just a bit easier to put the error handling at one place and let multiple error paths use the same calls. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 David S. Miller 提交于
Shradha Shah says: ==================== sfc: ndo_get_phys_port_id, vadaptor stats and PF unload when Vf's assigned to guest This is the third and last instalment of SRIOV for EF10 patches. This patch set includes implementation of ndo_get_phys_port_id and changes to the MAC statistics code in order to support vadaptor statistics. It also includes code to deal with PF unload when Vf's are still assigned to the guest. The first couple of patches create sysfs files for physical port and link control flags which are particularly useful when we have enabled a large number of VF's. These patches have been tested with and without CONFIG_SFC_SRIOV. The creation and content of the sysfs files has been tested. The statistics are tested using ethtool for monitoring. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
If any VF is assigned as the PF is unloaded, do not attempt to remove its vport or the vswitch. These will be removed if the driver binds to the PF again, as an entity reset occurs during probe. A 'force' flag is added to efx_ef10_pci_sriov_disable() to distinguish between disabling SR-IOV and driver unload. SR-IOV cannot be disabled if VFs are assigned to guests. If the PF driver is unloaded while VFs are assigned, the driver may try to bind to the VF again at a later point if the driver has been reloaded and the VF returns to the same domain as the PF. In this case, the PF will not have a VF data structure, so the VF can check this and drop out of probe early. In this case, efx->vf_count will be zero but VFs will be present. The user is advised to remove the VF and re-create it. The check at the beginning of efx_ef10_pci_sriov_disable() that efx->vf_count is non-zero is removed to allow SR-IOV to be disabled in this case. Also, if the PF driver is unloaded, it will disable SR-IOV to remove these unknown VFs. By not disabling bus-mastering if VFs are still assigned, the VF will continue to pass traffic after the PF has been removed. When using the max_vfs module parameter, if VFs are already present do not try to initialise any more. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
When the driver unloads, force the unbind and removal of any VFs in the host with the PF. The PF cannot remove vports and vswitches if they are still being used by a VF driver, and when unloading the sfc driver the removal order is not guaranteed, so the instruction from the PF to the VF to unbind enforces a suitable ordering so that vswitches and vports can be removed. As a result of this, manually unbinding the driver from a single PF will result in all of its VFs in the host also being removed. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
The ifenslave command to set up a bond runs in an atomic context, and it queries the stats on the devices that are being enslaved. A VF needs to make an MCDI call to update its stats, which is not allowed in atomic context. The releasing of the stats_lock is moved to the beginning of the VF stats update function so that in_interrupt() can be used; it must be taken again before returning from this function. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
The raw_mask array is not initialised, so it needs to be explicitly set to zero in the 'else' branch. If the EVB capability is not present, a port cannot have multiple functions so the per-port MAC stats are correct and should match the corresponding vadaptor stats, so this redundancy can be removed from the ethtool stats output. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
MC_CMD_MAC_STATS can be called on a function before a vadaptor has been created, as the kernel can call into this through ndo_get_stats/ndo_get_stats64. If MC_CMD_MAC_STATS is called before the DMA queues have been setup, so that a vadaptor has not been created yet, firmware will return ENOENT. This is expected, so suppress the MCDI error message in this case. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
The netdevice statistics (in /proc/net/dev) are per-function stats so they must use the vadaptor stats. Change the use of MAC stats to vadaptor stats, and remove any statistics that can only be measured per-port. All stats that are removed will be shown as zeroes when these statistics are displayed. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
Firmware does not support a periodic DMA of vadaptor-stats on VFs, so only update the stats buffer when stats are requested (when running "ethtool -S" or an ip/ifconfig command that reports stats). Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
All interfaces will display vadaptor statistics, so set all the relevant bits in the stats bitmask. Only functions with the LINKCTRL flag will see other stats, including (per-port) MAC stats. The vadaptor stats are from rx_unicast to tx_overflow. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
The port-id must be known so that the RMON level can be set for the collection of vadapter stats. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
The MAC stats are per-port and will only be displayed on the PF with control of the link (one per physical port). Vadapter stats will also be displayed for this PF, so distinguish the MAC stats by adding a prefix of "port_". Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shradha Shah 提交于
Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shradha Shah 提交于
On every adapter there will be one primary PF per adaptor and one link control PF per port. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shradha Shah 提交于
This change is a stylistic change and does not affect functionality. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shradha Shah 提交于
In the case where we have multiple functions (PFs and VFs), this sysfs entry is useful to identify the physical port corresponding to the function we are interested in. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Aleksey Makarov says: ==================== net: thunderx: fix problems reported by static check tools These are fixes for the problems that were reported by static check tools. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
GFP_KERNEL should be used in the thread context Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes a coccinelle warning: coccinelle warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/thunder/nicvf_queues.c:360:1-11: alloc >> with no test, possible model on line 367 vim +360 drivers/net/ethernet/cavium/thunder/nicvf_queues.c 354 err = nicvf_alloc_q_desc_mem(nic, &sq->dmem, q_len, SND_QUEUE_DESC_SIZE, 355 NICVF_SQ_BASE_ALIGN_BYTES); 356 if (err) 357 return err; 358 359 sq->desc = sq->dmem.base; > 360 sq->skbuff = kcalloc(q_len, sizeof(u64), GFP_ATOMIC); 361 sq->head = 0; 362 sq->tail = 0; 363 atomic_set(&sq->free_cnt, q_len - 1); 364 sq->thresh = SND_QUEUE_THRESH; 365 366 /* Preallocate memory for TSO segment's header */ > 367 sq->tso_hdrs = dma_alloc_coherent(&nic->pdev->dev, 368 q_len * TSO_HEADER_SIZE, 369 &sq->tso_hdrs_phys, GFP_KERNEL); 370 if (!sq->tso_hdrs) Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
No need to cast void* to u8*: pointer arithmetics works same way for both. Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes a copypaste bug that was discovered by a static analysis tool: The patch 4863dea3: "net: Adding support for Cavium ThunderX network controller" from May 26, 2015, leads to the following static checker warning: drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c:517 nicvf_set_rxfh() warn: we tested 'hkey' before and it was 'false' drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c 506 /* We do not allow change in unsupported parameters */ 507 if (hkey || ^^^^ We return here. 508 (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)) 509 return -EOPNOTSUPP; 510 511 rss->enable = true; 512 if (indir) { 513 for (idx = 0; idx < rss->rss_size; idx++) 514 rss->ind_tbl[idx] = indir[idx]; 515 } 516 517 if (hkey) { ^^^^ So this is dead code. 518 memcpy(rss->key, hkey, RSS_HASH_KEY_SIZE * sizeof(u64)); 519 nicvf_set_rss_key(nic); 520 } 521 522 nicvf_config_rss(nic); 523 return 0; 524 } regards, dan carpenter Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/nicvf_main.c:1141:26: sparse: symbol 'nicvf_get_stats64' was not declared. Should it be static? Also remove unused declarations Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
They were left from development stage Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:385:40: sparse: cast to restricted __le64 Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes sparse message: drivers/net/ethernet/cavium/thunder/nicvf_main.c:153:25: sparse: cast to restricted __le64 Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksey Makarov 提交于
This fixes sparse messages like this: drivers/net/ethernet/cavium/thunder/thunder_bgx.c:897:24: sparse: constant 0x300000000000 is so big it is long Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Richter 提交于
There are duplicate NODE_ID macro definitions. Move all of them to nic.h for usage in nic and bgx driver and introduce nic_get_node_id() helper function. This patch also fixes 64bit mask which should have been ULL by reworking the node calculation. Signed-off-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2015 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: Adds support for Chelsio T6 adapter This patch series adds the following: Adds NIC driver support for T6 adapter Adds vNIC driver support for T6 adapter This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Fixed compilation issue, when CHELSIO_T4_FCOE is set ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds vnic driver register related changes for T6 adapter Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds NIC driver related changes for T6 adapter. Register related changes, MC related changes, VF related changes, doorbell related changes, debugfs changes, etc Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Adds new macro is_t6 and adds the register address range for T6 adapter Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull Sparc fixes from David Miller: 1) Setup the core/threads/sockets bitmaps correctly so that 'lscpus' and friends operate properly. Frtom Chris Hyser. 2) The bit that normally means "Cached Virtually" on sun4v systems, actually changes meaning in M7 and later chips. Fix from Khalid Aziz. 3) One some PCI-E systems we need to probe different OF properties to fill in the PCI slot information properly, from Eric Snowberg. 4) Kill an extraneous memset after kzalloc(), from Christophe Jaillet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE sparc64: pci slots information is not populated in sysfs sparc: kernel: GRPCI2: Remove a useless memset sparc64: Setup sysfs to mark LDOM sockets, cores and threads correctly
-