- 20 9月, 2012 10 次提交
-
-
由 Amerigo Wang 提交于
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
Two years ago, Shan Wei tried to fix this: http://patchwork.ozlabs.org/patch/43905/ The problem is that RFC2460 requires an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment, if the defragmentation times out. " If insufficient fragments are received to complete reassembly of a packet within 60 seconds of the reception of the first-arriving fragment of that packet, reassembly of that packet must be abandoned and all the fragments that have been received for that packet must be discarded. If the first fragment (i.e., the one with a Fragment Offset of zero) has been received, an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment. " As Herbert suggested, we could actually use the standard IPv6 reassembly code which follows RFC2460. With this patch applied, I can see ICMP Time Exceeded sent from the receiver when the sender sent out 3/4 fragmented IPv6 UDP packet. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
As pointed by Michal, it is necessary to add a new namespace for nf_conntrack_reasm code, this prepares for the second patch. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
In netpoll tx path, we miss the chance of calling ->ndo_select_queue(), thus could cause problems when bonding is involved. This patch makes dev_pick_tx() extern (and rename it to netdev_pick_tx()) to let netpoll call it in netpoll_send_skb_on_dev(). Reported-by: NSylvain Munaut <s.munaut@whatever-company.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NCong Wang <amwang@redhat.com> Tested-by: NSylvain Munaut <s.munaut@whatever-company.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The internal functions for add/deleting addresses don't change their argument. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add GSO support to GRE tunnels. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Instead of forcing device drivers to provide empty ethtool_ops or tweak net/core/ethtool.c again, we could provide a generic ethtool_ops. This occurred to me when I wanted to add GSO support to GRE tunnels. ethtool -k support should be generic for all drivers. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Maciej Żenczykowski <maze@google.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
When moving a nic from net namespace A to net namespace B, in dev_change_net_namesapce,we call __dev_get_by_name to decide if the netns B has the device has the same name. if the netns B already has the same named device,we call dev_get_valid_name to try to get a valid name for this nic in the netns B,but net_device->nd_net still point to netns A now. this patch fix it. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
If dst cache dst_a copies from dst_b, and dst_b copies from dst_c, check if dst_a is expired or not, we should not end with dst_a->dst.from, dst_b, we should check dst_c. CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
dev_queue_xmit_nit() should be called right before ndo_start_xmit() calls or we might give wrong packet contents to taps users : Packet checksum can be changed, or packet can be linearized or segmented, and segments partially sent for the later case. Also a memory allocation can fail and packet never really hit the driver entry point. Reported-by: NJamie Gloudon <jamie.gloudon@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2012 3 次提交
-
-
由 Peter Senna Tschudin 提交于
Found by http://coccinelle.lip6.fr/Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Senna Tschudin 提交于
Found by http://coccinelle.lip6.fr/Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Senna Tschudin 提交于
Found by http://coccinelle.lip6.fr/Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2012 8 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
These arrays are accessed by iteration in llc_exec_station_trans_actions(). There must not be any zero-filled gaps in them, so the explicit indices are pointless. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
We only ever put one skb on the send queue, and then immediately send it. Remove the queue and call dev_queue_xmit() directly. This leaves struct llc_station empty, so remove that as well. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
We only ever put one skb on the event queue, and then immediately process it. Remove the queue and fold together the related functions, removing several blatantly false comments. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
The initial state is UP and there is no way to enter the other states as the required event type is never generated. Delete all states, event types, and other dead code. The only thing left is handling of the XID and TEST commands. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 9月, 2012 11 次提交
-
-
由 Nishank Trivedi 提交于
If vlan option is being specified in the pktgen and packet size being requested is less than 46 bytes, despite being illogical request, pktgen should not crash the kernel. BUG: unable to handle kernel paging request at ffff88021fb82000 Process kpktgend_0 (pid: 1184, threadinfo ffff880215f1a000, task ffff880218544530) Call Trace: [<ffffffffa0637cd2>] ? pktgen_finalize_skb+0x222/0x300 [pktgen] [<ffffffff814f0084>] ? build_skb+0x34/0x1c0 [<ffffffffa0639b11>] pktgen_thread_worker+0x5d1/0x1790 [pktgen] [<ffffffffa03ffb10>] ? igb_xmit_frame_ring+0xa30/0xa30 [igb] [<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40 [<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40 [<ffffffffa0639540>] ? spin+0x240/0x240 [pktgen] [<ffffffff8107b4e3>] kthread+0x93/0xa0 [<ffffffff81615de4>] kernel_thread_helper+0x4/0x10 [<ffffffff8107b450>] ? flush_kthread_worker+0x80/0x80 [<ffffffff81615de0>] ? gs_change+0x13/0x13 The root cause of why pktgen is not able to handle this case is due to comparison of signed (datalen) and unsigned data (sizeof), which eventually passes a huge number to skb_put(). Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We kmemdup() templates, so they can be const. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Compare bits up to the source address's prefix length only to allows DNS load balancing to continue to be used as a tie breaker. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Added labels for site-local addresses (fec0::/10) and 6bone testing addresses (3ffe::/16) in order to depreference them. Note that the RFC introduced new rows for Teredo, ULA and 6to4 addresses in the default policy table. Some of them have different labels from ours. For backward compatibility, we do not change the "default" labels. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srivatsa S. Bhat 提交于
Replace the current (inefficient) for-loop with memcpy, to copy priomap. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srivatsa S. Bhat 提交于
The update_netdev_tables() function appears to be unnecessary, since the write_update_netdev_table() function will adjust the priomaps as and when required anyway. So drop the usage of update_netdev_tables() entirely. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ward 提交于
gred_dequeue() and gred_drop() do not seem to get called when the queue is empty, meaning that we never start idling while in WRED mode. And since qidlestart is not stored by gred_store_wred_set(), we would never stop idling while in WRED mode if we ever started. This messes up the average queue size calculation that influences packet marking/dropping behavior. Now, we start WRED mode idling as we are removing the last packet from the queue. Also we now actually stop WRED mode idling when we are enqueuing a packet. Cc: Bruce Osler <brosler@cisco.com> Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ward 提交于
q->vars.qavg is a Wlog scaled value, but q->backlog is not. In order to pass q->vars.qavg as the backlog value, we need to un-scale it. Additionally, the qave value returned via netlink should not be Wlog scaled, so we need to un-scale the result of red_calc_qavg(). This caused artificially high values for "Average Queue" to be shown by 'tc -s -d qdisc', but did not affect the actual operation of GRED. Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ward 提交于
Each pair of DPs only needs to be compared once when searching for a non-unique prio value. Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ward 提交于
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 9月, 2012 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
(c7232c99 netfilter: add protocol independent NAT core) added incorrect locking for the module auto-load case in ctnetlink_parse_nat. That function is always called from ctnetlink_create_conntrack which requires no locking. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Joe Perches 提交于
auto75914331@hushmail.com reports that iptables does not correctly output the KERN_<level>. $IPTABLES -A RULE_0_in -j LOG --log-level notice --log-prefix "DENY in: " result with linux 3.6-rc5 Sep 12 06:37:29 xxxxx kernel: <5>DENY in: IN=eth0 OUT= MAC=....... result with linux 3.5.3 and older: Sep 9 10:43:01 xxxxx kernel: DENY in: IN=eth0 OUT= MAC...... commit 04d2c8c8 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern") updated the syslog header style but did not update netfilter uses. Do so. Use KERN_SOH and string concatenation instead of "%c" KERN_SOH_ASCII as suggested by Eric Dumazet. Signed-off-by: NJoe Perches <joe@perches.com> cc: auto75914331@hushmail.com Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric Dumazet 提交于
Its possible to setup a bad cbq configuration leading to an infinite loop in cbq_classify() DEV_OUT=eth0 ICMP="match ip protocol 1 0xff" U32="protocol ip u32" DST="match ip dst" tc qdisc add dev $DEV_OUT root handle 1: cbq avpkt 1000 \ bandwidth 100mbit tc class add dev $DEV_OUT parent 1: classid 1:1 cbq \ rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV_OUT parent 1: prio 3 $U32 \ $ICMP $DST 192.168.3.234 flowid 1: Reported-by: NDenys Fedoryschenko <denys@visp.net.lb> Tested-by: NDenys Fedoryschenko <denys@visp.net.lb> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 9月, 2012 5 次提交
-
-
由 Randy Dunlap 提交于
Fix net/core/sock.c build error when CONFIG_INET is not enabled: net/built-in.o: In function `sock_edemux': (.text+0xd396): undefined reference to `inet_twsk_put' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
After this commit: commit 97cac082 Author: David S. Miller <davem@davemloft.net> Date: Mon Jul 2 22:43:47 2012 -0700 ipv6: Store route neighbour in rt6_info struct. we no longer use RCU to protect route neighbour. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add a new ALU opcode, to compute a modulus. Commit ffe06c17 used an ancillary to implement XOR_X, but here we reserve one of the available ALU opcode to implement both MOD_X and MOD_K Signed-off-by: NEric Dumazet <edumazet@google.com> Suggested-by: NGeorge Bakos <gbakos@alpinista.org> Cc: Jay Schulist <jschlst@samba.org> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
When a policy expiration is triggered from user space the request travels through km_policy_expired and ultimately into xfrm_exp_policy_notify which calls build_polexpire. build_polexpire uses the netlink port passed to km_policy_expired as the source port for the netlink message it builds. When a state expiration is triggered from user space the request travles through km_state_expired and ultimately into xfrm_exp_state_notify which calls build_expire. build_expire uses the netlink port passed to km_state_expired as the source port for the netlink message it builds. Pass nlh->nlmsg_pid from the user generated netlink message that requested the expiration to km_policy_expired and km_state_expired instead of current->pid which is not a netlink port number. Cc: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-