* pm-cpuidle:
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state

The idle cpus which stay in snooze for a long period can degrade the
perfomance of the sibling cpus. If the cpu stays in snooze for more
than target residency of the next available idle state, then exit from
snooze. This gives a chance to the cpuidle governor to re-evaluate the
last idle state of the cpu to promote it to deeper idle states.
Signed-off-by: NShilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-sleep:
  x86: Load __USER_DS into DS/ES after resume

Srinivas Pandruvada reported a problem with system resume from
suspend-to-RAM on 32-bit x86 systems where the DS register of
the CPU is set to __KERNEL_DS instead of __USER_DS on return
to user space which cases a General Protection Fault to occur.

The issue is that DS is set to __KERNEL_DS by the ACPI resume code
path while the SYSEXIT path never reloads DS/ES.  It assumes they
are still __USER_DS set at the SYSENTER time (Brian Gerst), so if
the return to user space happens to be through SYSEXIT, it will lead
to the reported GPF.

Fix the problem by setting the DS and ES registers to __USER_DS
as expected by the SYSEXIT path.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=61781
Link: http://marc.info/?l=linux-pm&m=143406648920385&w=2Acked-by: NPavel Machek <pavel@ucw.cz>
Tested-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-opp:
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings

On few platforms, for power efficiency, we want the device to be
configured for a specific OPP while we put the device in suspend state.

Add an optional property in operating-points-v2 bindings for that.
Suggested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NNishanth Menon <nm@ti.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On some platforms (Like Qualcomm's SoCs), it is not decided until
runtime on what OPPs to use. The OPP tables can be fixed at compile
time, but which table to use is found out only after reading some efuses
(sort of an prom) and knowing characteristics of the SoC.

To support such platform we need to pass multiple OPP tables per device
and hardware should be able to choose one and only one table out of
those.

Update operating-points-v2 bindings to support that.
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Current OPP (Operating performance point) device tree bindings have been
insufficient due to the inflexible nature of the original bindings. Over
time, we have realized that Operating Performance Point definitions and
usage is varied depending on the SoC and a "single size (just frequency,
voltage) fits all" model which the original bindings attempted and
failed.

The proposed next generation of the bindings addresses by providing a
expandable binding for OPPs and introduces the following common
shortcomings seen with the original bindings:

- Getting clock/voltage/current rails sharing information between CPUs.
  Shared by all cores vs independent clock per core vs shared clock per
  cluster.

- Support for specifying current levels along with voltages.

- Support for multiple regulators.

- Support for turbo modes.

- Other per OPP settings: transition latencies, disabled status, etc.?

- Expandability of OPPs in future.

This patch introduces new bindings "operating-points-v2" to get these problems
solved. Refer to the bindings for more details.

We now have multiple versions of OPP binding and only one of them should
be used per device.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

* pnp:
  PNP / ACPI: use unsigned int in pnpacpi_encode_resources()
  PNP / ACPI: use u8 instead of int in acpi_resource_extended_irq context

* pm-tools:
  cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode

* pm-clk:
  PM / clk: Print acquired clock name in addition to con_id
  PM / clk: Fix clock error check in __pm_clk_add()
  drivers: sh: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
  arm: davinci: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
  arm: omap1: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
  arm: keystone: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
  PM / clock_ops: Provide default runtime ops to users

* pm-domains:
  PM / Domains: Skip timings during syscore suspend/resume

* powercap:
  powercap / RAPL: Support Knights Landing
  powercap / RAPL: Floor frequency setting in Atom SoC

* pm-wakeirq:
  PM / wakeirq: Fix typo in prototype for dev_pm_set_dedicated_wake_irq
  PM / Wakeirq: Add automated device wake IRQ handling

* pm-sleep:
  PM / sleep: trace_device_pm_callback coverage in dpm_prepare/complete
  PM / wakeup: add a dummy wakeup_source to record statistics
  PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND
  PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection
  PM / tick: Add tracepoints for suspend-to-idle diagnostics
  PM / sleep: Fix symbol name in a comment in kernel/power/main.c
  leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger
  ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  bus: omap_l3_noc: add missed callbacks for suspend-to-disk
  PM / sleep: Add macro to define common noirq system PM callbacks
  PM / sleep: Refine diagnostic messages in enter_state()
  PM / wakeup: validate wakeup source before activating it.

* pm-runtime:
  PM / Runtime: Update last_busy in rpm_resume
  PM / runtime: add note about re-calling in during device probe()

* pm-cpufreq: (37 commits)
  cpufreq: dt: allow driver to boot automatically
  intel_pstate: Fix overflow in busy_scaled due to long delay
  cpufreq: qoriq: optimize the CPU frequency switching time
  cpufreq: gx-suspmod: Fix two typos in two comments
  cpufreq: nforce2: Fix typo in comment to function nforce2_init()
  cpufreq: governor: Serialize governor callbacks
  cpufreq: governor: split cpufreq_governor_dbs()
  cpufreq: governor: register notifier from cs_init()
  cpufreq: Remove cpufreq_update_policy()
  cpufreq: Restart governor as soon as possible
  cpufreq: Call cpufreq_policy_put_kobj() from cpufreq_policy_free()
  cpufreq: Initialize policy->kobj while allocating policy
  cpufreq: Stop migrating sysfs files on hotplug
  cpufreq: Don't allow updating inactive policies from sysfs
  intel_pstate: Force setting target pstate when required
  intel_pstate: change some inconsistent debug information
  cpufreq: Track cpu managing sysfs kobjects separately
  cpufreq: Fix for typos in two comments
  cpufreq: Mark policy->governor = NULL for inactive policies
  cpufreq: Manage governor usage history with 'policy->last_governor'
  ...

* pm-cpuidle:
  cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.c
  cpuidle: Select a different state on tick_broadcast_enter() failures
  sched / idle: Call default_idle_call() from cpuidle_enter_state()
  sched / idle: Call idle_set_state() from cpuidle_enter_state()
  cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()
  sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
  cpuidle: Check the sign of index in cpuidle_reflect()
  sched / idle: Move the default idle call code to a separate function

* acpi-cca:
  ufs: fix TRUE and FALSE re-define build error
  megaraid_sas: fix TRUE and FALSE re-define build error
  amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
  crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
  device property: Introduces device_dma_is_coherent()
  arm64 : Introduce support for ACPI _CCA object
  ACPI / scan: Parse _CCA and setup device coherency

* acpi-video: (38 commits)
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  dell-laptop: Port to new backlight interface selection API
  compal-laptop: Port to new backlight interface selection API
  asus-wmi: Port to new backlight interface selection API
  asus-laptop: Port to new backlight interface selection API
  apple-gmux: Port to new backlight interface selection API
  acer-wmi: Port to new backlight interface selection API
  ACPI / video: Fix acpi_video _register vs _unregister_backlight race
  ...

* acpi-battery:
  ACPI / battery: mark DMI table as __initconst
  ACPI / battery: minor tweaks to acpi_battery_units()
  ACPI / battery: constify the offset tables
  ACPI / battery: ensure acpi_battery_init() has finish
  ACPI / battery: drop useless return statements
  ACPI / battery: abort initialization earlier if acpi_disabled

* acpi-processor:
  ACPI / processor: constify DMI system id table
  ACPI / processor: Introduce invalid_phys_cpuid()
  ACPI / processor: return specific error instead of -1
  ACPI / processor: remove phys_id in acpi_processor_get_info()
  ACPI / processor: remove cpu_index in acpi_processor_get_info()
  Xen / ACPI / processor: Remove unneeded NULL check
  Xen / ACPI / processor: use invalid_logical_cpuid()
  ACPI / processor: Introduce invalid_logical_cpuid()

* acpi-ac:
  ACPI / AC: constify DMI system id table

* acpi-soc:
  ACPI / LPSS: constify device descriptors

* acpi-assorted:
  ACPI / HED: constify ACPI device ids

* acpi-ec:
  ACPI / EC: Fix a code coverity issue when QR_EC transactions are failed.
  ACPI / EC: Fix EC_FLAGS_QUERY_HANDSHAKE platforms using new event clearing timing.
  ACPI / EC: Add event clearing variation support.
  ACPI / EC: Convert event handling work queue into loop style.
  ACPI / EC: Cleanup transaction state transition.
  ACPI / EC: Remove non-root-caused busy polling quirks.
  ACPI / EC: Add module params for polling modes.
  ACPI / EC: Fix and clean up register access guarding logics.
  ACPI / EC: Remove irqs_disabled() check.
  ACPI / EC: Remove storming threashold enlarging quirk.
  ACPI / EC: Update acpi_ec_is_gpe_raised() with new GPE status flag.

* acpi-pm:
  ACPI / PM: Add missing pm_generic_complete() invocation
  ACPI / PM: Turn power resources on and off in the right order during resume
  ACPI / PM: Rework device power management to follow ACPI 6
  ACPI / PM: Drop stale comment from acpi_power_transition()

* acpi-apei:
  GHES: Make NMI handler have a single reader
  GHES: Elliminate double-loop in the NMI handler
  GHES: Panic right after detection
  GHES: Carve out the panic functionality
  GHES: Carve out error queueing in a separate function

* acpi-osl:
  ACPI / osl: use same type for acpi_predefined_names values as in definition

* acpi-pci:
  ACPI / PCI: remove stale list_head in struct acpi_prt_entry

* acpi-init:
  ACPI / init: Switch over platform to the ACPI mode later

* acpi-pnp:
  ACPI / PNP: Avoid conflicting resource reservations

* acpi-scan:
  ACPI / scan: constify ACPI device ids
  ACPI / property: Define a symbol for PRP0001
  ACPI / property: Refine consistency check for PRP0001

* acpi-proc:
  ACPI / proc: make ACPI_PROCFS_POWER X86 only

* acpi-doc:
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI: fix kernel-parameters ordering in Documentation

* acpica: (22 commits)
  ACPICA: Fix for ill-formed GUID strings for NFIT tables.
  ACPICA: acpihelp: Update for new NFIT table GUIDs.
  ACPICA: Update version to 20150515.
  ACPICA: ACPI 6.0: Add support for NFIT table.
  ACPICA: acpi_help: Add option to display all known/supported ACPI tables.
  ACPICA: iASL/disassembler - fix possible fault for -e option.
  ACPICA: ACPI 6.0: Add changes for DRTM table.
  ACPICA: ACPI 6.0: Add support for IORT table.
  ACPICA: ACPI 6.0: Add ACPI_SUB_PTR().
  ACPICA: ACPI 6.0: Add changes for MADT table.
  ACPICA: Hardware: Fix a resource leak issue in acpi_hw_build_pci_list().
  ACPICA: Dispatcher: Fix a resource leak issue in acpi_ds_auto_serialize_method().
  ACPICA: ACPI 6.0: Add changes for LPIT table.
  ACPICA: ACPI 6.0: Add changes for FADT table.
  ACPICA: ACPI 6.0: Add support for WPBT table.
  ACPICA: iASL: Enhance detection of non-ascii or corrupted input files.
  ACPICA: Parser: Move a couple externals to the proper header.
  ACPICA: ACPI 6.0: Add support for XENV table.
  ACPICA: ACPI 6.0: Add support for new predefined names.
  ACPICA: ACPI 6.0: Add support for STAO table.
  ...

ACPI device ID arrays normally don't need to be written to as they're
only ever read. The common usage -- embedding pointers to acpi_device_id
arrays in other data structures -- reference them as 'const', e.g. as in
struct acpi_driver / acpi_scan_handler / device_driver. The matchers are
taking const pointers, too. So it's only natural, to propose using const
arrays. Change the documentation accordingly.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Document how the ACPI device enumeration code uses the special
PRP0001 device ID.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>

acpi_video_unregister_backlight() is now only used by video_detect.c
which is part of the same acpi_video module as video.c, make
acpi_video_unregister_backlight() private to this module.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the old backlight interface selection API now that all drivers
have been ported to the new API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NAzael Avalos <coproscefalo@gmail.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NMattia Dongili <malattia@linux.it>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJonathan Woithe <jwoithe@just42.net>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Port the backlight selection logic to the new backlight interface
selection API.

This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>