Pass the region to be snapshotted to the function performing the
snapshot. This allows one function to operate on numerous regions.

v4:
Add missing kerneldoc for ICE
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a simple devlink flash timeout message to exercise
the message mechanism.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A later patch will refuse to set the action of certain traps in mlxsw
and also to change the policer binding of certain groups. Pass extack so
that failure could be communicated clearly to user space.
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add UDP tunnel port handlers to our fake driver so we can test
the core infra.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, devlink_port_attrs_set accepts a long list of parameters,
that most of them are devlink port's attributes.

Use the devlink_port_attrs struct to replace the relevant parameters.
Signed-off-by: NDanielle Ratson <danieller@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Register two control traps with devlink. The existing selftest at
tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh iterates
over all registered traps and checks that the action of non-drop traps
cannot be changed. Up until now only exception traps were tested, now
control traps will be tested as well.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The layer 3 exceptions are still subject to the same trap policer, so
nothing changes, but user space can choose to assign a different one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the policer drop counter is retrieved when the jiffies value is
a multiple of 64, the counter will not be incremented.

This randomly breaks a selftest [1] the reads the counter twice and
checks that it was incremented:

```
TEST: Trap policer                                                  [FAIL]
	Policer drop counter was not incremented
```

Fix by always incrementing the counter by 1.

[1] tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh

Fixes: ad188458 ("netdevsim: Add devlink-trap policer support")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case memory resources for dummy_data were allocated, release them
before return.

Addresses-Coverity-ID: 1491997 ("Resource leak")
Fixes: 7ef19d3b ("devlink: report error once U32_MAX snapshot ids have been used")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a dummy callback to set trap group parameters. Return an error when
the 'fail_trap_group_set' debugfs file is set in order to exercise error
paths and verify that error is propagated to user space when should.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packet trap groups are used to aggregate logically related packet traps.
Currently, these groups allow user space to batch operations such as
setting the trap action of all member traps.

In order to prevent the CPU from being overwhelmed by too many trapped
packets, it is desirable to bind a packet trap policer to these groups.
For example, to limit all the packets that encountered an exception
during routing to 10Kpps.

Allow device drivers to bind default packet trap policers to packet trap
groups when the latter are registered with devlink.

The next patch will enable user space to change this default binding.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Register three dummy packet trap policers with devlink and implement
callbacks to change their parameters and read their counters.

This will be used later on in the series to test the devlink-trap
policer infrastructure.

v2:
* Remove check about burst size being a power of 2 and instead add a
  debugfs knob to fail the operation
* Provide max/min rate/burst size when registering policers and remove
  the validity checks from nsim_dev_devlink_trap_policer_set()
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the .snapshot region operation for the dummy data region. This
enables a region snapshot to be taken upon request via the new
DEVLINK_CMD_REGION_SNAPSHOT command.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each snapshot created for a devlink region must have an id. These ids
are supposed to be unique per "event" that caused the snapshot to be
created. Drivers call devlink_region_snapshot_id_get to obtain a new id
to use for a new event trigger. The id values are tracked per devlink,
so that the same id number can be used if a triggering event creates
multiple snapshots on different regions.

There is no mechanism for snapshot ids to ever be reused. Introduce an
xarray to store the count of how many snapshots are using a given id,
replacing the snapshot_id field previously used for picking the next id.

The devlink_region_snapshot_id_get() function will use xa_alloc to
insert an initial value of 1 value at an available slot between 0 and
U32_MAX.

The new __devlink_snapshot_id_increment() and
__devlink_snapshot_id_decrement() functions will be used to track how
many snapshots currently use an id.

Drivers must now call devlink_snapshot_id_put() in order to release
their reference of the snapshot id after adding region snapshots.

By tracking the total number of snapshots using a given id, it is
possible for the decrement() function to erase the id from the xarray
when it is not in use.

With this method, a snapshot id can become reused again once all
snapshots that referred to it have been deleted via
DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots.

This work also paves the way to introduce a mechanism for userspace to
request a snapshot.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The devlink_snapshot_id_get() function returns a snapshot id. The
snapshot id is a u32, so there is no way to indicate an error code.

A future change is going to possibly add additional cases where this
function could fail. Refactor the function to return the snapshot id in
an argument, so that it can return zero or an error value.

This ensures that snapshot ids cannot be confused with error values, and
aids in the future refactor of snapshot id allocation management.

Because there is no current way to release previously used snapshot ids,
add a simple check ensuring that an error is reported in case the
snapshot_id would over flow.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It does not makes sense that two snapshots for a given region would use
different destructors. Simplify snapshot creation by adding
a .destructor op for regions.

This operation will replace the data_destructor for the snapshot
creation, and makes snapshot creation easier.
Noticed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modify the devlink region code in preparation for adding new operations
on regions.

Create a devlink_region_ops structure, and move the name pointer from
within the devlink_region structure into the ops structure (similar to
the devlink_health_reporter_ops).

This prepares the regions to enable support of additional operations in
the future such as requesting snapshots, or accessing the region
directly without a snapshot.

In order to re-use the constant strings in the mlx4 driver their
declaration must be changed to 'const char * const' to ensure the
compiler realizes that both the data and the pointer cannot change.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packet trap groups are now explicitly registered by drivers and not
implicitly registered when the packet traps are registered. Therefore,
there is no need to encode entire group structure the trap is associated
with inside the trap structure.

Instead, only pass the group identifier. Refer to it as initial group
identifier, as future patches will allow user space to move traps
between groups.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the previously added API to explicitly register / unregister
supported packet trap groups. This is in preparation for future patches
that will enable drivers to pass additional group attributes, such as
associated policer identifier.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new trap ACL which reports flow action cookie in a metadata. Allow
used to setup the cookie using debugfs file.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add cookie argument to devlink_trap_report() allowing driver to pass in
the user cookie. Pass on the cookie down to drop monitor code.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 6556ff32 ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs")
CC: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Debugfs APIs return valid pointer or error pointer. it doesn't return NULL.
So, using IS_ERR is enough, not using IS_ERR_OR_NULL.
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Reported-by: Nkbuild test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When netdevsim dev is being created, a debugfs directory is created.
The variable "dev_ddir_name" is 16bytes device name pointer and device
name is "netdevsim<dev id>".
The maximum dev id length is 10.
So, 16bytes for device name isn't enough.

Test commands:
    modprobe netdevsim
    echo "1000000000 0" > /sys/bus/netdevsim/new_device

Splat looks like:
[  249.622710][  T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880
[  249.623658][  T900] Write of size 1 at addr ffff88804c527988 by task bash/900
[  249.624521][  T900]
[  249.624830][  T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322
[  249.625691][  T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  249.626712][  T900] Call Trace:
[  249.627103][  T900]  dump_stack+0x96/0xdb
[  249.627639][  T900]  ? number+0x824/0x880
[  249.628173][  T900]  print_address_description.constprop.5+0x1be/0x360
[  249.629022][  T900]  ? number+0x824/0x880
[  249.629569][  T900]  ? number+0x824/0x880
[  249.630105][  T900]  __kasan_report+0x12a/0x170
[  249.630717][  T900]  ? number+0x824/0x880
[  249.631201][  T900]  kasan_report+0xe/0x20
[  249.631723][  T900]  number+0x824/0x880
[  249.632235][  T900]  ? put_dec+0xa0/0xa0
[  249.632716][  T900]  ? rcu_read_lock_sched_held+0x90/0xc0
[  249.633392][  T900]  vsnprintf+0x63c/0x10b0
[  249.633983][  T900]  ? pointer+0x5b0/0x5b0
[  249.634543][  T900]  ? mark_lock+0x11d/0xc40
[  249.635200][  T900]  sprintf+0x9b/0xd0
[  249.635750][  T900]  ? scnprintf+0xe0/0xe0
[  249.636370][  T900]  nsim_dev_probe+0x63c/0xbf0 [netdevsim]
[ ... ]
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Fixes: ab1d0cc0 ("netdevsim: change debugfs tree topology")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region.
So, during this function, these data shouldn't be removed.
But there is no protecting stuff in this function.

There are two similar cases.
1. reload case
reload could be called during nsim_dev_take_snapshot_write().
When reload is being executed, nsim_dev_reload_down() is called and it
calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls
devlink_region_destroy() to destroy nsim_dev->dummy_region.
So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region()
would be removed.
At this point, snapshot_write() would access freed pointer.
In order to fix this case, take_snapshot file will be removed before
devlink_region_destroy().
The take_snapshot file will be re-created by ->reload_up().

2. del_device_store case
del_device_store() also could call nsim_dev_reload_destroy()
during nsim_dev_take_snapshot_write(). If so, panic would occur.
This problem is actually the same problem with the first case.
So, this problem will be fixed by the first case's solution.

Test commands:
    modprobe netdevsim
    while :
    do
        echo 1 > /sys/bus/netdevsim/new_device &
        echo 1 > /sys/bus/netdevsim/del_device &
	devlink dev reload netdevsim/netdevsim1 &
	echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot &
    done

Splat looks like:
[   45.564513][  T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI
[   45.566131][  T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7]
[   45.566135][  T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322
[   45.569020][  T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   45.569026][  T975] RIP: 0010:__mutex_lock+0x10a/0x14b0
[   45.570518][  T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f
[   45.570522][  T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206
[   45.572305][  T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   45.572308][  T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0
[   45.576843][  T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000
[   45.576847][  T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000
[   45.578471][  T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168
[   45.578475][  T975] FS:  00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000
[   45.581492][  T975] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   45.582942][  T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0
[   45.584543][  T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   45.586633][  T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   45.589889][  T975] Call Trace:
[   45.591445][  T975]  ? devlink_region_snapshot_create+0x55/0x4a0
[   45.601250][  T975]  ? mutex_lock_io_nested+0x1380/0x1380
[   45.602817][  T975]  ? mutex_lock_io_nested+0x1380/0x1380
[   45.603875][  T975]  ? mark_held_locks+0xa5/0xe0
[   45.604769][  T975]  ? _raw_spin_unlock_irqrestore+0x2d/0x50
[   45.606147][  T975]  ? __mutex_unlock_slowpath+0xd0/0x670
[   45.607723][  T975]  ? crng_backtrack_protect+0x80/0x80
[   45.613530][  T975]  ? wait_for_completion+0x390/0x390
[   45.615152][  T975]  ? devlink_region_snapshot_create+0x55/0x4a0
[   45.616834][  T975]  devlink_region_snapshot_create+0x55/0x4a0
[ ... ]

Fixes: 4418f862 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The function to obtain a unique snapshot id was mistakenly typo'd as
devlink_region_shapshot_id_get. Fix this typo by renaming the function
and all of its users.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename the trap-specific netdevimsim.rst file, and expand it to include
documentation of all the devlink features currently implemented by the
netdevsim driver code.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race between driver code that does setup/cleanup of device
and devlink reload operation that in some drivers works with the same
code. Use after free could we easily obtained by running:

while true; do
        echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind
        devlink dev reload pci/0000:00:10.0 &
        echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind
done

Fix this by enabling reload only after setup of device is complete and
disabling it at the beginning of the cleanup process.
Reported-by: NIdo Schimmel <idosch@mellanox.com>
Fixes: 2d8dc5bb ("devlink: Add support for reload")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race between driver code that does setup/cleanup of device
and devlink reload operation that in some drivers works with the same
code. Use after free could we easily obtained by running:

while true; do
        echo 10 > /sys/bus/netdevsim/new_device
        devlink dev reload netdevsim/netdevsim10 &
        echo 10 > /sys/bus/netdevsim/del_device
done

Fix this by enabling reload only after setup of device is complete and
disabling it at the beginning of the cleanup process.
Reported-by: NIdo Schimmel <idosch@mellanox.com>
Fixes: 2d8dc5bb ("devlink: Add support for reload")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looks like the port adding loop makes a re-appearance on net-next
after net was merged back into it (even though it doesn't feature
in the merge diff).

The ports are already added in nsim_dev_create() so when we try
to add them again get EEXIST, and see:

netdevsim: probe of netdevsim0 failed with error -17

in the logs. When we remove the loop again the nsim_dev_probe()
and nsim_dev_remove() become a wrapper of nsim_dev_create() and
nsim_dev_destroy(). Remove this layer of indirection.

Fixes: d31e9558 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit da58f90f ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.

While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].

Fix this by making sure that the ports list is always modified under the
lock.

[1]
[   59.205543] ==================================================================
[   59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[   59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[   59.212584]
[   59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[   59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[   59.218384] Workqueue: events nsim_dev_trap_report_work
[   59.219428] Call Trace:
[   59.219924]  dump_stack+0xa9/0x10e
[   59.220623]  print_address_description.constprop.4+0x21/0x340
[   59.221976]  ? vprintk_func+0x66/0x240
[   59.222752]  __kasan_report.cold.8+0x78/0x91
[   59.223602]  ? nsim_dev_trap_report_work+0xa67/0xad0
[   59.224603]  kasan_report+0xe/0x20
[   59.225296]  nsim_dev_trap_report_work+0xa67/0xad0
[   59.226435]  ? rcu_read_lock_sched_held+0xaf/0xe0
[   59.227512]  ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[   59.228851]  process_one_work+0x98f/0x1760
[   59.229684]  ? pwq_dec_nr_in_flight+0x330/0x330
[   59.230656]  worker_thread+0x91/0xc40
[   59.231587]  ? process_one_work+0x1760/0x1760
[   59.232451]  kthread+0x34a/0x410
[   59.233104]  ? __kthread_queue_delayed_work+0x240/0x240
[   59.234141]  ret_from_fork+0x3a/0x50
[   59.234982]
[   59.235371] Allocated by task 187:
[   59.236189]  save_stack+0x19/0x80
[   59.236853]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[   59.237822]  kmem_cache_alloc_trace+0x14c/0x380
[   59.238769]  __nsim_dev_port_add+0xaf/0x5c0
[   59.239627]  nsim_dev_probe+0x4fc/0x1140
[   59.240550]  really_probe+0x264/0xc00
[   59.241418]  driver_probe_device+0x208/0x2e0
[   59.242255]  __device_attach_driver+0x215/0x2d0
[   59.243150]  bus_for_each_drv+0x154/0x1d0
[   59.243944]  __device_attach+0x1ba/0x2b0
[   59.244923]  bus_probe_device+0x1dd/0x290
[   59.245805]  device_add+0xbac/0x1550
[   59.246528]  new_device_store+0x1f4/0x400
[   59.247306]  bus_attr_store+0x7b/0xa0
[   59.248047]  sysfs_kf_write+0x10f/0x170
[   59.248941]  kernfs_fop_write+0x283/0x430
[   59.249843]  __vfs_write+0x81/0x100
[   59.250546]  vfs_write+0x1ce/0x510
[   59.251190]  ksys_write+0x104/0x200
[   59.251873]  do_syscall_64+0xa4/0x4e0
[   59.252642]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   59.253837]
[   59.254203] Freed by task 187:
[   59.254811]  save_stack+0x19/0x80
[   59.255463]  __kasan_slab_free+0x125/0x170
[   59.256265]  kfree+0x100/0x440
[   59.256870]  nsim_dev_remove+0x98/0x100
[   59.257651]  nsim_bus_remove+0x16/0x20
[   59.258382]  device_release_driver_internal+0x20b/0x4d0
[   59.259588]  bus_remove_device+0x2e9/0x5a0
[   59.260551]  device_del+0x410/0xad0
[   59.263777]  device_unregister+0x26/0xc0
[   59.264616]  nsim_bus_dev_del+0x16/0x60
[   59.265381]  del_device_store+0x2d6/0x3c0
[   59.266295]  bus_attr_store+0x7b/0xa0
[   59.267192]  sysfs_kf_write+0x10f/0x170
[   59.267960]  kernfs_fop_write+0x283/0x430
[   59.268800]  __vfs_write+0x81/0x100
[   59.269551]  vfs_write+0x1ce/0x510
[   59.270252]  ksys_write+0x104/0x200
[   59.270910]  do_syscall_64+0xa4/0x4e0
[   59.271680]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   59.272812]
[   59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[   59.273211]  which belongs to the cache kmalloc-512 of size 512
[   59.275838] The buggy address is located 408 bytes inside of
[   59.275838]  512-byte region [ffff8883cbdd3200, ffff8883cbdd3400)
[   59.278151] The buggy address belongs to the page:
[   59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[   59.281449] flags: 0x200000000010200(slab|head)
[   59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00
[   59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[   59.285608] page dumped because: kasan: bad access detected
[   59.286981]
[   59.287337] Memory state around the buggy address:
[   59.288310]  ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.289763]  ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   59.292945]                             ^
[   59.293815]  ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   59.295220]  ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   59.296872] ==================================================================

Fixes: da58f90f ("netdevsim: Add devlink-trap support")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement "empty" and "dummy" reporters. The first one is really simple
and does nothing. The other one has debugfs files to trigger breakage
and it is able to do recovery. The ops also implement dummy fmsg
content.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>

Do simple dev_info devlink operation implementation which only fills up
the driver name.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add flag to disallow reload and another one that causes reload to
always fail.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When user does create new netdevsim instance using sysfs bus file,
create the devlink instance and related netdev instance in the namespace
of the caller.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All devlink instances are created in init_net and stay there for a
lifetime. Allow user to be able to move devlink instances into
namespaces during devlink reload operation. That ensures proper
re-instantiation of driver objects, including netdevices.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During devlink reload, all driver objects should be reinstantiated with
the exception of devlink instance and devlink resources and params.
Move existing devlink_resource_size_get() calls into fib_create() just
before fib notifier is registered. Also, make sure that extack is
propagated down to fib_notifier_register() call.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the probe/remove function does this separately. Put the
addition an deletion of ports into nsim_dev_create() and
nsim_dev_destroy().
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>