We enabled write-combining for memory-mapped registers in commit
65f0b417, but inhibited it for the
MCDI shared memory where this is not supported.  However,
write-combining mappings also allow read-reordering, which may also
be a problem.

I found that when an SFC9000-family controller is connected to an
Intel 3000 chipset, and write-combining is enabled, the controller
stops responding to PCIe read requests during driver initialisation
while the driver is polling for completion of an MCDI command.  This
results in an NMI and system hang.  Adding read memory barriers
between all reads to the shared memory area appears to reduce but not
eliminate the probability of this.

We have not yet established whether this is a bug in our BIU or in the
PCIe bridge.  For now, work around by mapping the shared memory area
separately.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The ehea driver oopses during memory hotplug if the ports are not
up. A simple testcase:

# ifconfig ethX down
# echo offline > /sys/devices/system/memory/memory32/state

Oops: Kernel access of bad area, sig: 11 [#1]
last sysfs file: /sys/devices/system/memory/memory32/state
REGS: c000000709393110 TRAP: 0300   Not tainted  (2.6.39-rc2-01385-g7ef73bca-dirty)
DAR: 0000000000000000, DSISR: 40000000
...
NIP [c000000000067c98] .__wake_up_common+0x48/0xf0
LR [c00000000006d034] .__wake_up+0x54/0x90
Call Trace:
[c00000000006d034] .__wake_up+0x54/0x90
[d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea]
[d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea]
[c0000000006fc8a8] .notifier_call_chain+0x78/0xf0
[c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0
[c000000000458d78] .memory_notify+0x28/0x40
[c0000000001871d8] .remove_memory+0x208/0x6d0
[c000000000458264] .memory_section_action+0x94/0x140
[c0000000004583ec] .memory_block_change_state+0xdc/0x1d0
[c0000000004585cc] .store_mem_state+0xec/0x160
[c00000000044768c] .sysdev_store+0x3c/0x50
[c00000000020b48c] .sysfs_write_file+0xec/0x1f0
[c00000000018f86c] .vfs_write+0xec/0x1e0
[c00000000018fa88] .SyS_write+0x58/0xd0

To fix this, initialise the waitqueues during port probe instead
of port open.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Acked-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TTY layer expects 0 if the ldisc->open operation succeeded.
Reported-by: NMatvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike the standard case, disabled anti replay detection needs some
nontrivial extra treatment on ESN. RFC 4303 states:

Note: If a receiver chooses to not enable anti-replay for an SA, then
the receiver SHOULD NOT negotiate ESN in an SA management protocol.
Use of ESN creates a need for the receiver to manage the anti-replay
window (in order to determine the correct value for the high-order
bits of the ESN, which are employed in the ICV computation), which is
generally contrary to the notion of disabling anti-replay for an SA.

So return an error if an ESN state with disabled anti replay detection
is inserted for now and add the extra treatment later if we need it.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As it is, we assign the outer modes output function to the dst entry
when we create the xfrm bundle. This leads to two problems on interfamily
scenarios. We might insert ipv4 packets into ip6_fragment when called
from xfrm6_output. The system crashes if we try to fragment an ipv4
packet with ip6_fragment. This issue was introduced with git commit
ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets
as needed). The second issue is, that we might insert ipv4 packets in
netfilter6 and vice versa on interfamily scenarios.

With this patch we assign the inner mode output function to the dst entry
when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner
mode is used and the right fragmentation and netfilter functions are called.
We switch then to outer mode with the output_finish functions.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 44345724 (factorize sync-rcu call in
unregister_netdevice_many) mistakenly removed one test from dev_close()

Following actions trigger a BUG :

modprobe bonding
modprobe dummy
ifconfig bond0 up
ifenslave bond0 dummy0
rmmod dummy

dev_close() must not close a non IFF_UP device.

With help from Frank Blaschka and Einar EL Lueck
Reported-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: NEinar EL Lueck <ELELUECK@de.ibm.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on
ip link set eth2.103 up
rmmod tg3    # driver providing eth2

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
 PGD 11d251067 PUD 11b9e0067 PMD 0
 Oops: 0000 [#1] SMP
 last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex
 CPU 0
 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables]

 Pid: 11494, comm: rmmod Tainted: G        W   2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6
 RIP: 0010:[<ffffffffa0030c9e>]  [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
 RSP: 0018:ffff88007a19bae8  EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002
 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b
 RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00
 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002
 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001
 FS:  0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0
 CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0)
 Stack:
  ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48
  ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6
  ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7
 Call Trace:
  [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q]
  [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q]
  [<ffffffff8137e427>] __dev_close_many+0x87/0xe0
  [<ffffffff8137e507>] dev_close_many+0x87/0x110
  [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240
  [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60
  [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q]
  [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0
  [<ffffffff81479d03>] notifier_call_chain+0x53/0x80
  [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10
  [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20
  [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60
  [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240
  [<ffffffff8137e85f>] rollback_registered+0x2f/0x40
  [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90
  [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30
  [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3]

We should call vlan_gvrp_request_leave() from unregister_vlan_dev(),
not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant()
is called right after unregister_netdevice_queue(). In batch mode,
unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop().
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We occasionally see list corruption using libertas.

While we haven't been able to diagnose this precisely, we have spotted
a possible cause: cmdpendingq is generally modified with driver_lock
held. However, there are a couple of points where this is not the case.

Fix up those operations to execute under the lock, it seems like
the correct thing to do and will hopefully improve the situation.
Signed-off-by: NPaul Fox <pgf@laptop.org>
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We should not switch to non-IBSS channels when working in IBSS mode,
otherwise there are microcode errors, and after some time system
crashes.

This bug is only observable when software scan is used in IBSS mode,
so should be considered as regression after:

commit 0263aa45
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Tue Mar 29 11:24:21 2011 +0200

    iwl3945: disable hw scan by default

However IBSS mode check, which this patch add again, was removed by

commit b2f30e8b
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Thu Jan 21 07:32:20 2010 -0800

    iwlwifi: remove IBSS channel sanity check

That commit claim that mac80211 will not use non-IBSS channel in IBSS
mode, what definitely is not true. Bug probably should be fixed in
mac80211, but that will require more work, so better to apply that patch
temporally, and provide proper mac80211 fix latter.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=34452Reported-and-tested-by: NMikko Rapeli <mikko.rapeli@iki.fi>
Cc: stable@kernel.org # 2.6.38.5+
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

during suspend/S3 state drv_flush is called from mac80211 irrespective of
interface count. In ath9k we queue a work in ath9k_flush which we expect
to be cancelled in the drv_stop call back. during suspend process mac80211
calls drv_stop only when the interface count(local->count) is non-zero.
unfortunately when the network manager is enabled, drv_flush is called
while drv_stop is not called as local->count reaches '0'.
	So fix this by simply checking for the device presence in the
drv_flush call back in the driver before queueing work or anything else.
this patch fixes the following WARNING

	Call Trace:
	[<c014c6e2>] warn_slowpath_common+0x72/0xa0
	[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
	[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
	[<c014c75b>] warn_slowpath_fmt+0x2b/0x30
	[<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211]
	[<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211]
	[<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k]
	[<c016399e>] run_workqueue+0x8e/0x150
	[<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k]
	[<c0163ae4>] worker_thread+0x84/0xe0
	[<c0167a60>] ? autoremove_wake_function+0x0/0x50
	[<c0163a60>] ? worker_thread+0x0/0xe0
	[<c01677d4>] kthread+0x74/0x80
	[<c0167760>] ? kthread+0x0/0x80
	[<c0104087>] kernel_thread_helper+0x7/0x10
---[ end trace 2aff81010df9215b ]---
Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When we are disconnecting, we set PS off, but this happens before we
send the deauth/disassoc request.  When the deauth/disassoc frames are
sent, we trigger the dynamic ps timer, which then times out and turns
PS back on.  Thus, PS remains on after disconnecting, causing problems
when associating again.

This can be fixed by preventing the timer to start when we're not
associated anymore.
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch reverts a2361c87:
"[PATCH] netfilter: xt_conntrack: warn about use in raw table"

Florian Wesphal says:
"... when the packet was sent from the local machine the skb
already has ->nfct attached, and -m conntrack seems to do
the right thing."
Acked-by: NJan Engelhardt <jengelh@medozas.de>
Reported-by: NFlorian Wesphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The mask indicates the bits one wants to zero out, so it needs to be
inverted before applying to the original TOS field.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The IPv6 header is not zeroed out in alloc_skb so we must initialize
it properly unless we want to see IPv6 packets with random TOS fields
floating around. The current implementation resets the flow label
but this could be changed if deemed necessary.

We stumbled upon this issue when trying to apply a mangle rule to
the RST packet generated by the REJECT target module.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

DESCRIPTION
This patch tries to restore the initial init and cleanup
sequences that was before namspace patch.
Netns also requires action when net devices unregister
which has never been implemented. I.e this patch also
covers when a device moves into a network namespace,
and has to be released.

IMPLEMENTATION
The number of calls to register_pernet_device have been
reduced to one for the ip_vs.ko
Schedulers still have their own calls.

This patch adds a function __ip_vs_service_cleanup()
and an enable flag for the netfilter hooks.

The nf hooks will be enabled when the first service is loaded
and never disabled again, except when a namespace exit starts.
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
[horms@verge.net.au: minor edit to changelog]
Signed-off-by: NSimon Horman <horms@verge.net.au>

If the sync daemons run in a name space while it crashes
or get killed, there is no way to stop them except for a reboot.
When all patches are there, ip_vs_core will handle register_pernet_(),
i.e. ip_vs_sync_init() and ip_vs_sync_cleanup() will be removed.

Kernel threads should not increment the use count of a socket.
By calling sk_change_net() after creating a socket this is avoided.
sock_release cant be used intead sk_release_kernel() should be used.

Thanks Eric W Biederman for your advices.
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
[horms@verge.net.au: minor edit to changelog]
Signed-off-by: NSimon Horman <horms@verge.net.au>

The optimizations in commit 255d0dc3
(netfilter: x_table: speedup compat operations) assume that
xt_compat_add_offset is called once per rule.

ebtables however called it for each match/target found in a rule.

The match/watcher/target parser already returns the needed delta, so it
is sufficient to move the xt_compat_add_offset call to a more reasonable
location.

While at it, also get rid of the unused COMPAT iterator macros.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

commit 255d0dc3 (netfilter: x_table: speedup compat operations)
made ebtables not working anymore.

1) xt_compat_calc_jump() is not an exact match lookup
2) compat_table_info() has a typo in xt_compat_init_offsets() call
3) compat_do_replace() misses a xt_compat_init_offsets() call
Reported-by: Ndann frazier <dannf@dannf.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This patch fixes the missing initialization of the start time if
the timestamp support is enabled.

libnetfilter_conntrack/utils# conntrack -E &
libnetfilter_conntrack/utils# ./conntrack_create
tcp      6 109 ESTABLISHED src=1.1.1.1 dst=2.2.2.2 sport=1025 dport=21 packets=0 bytes=0 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=21 dport=1025 packets=0 bytes=0 mark=0 delta-time=1303296401 use=2
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The checksum judgment was mistaken.
  Judgment result
     0:Correct 1:Wrong

This patch fixes the issue.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The collision detection setting was invalid.
When collision occurred, because data was not resent,
there was an issue to which a transmitting throughput falls.

This patch enables the collision detection.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TTY layer expects 0 if the ldisc->open operation succeeded.

Signed-off-by : Matvejchikov Ilya <matvejchikov@gmail.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed bug to make sure 'pvid' retrieval will work on big endian hosts.
Fixed incorrect comparison between the Rx Completion's 16-bit VLAN TCI
and the PVID. Now comparing only the relevant 12 bits corresponding to
the VID.
Renamed 'vid' field under Rx Completion to 'vlan_tag' to reflect
accurate description.
Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and
10G and connected to FIBRE independent of the hardware configuration.
However, when connected to FIBRE the only supported speed is 10G
full-duplex, and the other speeds and modes are only supported
when connected to twisted pair.
Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP Cubic keeps a metric that estimates the amount of delayed
acknowledgements to use in adjusting the window. If an abnormally
large number of packets are acknowledged at once, then the update
could wrap and reach zero. This kind of ACK could only
happen when there was a large window and huge number of
ACK's were lost.

This patch limits the value of delayed ack ratio. The choice of 32
is just a conservative value since normally it should be range of
1 to 4 packets.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The USB protocol this driver implements appears to require 2 bytes of
padding in front of each received packet.  This used to be equal to
the value of NET_IP_ALIGN on x86, so the driver abused that constant
and mostly worked, but this is no longer the case.  The driver also
mixed up the URB and packet lengths, resulting in 2 bytes of junk at
the end of the skb.

Introduce a private constant for the 2 bytes of padding; fix this
confusion and check for the under-length case.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock.  However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.

I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.

The full enormous lockdep warning is:

 =========================================================
 [ INFO: possible irq lock inversion dependency detected ]
 2.6.39-rc6+ #1
 ---------------------------------------------------------
 ifconfig/567 just changed the state of lock:
  (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
 but this lock took another, SOFTIRQ-unsafe lock in the past:
  (&(&adapter->cmd_lock)->rlock){+.+...}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
 4 locks held by ifconfig/567:
  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
  #1:  ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
  #2:  (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
  #3:  (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280

 the shortest dependencies between 2nd lock and 1st lock:
   -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
      HARDIRQ-ON-W at:
                                            [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      SOFTIRQ-ON-W at:
                                            [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      INITIAL USE at:
                                           [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                           [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                           [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                           [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                           [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                           [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                           [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                           [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                           [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                           [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                           [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                           [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                           [<ffffffff813745b6>] driver_register+0x76/0x140
                                           [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                           [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                           [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                           [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                           [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    }
    ... key      at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
    ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
    [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
    [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
    [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
    [<ffffffff81470127>] __dev_open+0xc7/0x100
    [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
    [<ffffffff81470568>] dev_change_flags+0x28/0x70
    [<ffffffff814da960>] devinet_ioctl+0x730/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

  -> (_xmit_ETHER){+.....} ops: 6 {
     HARDIRQ-ON-W at:
                                          [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                          [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                          [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                          [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                          [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                          [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                          [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                          [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                          [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                          [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                          [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                          [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                          [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                          [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                          [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                          [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                          [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                          [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                          [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                          [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                          [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                          [<ffffffff813745b6>] driver_register+0x76/0x140
                                          [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                          [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                          [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                          [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
     INITIAL USE at:
                                         [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                         [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                         [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                         [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                         [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                         [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                         [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                         [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                         [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                         [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                         [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                         [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                         [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                         [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                         [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                         [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                         [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                         [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                         [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                         [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                         [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                         [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                         [<ffffffff813745b6>] driver_register+0x76/0x140
                                         [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                         [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                         [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                         [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                         [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
   }
   ... key      at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
   ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81475618>] __dev_mc_add+0x38/0x90
    [<ffffffff814756a0>] dev_mc_add+0x10/0x20
    [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
    [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
    [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
    [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
    [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
    [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
    [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
    [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
    [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
    [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
    [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
    [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
    [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
    [<ffffffff81373a2e>] driver_attach+0x1e/0x20
    [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
    [<ffffffff813745b6>] driver_register+0x76/0x140
    [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
    [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
    [<ffffffff81002165>] do_one_initcall+0x45/0x190
    [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
    HARDIRQ-ON-W at:
                                        [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                        [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                        [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                        [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                        [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                        [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                        [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                        [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
    IN-SOFTIRQ-W at:
                                        [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
                                        [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
                                        [<ffffffff810666d0>] __do_softirq+0xc0/0x210
                                        [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
                                        [<ffffffff8100d42d>] do_softirq+0xad/0xe0
                                        [<ffffffff81066afe>] irq_exit+0x9e/0xb0
                                        [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
                                        [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
                                        [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
                                        [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
                                        [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
                                        [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
                                        [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                        [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
                                        [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
                                        [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
                                        [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
                                        [<ffffffff814da731>] devinet_ioctl+0x501/0x800
                                        [<ffffffff814db508>] inet_ioctl+0x88/0xa0
                                        [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
                                        [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
                                        [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
                                        [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
                                        [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    INITIAL USE at:
                                       [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                       [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                       [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                       [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                       [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                       [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                       [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                       [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                       [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                       [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                       [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
  }
  ... key      at: [<ffffffff82801be2>] __key.40877+0x0/0x8
  ... acquired at:
    [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
    [<ffffffff8109a32c>] mark_lock+0x19c/0x400
    [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
    [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
    [<ffffffff810666d0>] __do_softirq+0xc0/0x210
    [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
    [<ffffffff8100d42d>] do_softirq+0xad/0xe0
    [<ffffffff81066afe>] irq_exit+0x9e/0xb0
    [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
    [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
    [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
    [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
    [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
    [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
    [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
    [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
    [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
    [<ffffffff814da731>] devinet_ioctl+0x501/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 stack backtrace:
 Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
 Call Trace:
  <IRQ>  [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
  [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
  [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
  [<ffffffff8109a32c>] mark_lock+0x19c/0x400
  [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
  [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
  [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
  [<ffffffff81012255>] ? native_sched_clock+0x15/0x70
  [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
  [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
  [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
  [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
  [<ffffffff810122b9>] ? sched_clock+0x9/0x10
  [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
  [<ffffffff810666d0>] __do_softirq+0xc0/0x210
  [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
  [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
  [<ffffffff8100d42d>] do_softirq+0xad/0xe0
  [<ffffffff81066afe>] irq_exit+0x9e/0xb0
  [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
  [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
  [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
  [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
  [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
  [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
  [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
  [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
  [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
  [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
  [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
  [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
  [<ffffffff814da731>] devinet_ioctl+0x501/0x800
  [<ffffffff8108a3af>] ? local_clock+0x6f/0x80
  [<ffffffff81575898>] ? do_page_fault+0x268/0x560
  [<ffffffff814db508>] inet_ioctl+0x88/0xa0
  [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
  [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
  [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
  [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
  [<ffffffff8117737e>] ? fget_light+0x33e/0x430
  [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
  [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
  [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: NScott J. Goldman <scottjg@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A length of zero (after subtracting two for the type and len fields) for
the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
the subtraction.  The subsequent code may read past the end of the
options value buffer when parsing.  I'm unsure of what the consequences
of this might be, but it's probably not good.
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Acked-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RTR frames do have a valid data length code on CAN.
The driver for SJA1000 did not handle that situation properly.
Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
fix one out of memory issue, which can be reproduced on omap3/4 based
pandaboard/beagle XM easily with steps below:

	- enable runtime pm
	echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control

	- ifconfig eth0 up

	- then out of memroy happened, see [1] for kernel message.

Follows my analysis:
	- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
	is called to schedule dev->bh, then rx urbs are submited to prepare for
	recieving data;

	- some usbnet devices will produce garbage rx packets flood if
	info->reset is not called in usbnet_open.

	- so there is no enough chances for usbnet_bh to handle and release
	recieved skb buffers since many rx interrupts consumes cpu, so out of memory
	for atomic allocation in rx_submit happened.

This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
is opened.

[1], dmesg
[  234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
[  234.712066] usb 1-1.1: rpm_resume flags 0x0
[  234.712066] usb 1-1: rpm_resume flags 0x0
[  234.712097] usb usb1: rpm_resume flags 0x0
[  234.712127] usb usb1: usb auto-resume
[  234.712158] ehci-omap ehci-omap.0: resume root hub
[  234.754028] hub 1-0:1.0: hub_resume
[  234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
[  234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  234.756042] hub 1-0:1.0: rpm_resume flags 0x4
[  234.756072] usb usb1: rpm_resume flags 0x0
[  234.756164] usb usb1: rpm_resume returns 1
[  234.756195] hub 1-0:1.0: rpm_resume returns 0
[  234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
[  234.756225] hub 1-0:1.0: rpm_suspend returns 0
[  234.756256] usb usb1: rpm_resume returns 0
[  234.757141] usb 1-1: usb auto-resume
[  234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  234.816558] usb 1-1: finish resume
[  234.817871] hub 1-1:1.0: hub_resume
[  234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
[  234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule
[  234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us]
[  234.820587] usb 1-1: rpm_resume returns 0
[  234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[  234.820800] hub 1-1:1.0: rpm_resume flags 0x4
[  234.820831] hub 1-1:1.0: rpm_resume returns 0
[  234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.820861] hub 1-1:1.0: rpm_suspend returns 0
[  234.821777] usb 1-1.1: usb auto-resume
[  234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[  234.868591] hub 1-1:1.0: rpm_resume flags 0x4
[  234.868621] hub 1-1:1.0: rpm_resume returns 0
[  234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
[  234.868652] hub 1-1:1.0: rpm_suspend returns 0
[  234.879486] usb 1-1.1: finish resume
[  234.880279] usb 1-1.1: rpm_resume returns 0
[  234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
[  238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
[  238.880218] Backtrace:
[  238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c)
[  238.880249]  r6:00000000 r5:00000000 r4:00000020 r3:00000002
[  238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
[  238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
[  238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154)
[  238.880371]  r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020
[  238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
[  238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190)
[  238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8)
[  238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
[  238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
[  238.880737]  r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20
[  238.880767] r3:bf050b9c
[  238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
[  238.880859]  r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34
[  238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
[  238.880920]  r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac
[  238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
[  238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
[  238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
[  238.881072]  r4:eeeced34 r3:00000001
[  238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
[  238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240)
[  238.881225]  r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8
[  238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64)
[  238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114)
[  238.881286]  r6:0000006d r5:c080c14c r4:c080c100 r3:00020000
[  238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0)
[  238.881317]  r5:00000000 r4:0000006d
[  238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134)
[  238.881378] Exception stack(0xef837e20 to 0xef837e68)
[  238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
[  238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
[  238.881408] 7e60: 20000013 ffffffff
[  238.881408]  r5:fa240100 r4:ffffffff
[  238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8)
[  238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[  238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
[  238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8)
[  238.881530]  r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224
[  238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290)
[  238.881561]  r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001
[  238.881591] r3:c01f907c
[  238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
[  238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98)
[  238.881652]  r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc
[  238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374)
[  238.881713]  r6:c01f62f4 r5:c0211320 r4:ef831efc
[  238.881713] Mem-info:
[  238.881744] Normal per-cpu:
[  238.881744] CPU    0: hi:  186, btch:  31 usd:  38
[  238.881744] CPU    1: hi:  186, btch:  31 usd: 169
[  238.881774] HighMem per-cpu:
[  238.881774] CPU    0: hi:   90, btch:  15 usd:  66
[  238.881774] CPU    1: hi:   90, btch:  15 usd:  86
[  238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
[  238.881805]  active_file:926 inactive_file:2538 isolated_file:0
[  238.881805]  unevictable:0 dirty:10 writeback:0 unstable:0
[  238.881805]  free:57782 slab_reclaimable:864 slab_unreclaimable:186898
[  238.881805]  mapped:632 shmem:144 pagetables:50 bounce:0
[  238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881866] lowmem_reserve[]: 0 1904 1904
[  238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  238.881927] lowmem_reserve[]: 0 0 0
[  238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
[  238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
[  238.882080] 3610 total pagecache pages
[  238.882080] 0 pages in swap cache
[  238.882080] Swap cache stats: add 0, delete 0, find 0/0
[  238.882110] Free swap  = 0kB
[  238.882110] Total swap = 0kB
[  238.933776] 262144 pages of RAM
[  238.933776] 58240 free pages
[  238.933776] 10503 reserved pages
[  238.933776] 187773 slab pages
[  238.933807] 2475 pages shared
[  238.933807] 0 pages swap cached
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 4a94445c (net: Use ip_route_input_noref() in input path)
added a bug in IP defragmentation handling, in case timeout is fired.

When a frame is defragmented, we use last skb dst field when building
final skb. Its dst is valid, since we are in rcu read section.

But if a timeout occurs, we take first queued fragment to build one ICMP
TIME EXCEEDED message. Problem is all queued skb have weak dst pointers,
since we escaped RCU critical section after their queueing. icmp_send()
might dereference a now freed (and possibly reused) part of memory.

Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is
the only possible choice.
Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ctl_table_headers registered with register_net_sysctl_table should
have been unregistered with the equivalent unregister_net_sysctl_table
Signed-off-by: NLucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

84c49d8c ("veth: remove unneeded
ifname code from veth_newlink()") caused regression on veth
creation. This patch reverts the original one.
Reported-by: NMichał Mirosław <mirqus@gmail.com>
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tg3 is supposed to enable WoL by default on adapters which support
that, but it fails to do so unless the adapter's
/sys/devices/.../power/wakeup file contains 'enabled' during the
initialization of the adapter.  Fix that by making tg3 use
device_set_wakeup_enable() to enable wakeup automatically whenever
WoL should be enabled by default.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>