Introduce:

static __always_inline bool static_branch(struct jump_label_key *key);

instead of the old JUMP_LABEL(key, label) macro.

In this way, jump labels become really easy to use:

Define:

        struct jump_label_key jump_key;

Can be used as:

        if (static_branch(&jump_key))
                do unlikely code

enable/disale via:

        jump_label_inc(&jump_key);
        jump_label_dec(&jump_key);

that's it!

For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.

Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.

Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.

Testing:

I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.

jump label configured in
avg: 815.6

jump label *not* configured in (using atomic reads)
avg: 800.1

jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Suggested-by: NH. Peter Anvin <hpa@linux.intel.com>
Tested-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make the tracepoints more robust, making them solid enough to handle compiler
changes by not relying on anything based on compiler-specific behavior with
respect to structure alignment. Implement an approach proposed by David Miller:
use an array of const pointers to refer to the individual structures, and export
this pointer array through the linker script rather than the structures per se.
It will consume 32 extra bytes per tracepoint (24 for structure padding and 8
for the pointers), but are less likely to break due to compiler changes.

History:

commit 7e066fb8 tracepoints: add DECLARE_TRACE() and DEFINE_TRACE()
added the aligned(32) type and variable attribute to the tracepoint structures
to deal with gcc happily aligning statically defined structures on 32-byte
multiples.

One attempt was to use a 8-byte alignment for tracepoint structures by applying
both the variable and type attribute to tracepoint structures definitions and
declarations. It worked fine with gcc 4.5.1, but broke with gcc 4.4.4 and 4.4.5.

The reason is that the "aligned" attribute only specify the _minimum_ alignment
for a structure, leaving both the compiler and the linker free to align on
larger multiples. Because tracepoint.c expects the structures to be placed as an
array within each section, up-alignment cause NULL-pointer exceptions due to the
extra unexpected padding.

(this patch applies on top of -tip)
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
LKML-Reference: <20110126222622.GA10794@Krystal>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add __rcu annotation to :
	(struct tracepoint)->funcs
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D22D4F1.50505@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add missing comma within the TRACE_EVENT() example in tracepoint.h.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110106184532.GA2526@Krystal>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are instances in the kernel that we only want to trace
a tracepoint when a certain condition is set. But we do not
want to test for that condition in the core kernel.
If we test for that condition before calling the tracepoin, then
we will be performing that test even when tracing is not enabled.
This is 99.99% of the time.

We currently can just filter out on that condition, but that happens
after we write to the trace buffer. We just wasted time writing to
the ring buffer for an event we never cared about.

This patch adds:

   TRACE_EVENT_CONDITION() and DEFINE_EVENT_CONDITION()

These have a new TP_CONDITION() argument that comes right after
the TP_ARGS().  This condition can use the parameters of TP_ARGS()
in the TRACE_EVENT() to determine if the tracepoint should be traced
or not. The TP_CONDITION() will be placed in a if (cond) trace;

For example, for the tracepoint sched_wakeup, it is useless to
trace a wakeup event where the caller never actually wakes
anything up (where success == 0). So adding:

	TP_CONDITION(success),

which uses the "success" parameter of the wakeup tracepoint
will have it only trace when we have successfully woken up a
task.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This introduces the new TRACE_EVENT_FLAGS() macro in order
to set up initial event flags value.

This macro must simply follow the definition of a trace event
and take the event name and the flag value as parameters:

TRACE_EVENT(my_event, .....
....
);

TRACE_EVENT_FLAGS(my_event, 1)

This will set up 1 as the initial my_event->flags value.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

Make use of the jump label infrastructure for tracepoints.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <a9ba2056e2c9cf332c3c300b577463ce66ff23a8.1284733808.git.jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The header file include/linux/tracepoint.h may be included without
include/linux/errno.h and then the compiler will fail on building for
undelcared ENOSYS. This patch fixes this problem via including <linux/errno.h>
to include/linux/tracepoint.h.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <1277118549-622-1-git-send-email-wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This check is meant to be used by tracepoint users which do a direct cast of
callbacks to (void *) for direct registration, thus bypassing the
register_trace_##name and unregister_trace_##name checks.

This permits to ensure that the callback type matches the function type at the
call site, but without generating any code.
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100430165959.GA25605@Krystal>
CC: Ingo Molnar <mingo@elte.hu>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Li Zefan <lizf@cn.fujitsu.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When more than one header is included under CREATE_TRACE_POINTS
the DECLARE_TRACE() macro is not defined back to its original meaning
and the second include will fail to initialize the TRACE_EVENT()
and DECLARE_TRACE() correctly.

To fix this the tracepoint.h file moves the define of DECLARE_TRACE()
out of the #ifdef _LINUX_TRACEPOINT_H protection (just like the
define of the TRACE_EVENT()). This way the define_trace.h will undef
the DECLARE_TRACE() at the end and allow new headers to start
from scratch.

This patch also requires fixing the include/events/napi.h

It currently uses DECLARE_TRACE() and should be converted to a TRACE_EVENT()
format. But I'll leave that change to the authors of that file.
But since the napi.h file depends on using the CREATE_TRACE_POINTS
and does not define its own DEFINE_TRACE() it must use the define_trace.h
method instead.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

tracepoint.h uses rcu_dereference(), which triggers this warning:

[    0.701161] ===================================================
[    0.702211] [ INFO: suspicious rcu_dereference_check() usage. ]
[    0.702716] ---------------------------------------------------
[    0.703203] include/trace/events/workqueue.h:68 invoked rcu_dereference_check() without protection!
[    0.703971] [ 0.703990] other info that might help us debug this:
[    0.703993]
[    0.705590]
[    0.705604] rcu_scheduler_active = 1, debug_locks = 0
[    0.706712] 1 lock held by swapper/1:
[    0.707229]  #0:  (cpu_add_remove_lock){+.+.+.}, at: [<c0142f54>] cpu_maps_update_begin+0x14/0x20
[    0.710097]
[    0.710106] stack backtrace:
[    0.712602] Pid: 1, comm: swapper Not tainted 2.6.34-rc1-tip-01613-g72662bb #168
[    0.713231] Call Trace:
[    0.713997]  [<c017174d>] lockdep_rcu_dereference+0x9d/0xb0
[    0.714746]  [<c015a117>] create_workqueue_thread+0x107/0x110
[    0.715353]  [<c015aee0>] ? worker_thread+0x0/0x340
[    0.715845]  [<c015a8e8>] __create_workqueue_key+0x138/0x240
[    0.716427]  [<c0142f92>] ? cpu_maps_update_done+0x12/0x20
[    0.717012]  [<c086b12f>] init_workqueues+0x6f/0x80
[    0.717530]  [<c08576d2>] kernel_init+0x102/0x1f0
[    0.717570]  [<c08575d0>] ? kernel_init+0x0/0x1f0
[    0.718944]  [<c01030fa>] kernel_thread_helper+0x6/0x10
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B9F48AD.4000404@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?

To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:

  DECLARE_EVENT_CLASS(class)

    DEFINE_EVENT(class, event1)
    DEFINE_EVENT(class, event2)
    DEFINE_EVENT(class, event3)

To complete this logic we should also rename TRACE_EVENT() to:

  DEFINE_SINGLE_EVENT(single_event)

... but in a more quiet moment of the kernel cycle.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After creating the TRACE_EVENT_TEMPLATE I started to look at other
trace points to see what duplication was made. I noticed that there
are several trace points where they are almost identical except for
the name and the output format. Since TRACE_EVENT_TEMPLATE was successful
in bringing down the size of trace events, I added a DEFINE_EVENT_PRINT.

DEFINE_EVENT_PRINT is used just like DEFINE_EVENT is. That is, the
DEFINE_EVENT_PRINT also uses a TRACE_EVENT_TEMPLATE, but it allows the
developer to overwrite the print format. If there are two or more
TRACE_EVENTS that are identical except for the name and print, then
they can be converted to use a TRACE_EVENT_TEMPLATE. Since the
TRACE_EVENT_TEMPLATE already does the print output, the first trace event
would have its print format held in the TRACE_EVENT_TEMPLATE and
be defined with a DEFINE_EVENT. The rest will use the DEFINE_EVENT_PRINT
and override the print format.

Converting the sched trace points to both DEFINE_EVENT and
DEFINE_EVENT_PRINT. Five were converted to DEFINE_EVENT and two were
converted to DEFINE_EVENT_PRINT.

I was able to get the following:

$ size kernel/sched.o-*
   text	   data	    bss	    dec	    hex	filename
  79299	   6776	   2520	  88595	  15a13	kernel/sched.o-notrace
 101941	  11896	   2584	 116421	  1c6c5	kernel/sched.o-templ
 104779	  11896	   2584	 119259	  1d1db	kernel/sched.o-trace

sched.o-notrace is the scheduler compiled with no trace points.
sched.o-templ is with the use of DEFINE_EVENT and DEFINE_EVENT_PRINT
sched.o-trace is the current trace events.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are some places in the kernel that define several tracepoints and
they are all identical besides the name. The code to enable, disable and
record is created for every trace point even if most of the code is
identical.

This patch adds TRACE_EVENT_TEMPLATE that lets the developer create
a template TRACE_EVENT and create trace points with DEFINE_EVENT, which
is based off of a given template. Each trace point used by this
will share most of the code, and bring down the size of the kernel
when there are several duplicate events.

Usage is:

TRACE_EVENT_TEMPLATE(name, proto, args, tstruct, assign, print);

Which would be the same as defining a normal TRACE_EVENT.

To create the trace events that the trace points will use:

DEFINE_EVENT(template, name, proto, args) is done. The template
is the name of the TRACE_EVENT_TEMPLATE to use. The name is the
name of the trace point. The parameters proto and args must be the same
as the proto and args of the template. If they are not the same,
then a compile error will result. I tried hard removing this duplication
but the C preprocessor is not powerful enough (or my CPP magic
experience points is not at a high enough level) to not need them.

A lot of trace events are coming in with new XFS development. Most of
the trace points are identical except for the name. The following shows
the advantage of having TRACE_EVENT_TEMPLATE:

$ size fs/xfs/xfs.o.*
    text          data     bss     dec     hex filename
  452114          2788    3520  458422   6feb6 fs/xfs/xfs.o.old
  638482         38116    3744  680342   a6196 fs/xfs/xfs.o.template
  996954         38116    4480 1039550   fdcbe fs/xfs/xfs.o.trace

xfs.o.old is without any tracepoints.
xfs.o.template uses the new TRACE_EVENT_TEMPLATE.
xfs.o.trace uses the current TRACE_EVENT macros.
Requested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fix various Documentation/ paths in include/linux/.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the tracepoint documentation path in tracepoints headers and
a misaligned tabulation.
Signed-off-by: NLi Hong <lihong.hi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <3a3680030909220300h7cf18849q4d4702b9d4feaa67@mail.gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The commit:
  commit 5ac35daa
  Author: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
  tracing/events: fix the include file dependencies

Moved the TRACE_EVENT out of the ifdef protection of tracepoints.h
but uses the define of TRACE_EVENT itself as protection. This patch
adds comments to explain why.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_EVENT depends on the include/linux/tracepoint.h first
and include/trace/ftrace.h later, if we include the ftrace.h early,
a building error will occur.

Both define TRACE_EVENT in trace_a.h and trace_b.h, if we include
those in .c file, like this:

#define CREATE_TRACE_POINTS
include <trace/events/trace_a.h>
include <trace/events/trace_b.h>

The above will not work, because the TRACE_EVENT was re-defined by
the previous .h file.
Reported-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A937F5E.3020802@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It's not strictly correct for the tracepoint reg/unreg callbacks to
occur when a client is hooking up, because the actual tracepoint may not
be present yet.  This happens to be fine for syscall, since that's in
the core kernel, but it would cause problems for tracepoints defined in
a module that hasn't been loaded yet.  It also means the reg/unreg has
to be EXPORTed for any modules to use the tracepoint (as in SystemTap).

This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces
DEFINE_TRACE_FN which stores the callbacks in struct tracepoint.  The
callbacks are used now when the active state of the tracepoint changes
in set_tracepoint & disable_tracepoint.

This also introduces TRACE_EVENT_FN, so ftrace events can also provide
registration callbacks if needed.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Introduce a new 'DECLARE_TRACE_WITH_CALLBACK()' macro, so that
tracepoints can associate an external register/unregister function.

This prepares for the syscalls tracer conversion to trace events. We
will need to perform arch level operations once a syscall event is
turned on/off, such as TIF flags setting, hence the need of such
specific callbacks.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.

And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.

debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/

Fix inconsistency of directory name to mount debugfs filesystem.

* From Steven Rostedt
  - find_debugfs() and tracing_files() in this patch.
Signed-off-by: NGeunSik Lim <geunsik.lim@samsung.com>
Acked-by     : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by  : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by  : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The TRACE_FORMAT macro has been deprecated by the TRACE_EVENT macro.
There are no more users. All new users must use the TRACE_EVENT macro.

[ Impact: remove old functionality ]

Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: clean up

Neil Horman (et. al.) criticized the way the trace events were broken up
into two files. The reason for that was that ftrace needed to separate out
the declarations from where the #include <linux/tracepoint.h> was used.
It then dawned on me that the tracepoint.h header only needs to define the
TRACE_EVENT macro if it is not already defined.

The solution is simply to test if TRACE_EVENT is defined, and if it is not
then the linux/tracepoint.h header can define it. This change consolidates
all the <traces>.h and <traces>_event_types.h into the <traces>.h file.
Reported-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NTheodore Tso <tytso@mit.edu>
Reported-by: NJiaying Zhang <jiayingz@google.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: clean up

There existed a lot of <space><tab>'s in the tracing code. This
patch removes them.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up / comments

Kosaki Motohiro asked about an explanation to the TRACE_EVENT macro.
Ingo Molnar replied with a nice description.

This patch takes the description that Ingo wrote (with some slight
modifications) and adds it to the tracepoint.h file.
Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

In trying to stay consistant with the C style format in the TRACE_EVENT
macro, it makes more sense to do the printk after the assigning of
the variables.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

The TRACE_EVENT_FORMAT macro is no longer used by trace points
and only the DECLARE_TRACE, TRACE_FORMAT or TRACE_EVENT macros should
be used by them. Although the TRACE_EVENT_FORMAT macro is still used
by the internal tracing utility, it should not be used in core
kernel code.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up and enhancement

The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its
ability to save data as well as to print the record out. Working with
Ingo Molnar, we came up with a new format that is much more pleasing to
the eye of C developers. This new macro is more C style than the old
macro, and is more obvious to what it does.

Here's the example. The only updated macro in this patch is the
sched_switch trace point.

The old method looked like this:

 TRACE_EVENT_FORMAT(sched_switch,
        TP_PROTO(struct rq *rq, struct task_struct *prev,
                struct task_struct *next),
        TP_ARGS(rq, prev, next),
        TP_FMT("task %s:%d ==> %s:%d",
              prev->comm, prev->pid, next->comm, next->pid),
        TRACE_STRUCT(
                TRACE_FIELD(pid_t, prev_pid, prev->pid)
                TRACE_FIELD(int, prev_prio, prev->prio)
                TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
                                    next_comm,
                                    TP_CMD(memcpy(TRACE_ENTRY->next_comm,
                                                 next->comm,
                                                 TASK_COMM_LEN)))
                TRACE_FIELD(pid_t, next_pid, next->pid)
                TRACE_FIELD(int, next_prio, next->prio)
        ),
        TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d")
        );

The above method is hard to read and requires two format fields.

The new method:

 /*
  * Tracepoint for task switches, performed by the scheduler:
  *
  * (NOTE: the 'rq' argument is not used by generic trace events,
  *        but used by the latency tracer plugin. )
  */
 TRACE_EVENT(sched_switch,

	TP_PROTO(struct rq *rq, struct task_struct *prev,
		 struct task_struct *next),

	TP_ARGS(rq, prev, next),

	TP_STRUCT__entry(
		__array(	char,	prev_comm,	TASK_COMM_LEN	)
		__field(	pid_t,	prev_pid			)
		__field(	int,	prev_prio			)
		__array(	char,	next_comm,	TASK_COMM_LEN	)
		__field(	pid_t,	next_pid			)
		__field(	int,	next_prio			)
	),

	TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
		__entry->next_comm, __entry->next_pid, __entry->next_prio),

	TP_fast_assign(
		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
		__entry->prev_pid	= prev->pid;
		__entry->prev_prio	= prev->prio;
		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
		__entry->next_pid	= next->pid;
		__entry->next_prio	= next->prio;
	)
 );

This macro is called TRACE_EVENT, it is broken up into 5 parts:

 TP_PROTO:        the proto type of the trace point
 TP_ARGS:         the arguments of the trace point
 TP_STRUCT_entry: the structure layout of the entry in the ring buffer
 TP_printk:       the printk format
 TP_fast_assign:  the method used to write the entry into the ring buffer

The structure is the definition of how the event will be saved in the
ring buffer. The printk is used by the internal tracing in case of
an oops, and the kernel needs to print out the format of the record
to the console. This the TP_printk gives a means to show the records
in a human readable format. It is also used to print out the data
from the trace file.

The TP_fast_assign is executed directly. It is basically like a C function,
where the __entry is the handle to the record.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

The macros TPPROTO, TPARGS, TPFMT, TPRAWFMT, and TPCMD all look a bit
ugly. This patch adds an underscore to their names.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Peter Zijlstra warned that TPPROTO and TPARGS might become something
other than a simple copy of itself. To prevent this from having
side effects in the TRACE_FORMAT macro in tracepoint.h, we add a
PARAMS() macro to be defined as just a wrapper.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should
be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it
TRACE_FORMAT.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch creates a DEFINE_TRACE_FMT to map to DECLARE_TRACE.
This allows for the developers to place format strings and
args in with their tracepoint declaration. A tracer may now
override the DEFINE_TRACE_FMT macro and use it to record
a default format.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: API *CHANGE*. Must update all tracepoint users.

Add DEFINE_TRACE() to tracepoints to let them declare the tracepoint
structure in a single spot for all the kernel. It helps reducing memory
consumption, especially when declaring a lot of tracepoints, e.g. for
kmalloc tracing.

*API CHANGE WARNING*: now, DECLARE_TRACE() must be used in headers for
tracepoint declarations rather than DEFINE_TRACE(). This is the sane way
to do it. The name previously used was misleading.

Updates scheduler instrumentation to follow this API change.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

That's overkill, takes space. We have a global tracepoint registery in
header files anyway.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: bugfix.

Unregistering a tracepoint can fail. Return the error value.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make sure tracepoints can be called within ftrace callbacks.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new tracepoint APIs to allow the batched registration of probes

new APIs separate tracepoint_probe_register(),
tracepoint_probe_unregister() into 2 steps. The first step of them
is just update tracepoint_entry, not connect or disconnect.

this patch introduces tracepoint_probe_update_all() for update all.

these APIs are very useful for registering lots of probes
but just updating once. Another very important thing is that
*_noupdate APIs do not require module_mutex.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Turn tracepoint synchronize unregister into a static inline. There is no
reason to keep it as a macro over a static inline.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>