The well-known IANA protocol port 3260 (iscsi-target 0x0cbc) and the
ether-types 0x8906 (ETH_P_FCOE) and 0x8914 (ETH_P_FIP) are already defined
in kernel header files.  Use those definitions instead of open-coding the
same.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Normally, the bootloader will already initialize the MAC address
registers of the ENETC and the driver will just use them or generate a
random one, if it is not initialized.

Add a new way to provide the MAC address: via device tree. Besides the
usual 'mac-address' property, there is also the possibility to fetch it
via a NVMEM provider. The sl28 board stores the MAC address in the SPI
NOR flash OTP region. Having this will allow linux to fetch the MAC
address from there without being dependent on the bootloader.

No in-tree boards have the device tree properties set, thus for these,
this is a no-op.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following coccicheck warning:

./drivers/net/ethernet/sfc/enum.h:80:7-28: duplicated argument to |
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following clang warning:

drivers/atm/idt77252.c:1787:1: warning: unused function
'idt77252_fbq_level' [-Wunused-function].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for the [g|s]et_pauseparam ethtool ops. It considers
that the chip doesn't support pause frame use in jumbo mode.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Synopsis MAC controller supports auxiliary snapshot feature that
allows user to store a snapshot of the system time based on an external
event.

This patch add supports to the above mentioned feature. Users will be
able to triggered capturing the time snapshot from user-space using
application such as testptp or any other applications that uses the
PTP_EXTTS_REQUEST ioctl request.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NTan Tee Min <tee.min.tan@intel.com>
Co-developed-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setting 10G without autonegotiation is invalid according to
phy_ethtool_ksettings_set(). Thus, we need to set it during
autonegotiation.

If 1G autonegotiation can't complete for quite a time, but there is
signal in line, switch line interface type to 10GBase-R, if supported,
in hope for link to be established.

And vice versa. If 10GBase-R link can't be established for quite a time,
and autonegotiation is enabled, and there is signal in line, switch line
interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if
supported.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No functional changes, just move read link status routines below
autonegotiation configuration to make future functional changes more
distinct.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some SFP modules uses RX_LOS for link indication. In such cases link
will be always up, even without cable connected. RX_LOS changes will
trigger link_up()/link_down() upstream operations. Thus, check that SFP
link is operational before actual read link status.

If there is no SFP cage connected to the tranciever, check only PMD
Recieve Signal Detect register.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow to create an RQ which is not registered as an XDP RQ. For example:
the trap-RQ doesn't register as an XDP RQ.

Fixes: 869c5f92 ("net/mlx5e: Generalize open RQ")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There should be no spaces at the start of the line.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

void function return statements are not generally useful.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There should be a blank lines after declarations.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.

Addresses-Coverity: ("Logically dead code")
Fixes: 7dfee4b1 ("net/mlx5: IPsec, Refactor SA handle creation and destruction")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The cmd size is 8K so use kvzalloc().
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

mlx5dr_action is a generally used data structure, and there is an
union for different types of actions in it. The size of mlx5dr_action
is about 72 bytes, but for those actions with fewer fields, most of
the allocated memory is wasted.
Remove this union, and mlx5dr_action becomes a generic action header.
Then actions are dynamically allocated with needed memory, the data
for each action is stored right after the header.
Signed-off-by: NJianbo Liu <jianbol@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

SF's hardware function id is already stored in mlx5_sf. Reuse it,
instead of querying the hw table.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

At many places in the code, device pointer is directly available. Make
use of it, instead of accessing it from the table.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently eswitch flow steering (FS) namespace of vport's ingress and
egress ACL are enabled when FS layer is initialized. This is done even
when eswitch is diabled. This demands that total eswitch ports to be
known to FS layer without eswitch in use.

Given the FS core is not dependent on eswitch, make namespace init and
cleanup routines as helper routines to be invoked only when eswitch is
needed.

With this change, ingress and egress ACL namespaces are created only
when eswitch legacy/offloads mode is enabled.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently eswitch offers two modes. Legacy and offloads.
Offloads code is already in its own file eswitch_offloads.c

However eswitch.c contains the eswitch legacy code and common
infrastructure  code.

To enable future extensions and to better manage generic common eswitch
infrastructure code, move the legacy code to its own legacy.c file.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Convert ESW_ALLOWED macro to a helper routine so that it can be used in
other eswitch files.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Make cleanup sequence mirror of init sequence for cleaning up reps
and freeing vports.

Also when reps initialization fails, there is no need to perform reps
cleanup.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Vport number is 16-bit field in hardware. Make it u16.

Move location of vport in the structure so that it reduces a hole
in the structure.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

With vhca events, SF state is queried through the VHCA events. Device no
longer expects SF bitmap in the query eswitch functions command.

Hence, remove it to simplify the code.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently each packet inserted in eswitch is tagged with a internal
metadata to indicate source vport. Metadata tagging is not always
needed. Metadata insertion is needed for multi-port RoCE, failover
between representors and stacked devices. In many other cases,
metadata enablement is not needed.

Metadata insertion slows down the packet processing rate of the E-switch
when it is in switchdev mode.

Below table show performance gain with metadata disabled for VXLAN
offload rules in both SMFS and DMFS steering mode on ConnectX-5 device.

----------------------------------------------
| steering | metadata | pkt size | rx pps    |
| mode     |          |          | (million) |
----------------------------------------------
| smfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| smfs     | enabled  | 128Bytes | 36        |
----------------------------------------------
| dmfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| dmfs     | enabled  | 128Bytes | 36        |
----------------------------------------------

Hence, allow user to disable metadata using driver specific devlink
parameter. Metadata setting of the eswitch is applicable only for the
switchdev mode.

Example to show and disable metadata before changing eswitch mode:
$ devlink dev param show pci/0000:06:00.0 name esw_port_metadata
pci/0000:06:00.0:
  name esw_port_metadata type driver-specific
    values:
      cmode runtime value true

$ devlink dev param set pci/0000:06:00.0 \
	  name esw_port_metadata value false cmode runtime

$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
---
changelog:
v1->v2:
 - added performance numbers in commit log
 - updated commit log and documentation for switchdev mode
 - added explicit note on when user can disable metadata in
   documentation

During the handling of CAN bus errors, a CAN error SKB is allocated
using alloc_can_err_skb(). Even if the allocation of the SKB fails,
the function continues in order to do the stats handling.

All access to the can_frame pointer (cf) should be guarded by an if
statement:
	if (cf)

However, the increment of the rx_bytes stats:
	netdev->stats.rx_bytes += cf->can_dlc;
dereferences the cf pointer and was not guarded by an if condition
leading to a NULL pointer dereference if the can_err_skb() function
failed.

Replacing the cf->can_dlc by the macro CAN_ERR_DLC (which is the
length of any CAN error frames) solves this NULL pointer dereference.

Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/r/20210413114242.2760-1-mailhol.vincent@wanadoo.frReported-by: NArunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

s/Reprogam/Reprogram/
Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Remove the 'ixgbe_mc_addr_itr' typedef as it is not used.
Signed-off-by: NChen Lin <chen.lin5@zte.com.cn>
Tested-by: NDave Switzer <david.switzer@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The Broadcom PHY is used in switches, so add the ID, and hook it up.

This upstreams the Linux kernel patch from the network operating system
SONiC from February 2020 [1].

[1]: https://github.com/Azure/sonic-linux-kernel/pull/122Signed-off-by: NJostar Yang <jostar_yang@accton.com>
Signed-off-by: NGuohan Lu <lguohan@gmail.com>
Signed-off-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The driver was removed last year, but the static initialization got left
behind by accident.

Fixes: a10079c6 ("staging: remove hp100 driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we added the dpaa2_switch_acl_entry_add() function in the previous
patches to hide all the details of actually adding the ACL entry by
issuing a firmware command, let's use it also for adding a CPU trap for
the STP frames.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support TC_SETUP_CLSMATCHALL by using the same ACL table entries
framework as for tc flower. Adding a matchall rule is done by installing
an entry which has a mask of all zeroes, thus matching on any packet.

This can be used as a catch-all type of rule if used correctly, ie the
priority of the matchall filter should be kept as the lowest one in the
entire filter block.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for tc flower hardware offload on the ingress
path. Shared filter blocks are supported by sharing a single ACL table
between multiple ports.

The following flow keys are supported:
 - Ethernet: dst_mac/src_mac
 - IPv4: dst_ip/src_ip/ip_proto/tos
 - VLAN: vlan_id/vlan_prio/vlan_tpid/vlan_dei
 - L4: dst_port/src_port

As per flow actions, the following are supported:
 - drop
 - mirred egress redirect
 - trap
Each ACL entry (filter) can be setup with only one of the listed
actions.

A sorted single linked list is used to keep the ACL entries by their
order of priority. When adding a new filter, this enables us to quickly
ascertain if the new entry has the highest priority of the entire block
or if we should make some space in the ACL table by increasing the
priority of the filters already in the table.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the default ACL trap rule for STP frames to have the highest
priority.

In the same ACL table will reside both default rules added by the driver
for its internal use as well as rules added with tc flower.  In this
case, the default rules such as the STP one that we already have should
have the highest priority.

Also, remove the check for a full ACL table since we already know that
it's sized so that we don't hit this case.  The last thing changes is
that default trap filters will not be counted in the acl_tbl's num_rules
variable since their number doesn't change.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a new structure - dpaa2_switch_acl_tbl - to hold all data
related to an ACL table: number of rules added, ACL table id, etc.
This will be used more in the next patches when adding support for
sharing an ACL table between ports.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The copy_to_user() function returns the number of bytes that it wasn't
able to copy.  We want to return -EFAULT to the user.

Fixes: fee6efce ("ionic: add hw timestamp support files")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We add the support of XDP ZC TX submission and cleaning into
stmmac_tx_clean(). The function is made to clean as many TX complete
frames as possible, i.e. limit by priv->dma_tx_size instead of NAPI
budget. For TX ring that is associated with XSK pool, the function
stmmac_xdp_xmit_zc() is introduced to TX frame buffers from XSK pool by
using xsk_tx_peek_desc(). To make stmmac_tx_clean() support the cleaning
of XSK TX frames, STMMAC_TXBUF_T_XSK_TX TX buffer type is introduced.

As stmmac_tx_clean() uses the return value to cue whether NAPI function
should continue to poll, we augment the caller of stmmac_tx_clean() to
pass NAPI budget instead of priv->dma_tx_size through 'budget' input and
made stmmac_tx_clean() to always clean up-to the TX ring size instead.
This allows us to use the return boolean status of stmmac_xdp_xmit_zc()
to decide if XSK TX work is done or not: If true, set 'xmits' to return
'budget - 1' so that NAPI poll may exit. Else, set 'xmits' to return
'budget' to make NAPI poll continue to poll since XSK TX work is not
done. Finally, at the end of stmmac_tx_clean(), the function now take
a maximum value between 'count' and 'xmits' so that status from both
TX cleaning and XSK TX (only for XDP ZC) is considered.

This patch adds a new NAPI poll called stmmac_napi_poll_rxtx() that is
meant to be enabled/disabled for RX and TX ring that are bound to XSK
pool. This NAPI poll function starts with cleaning TX ring, then submits
XSK TX frames to TX ring before proceed to perform RX operations, i.e.
, receiving RX frames and replenishing RX ring with RX free buffers
obtained from XSK pool. Therefore, during XSK RX and TX setup, the driver
enables stmmac_napi_poll_rxtx() for RX and TX operations, then during
XSK RX and TX pool tear-down, the driver reenables the exisiting
independent NAPI poll functions accordingly: stmmac_napi_poll_rx() and
stmmac_napi_poll_tx().
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the support for receiving packet via AF_XDP zero-copy
mechanism.

XDP ZC uses 1:1 mapping of XDP buffer to receive packet, therefore the
use of split header is not used currently. The 'xdp_buff' is declared as
union together with a struct that contains 'page', 'addr' and
'page_offset' that are associated with primary buffer.

RX buffers are now allocated either via page_pool or xsk pool. For RX
buffers from xsk_pool they are allocated and deallocated using below
functions:

 * stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv, u32 queue)
 * dma_free_rx_xskbufs(struct stmmac_priv *priv, u32 queue)

With above functions now available, we then extend the following driver
functions to support XDP ZC:
 * stmmac_reinit_rx_buffers()
 * __init_dma_rx_desc_rings()
 * init_dma_rx_desc_rings()
 * __free_dma_rx_desc_resources()

Note: stmmac_alloc_rx_buffers_zc() may return -ENOMEM due to RX XDP
buffer pool is not allocated (e.g. samples/bpf/xdpsock TX-only). But,
it is still ok to let TX XDP ZC to continue, therefore, the -ENOMEM
is silently ignored to let the driver succcessfully transition to XDP
ZC mode for the said RX and TX queue.

As XDP ZC buffer size is different, the DMA buffer size is required
to be reprogrammed accordingly for RX DMA/Queue that is populated with
XDP buffer from XSK pool.

Next, to add or remove per-queue XSK pool, stmmac_xdp_setup_pool()
will call stmmac_xdp_enable_pool() or stmmac_xdp_disable_pool()
that in-turn coordinates the tearing down and setting up RX ring via
RX buffers and descriptors removal and reallocation through
stmmac_disable_rx_queue() and stmmac_enable_rx_queue(). In addition,
stmmac_xsk_wakeup() is added to initiate XDP RX buffer replenishing
by signalling user application to add available XDP frames back to
FILL queue.

For RX processing using XDP zero-copy buffer, stmmac_rx_zc() is
introduced which is implemented with the assumption that RX split
header is disabled. For XDP verdict is XDP_PASS, the XDP buffer is
copied into a sk_buff allocated through stmmac_construct_skb_zc()
and sent to Linux network GRO inside stmmac_dispatch_skb_zc(). Free RX
buffers are then replenished using stmmac_rx_refill_zc()

v2: introduce __stmmac_disable_all_queues() to contain the original code
    that does napi_disable() and then make stmmac_setup_tc_block_cb()
    to use it. Move synchronize_rcu() into stmmac_disable_all_queues()
    that eventually calls __stmmac_disable_all_queues(). Then,
    make both stmmac_release() and stmmac_suspend() to use
    stmmac_disable_all_queues(). Thanks David Miller for spotting the
    synchronize_rcu() issue in v1 patch.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prepare stmmac_xdp_run_prog() for AF_XDP zero-copy support which will be
added by upcoming patches by splitting out the XDP verdict processing
into __stmmac_xdp_run_prog() and it callable for XDP ZC path which does
not need to verify bpf_prog is not NULL.

The stmmac_xdp_run_prog() is used for regular XDP Rx path which requires
bpf_prog to be verified.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Below functions are made to be per-queue in preparation of XDP ZC:

 __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t flags)
 __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue)

The original functions below are stay maintained for all queue usage:

 init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
 init_dma_tx_desc_rings(struct net_device *dev)
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>