When the firmware is loaded, its internal timer (GP2) is
reset and all the time_sync in the BSS table is now
unusable. Ask cfg80211 to purge the BSS table.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1b703b6f4c05.I0b5c51aa87e86c964e2eae6d959a96e232840ef5@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

FW now puts in the struct version, the TLV version so we also check
it to make sure it matches.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.bc1dfb56ffbd.I99d8085cccc8687805781ccc43e189dbcef0e63b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The range response notification has several versions. Check the
notification size according to the expected notification version.
Notifications with incorrect size will be ignored.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.ee57c3214d05.I810d7de33fb08001ef1a2e24714d5b68932e088e@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The RX handlers for probe response data and channel switch weren't
hooked up properly, fix that.

Fixes: 86e177d8 ("iwlwifi: mvm: add NOA and CSA to a probe response")
Fixes: d3a108a4 ("iwlwifi: mvm: Support CSA countdown offloading")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Previously, we added checks that the contained MPDU size is long
enough, but really we should also check that the notification
itself fits into the data. Add some checks for that.

Also add unlikely() annotations on the previously added checks.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.51cc04cf1e3e.I7bfd6809f8f5feb75f79397646e6656e95688a0e@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add a PCI ID for snj with mr in AX family.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If the channel switch delay that we would incur after the channel
switch actually happens is longer than the quiet time we're willing
to tolerate, disconnect as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.3bc3449922da.Ib0255deb67b2fc21317e274adcacb545bb1dc669@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

There are some races in the hardware that can possibly lead to
a bus lockup later during a restart when we manage to kill the
firmware at a bad time (while it's accessing the bus).

To work around this, add support for a new handshake between
firmware and driver to ensure that the firmware is in a well-
known state before we kill it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7756fcc9865c.I13de65e0ffcb4186dd4c1a465f66df2e98c9a947@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start tracking not just if the firmware is dead or alive,
but also if it's starting.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.33e50d40b688.I8bbd41af7aa5e769273a6fc1c06fbf548dd2eb26@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

When we get a channel switch with a very long quiet period, we schedule
a work to disconnect after a while. This work runs in background. In the
meanwhile, we keep getting beacons and sending FW modify command for each.
This has a potential race, where we modify the CSA after we aborted it.

Protect the flow by setting csa_failed to true in case we abort, and check
it before sending the modify command.

This required a modification to the way we treat csa_failed in
iwl_mvm_post_channel_switch:
1. The variable isn't being reset anymore, so we can still look at it in
iwl_mvm_channel_switch_rx_beacon. This is fine, since we reset it when
starting a new CSA.
2. There is no more early return in case of csa_failed. This is fine,
since before this patch csa_failed was set only for GO, and for GO the
function is only resetting the power settings, which we want to restore
even in case of failure.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.b023856bdf39.I4ed0149e0018fe5e1ae3c2a1cbc614954016063f@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We send some data to the firmware and expect to get it back,
but we shouldn't really trust the firmware on this. Check the
size of all the data we send down to avoid using bad or just
uninitialized data when the firmware doesn't respond right.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a5a8173f16c7.I4fa68bb2b1c7dcc52ddd381c4042722d27c4a34d@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't need the sequence/index/cmd_index unless we're doing
reclaim, they're not even valid in the other cases. Move the
variables and their assignments into the right if statement
and combine the two if statements into a single one as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6207fdcc91a9.Ia71e766ead7560262f4bc6ad3da6f1117c498cd6@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Use SPDX tags instead of the long copyright notices.  Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

There's a bug in the lengths - the 'old length' needs to be calculated
using the 'old' pointer, of course, likely a copy/paste mistake. Fix
this.
Reported-by: NDaniel Gabay <daniel.gabay@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Fixes: cf29c5b6 ("iwlwifi: dbg_ini: implement time point handling")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c0105ddffa74.I1ddb243053ff763c91b663748b6a593ecc3b5634@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If we get an error, no longer consider the firmware to be
in IWL_TRANS_FW_ALIVE state.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a9d01e79c1c7.Ib2deb076b392fb516a7230bac91d7ab8a9586d86@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We set this here, but don't really use it until we've
enabled interrupts. But when enabling interrupts we
always overwrite this value anyway, so remove setting
it here, mostly in order not to have some additional
code duplicated later.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.135d96297aca.Id2d26fff60b6c31202bb0a36e46948bda6a39d33@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This was mistakenly tagged with CAPA instead of API, fix it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6a9203094c1e.I658e63066b05257e78fc20bfcbcf151ba8fd7754@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This is actually wrong, the bit used here by the image loader
is BIT(1), not BIT(2). The latter will be reused by the new
reset flow soon.

However, as we never had any complaints about not printing
the IML status or not handling the IML error interrupt (and
I suspect the code handling it was incorrectly anyway) just
remove the code for it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.9a323f4a3493.Ic7aee4dbbf4be42287c338c2fa1b111473724116@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We keep the scan status per UID in scan_uid_status field when the
iwl_mvm_build_scan_cmd() function is called. If we error out after
this, e.g. due to FW restart being in progress, we're not cleaning
up properly, and can run into warnings later.

Clean up internal variables when starting fails after calling the
iwl_mvm_build_scan_cmd() function.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.970421a2f753.Id62b2da8a0ccccbb114407db82ca485d07749d39@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We're currently doing accounting on the queue sync with an
atomic variable that counts down the number of remaining
notifications that we still need.

As we've been hitting issues in this area, modify this to
track a bitmap of queues, not just the number of queues,
and print out the remaining bitmap in the warning.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.0a3fa177cd6b.I7c69ff999419368266279ec27dd618eb450908b3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

For triggering an NMI in the firmware, we should only set BIT(24)
in the corresponding register, not the entire mask that's usable
by the driver.

This currently doesn't matter because the firmware only enables
BIT(24), but we'll start using BIT(25) for other purposes with an
upcoming API change.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2f982365d085.Id09daabfd331ba9e120abcbbedd2ad6448902ed0@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If 12k A-MSDU size is requested, we will actually allocate 16k
due to page allocation. Thus, change it to actually mean 16k,
which is useful for certain sniffer use cases.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.84ae405829d4.I31184f4be31f7c3feb9a29aef3a111e70d15c64a@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This function has grown quite a bit over time, move it
out of line before we grow it even further.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1a0211e66906.I572eb69dc3738319310c9cbe03a36d942f4f68f7@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The argument type to iwl_mvm_notify_rx_queue() is currently just
a u8 *, but that's misleading because we actually need the inner
data to be of type struct iwl_mvm_internal_rxq_notif, because we
interpret it when we get it back from the device (to check the
sync bool and possibly the cookie.)

Therefore, clear up any potential confusion and require that the
data passed is of type struct iwl_mvm_internal_rxq_notif *.

Also, while at it, rename the "count" to "notif_size" as "count"
doesn't really clearly say what it's counting.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.d28e14682bdc.I9ac366aa97db045be4daa4ba263267a3ac6a6a2f@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This was a hack done to test the data path of devices that
didn't support well CSUM offload in Tx. This is not needed
anymore.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6c9fc9fb48d5.I2aaebf90e6fe81860105d049a8d35746fa8d86c2@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Validate the maximum RX descriptor length against the size
of the buffers we gave the device - if it doesn't fit then
the hardware messed up.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6378fb435cc0.Ib07485f3dc5999c74b03f21e7a808c50a05e353c@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The MPDU contained in a notification shouldn't be larger than the
notification size itself is, validate this.
Reported-by: NHaggai Abramovsky <haggai.abramovsky@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7c721ad37014.Id5746874ecfa208b60baa62691b2d9dc5dd4d89c@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Instead of enumerating all possible stations iterate only active ones.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c049de5611b4.Ic35b8d1a328903195ec7cb887a9cb198b7d8f856@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The comments about the NVM offsets were inaccurate. Fix
the enum so that the right values appear under the right
comment.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6fcf16392341.Ie882e66085901357484c9e272a73602248c7e69f@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Change "anntena" to "antenna" in a comment in stats.h.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.abca200b24d6.If5ce9e8abd5034496e98e97a53c446f045438388@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The new inclusive terminology requires to change a few
terms that were used in iwlwifi.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Similarly to what I did to iwl_run_init_mvm_ucode, there is no
need to pass the read_nvm parameter. Either we have an NVM
and we don't need to read it, or we don't and we need to read it.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1b764faecfee.I2da0ada577fc16268125a4a15b5e725c18c643ee@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Curretly we only mark HW error state "after" trying to collect HW data,
but if any HW error happens while colleting HW data we go into endless
loop. avoid this by setting HW error state "before" collecting HW data.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4c7e5a87da15.Ic35b2f28ff08f7ac23143c80f224d52eb97a0454@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This is used for BT node and for any user that wants to
control what events would be send from FW to the driver.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a9dba2daca59.I2b18bccf0d409f1517c3e2841b667014f9dafc24@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add support to the 6GHz band (aka. Ultra High Band or UHB).  This
allows us to scan and connect to channels in that band, including all
the relevant features, such as preferred scan channels, colocated
channels etc.
Co-developed-by: NHaim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com>
Co-developed-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Co-developed-by: NTova Mussai <tova.mussai@intel.com>
Signed-off-by: NTova Mussai <tova.mussai@intel.com>
Co-developed-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Co-developed-by: NTali Levi Rovinsky <Tali.Levi-rovinsky@intel.com>
Signed-off-by: NTali Levi Rovinsky <Tali.Levi-rovinsky@intel.com>
Co-developed-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Co-developed-by: NAyala Beker <ayala.beker@intel.com>
Signed-off-by: NAyala Beker <ayala.beker@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This data is not necessarily the same across devices as we may
modify it due to the number of antennas and for overrides (though
in practice overrides are likely to be identical), so modifying
the global data is wrong.

Make a copy of it in the NVM data and modify it there instead.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6b4ee30c59e4.I0c30ef78b3bf727fe80b16a19c7588016d6b04bf@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We no longer need code that was introduced to differentiate
between two early versions of 8260.

We can remove this convoluted way to get the hardware version
that was needed because of a bug in the register's
configuration.

Moreover, since we no longer need to access the PRPH
registers, we no longer need to wake up the device,
request ownership, etc...
Remove all that.

This allows us to get the rid of the obsolete comment
about the AUX bus MISC address space which should have
been moved when this code was moved away from here.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4a5665ccd8a6.Iff3879405c15758ba661c430e77dc2160ddada1c@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If we already read the NVM, we don't need to read it again.
Make sure that this is the case with a WARNING.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.8e0ffce7f873.Ie526042c4d4b93d9116c90f53180cbadef0b32cb@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If case we have an error reading FW memory we get garbage (stack old
data) in the report, so just initialize the table to zero.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.742786ffddba.Id7a17985f5bf6a03d3850f445ccdc611f97776ce@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This command should be used only when there's a real client station.
Currently it works, but since soon the driver will stop actually having
an auxiliary station by default, and this command requires _some_ valid
station, it needs to be removed from this flow.
Signed-off-by: NNaftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.81b2acfe292b.I8c7372e6f72279e22966a2d0a9066521f9d2f1a0@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>