The logical place for these functions is in i915_irq.c next to the rest of
PM interrupt handling functions.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The helpers to enable/disable PM IRQs for GEN6 and GEN8 are the same
except for the PM interrupt mask register, so abstract away this
register in the GEN6 versions and use these everywhere.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This simplifies the code quite a bit compared to iterating over all
rings during the ring interrupt.

Also, it allows us to drop the mmio_flip spinlock, since the mmio_flip
struct is only accessed in two places. The first is when the flip is
queued and the other when the mmio writes are done. Since a flip cannot
be queued while there is a pending flip, the two paths shouldn't ever
run in parallel. We might need to revisit that if support for replacing
flips is implemented though.

v2: Don't hold dev->struct_mutext while waiting (Chris)

v3: Make the wait uninterruptable (Chris)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Don't check DDB on pre-SKL platforms
    Don't check DDB state on disabled pipes

v3: Squash "Expose skl_ddb_get_hw_state()"
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch provides the implementation for reading the pipe wm HW
state.

v2: Incorporated Damien's review comments and also made modifications
    to incorporate the plane/cursor split.

v3: No need to ident a line that was fitting 80 chars
    Return early instead of indenting the remaining of a function
    (Damien)

v4: Rebase on top of nightly (minor conflict in intel_drv.h)
v5: Rebase on top of nightly (minor conflict in intel_drv.h)
v6: Rebase on top of nightly (minor conflict in intel_drv.h)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch defines the structures needed for computation of
watermarks of pipes and planes for SKL.

v2: Incorporated Damien's review comments and removed unused fields
    in structs for future features like rotation, drrs and scaling.
    The skl_wm_values struct is now made more generic across planes
    and cursor planes for all pipes.

v3: implemented the plane/cursor split.

v4: Change the wm union back to a structure (Ville, Daniel)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we program just DPSCNTR and DSPSTRIDE directly from the ring
interrupt handler, which is fine since the hardware guarantees that
those are update atomically. When we have atomic page flips we'll want
to be able to update also the offset registers, and then we need to use
the vblank evade mechanism to guarantee atomicity. Since that mechanism
introduces a wait, we need to do the actual register write from a work
when it is triggered by the ring interrupt.

v2: Explain the need for mmio_flip.work in the commit message (Paulo)
    Initialize the mmio_flip work in intel_crtc_init() (Paulo)
    Prevent new flips the previous flip work finishes (Paulo)
    Don't acquire modeset locks for mmio flip work

Note: Paulo had reservations about the work item leaking over a plane
disable. But insofar as we do lack these checks that issue is already
present with the existing code.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It will help future code if this function knows something about of the context
of the display setup object is being pinned for.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The function was removed in:

  commit 0e32b39c
  Author: Dave Airlie <airlied@redhat.com>
  Date:   Fri May 2 14:02:48 2014 +1000

      drm/i915: add DP 1.2 MST support (v0.7)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As Paulo said when introducing the enum, having more types is really
good to document what should go where (int foo(int, int, bool, bool).

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we suspend we turn everything off so the pps should be idle, and we
also (or at least should) disable all power wells which will reset the
power sequencer port assignment. So when we resume all power sequencers
should be in their reset state. However it's at least theoretically
possible that the BIOS would touch the power seuqencer(s), so to be safe
we ought to read out the current port assignment like we do at driver
init time.

To do that we can simply call vlv_initial_power_sequencer_setup() from
the encoder ->reset() hook before calling intel_edp_panel_vdd_sanitize().
There's no danger or clobbering the pps delays since we now have those
stored within intel_dp and we don't change them once initialized.

This will make sure that the vdd state gets correctly tracked post-resume
in case the BIOS enabled it.

We need to shuffle things around a bit to get the locking right, and
while at it, make intel_edp_panel_vdd_sanitize() static and move it
around a bit to avoid a forward declaration.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Introduce functions to enable/disable the audio codec, incorporating the
ELD setup within enable. The disable is initially limited to HSW,
covering exactly what was done previously.

The only functional difference is that ELD valid is no longer set if
there is no connector with ELD, which should be the right thing to do
anyway. Otherwise the sequence remains the same, with warts and all, in
preparation for applying more sanity.

v2: add kernel doc.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power seqeuencer kick procedure requires the DPLL to be running
in order to complete successfully. In case the DPLL isn't currently
running when we need to kick the power seqeuncer enable it
temporarily. This can happen eg. during ->detect() when the pipe is
not already active.

To avoid needlessly duplicating the DPLL programming re-use the already
existing functions by passing a temporary pipe config to them instead
of having them consult the current pipe config at crtc->config.

v2: Introduce vlv_force_pll_{on,off}() (Daniel)
v3: Rebase due to drm_crtc vs. intel_crtc changes
    Fix a typo in commit msg (checkpatch)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v1)
[danvet: Appease checkpatch.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power seqeuncer delays are fixed for a given panel, so we can keep
them around once computed.

Not that on VLV/CHV we still re-compute them every time we initialize
the power seqeuncer registers, but that will change soon enough.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because I got annoyed that I had to document what values "int
ddi_personality" is supposed to hold.

A good side-effect of this change is that now the compilers can do
some additional checks on our code, which may prevent some bugs in the
future. A bad side-effect of this change is that now the compilers do
some additional checks on our code and complain when a switch
statement doesn't check for all possible values, so we need to add
"default" cases to all those switches. Hopefully, this may help
preventing confusions against DRM_MODE_CONNECTOR_* and
DRM_MODE_ENCODER_*.

I guess that just by looking at the patch, some people will think this
change is not worth its benefits. In this case, I don't really mind
dropping the patch.

Also, there's probably still a few more places where we can
s/int/enum intel_output_type/, but we can change that later, when we
spot the places.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Resolve conflict due to reordered patches.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Everything else can be derived from that. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In preparation for some additional cleanup. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This simplifies the code in the vlv irq handler. Also this now
means that we correctly filter underruns on gen2-4.

And as the real upshot I need to document one less function for
the fifo underrun code.

v2: Shorten one long line.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Way too much copypasta all over. And this also clarifies a bit what's
going on since it separates the "do we have an underrun irq" from the
"should we report the underrun" check.

v2: Fix excessively long lines.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

It's the new rule!
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prep work for some nice documentation. Requires that we export the
display irq enable/disable functions on ilk/ibx. But we already export
them for vlv/i915. So not more inconsistency.

v2: Rebase on top of skl stage 1.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Move the duplicated DIV_ROUND_CLOSEST_ULL macro into the intel_drv.h
header file so that it can be shared between intel_display.c
and intel_panel.c.
Signed-off-by: NU. Artie Eoff <ullysses.a.eoff@intel.com>
Reviewed-By: NJoe Konno <joe.konno@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's the new world order!

Not going full monty on these here and rolling this out throughout the
subsequent call chains since this is just for the kerneldoc. Later on
we can go more crazy, especially once we've embedded drm_device
correctly.

v2: Also frob the runtime_pm functions ...
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Double negations just parse harder. Also this allows us to ditch some
init code since clearing to 0 dtrt. Also ditch the assignment in
intel_pm_setup, that's not redundant since we do the assignement now
while setting up interrupts.

While at it do engage in a bit of OCD and wrap up the few lines of
setup/teardown code into little helper functions: intel_irq_fini for
cleanup and intel_irq_init_hw for hw setup.

v2: Use _install/_uninstall for the new wrapper function names as
Paulo suggested.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allows us to mark it static and so forgoe the kerneldoc for it.

Note that intel_power_domains_fini is also called from failure paths
in the driver load sequence. But the call to runtime_pm_disable for
that is harmless since by default runtime pm is already disabled.

v2: Augment the commit message as discussed with Imre on irc.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've decided to not move intel_display_port_power_domain because
that's just a hack in our design ...
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- fini goes with init, so call it intel_power_domains_fini. While
  at it shovel some of the fini code that leaked out of it back in.

- give power_enabled functions the verb _is_ to make the meaning clearer.
  Also use a __ prefix instead of _unlocked to really discourage users.

- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Geez is the audio hack ugly.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Rebased on top of the skl patches.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Oh well.

v2: Fix one more spelling fail Paulo spotted.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It can be handy to get the number of planes for this pipe, ie including
the primary plane to loop over them. Introduce a little function to do
so.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I shouldn't ask everyone to do this and fail myself ...

This extracts all the frontbuffer tracking functions into
intel_frontbuffer.c, adds a DOC overview section and also adds the
missing kerneldoc for i915_gem_track_fb and also pulls it into the
same section for convenience.

v2: Don't forget about the header files.

v3: Oops, might check compilation next time around. To make my life
easier drop the increase_pllclock from set_base_atomic since really,
it doesn't matter if you see your Oops or kgdb with a tiny bit of lag.

v4: Try to better explain how to actually use this, requested by Paulo
on irc.

v5: Explain invalidate/flush a bit clearer.

v6: s/business/busyness/
Acked-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Requested by Chris, and also requested to keep it since it's a
more accurate name in his opinion.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This new struct will be the storage of src and dst coordinates
between the check and commit stages of a plane update.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Long ago, back in the racy haydays of 915gm interrupt handling, page
flips would occasionally go astray and leave the hardware stuck, and the
display not updating. This annoyed people who relied on their systems
being able to display continuously updating information 24/7, and so
some code to detect when the driver missed the page flip completion
signal was added. Until recently, it was presumed that the interrupt
handling was now flawless, but once again Simon Farnsworth has found a
system whose display will stall. Reinstate the pageflip stall detection,
which works by checking to see if the hardware has been updated to the
new framebuffer address following each vblank. If the hardware is
scanning out from the new framebuffer, but we still think the flip is
pending, then we kick our driver into submision.

This is a continuation of the effort started with
commit 4e5359cd
Author: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Date:   Wed Sep 1 17:47:52 2010 +0100

    drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt

This now includes a belt-and-braces approach to make sure the driver
(or the hardware) doesn't miss an interrupt and cause us to stop
updating the display should the unthinkable happen and the pageflip fail - i.e.
that the user is able to continue submitting flips.

v2: Cleanup, refactor, and rename
v3: Only start counting vblanks after the flip command has been seen by
    the hardware.
v4: Record the seqno after we touch the ring, or else there may be no
    seqno allocated yet.
v5: Rebase on mmio-flip.
v6: Rebase, rebase.
Reported-by: NSimon Farnsworth <simon@farnz.org.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75502Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [v4]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power sequencer loses its state when the disp2d power well is down.
Clear the dev_priv->pps_pipe tracking so that the power sequencer state
gets reinitialized the next time it's needed.

v2: Fix the pps_mutex vs. power_domain mutex deadlock by taking power
    domain reference first
v3: Rename from edp_pps_(un)lock() to just pps_(un)lock() for the future,
    update due to backlight code changes
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV/CHV have a per-pipe panel power sequencer which locks onto the
port once used. We need to keep track wich power sequencers are
locked to which ports.

v2: remove spurious whitespace change, rebase due to backlight changes (Imre)
Reviewed-by: NAntti Koskipaa <antti.koskipaa@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Break some really long lines to appease checkpatch a bit.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we may query the edid multiple times following a detect, record the
EDID found during output discovery and reuse it. This is a separate
issue from caching the output EDID across detection cycles.

v2: Implement connector->force() callback so that edid is associated
with the connector for user overrides as well (Ville)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just pass the intel_crtc around instead of dev_priv+pipe.

Also make intel_wait_for_pipe_off() static since it's only used in
intel_display.c.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NThomas Richter <richter@rus.uni-stuttgart.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This gets us out of our init code and out to userspace quite a bit
faster, but does open us up to some bugs given the state of our init
time locking.

v2: switch to async_schedule (Chris)
    check with lockdep, seems happy (Jesse)
    move hotplug enable flag set to fbdev_initial_config (Jesse)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebase on top of the dev_priv->enable_hotplug_processing
removal.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make backlight class sysfs bl_power a sub-state of backlight enabled, if
a backlight power connector callback is defined. It's up to the
connector callback to handle the sub-state, typically in a way that
respects panel power sequencing.

v2: Post the version that does not oops. *facepalm*.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Tested_by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>