When the system resumes, it will first call system resume and
then runtime suspend (if CONFIG_RUNTIME_PM is enabled).
There is no need to conditionally power on the device in
system resume, so always power it on and leave runtime
suspend to power it off if needed.
Suggested-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This chip allows some limited number of sensors connected to it as
slaves, which can be directly accessed by register interface of this
driver.But the current upstream driver doesn't support such mode.
To attach such slaves to main processor i2c bus, chip has to be set
up in bypass mode. This change adds i2c mux, which will enable/disable
this mode for transaction to/from such slave devices.
This was discussed for a while in mailing list, this was the outcome:
Reference:
http://www.spinics.net/lists/linux-iio/msg12126.html
http://comments.gmane.org/gmane.linux.kernel.iio/11470Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This version of the code avoids extra memory copy operations and is
somewhat smaller in code size.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Acked-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

sizeof(u8) is always 1.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add 2 new definition entries to support ak0991x compass.
Add a more advanced function to check we are dealing with the
expected device.
Remove standalone driver for ak09911.
Signed-off-by: NGwendal Grignou <gwendal@chromium.org>
Tested-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

For each type of compass supported (AK8975 and AK8963),
add a definition structure for register masks, important registers,
raw data interpretation.
This change will make integrating new type of devices easier.

Remove i2c register cache. It is only used for one single register.
Signed-off-by: NGwendal Grignou <gwendal@chromium.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fixes code duplication, return of function.
Check client->irq properly when setting up optional irq handler.
Signed-off-by: NGwendal Grignou <gwendal@chromium.org>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fixes:
drivers/staging/iio/adc/ad7192.c:615: ERROR: space prohibited before that ','
drivers/staging/iio/meter/ade7759.c:119: ERROR: space prohibited before that ','
Signed-off-by: NZachary Warren <conflatulence@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We have the following testing scenario:

$ insmod iio_dummy_evgen.ko
$ insmod iio_dummy.ko

./iio_event_monitor /dev/iio:device0
Event: time: 1412786467971335337, type: activity(running), channel: 0,
evtype: thresh, direction: rising
Event: time: 1412786530792974091, type: activity(walking), channel: 0,
evtype: thresh, direction: falling
Event: time: 1412764319184761765, type: steps, channel: 0, evtype: instance

$ echo 1 > /sys/bus/iio/devices/iio_evgen/poke_ev0
$ echo 2 > /sys/bus/iio/devices/iio_evgen/poke_ev0
$ echo 3 > /sys/bus/iio/devices/iio_evgen/poke_ev0
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Adds support for the new channel types in the dummy driver:
  * a new channel IIO_ACTIVITY
  * two state transition events (running and walking)
  * a new channel IIO_STEPS and support for reading and writing
    pedometer step counter
  * step detect event
  * a new IIO_CHAN_INFO_CALIBHEIGHT mask bit for reading and writing
    user's height.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some devices need the height of the user to compute various
parameters. One of this devices is Freescale's MMA9553L
(http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf)
that needs the height of the user to compute the stride length which
is used further to determine distance, speed and activity type.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

These changes are needed to support the functionality of a pedometer.
A pedometer has two basic functionalities: step counter and step detector.

The step counter needs to be enabled and then it will count the steps
in its hardware register. Whenever the application needs to check
the step count, it will read the step counter register. To support the
step counter a new channel type STEPS is added. Since the pedometer needs
to be enabled first so that the hardware can count and store the steps,
we need a specific ENABLE channel info mask.

The step detector will generate an interrupt each time a step is detected.
To support this functionality we add a new event type INSTANCE.

For more information on the Android requirements for step counter and step
detector see:
http://source.android.com/devices/sensors/composite_sensors.html#counter
and http://source.android.com/devices/sensors/composite_sensors.html#detector.

A device that has the pedometer functionality this interface needs to
support is Freescale's MMA9553L:
http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdfSigned-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

For some events (e.g.: step detector) a direction does not make sense.

Add IIO_EV_DIR_NONE to be used with such events and generate sysfs event
attributes that do not contain direction.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This channel will be used for exposing information about
activity composite sensors. Activities supported so far:
	* running
	* jogging
	* walking
	* still

THRESHOLD event is used to signal a change in the activity
state.

We associate a confidence interval for each activity expressed
as a percentage from 0 to 100.
  * 0, means the sensor IS NOT reporting that activity.
  * 100, means the sensor IS reporting that activity.

Users of this interface have two possible means to gather
information about the ongoing activities.

1. Event based, via event file descriptor
  * sensor may report an event when ENTERING an activity or LEAVING
    an activity based on a threshold value.
  * drivers will wake up applications waiting data on the event fd

2. Polling, by reading the sysfs associated attribute files:
  * /sys/bus/iio/devices/iio:device0/in_activity_running_input
expressed as percentage confidence value from 0 to 100.

This will offer an interface for Android significant motion
composite sensor defined here:
http://source.android.com/devices/sensors/composite_sensors.html

Activities listed above are supported by Freescale's MMA9553 sensor:
http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdfSigned-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We need a way to store events generated by iio_dummy_evgen module,
in order to correctly process IRQs in iio_simple_dummy_events.

For the moment, we add two registers:

* id_reg  - ID register, stores the source of the event
* id_data - DATA register, stores the type of the event

e.g echo 4 > /sys/bus/iio/devices/iio_evgen/poke2

id_reg 0x02, id_data 0x04

This means, event of type 4 was generated by fake device 2.

We currently use a hardcoded mapping of virtual events to IIO events.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports
raw accel/magn readings together with scale and sampling frequency.

Datasheet will be available at:
http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Files under include/linux/iio were not reported as part
of the IIO subsystem.
Reported-by: NCristina Ciocan <cristina.ciocan@intel.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Onda v975w tablet contains an accelerometer that's advertised over
ACPI as SMO8500. This device is however a KXCJ9 accelerometer as
can be seen in the Windows driver's INF file, and from the etching on
the chipset ("KXCJ9 41566 0414").

This patch also removes the attempt to get the IRQ for the "data ready"
signal, as it does not seem to be supported by this device on this
platform.
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds a new driver for solteam opto JSA1212 proximity and
ambient light sensor.

Basic details of the chip can be found here.

http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_AiActualScan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

The function v_APCI3120_InterruptDmaMoveBlock16bit() is then just a wrapper
for comedi_buf_write_samples(). Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.

Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.

Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to '0' but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'ntrig' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'stopcount' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a new member to comedi_async to count the number of scans completed.
This member is cleared by comedi_buf_reset() along with the other comedi_async
members. It is incremented in comedi_inc_scan_progress() when the end of scan
is detected.

This member will be used to clean up the scan counting in the comedi drivers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the implementation of a single-open policy for both
devices (lcd and keypad) by using atomic_t instead of plain ints.
Signed-off-by: NMariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Wake queue in the dwIsr loop of device_intr instead of device_tx_srv.

This fixes an issue when ISR_TXDMA0 or ISR_AC0DMA does not occur
device_tx_srv is not called and the queue gets stuck in stopped
condition.

On test if the queue is stuck another MACvTransmitAC0 or MACvTransmit0
in vnt_tx_packet will clear it.

Check on vif that both buffers are available and the queue is stopped.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux already includes a copy of the GPL, checkpatch compains about the address.
Remove it from the license text.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>