- 25 5月, 2013 9 次提交
-
-
由 Xiao Guangrong 提交于
Commit 751efd86 ("mmu_notifier_unregister NULL Pointer deref and multiple ->release()") breaks the fix 3ad3d901 ("mm: mmu_notifier: fix freed page still mapped in secondary MMU"). Since hlist_for_each_entry_rcu() is changed now, we can not revert that patch directly, so this patch reverts the commit and simply fix the bug spotted by that patch This bug spotted by commit 751efd86 is: There is a race condition between mmu_notifier_unregister() and __mmu_notifier_release(). Assume two tasks, one calling mmu_notifier_unregister() as a result of a filp_close() ->flush() callout (task A), and the other calling mmu_notifier_release() from an mmput() (task B). A B t1 srcu_read_lock() t2 if (!hlist_unhashed()) t3 srcu_read_unlock() t4 srcu_read_lock() t5 hlist_del_init_rcu() t6 synchronize_srcu() t7 srcu_read_unlock() t8 hlist_del_rcu() <--- NULL pointer deref. This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu. The another issue spotted in the commit is "multiple ->release() callouts", we needn't care it too much because it is really rare (e.g, can not happen on kvm since mmu-notify is unregistered after exit_mmap()) and the later call of multiple ->release should be fast since all the pages have already been released by the first call. Anyway, this issue should be fixed in a separate patch. -stable suggestions: Any version that has commit 751efd86 need to be backported. I find the oldest version has this commit is 3.0-stable. [akpm@linux-foundation.org: tweak comments] Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Tested-by: NRobin Holt <holt@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Imre Deak 提交于
Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133Signed-off-by: NImre Deak <imre.deak@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJens Axboe <axboe@kernel.dk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Jones <davej@redhat.com> Cc: Lukas Czerner <lczerner@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 OGAWA Hirofumi 提交于
Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by: NKrzysztof Strasburger <strasbur@chkw386.ch.pwr.wroc.pl> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Update RapidIO documentation to reflect changes made to enumeration/discovery build configuration and user space triggering mechanism. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gernot Vormayr 提交于
If the port number is missing from the device-tree the device gets named xs` instead of xsa. This fixes the check for missing ids. Tested on ml507 board. Signed-off-by: NGernot Vormayr <gvormayr@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Masami Hiramatsu fixed another bug. This time returning a proper result in event_enable_func(). After checking the return status of try_module_get(), it returned the status of try_module_get(). But try_module_get() returns 0 on failure, which is success for event_enable_func()" * tag 'trace-fixes-v3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Return -EBUSY when event_enable_func() fails to get module
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fix from Steve French: "One cifs fix to merge now - fixes possible DFS oops (I expect to request a merge of 4 additional cifs fixes next week)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: only set ops for inodes in I_NEW state
-
- 24 5月, 2013 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull gfs2 fixes from Steven Whitehouse: "This time there are just four fixes. There are a couple of minor updates to the quota code, a fix for KConfig to ensure that only valid combinations including GFS2 can be built, and a fix for a typo affecting end i/o processing when writing the journal. Also, there is a temporary fix for a performance regression relating to block reservations and directories. A longer fix will be applied in due course, but this deals with the most immediate problem for now" * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Fix typo in gfs2_log_end_write loop GFS2: fix DLM depends to fix build errors GFS2: Use single-block reservations for directories GFS2: two minor quota fixups
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "Some more P8 related bits, a bunch of fixes for our P7+/P8 HW crypto drivers, some added workarounds for those radeons that don't do proper 64-bit MSIs and a couple of other trivialities by myself." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support powerpc/powernv: Build a zImage.epapr powerpc: Make radeon 32-bit MSI quirk work on powernv powerpc: Context switch more PMU related SPRs powerpc/powernv: Fix condition for when to invalidate the TCE cache powerpc/pci: Fix bogus message at boot about empty memory resources powerpc: Fix TLB cleanup at boot on POWER8 drivers/crypto/nx: Fixes for multiple races and issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "It's been a while since my last pull request so quite a few fixes have piled up." Indeed. 1) Fix nf_{log,queue} compilation with PROC_FS disabled, from Pablo Neira Ayuso. 2) Fix data corruption on some tg3 chips with TSO enabled, from Michael Chan. 3) Fix double insertion of VLAN tags in be2net driver, from Sarveshwar Bandi. 4) Don't have TCP's MD5 support pass > PAGE_SIZE page offsets in scatter-gather entries into the crypto layer, the crypto layer can't handle that. From Eric Dumazet. 5) Fix lockdep splat in 802.1Q MRP code, also from Eric Dumazet. 6) Fix OOPS in netfilter log module when called from conntrack, from Hans Schillstrom. 7) FEC driver needs to use netif_tx_{lock,unlock}_bh() rather than the non-BH disabling variants. From Fabio Estevam. 8) TCP GSO can generate out-of-order packets, fix from Eric Dumazet. 9) vxlan driver doesn't update 'used' field of fdb entries when it should, from Sridhar Samudrala. 10) ipv6 should use kzalloc() to allocate inet6 socket cork options, otherwise we can OOPS in ip6_cork_release(). From Eric Dumazet. 11) Fix races in bonding set mode, from Nikolay Aleksandrov. 12) Fix checksum generation regression added by "r8169: fix 8168evl frame padding.", from Francois Romieu. 13) ip_gre can look at stale SKB data pointer, fix from Eric Dumazet. 14) Fix checksum handling when GSO is enabled in bnx2x driver with certain chips, from Yuval Mintz. 15) Fix double free in batman-adv, from Martin Hundebøll. 16) Fix device startup synchronization with firmware in tg3 driver, from Nithin Sujit. 17) perf networking dropmonitor doesn't work at all due to mixed up trace parameter ordering, from Ben Hutchings. 18) Fix proportional rate reduction handling in tcp_ack(), from Nandita Dukkipati. 19) IPSEC layer doesn't return an error when a valid state is detected, causing an OOPS. Fix from Timo Teräs. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) be2net: bug fix on returning an invalid nic descriptor tcp: xps: fix reordering issues net: Revert unused variable changes. xfrm: properly handle invalid states as an error virtio_net: enable napi for all possible queues during open tcp: bug fix in proportional rate reduction. net: ethernet: sun: drop unused variable net: ethernet: korina: drop unused variable net: ethernet: apple: drop unused variable qmi_wwan: Added support for Cinterion's PLxx WWAN Interface perf: net_dropmonitor: Remove progress indicator perf: net_dropmonitor: Use bisection in symbol lookup perf: net_dropmonitor: Do not assume ordering of dictionaries perf: net_dropmonitor: Fix symbol-relative addresses perf: net_dropmonitor: Fix trace parameter order net: fec: use a more proper compatible string for MVF type device qlcnic: Fix updating netdev->features qlcnic: remove netdev->trans_start updates within the driver qlcnic: Return proper error codes from probe failure paths tg3: Update version to 3.132 ...
-
由 Steven Whitehouse 提交于
There was a missing _all in this loop iterator Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Randy Dunlap 提交于
Fix build errors by correcting DLM dependencies in GFS2. Build errors happen when CONFIG_GFS2_FS_LOCKING_DLM=y and CONFIG_DLM=m: fs/built-in.o: In function `gfs2_lock': file.c:(.text+0xc7abd): undefined reference to `dlm_posix_get' file.c:(.text+0xc7ad0): undefined reference to `dlm_posix_unlock' file.c:(.text+0xc7ad9): undefined reference to `dlm_posix_lock' fs/built-in.o: In function `gdlm_unmount': lock_dlm.c:(.text+0xd6e5b): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `sync_unlock': lock_dlm.c:(.text+0xd6e9e): undefined reference to `dlm_unlock' fs/built-in.o: In function `sync_lock': lock_dlm.c:(.text+0xd6fb6): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_put_lock': lock_dlm.c:(.text+0xd7238): undefined reference to `dlm_unlock' fs/built-in.o: In function `gdlm_mount': lock_dlm.c:(.text+0xd753e): undefined reference to `dlm_new_lockspace' lock_dlm.c:(.text+0xd79d3): undefined reference to `dlm_release_lockspace' fs/built-in.o: In function `gdlm_lock': lock_dlm.c:(.text+0xd8179): undefined reference to `dlm_lock' fs/built-in.o: In function `gdlm_cancel': lock_dlm.c:(.text+0xd6b22): undefined reference to `dlm_unlock' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch changes the multi-block allocation code, such that directory inodes only get a single block reserved in the bitmap. That way, the bitmaps are more tightly packed together, and there are fewer spans of free blocks for in-use block reservations. This means it takes less time to find a free span of blocks in the bitmap, which speeds things up. This increases the performance of some workloads by almost 2X. In Nate's mockup.py script (which does (1) create dir, (2) create dir in dir, (3) create file in that dir) the test executes in 23 steps rather than 43 steps, a 47% performance improvement. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch fixes two regression problems that Abhi found in the GFS2 quota code. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Brian King 提交于
Recent commit e61133dd added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
In commit 9353374b "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kent Yoder 提交于
Fixes a race on driver init with registering algorithms where the driver status flag wasn't being set before self testing started. Added the cra_alignmask field for CBC and ECB modes. Fixed a bug in GCM where AES block size was being used instead of authsize. Removed use of blkcipher_walk routines for scatterlist processing. Corner cases in the code prevent us from processing an entire scatterlist at a time and walking the buffers in block sized chunks turns out to be unecessary anyway. Fixed off-by-one error in saving off extra data in the sha code. Fixed accounting error for number of bytes processed in the sha code. Signed-off-by: NKent Yoder <key@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Wei Yang 提交于
In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: NGavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit 3853b584 ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: - An OMAP fix that makes ethernet work again. - Fix for build problem when building the MCP23S08 driver as module. - IRQ conflicts in the Langwell driver. - Fix IRQ coherency issues in the MXS driver. - Return correct errorcode on errorpath when removing GPIO chips. * tag 'gpio-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Don't override the error code in probe error handling gpio: mxs: Use set and clear capabilities of the gpio controller gpio-langwell: fix irq conflicts when DT is not used gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m gpio/omap: ensure gpio context is initialised
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "Here are some more fixes for v3.10. The Moorestown update broke Intel Medfield devices, so I reverted it. The acpiphp change fixes a regression: we broke hotplug notifications to host bridges when we split acpiphp into the host-bridge related part and the endpoint-related part. Moorestown Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" Hotplug PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check" * tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "A few fixups to Wacom and eGalax touchscreen driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add an eraser to DTH2242/DTK2241 Input: wacom - add a few new styli for Cintiq series Input: wacom - add three new display tablets Input: egalax_ts - ABS_MT_POSITION_Y not reported well
-
由 David S. Miller 提交于
This reverts commits: c573972c 1a590434 da2e2c21 They were meant for net-next not net. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg Kroah-Hartman: "Here are some tty / serial driver fixes for 3.10-rc2. Nothing huge, although the rocket driver fix looks large, it's just moving the code around to fix the reported build issues in it. Other than that, this has the fix for the of-reported lockdep warning from the vt layer, as well as some other needed bugfixes. All of these have been in linux-next for a while" * tag 'tty-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: mxser: Fix build warning introduced by dfc7b837 (Re: linux-next: build warning after merge of the tty.current tree) tty: mxser: fix usage of opmode_ioaddr serial: 8250_dw: add ACPI ID for Intel BayTrail TTY: Fix tty miss restart after we turn off flow-control tty/vt: Fix vc_deallocate() lock order TTY: ehv_bytechan: add missing platform_driver_unregister() when module exit TTY: rocket, fix more no-PCI warnings serial: mcf: missing uart_unregister_driver() on error in mcf_init() tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init() serial: samsung: add missing platform_driver_unregister() when module exit serial: pl011: protect attribute read from NULL platform data struct tty: nwpserial: Pass correct pointer to free_irq() serial: 8250_dw: Add valid clk pointer check
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg Kroah-Hartman: "Here are some staging tree driver fixes for 3.10-rc2 The drivers/iio/ changes are here as they are still tied into drivers/staging/iio/. Nothing major, just a number of small bugfixes, and a larger documentation update for the ramster code." * tag 'staging-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits) staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS iio: exynos_adc: fix wrong structure extration in suspend and resume iio:common:st: added disable function after read info raw data iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m staging:iio:light:tsl2x7x: fix the error handling in tsl2x7x_probe() staging/iio/mxs-lradc: fix preenable for multiple buffers staging: imx-drm: imx-tve: Check the return value of 'regulator_enable()' staging: video: imx: Select VIDEOMODE_HELPERS for parallel display staging: ramster: add how-to document staging: dwc2: Fix dma-enabled platform devices using a default dma_mask staging: vt6656: [bug] Fix missing spin lock in iwctl_siwpower. staging: Swap zram and zsmalloc in Kconfig staging: android: logger: use kuid_t instead of uid_t staging: zcache: Fix incorrect module_param_array types staging/solo6x10: depend on CONFIG_FONTS staging/drm: imx: add missing dependencies staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning staging: sep: fix driver build and kconfig staging: nvec: cleanup childs on remove staging: nvec: implement unregistering of notifiers ...
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are 3 tiny driver core fixes for 3.10-rc2. A needed symbol export, a change to make it easier to track down offending sysfs files with incorrect attributes, and a klist bugfix. All have been in linux-next for a while" * tag 'driver-core-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: klist: del waiter from klist_remove_waiters before wakeup waitting process driver core: print sysfs attribute name when warning about bogus permissions driver core: export subsys_virtual_register
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are some small char/misc driver fixes for 3.10-rc2. Nothing major here, just a number of fixes for things that people have reported, and a MAINTAINERS update for the recent changes for the hyperv files that went into 3.10-rc1." * tag 'char-misc-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ttyprintk: Fix NULL pointer deref by setting tty_port ops after initializing port uio: UIO_DMEM_GENIRQ should depend on HAS_DMA MAINTAINERS: update Hyper-V file list mei: bus: Reset event_cb when disabling a device Drivers: hv: Fix a bug in get_vp_index() mei: fix out of array access to me clients array Char: lp, protect LPGETSTATUS with port_mutex dummy-irq: require the user to specify an IRQ number
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm bugfixes from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock() KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API. KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry
-
由 Randy Dunlap 提交于
Fix build error io vmw_vmci.ko when CONFIG_VMWARE_VMCI=m by chaning iovec.o from lib-y to obj-y. ERROR: "memcpy_toiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! ERROR: "memcpy_fromiovec" [drivers/misc/vmw_vmci/vmw_vmci.ko] undefined! Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ping Cheng 提交于
plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 5月, 2013 2 次提交
-
-
由 Timo Teräs 提交于
The error exit path needs err explicitly set. Otherwise it returns success and the only caller, xfrm_output_resume(), would oops in skb_dst(skb)->ops derefence as skb_dst(skb) is NULL. Bug introduced in commit bb65a9cb (xfrm: removes a superfluous check and add a statistic). Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
Commit 55257d72 (virtio-net: fill only rx queues which are being used) only does the napi enabling during open for curr_queue_pairs. This will break multiqueue receiving since napi of new queues were still disabled after changing the number of queues. This patch fixes this by enabling napi for all possible queues during open. Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-