stable inclusion
from stable-v5.10.104
commit dcd03efd7e8dee7a2f69bede085627fb82a9a94d
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dcd03efd7e8dee7a2f69bede085627fb82a9a94d

--------------------------------

commit a6d95c5a upstream.

This reverts commit b515d263.

Commit b515d263 ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.

The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header

However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) -  IP header - TCP header

With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.

The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/

The original problem the above commit was trying to fix is now fixed
by commit 6596a022 ("xfrm: fix MTU
regression").
Signed-off-by: NJiri Bohac <jbohac@suse.cz>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 292e1c88b8a5616ada179f1f4f14c799571217af
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=292e1c88b8a5616ada179f1f4f14c799571217af

--------------------------------

commit 4751dc99 upstream.

During log replay, whenever we need to check if a name (dentry) exists in
a directory we do searches on the subvolume tree for inode references or
or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY
keys as well, before kernel 5.17). However when during log replay we
unlink a name, through btrfs_unlink_inode(), we may not delete inode
references and dir index keys from a subvolume tree and instead just add
the deletions to the delayed inode's delayed items, which will only be
run when we commit the transaction used for log replay. This means that
after an unlink operation during log replay, if we attempt to search for
the same name during log replay, we will not see that the name was already
deleted, since the deletion is recorded only on the delayed items.

We run delayed items after every unlink operation during log replay,
except at unlink_old_inode_refs() and at add_inode_ref(). This was due
to an overlook, as delayed items should be run after evert unlink, for
the reasons stated above.

So fix those two cases.

Fixes: 0d836392 ("Btrfs: fix mount failure after fsync due to hard link recreation")
Fixes: 1f250e92 ("Btrfs: fix log replay failure after unlink and link combination")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 41712c5fa51887252b349700a286ae151d55e460
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=41712c5fa51887252b349700a286ae151d55e460

--------------------------------

commit d4aef1e1 upstream.

The commit e804861b ("btrfs: fix deadlock between quota disable and
qgroup rescan worker") by Kawasaki resolves deadlock between quota
disable and qgroup rescan worker. But also there is a deadlock case like
it. It's about enabling or disabling quota and creating or removing
qgroup. It can be reproduced in simple script below.

for i in {1..100}
do
    btrfs quota enable /mnt &
    btrfs qgroup create 1/0 /mnt &
    btrfs qgroup destroy 1/0 /mnt &
    btrfs quota disable /mnt &
done

Here's why the deadlock happens:

1) The quota rescan task is running.

2) Task A calls btrfs_quota_disable(), locks the qgroup_ioctl_lock
   mutex, and then calls btrfs_qgroup_wait_for_completion(), to wait for
   the quota rescan task to complete.

3) Task B calls btrfs_remove_qgroup() and it blocks when trying to lock
   the qgroup_ioctl_lock mutex, because it's being held by task A. At that
   point task B is holding a transaction handle for the current transaction.

4) The quota rescan task calls btrfs_commit_transaction(). This results
   in it waiting for all other tasks to release their handles on the
   transaction, but task B is blocked on the qgroup_ioctl_lock mutex
   while holding a handle on the transaction, and that mutex is being held
   by task A, which is waiting for the quota rescan task to complete,
   resulting in a deadlock between these 3 tasks.

To resolve this issue, the thread disabling quota should unlock
qgroup_ioctl_lock before waiting rescan completion. Move
btrfs_qgroup_wait_for_completion() after unlock of qgroup_ioctl_lock.

Fixes: e804861b ("btrfs: fix deadlock between quota disable and qgroup rescan worker")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NShin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: NSidong Yang <realwakka@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 6e0319e770839ab9aaee10e0e2b34edb92491831
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6e0319e770839ab9aaee10e0e2b34edb92491831

--------------------------------

commit d9947887 upstream.

When doing a full fsync, if we have prealloc extents beyond (or at) eof,
and the leaves that contain them were not modified in the current
transaction, we end up not logging them. This results in losing those
extents when we replay the log after a power failure, since the inode is
truncated to the current value of the logged i_size.

Just like for the fast fsync path, we need to always log all prealloc
extents starting at or beyond i_size. The fast fsync case was fixed in
commit 471d557a ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay") but it missed the full fsync path. The problem
exists since the very early days, when the log tree was added by
commit e02119d5 ("Btrfs: Add a write ahead tree log to optimize
synchronous operations").

Example reproducer:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt

  # Create our test file with many file extent items, so that they span
  # several leaves of metadata, even if the node/page size is 64K. Use
  # direct IO and not fsync/O_SYNC because it's both faster and it avoids
  # clearing the full sync flag from the inode - we want the fsync below
  # to trigger the slow full sync code path.
  $ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo

  # Now add two preallocated extents to our file without extending the
  # file's size. One right at i_size, and another further beyond, leaving
  # a gap between the two prealloc extents.
  $ xfs_io -c "falloc -k 16M 1M" /mnt/foo
  $ xfs_io -c "falloc -k 20M 1M" /mnt/foo

  # Make sure everything is durably persisted and the transaction is
  # committed. This makes all created extents to have a generation lower
  # than the generation of the transaction used by the next write and
  # fsync.
  sync

  # Now overwrite only the first extent, which will result in modifying
  # only the first leaf of metadata for our inode. Then fsync it. This
  # fsync will use the slow code path (inode full sync bit is set) because
  # it's the first fsync since the inode was created/loaded.
  $ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo

  # Extent list before power failure.
  $ xfs_io -c "fiemap -v" /mnt/foo
  /mnt/foo:
   EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
     0: [0..7]:          2178048..2178055     8   0x0
     1: [8..16383]:      26632..43007     16376   0x0
     2: [16384..32767]:  2156544..2172927 16384   0x0
     3: [32768..34815]:  2172928..2174975  2048 0x800
     4: [34816..40959]:  hole              6144
     5: [40960..43007]:  2174976..2177023  2048 0x801

  <power fail>

  # Mount fs again, trigger log replay.
  $ mount /dev/sdc /mnt

  # Extent list after power failure and log replay.
  $ xfs_io -c "fiemap -v" /mnt/foo
  /mnt/foo:
   EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
     0: [0..7]:          2178048..2178055     8   0x0
     1: [8..16383]:      26632..43007     16376   0x0
     2: [16384..32767]:  2156544..2172927 16384   0x1

  # The prealloc extents at file offsets 16M and 20M are missing.

So fix this by calling btrfs_log_prealloc_extents() when we are doing a
full fsync, so that we always log all prealloc extents beyond eof.

A test case for fstests will follow soon.

CC: stable@vger.kernel.org # 4.19+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 827172ffa99965fd1c43f868da64dc9e9232407f
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=827172ffa99965fd1c43f868da64dc9e9232407f

--------------------------------

commit 1d02b444 upstream.

__setup() handlers should generally return 1 to indicate that the
boot options have been handled.

Using invalid option values causes the entire kernel boot option
string to be reported as Unknown and added to init's environment
strings, polluting it.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
    kprobe_event=p,syscall_any,$arg1 trace_options=quiet
    trace_clock=jiffies", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6
     kprobe_event=p,syscall_any,$arg1
     trace_options=quiet
     trace_clock=jiffies

Return 1 from the __setup() handlers so that init's environment is not
polluted with kernel boot options.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lkml.kernel.org/r/20220303031744.32356-1-rdunlap@infradead.org

Cc: stable@vger.kernel.org
Fixes: 7bcfaf54 ("tracing: Add trace_options kernel command line parameter")
Fixes: e1e232ca ("tracing: Add trace_clock=<clock> kernel parameter")
Fixes: 970988e1 ("tracing/kprobe: Add kprobe_event= boot parameter")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NIgor Zhbanov <i.zhbanov@omprussia.ru>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 78059b1cfcd954e9c3ed6a5c3a8cd03f3b966c43
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78059b1cfcd954e9c3ed6a5c3a8cd03f3b966c43

--------------------------------

commit 1d1898f6 upstream.

When trying to add a histogram against an event with the "cpu" field, it
was impossible due to "cpu" being a keyword to key off of the running CPU.
So to fix this, it was changed to "common_cpu" to match the other generic
fields (like "common_pid"). But since some scripts used "cpu" for keying
off of the CPU (for events that did not have "cpu" as a field, which is
most of them), a backward compatibility trick was added such that if "cpu"
was used as a key, and the event did not have "cpu" as a field name, then
it would fallback and switch over to "common_cpu".

This fix has a couple of subtle bugs. One was that when switching over to
"common_cpu", it did not change the field name, it just set a flag. But
the code still found a "cpu" field. The "cpu" field is used for filtering
and is returned when the event does not have a "cpu" field.

This was found by:

  # cd /sys/kernel/tracing
  # echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger
  # cat events/sched/sched_wakeup/hist

Which showed the histogram unsorted:

{ cpu:         19, pid:       1175 } hitcount:          1
{ cpu:          6, pid:        239 } hitcount:          2
{ cpu:         23, pid:       1186 } hitcount:         14
{ cpu:         12, pid:        249 } hitcount:          2
{ cpu:          3, pid:        994 } hitcount:          5

Instead of hard coding the "cpu" checks, take advantage of the fact that
trace_event_field_field() returns a special field for "cpu" and "CPU" if
the event does not have "cpu" as a field. This special field has the
"filter_type" of "FILTER_CPU". Check that to test if the returned field is
of the CPU type instead of doing the string compare.

Also, fix the sorting bug by testing for the hist_field flag of
HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use
the special CPU field to know what compare routine to use, and since that
special field does not have a size, it returns tracing_map_cmp_none.

Cc: stable@vger.kernel.org
Fixes: 1e3bac71 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Reported-by: NDaniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 0e188fde82d7c80a6301954fbfb398ddaa8647c3
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0e188fde82d7c80a6301954fbfb398ddaa8647c3

--------------------------------

commit 327b89f0 upstream.

This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.

It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: NWilliam Mahon <wmahon@chromium.org>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeidSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit f276ea5035aafc508c4d34b121e2ddf22f131816
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f276ea5035aafc508c4d34b121e2ddf22f131816

--------------------------------

commit bfa26ba3 upstream.

Numerous keyboards are adding dictate keys which allows for text
messages to be dictated by a microphone.

This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: NWilliam Mahon <wmahon@chromium.org>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeidSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 3b8f2a7aed8005c115684c9126f816a3d4cfe2ea
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3b8f2a7aed8005c115684c9126f816a3d4cfe2ea

--------------------------------

commit ba115adf upstream.

Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it
calls devm_ioremap(). This prevents compile errors in some configs (e.g,
allyesconfig/randconfig under UML):

/usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe':
samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap'
Signed-off-by: NDavid Gow <davidgow@google.com>
Acked-by: Nanton ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20220225041727.1902850-1-davidgow@google.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit a621ae6394ce05177fa9941da1a9b465c9c47d31
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a621ae6394ce05177fa9941da1a9b465c9c47d31

--------------------------------

commit 04b7762e upstream.

Before these changes elan_suspend() would only disable the regulator
when device_may_wakeup() returns false; whereas elan_resume() would
unconditionally enable it, leading to an enable count imbalance when
device_may_wakeup() returns true.

This triggers the "WARN_ON(regulator->enable_count)" in regulator_put()
when the elan_i2c driver gets unbound, this happens e.g. with the
hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1.

Fix this by making the regulator_enable() call also be conditional
on device_may_wakeup() returning false.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.comSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 1397bbcd817f897e8a2ee8b9a026c327f9f5470e
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1397bbcd817f897e8a2ee8b9a026c327f9f5470e

--------------------------------

commit 81a36d8c upstream.

elan_disable_power() is called conditionally on suspend, where as
elan_enable_power() is always called on resume. This leads to
an imbalance in the regulator's enable count.

Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power()
in preparation of fixing this.

No functional changes intended.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com
[dtor: consolidate elan_[en|dis]able() into elan_set_power()]
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 988f4f29cc44cb2c08d667901425dd7b093fe7cc
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=988f4f29cc44cb2c08d667901425dd7b093fe7cc

--------------------------------

[ Upstream commit 10b6bb62 ]

Ido Schimmel points out that since commit 52cff74e ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.

One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
   -> dcb_ieee_setapp

If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().

Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.

Fixes: 91b0383f ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: NIdo Schimmel <idosch@idosch.org>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 6828da5dea530f4743ecdef89f90cc117dfe3cee
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6828da5dea530f4743ecdef89f90cc117dfe3cee

--------------------------------

[ Upstream commit f1ef1701 ]

Regression has been reported that suspend/resume may hang with
the previous vm ready check commit.

So bring back the evicted list check as a temp fix.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1922
Fixes: c1a66c3b ("drm/amdgpu: check vm ready by amdgpu_vm->evicting flag")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NQiang Yu <qiang.yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit f5e496ef73f307bef4d4f14edb45512d4d245954
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f5e496ef73f307bef4d4f14edb45512d4d245954

--------------------------------

[ Upstream commit 6ad27f52 ]

As there's potential for failure of the nla_memdup(),
check the return value.

Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: NJiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cnSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 64e4305a03d0c906f620b532465c3c158a7201b8
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=64e4305a03d0c906f620b532465c3c158a7201b8

--------------------------------

[ Upstream commit 45eebd62 ]

Replace state changes of iavf state machine
with a method that also tracks the previous
state the machine was on.

This change is required for further work with
refactoring init and watchdog state machines.

Tracking of previous state would help us
recover iavf after failure has occurred.
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit e6bc597fbcb20039ec84b3fdc762e368192889d6
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e6bc597fbcb20039ec84b3fdc762e368192889d6

--------------------------------

[ Upstream commit 767b9825 ]

The function pci_find_capability() in t3_prep_adapter() can fail, so its
return value should be checked.

Fixes: 4d22de3e ("Add support for the latest 1G/10G Chelsio adapter, T3")
Reported-by: NTOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 320980b2496dc781b058e56c5dd244840aa6e83a
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=320980b2496dc781b058e56c5dd244840aa6e83a

--------------------------------

[ Upstream commit 36491f2d ]

If we get a transport event, set the error and mark the init as
complete so the attempt to send crq-init or login fail sooner
rather than wait for the timeout.

Fixes: bbd669a8 ("ibmvnic: Fix completion structure initialization")
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 86027004bb9d4021f215027d981228200dc598bd
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=86027004bb9d4021f215027d981228200dc598bd

--------------------------------

[ Upstream commit 8d3b01e0 ]

Move the eDP panel on Venice 2 and Nyan boards into the corresponding
AUX bus device tree node. This allows us to avoid a nasty circular
dependency that would otherwise be created between the DPAUX and panel
nodes via the DDC/I2C phandle.

Fixes: eb481f9a ("ARM: tegra: add Acer Chromebook 13 device tree")
Fixes: 59fe02cb ("ARM: tegra: Add DTS for the nyan-blaze board")
Fixes: 40e231c7 ("ARM: tegra: Enable eDP for Venice2")
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit fbb810825aff29e8e594538e5ef3c7a2dd670f96
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fbb810825aff29e8e594538e5ef3c7a2dd670f96

--------------------------------

[ Upstream commit a222fd85 ]

As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.

Fixes: 7aa1aa6e ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: NJiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 2824f6939e2623ce1484aa39fadcdcf772d0f484
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2824f6939e2623ce1484aa39fadcdcf772d0f484

--------------------------------

[ Upstream commit b9abe942 ]

If 'devm_kstrdup()' fails, we should return -ENOMEM.

While at it, move the 'of_node_put()' call in the error handling path and
after the 'machine' has been copied.
Better safe than sorry.

Fixes: a6fc3b69 ("soc: fsl: add GUTS driver for QorIQ platforms")
Depends-on: fddacc7ff4dd ("soc: fsl: guts: Revert commit 3c0d64e8")
Suggested-by: NTyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 3afe488d5c9ce82564d6ce5f4706c2c47c652a9f
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3afe488d5c9ce82564d6ce5f4706c2c47c652a9f

--------------------------------

[ Upstream commit b113737c ]

This reverts commit 3c0d64e8
("soc: fsl: guts: reuse machine name from device tree").

A following patch will fix the missing memory allocation failure check
instead.
Suggested-by: NTyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 44709130793bb7e23c929e54b248b0b3816944d6
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=44709130793bb7e23c929e54b248b0b3816944d6

--------------------------------

[ Upstream commit 8840f546 ]

Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.

If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.

This commit fixes the same issue observed with commit 23885389
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.

Fixes: aba1ad05 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 298f6fae544f422007db3b2a17f63bcc8eeac42c
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=298f6fae544f422007db3b2a17f63bcc8eeac42c

--------------------------------

[ Upstream commit 64324ef3 ]

This patch allow lcd43 and lcd70 flavors to benefit from timer
evolution.

Fixes: e428e250 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 8b20c1999d3a70c14608f26f752c9155e7db700a
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8b20c1999d3a70c14608f26f752c9155e7db700a

--------------------------------

commit c194dad2 upstream.

s390 has a swap_ex_entry_fixup function, however it is not being used
since common code expects a swap_ex_entry_fixup define. If it is not
defined the default implementation will be used. So fix this by adding
a proper define.
However also the implementation of the function must be fixed, since a
NULL value for handler has a special meaning and must not be adjusted.

Luckily all of this doesn't fix a real bug currently: the main extable
is correctly sorted during build time, and for runtime sorting there
is currently no case where the handler field is not NULL.

Fixes: 05a68e89 ("s390/kernel: expand exception table logic to allow new handling options")
Acked-by: NIlya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: NAlexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 49aa9c9c7fa7c580d8f9f65b7bd05e537a4a3e4b
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=49aa9c9c7fa7c580d8f9f65b7bd05e537a4a3e4b

--------------------------------

commit f2b277c4 upstream.

Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:

  echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled

the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:

  fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.

That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.

Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict.  Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.

Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.

Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.comSigned-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NZeal Robot <zealci@zte.com.cn>
Reported-by: Nwangyong <wang.yong12@zte.com.cn>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: CGEL ZTE <cgel.zte@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 6acbc8875282d3ca8a73fa93cd7a9b166de5019c
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6acbc8875282d3ca8a73fa93cd7a9b166de5019c

--------------------------------

commit 8d0657f3 upstream.

Fix a tiny memory leak when flushing the reset work queue.

Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 9d8a11d74de547093f1848ee4e5886a31c77aa97
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9d8a11d74de547093f1848ee4e5886a31c77aa97

--------------------------------

commit c4208653 upstream.

Similar to "igc_read_phy_reg_gpy: drop premature return" patch.
igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.

Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.

Fixes: 5586838f ("igc: Add code for PHY support")
Suggested-by: NDima Ruinskiy <dima.ruinskiy@intel.com>
Reported-by: NCorinna Vinschen <vinschen@redhat.com>
Signed-off-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NNaama Meir <naamax.meir@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 223744f5213311abdd2fcabe08c3bae19a9c1716
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=223744f5213311abdd2fcabe08c3bae19a9c1716

--------------------------------

commit bac129db upstream.

This driver, like several others, uses a chained IRQ for each GPIO bank,
and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result,
a call to irq_set_irq_wake() needs to lock both the upstream and
downstream irq_desc's. Lockdep considers this to be a possible deadlock
when the irq_desc's share lockdep classes, which they do by default:

 ============================================
 WARNING: possible recursive locking detected
 5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
 --------------------------------------------
 init/307 is trying to acquire lock:
 c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0

 but task is already holding lock:
 c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 4 locks held by init/307:
  #0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x23c
  #1: c20f7760 (&dev->mutex){....}-{3:3}, at: device_shutdown+0xf4/0x224
  #2: c2e804d8 (&dev->mutex){....}-{3:3}, at: device_shutdown+0x104/0x224
  #3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0

 stack backtrace:
 CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-gc849047c2473 #1
 Hardware name: Allwinner sun8i Family
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x68/0x90
  dump_stack_lvl from __lock_acquire+0x1680/0x31a0
  __lock_acquire from lock_acquire+0x148/0x3dc
  lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c
  _raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0
  __irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c
  irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c
    [tail call from sunxi_pinctrl_irq_set_wake]
  irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4
  gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c
  gpio_keys_shutdown from device_shutdown+0x180/0x224
  device_shutdown from __do_sys_reboot+0x134/0x23c
  __do_sys_reboot from ret_fast_syscall+0x0/0x1c

However, this can never deadlock because the upstream and downstream
IRQs are never the same (nor do they even involve the same irqchip).

Silence this erroneous lockdep splat by applying what appears to be the
usual fix of moving the GPIO IRQs to separate lockdep classes.

Fixes: a59c99d9 ("pinctrl: sunxi: Forward calls to irq_set_irq_wake")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NJernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220216040037.22730-1-samuel@sholland.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 2851b76e5fd0ed80402d433ed0d28f970c0e67ff
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2851b76e5fd0ed80402d433ed0d28f970c0e67ff

--------------------------------

commit dc975207 upstream.

The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.

iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:

 $ tc filter show dev swp2 ingress
 ...
 filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
   eth_type ipv6
   dst_ip 2001:db8:1::7bf
   skip_sw
   in_hw in_hw_count 1
         action order 1:  police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
         ref 1 bind 1
         not_in_hw
         used_hw_stats immediate

The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.

Fix that by using JSON output instead.

Fixes: 5061e773 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: NAmit Cohen <amcohen@nvidia.com>
Reviewed-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 85bf489c5c01fcfb46d586a1b90686a9b526f1b8
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=85bf489c5c01fcfb46d586a1b90686a9b526f1b8

--------------------------------

commit 7b83299e upstream.

early_param() handlers should return 0 on success.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 would cause the "option=value" string
to be added to init's environment strings, polluting it.

../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy':
../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type]
../arch/arm/mm/mmu.c: In function 'test_noalign_setup':
../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type]

Fixes: b849a60e ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NIgor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 6b6341049086e9a20a33695f8c4ebb6ba3d4e073
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6b6341049086e9a20a33695f8c4ebb6ba3d4e073

--------------------------------

commit d920eaa4 upstream.

The kgdb code needs to register an undef hook for the Thumb UDF
instruction that will fault in order to be functional on Thumb2
platforms.
Reported-by: NJohannes Stezenbach <js@sig21.net>
Tested-by: NJohannes Stezenbach <js@sig21.net>
Fixes: 5cbad0eb ("kgdb: support for ARCH=arm")
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit fefe4cb4a6403d24dd227b3a5667f462ba17dce9
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fefe4cb4a6403d24dd227b3a5667f462ba17dce9

--------------------------------

commit fda26354 upstream.

igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.

Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.

Fixes: 5586838f ("igc: Add code for PHY support")
Signed-off-by: NCorinna Vinschen <vinschen@redhat.com>
Acked-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NNaama Meir <naamax.meir@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 0632854fb171ca46a32193a8666c82baf324e253
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0632854fb171ca46a32193a8666c82baf324e253

--------------------------------

commit b5fbaf7d upstream.

Commit b18c6c3c ("ASoC: rockchip: cdn-dp sound output use spdif")
switched the platform to SPDIF, but we didn't fix up the device tree.

Drop the pinctrl settings, because the 'spdif_bus' pins are either:
 * unused (on kevin, bob), so the settings is ~harmless
 * used by a different function (on scarlet), which causes probe
   failures (!!)

Fixes: b18c6c3c ("ASoC: rockchip: cdn-dp sound output use spdif")
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NChen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeidSigned-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 43eaf1b17845a25e3e3a7d3f09c2f5ebd4a9d607
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43eaf1b17845a25e3e3a7d3f09c2f5ebd4a9d607

--------------------------------

commit 035b0fcf upstream.

The driver uses an atomic_t variable: gs_usb:active_channels to keep
track of the number of opened channels in order to only allocate
memory for the URBs when this count changes from zero to one.

However, the driver does not decrement the counter when an error
occurs in gs_can_open(). This issue is fixed by changing the type from
atomic_t to u8 and by simplifying the logic accordingly.

It is safe to use an u8 here because the network stack big kernel lock
(a.k.a. rtnl_mutex) is being hold. For details, please refer to [1].

[1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t

Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.frSigned-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit daaed6ced88c021798b7f739839091b5cc38000f
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=daaed6ced88c021798b7f739839091b5cc38000f

--------------------------------

commit c5487b9c upstream.

Currently, the following error messages are seen during boot:

asoc-simple-card sound: control 2:0:0:SPDIF Switch:0 is already present
cs4265 1-004f: ASoC: failed to add widget SPDIF dapm kcontrol SPDIF Switch: -16

Quoting Mark Brown:

"The driver is just plain buggy, it defines both a regular SPIDF Switch
control and a SND_SOC_DAPM_SWITCH() called SPDIF both of which will
create an identically named control, it can never have loaded without
error.  One or both of those has to be renamed or they need to be
merged into one thing."

Fix the duplicated control name by combining the two SPDIF controls here
and move the register bits onto the DAPM widget and have DAPM control them.

Fixes: f853d6b3 ("ASoC: cs4265: Add a S/PDIF enable switch")
Signed-off-by: NFabio Estevam <festevam@denx.de>
Acked-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220215120514.1760628-1-festevam@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 8b8ac465bf526a1241cd2eb1333d039c87911170
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8b8ac465bf526a1241cd2eb1333d039c87911170

--------------------------------

commit 1ba603f5 upstream.

modprobe can't handle spaces in aliases. Get rid of it to fix the issue.

Link: https://lore.kernel.org/r/20220211102704.128354-1-sudeep.holla@arm.com
Fixes: aa4f886f ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Reviewed-by: NCristian Marussi <cristian.marussi@arm.com>
Signed-off-by: NAlyssa Ross <hi@alyssa.is>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 667df6fe3ece20aaaefc8838659a7e0504cd9a32
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=667df6fe3ece20aaaefc8838659a7e0504cd9a32

--------------------------------

commit 258dd902 upstream.

When the "block" flag is false, the old code would sometimes still call
check_var_size(), which wrongly tells ->query_variable_store() that it can
block.

As far as I can tell, this can't really materialize as a bug at the moment,
because ->query_variable_store only does something on X86 with generic EFI,
and in that configuration we always take the efivar_entry_set_nonblocking()
path.

Fixes: ca0e30dc ("efi: Add nonblocking option to efi_query_variable_store()")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218180559.1432559-1-jannh@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 283c37e5429e0c5469b6ce785fec9da1248c7d14
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=283c37e5429e0c5469b6ce785fec9da1248c7d14

--------------------------------

commit 6c7273a2 upstream.

Commit c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.

To fix this, do not set work_done to false for a !netif_carrier_ok().

Fixes: c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: NMaurice Baijens <maurice.baijens@ellips.com>
Tested-by: NMaurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: NSandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 5f394102ee27dbf051a4e283390cd8d1759dacea
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5f394102ee27dbf051a4e283390cd8d1759dacea

--------------------------------

commit bd6f1fd5 upstream.

During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.

The following log reveals it:

[    3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[    3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[    3.975181] Call Trace:
[    3.976208]  local_pci_probe+0x13f/0x210
[    3.977248]  pci_device_probe+0x34c/0x6d0
[    3.977255]  ? pci_uevent+0x470/0x470
[    3.978265]  really_probe+0x24c/0x8d0
[    3.978273]  __driver_probe_device+0x1b3/0x280
[    3.979288]  driver_probe_device+0x50/0x370

Fix this by checking whether the 'ci' is a null pointer first.

Fixes: 8c14f9c7 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: NZheyu Ma <zheyuma97@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.104
commit 92b791771abd2ebbd85cbc4d17388f6bd939977f
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XAC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=92b791771abd2ebbd85cbc4d17388f6bd939977f

--------------------------------

commit 570425f8 upstream.

Finish initializing the adapter before registering netdev so state
is consistent.

Fixes: c26eba03 ("ibmvnic: Update reset infrastructure to support tunable parameters")
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>