Add structures to be used by the eadm subchannel driver.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add the eadm facility bits to the css characteristics and move
them to a new header.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Allow subchannel drivers build as a module to schedule subchannel work.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

New zcrypt module supports IBM CryptoExpress 4 cards.
Signed-off-by: NHolger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Msgtype implementations are now separated from card specific modules
and can be dynamically registered. Existing msgtype implementations
are restructured in modules.
Signed-off-by: NHolger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add the function facility information as new ap_device and sysfs
attribute. Also make the number of requests in device
queue and in device driver queue accessible in sysfs.
Reviewed-by: NIngo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: NHolger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Query AP configuration information. Improve performance of AP bus
scans by skipping AP device probing, if the AP deviec is not
configured.
Reviewed-by: NIngo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: NHolger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

machine_crash_shutdown() was the only function in crash.c.
So move the function and delete one file.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Unify all our cpu hotplug notifiers to mask out the CPU_TASKS_FROZEN
bit, so we don't have to add all the *_FROZEN variant cases to the
notifiers.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For SMP and !SMP smp_find_processor_id() either takes a u16 or
an unsigned int argument. Fix this so both versions take a u16.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Saves a couple of lines of code.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

CONFIG_S390_GUEST determines whether virtio guest drivers are built, and
the virtio console is not enforced as default.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Split the base menu into more descriptive categories like processor,
memory, etc. and move virtualization related entries to the
Virtualization menu.
Also select KEXEC unconditionally.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Expose cpu cache topology via sysfs.
The created sysfs directory structure is compatible to what x86, ia64
and powerpc have.
On s390 we expose only information about cpu caches which are private
to a cpu via sysfs . Caches which are shared between cpus do not have
a sysfs representation.
The reason for that is that the file "shared_cpu_map" is mandatory
and only if running under LPAR it is possible to tell which cpus
share which cache. Second level hypervisors however do not and cannot
expose that information to guests.
In order to have a consistent view we made the choice to always only
expose information about private cpu caches via sysfs.

Example for a z196 cpu (cpu1 in /sys/devices/cpu):

cpu1/cache/index0/size -- 64K
cpu1/cache/index0/type -- Data
cpu1/cache/index0/level -- 1
cpu1/cache/index0/number_of_sets -- 64
cpu1/cache/index0/shared_cpu_map -- 00000000,00000002
cpu1/cache/index0/shared_cpu_list -- 1
cpu1/cache/index0/coherency_line_size -- 256
cpu1/cache/index0/ways_of_associativity -- 4
cpu1/cache/index1/size -- 128K
cpu1/cache/index1/type -- Instruction
cpu1/cache/index1/level -- 1
cpu1/cache/index1/number_of_sets -- 64
cpu1/cache/index1/shared_cpu_map -- 00000000,00000002
cpu1/cache/index1/shared_cpu_list -- 1
cpu1/cache/index1/coherency_line_size -- 256
cpu1/cache/index1/ways_of_associativity -- 8
cpu1/cache/index2/size -- 1536K
cpu1/cache/index2/type -- Unified
cpu1/cache/index2/level -- 2
cpu1/cache/index2/number_of_sets -- 512
cpu1/cache/index2/shared_cpu_map -- 00000000,00000002
cpu1/cache/index2/shared_cpu_list -- 1
cpu1/cache/index2/coherency_line_size -- 256
cpu1/cache/index2/ways_of_associativity -- 12
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

So far, large page support was completely disabled with
CONFIG_DEBUG_PAGEALLOC, although it would be sufficient if only the
large page kernel mapping was disabled. This patch enables large page
support with CONFIG_DEBUG_PAGEALLOC, while it prevents the large kernel
mapping in that case.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Our memcpy and memcmp variants were implemented by calling the corresponding
gcc builtin variants.
However gcc is free to replace a call to __builtin_memcmp with a call to memcmp
which, when called, will result in an endless recursion within memcmp.
So let's provide asm variants and also fix the variants that are used for
uncompressing the kernel image.
In addition remove all other occurences of builtin function calls.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make use of new immediate instructions that came with the
extended immediate and general instruction extension facilities.
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The s390 implementation of the JIT compiler for packet filter speedup.
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Pull more networking fixes from David Miller:

 1) Eric Dumazet discovered and fixed what turned out to be a family of
    bugs.  These functions were using pskb_may_pull() which might need
    to reallocate the linear SKB data buffer, but the callers were not
    expecting this possibility.  The callers have cached pointers to the
    packet header areas, and would need to reload them if we were to
    continue using pskb_may_pull().

    So they could end up reading garbage.

    It's easier to just change these RAW4/RAW6/MIP6 routines to use
    skb_header_pointer() instead of pskb_may_pull(), which won't modify
    the linear SKB data area.

 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can
    call down into the TCP keepalive code.  The case basically involves
    creating a raw socket with sk_protocol == IPPROTO_TCP, then calling
    setsockopt(sock_fd, SO_KEEPALIVE, ...)

    Fixed by Eric Dumazet.

 3) Bluetooth devices do not get configured properly while being powered
    on, resulting in always using legacy pairing instead of SSP.  Fix
    from Andrzej Kaczmarek.

 4) Bluetooth cancels delayed work erroneously, put stricter checks in
    place.  From Andrei Emeltchenko.

 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in
    cfg80211, from Luis R.  Rodriguez.

 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach.

 7) Missing module license in bcm87xx driver, from Peter Huewe.

 8) Team driver can lose port changed events when adding devices to a
    team, fix from Jiri Pirko.

 9) Fix endless loop when trying ot unregister PPPOE device in zombie
    state, from Xiaodong Xu.

10) batman-adv layer needs to set MAC address of software device
    earlier, otherwise we call tt_local_add with it uninitialized.

11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but
    that doesn't program the device properly.  From Marek Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: mip6: fix mip6_mh_filter()
  ipv6: raw: fix icmpv6_filter()
  net: guard tcp_set_keepalive() to tcp sockets
  phy/micrel: Add missing header to micrel_phy.h
  phy/micrel: Rename KS80xx to KSZ80xx
  phy/micrel: Implement support for KSZ8021
  batman-adv: Fix symmetry check / route flapping in multi interface setups
  batman-adv: Fix change mac address of soft iface.
  pppoe: drop PPPOX_ZOMBIEs in pppoe_release
  team: send port changed when added
  ipv4: raw: fix icmp_filter()
  net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver
  iwlwifi: don't double free the interrupt in failure path
  cfg80211: fix possible circular lock on reg_regdb_search()
  Bluetooth: Fix not removing power_off delayed work
  Bluetooth: Fix freeing uninitialized delayed works
  Bluetooth: mgmt: Fix enabling LE while powered off
  Bluetooth: mgmt: Fix enabling SSP while powered off

mip6_mh_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Included fixes:
- fix the behaviour of batman-adv in case of virtual interface MAC change event
- fix symmetric link check in neighbour selection
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

icmpv6_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.

Also, if icmpv6 header cannot be found, do not deliver the packet,
as we do in IPv4.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull SuperH fix from Paul Mundt:
 "One last minute regression fix.."

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: pfc: Fix up GPIO mux type reconfig case.

Merge misc fixes from Andrew Morton:
 "One maintainer change and three bugfixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (4 commits)
  c/r: prctl: fix build error for no-MMU case
  lib/flex_proportions.c: fix corruption of denominator in flexible proportions
  checksyscalls: fix "here document" handling
  pwm-backlight: take over maintenance

Commit 1ad75b9e ("c/r: prctl: add minimal address test to
PR_SET_MM") added some address checking to prctl_set_mm() used by
checkpoint-restore.  This causes a build error for no-MMU systems:

   kernel/sys.c: In function 'prctl_set_mm':
   kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function)

The test for mmap_min_addr doesn't make a lot of sense for no-MMU code
as noted in commit 6e141546 ("NOMMU: Optimise away the
{dac_,}mmap_min_addr tests").

This patch defines mmap_min_addr as 0UL in the no-MMU case so that the
compiler will optimize away tests for "addr < mmap_min_addr".
Signed-off-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@vger.kernel.org>	[3.6.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When racing with CPU hotplug, percpu_counter_sum() can return negative
values for the number of observed events.

This confuses fprop_new_period(), which uses unsigned type and as a
result number of events is set to big *positive* number.  From that
moment on, things go pear shaped and can result e.g.  in division by
zero as denominator is later truncated to 32-bits.

This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's
3.6.0-rc6 based kernel.

Fix the issue by using a signed type in fprop_new_period().  That makes
us bail out from the function without doing anything (mistakenly)
thinking there are no events to age.  That makes aging somewhat
inaccurate but getting accurate data would be rather hard.
Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: NBorislav Petkov <bp@amd64.org>
Reported-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"echo" doesn't read from stdin, therefore the checksyscalls script didn't
warn about not implemented system calls anymore since 29dc54c6
("checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source").

Use "cat" instead of "echo" which handles this correctly.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the pwm-backlight driver is lacking a proper maintainer and is the
heaviest user of the PWM framework I'm taking over maintenance.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NArun Murthy <arun.murthy@stericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Robert Morell <rmorell@nvidia.com>
Cc: Dilan Lee <dilee@nvidia.com>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some drivers need to switch pin states between GPIO and pin function at
runtime, which was inadvertently broken in the pinctrl driver for GPIOs
being bound to a specific direction.

This fixes up the request path to ensure that previously configured GPIOs
don't cause us to inadvertently error out with an unsupported mux on
reconfig, which in practice is primarily aimed at trapping pull-up/down
users that have yet to be implemented under the new API.

Fixes up regressions in the TPU PWM driver, amongst others.
Reported-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

John W. Linville says:

====================
Please pull this last(?) batch of fixes intended for 3.6...

For the Bluetooth bits, Gustavo says this:

"Here goes probably my last update to 3.6. It includes the two patches
you were ok last week(from Andrzej Kaczmarek), those are critical
ones, and two other fixes one for a system crash and the other for
a missing lockdep annotation."

The referenced fixes from Andrzej prevent attempts to configure devices
that are powered-off.

Along with the Bluetooth fixes, there are a couple of 802.11 fixes.
Emmanuel Grumbach gives us an iwlwifi fix to prevent releasing an
interrupt twice.  Luis R. Rodriguez provides a fix for a possible
circular lock dependency in the cfg80211 regulatory enforcement code.

All of these have been in linux-next for a few days.  I hope they are
not too late to make the 3.6 release!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull tile gxio ABI fix from Chris Metcalf:
 "This fixes a last-minute change in the Tilera hypervisor ABI for TRIO
  (PCI root complex) support.  We've locked in this ABI going forward
  and will make sure no further ABI changes like this occur."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: gxio iorpc numbering change for TRIO interface

Pull vfio fixes from Alex Williamson:
 "VFIO doc update and virqfd race fix"

* tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio:
  vfio: Fix virqfd release race
  vfio: Trivial Documentation correction

Merge tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull a Xen fix from Konrad Rzeszutek Wilk:
 "It is a bug-fix when we run the initial PV guest on a AMD K8 machine
  and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the
  Northbridge.

  We end up in the situation where the initial domain gets too much
  information and gets confused and crashes - the fix is to restrict the
  domain to get the information - and we do it by just disabling NUMA on
  the PV guest (the hypervisor is still able to do its proper NUMA
  allocations of guests).

  It is OK to disable the PV guest from accessing NUMA data as right now
  we do not inject any NUMA node information to the PV guests.  When we
  do get to that point, then this patch will have to be reverted."

 * Disable PV NUMA support as we do not do anything with it (yet) and it
   can cause bootup crashes on certain AMD machines.

* tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/boot: Disable NUMA for PV guests.

Pull two ceph fixes from Sage Weil:
 "The first fixes a leak in the rbd setup error path, and the second
  fixes a more serious problem with mismatched kmap/kunmap that surfaced
  after the recent refactoring work."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: only kunmap kmapped pages
  rbd: drop dev reference on error in rbd_open()

Its possible to use RAW sockets to get a crash in
tcp_set_keepalive() / sk_reset_timer()

Fix is to make sure socket is a SOCK_STREAM one.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The license header was missing in micrel_phy.h . This patch adds
one.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no such part as KS8001, KS8041 or KS8051. There are only
KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match
the Micrel naming.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The KSZ8021 PHY was previously caught by KS8051, which is not correct.
This PHY needs additional setup if it is strapped for address 0. In such
case an reserved bit must be written in the 0x16, "Operation Mode Strap
Override" register. According to the KS8051 datasheet, that bit means
"PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021.
The issue where the ethernet controller (Freescale FEC) did not communicate
with network is fixed by writing this bit as 1.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An ABI numbering change was made in the hypervisor for Tilera's 4.1
MDE release (just shipped).  It's incompatible with the previous 4.0
release ABI numbering, so we track the new numbering going forward.
We plan to avoid modifying ABI numbering for these interfaces again.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The hypervisor is in charge of allocating the proper "NUMA" memory
and dealing with the CPU scheduler to keep them bound to the proper
NUMA node. The PV guests (and PVHVM) have no inkling of where they
run and do not need to know that right now. In the future we will
need to inject NUMA configuration data (if a guest spans two or more
NUMA nodes) so that the kernel can make the right choices. But those
patches are not yet present.

In the meantime, disable the NUMA capability in the PV guest, which
also fixes a bootup issue. Andre says:

"we see Dom0 crashes due to the kernel detecting the NUMA topology not
by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA).

This will detect the actual NUMA config of the physical machine, but
will crash about the mismatch with Dom0's virtual memory. Variation of
the theme: Dom0 sees what it's not supposed to see.

This happens with the said config option enabled and on a machine where
this scanning is still enabled (K8 and Fam10h, not Bulldozer class)

We have this dump then:
NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 MemBase 0000000000000000 Limit 0000000040000000
Node 1 MemBase 0000000040000000 Limit 0000000138000000
Node 2 MemBase 0000000138000000 Limit 00000001f8000000
Node 3 MemBase 00000001f8000000 Limit 0000000238000000
Initmem setup node 0 0000000000000000-0000000040000000
  NODE_DATA [000000003ffd9000 - 000000003fffffff]
Initmem setup node 1 0000000040000000-0000000138000000
  NODE_DATA [0000000137fd9000 - 0000000137ffffff]
Initmem setup node 2 0000000138000000-00000001f8000000
  NODE_DATA [00000001f095e000 - 00000001f0984fff]
Initmem setup node 3 00000001f8000000-0000000238000000
Cannot find 159744 bytes in node 3
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar
RIP: e030:[<ffffffff81d220e6>]  [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
.. snip..
  [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178
  [<ffffffff81d23348>] sparse_init+0xe4/0x25a
  [<ffffffff81d16840>] paging_init+0x13/0x22
  [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b
  [<ffffffff81683954>] ? printk+0x3c/0x3e
  [<ffffffff81d01a38>] start_kernel+0xe5/0x468
  [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1
  [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36
  [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c
"

so we just disable NUMA scanning by setting numa_off=1.

CC: stable@vger.kernel.org
Reported-and-Tested-by: NAndre Przywara <andre.przywara@amd.com>
Acked-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>