On High end systems (1024 or so cpus) this can potentially cause stack
overflow. Fix the stack usage.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In many places we will need to use the same combination of flags.  Specify
a single GFP_THISNODE definition for ease of use in gfp.h.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Profiling really suffers with off node buffers.  Fail if no memory is
available on the nodes.  The profiling code can deal with these failures
should they occur.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are frequent references to *z in get_page_from_freelist.

Add an explicit zone variable that can be used in all these places.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The uncached allocator manages per node pools.  Specify __GFP_THISNODE in
order to force allocation on the indicated node or fail.  The uncached
allocator has already logic to deal with failing allocations.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the user specified a node where we should move the page to then we
really do not want any other node.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Add __GFP_THISNODE to avoid fallback to other nodes and ignore cpuset/memory policy restrictions

Add a new gfp flag __GFP_THISNODE to avoid fallback to other nodes.  This
flag is essential if a kernel component requires memory to be located on a
certain node.  It will be needed for alloc_pages_node() to force allocation
on the indicated node and for alloc_pages() to force allocation on the
current node.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Place the alien array cache locks of on slab malloc slab caches on a
seperate lockdep class.  This avoids false positives from lockdep

[akpm@osdl.org: build fix]
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is fairly easy to get a system to oops by simply sizing a cache via
/proc in such a way that one of the chaches (shared is easiest) becomes
bigger than the maximum allowed slab allocation size.  This occurs because
enable_cpucache() fails if it cannot reallocate some caches.

However, enable_cpucache() is used for multiple purposes: resizing caches,
cache creation and bootstrap.

If the slab is already up then we already have working caches.  The resize
can fail without a problem.  We just need to return the proper error code.
F.e.  after this patch:

# echo "size-64 10000 50 1000" >/proc/slabinfo
-bash: echo: write error: Cannot allocate memory

notice no OOPS.

If we are doing a kmem_cache_create() then we also should not panic but
return -ENOMEM.

If on the other hand we do not have a fully bootstrapped slab allocator yet
then we should indeed panic since we are unable to bring up the slab to its
full functionality.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ability to free memory allocated to a slab cache is also useful if an
error occurs during setup of a slab.  So extract the function.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[akpm@osdl.org: export fix]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Let's try to keep mm/ comments more useful and up to date. This is a start.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Also, checks if we get a valid slabp_cache for off slab slab-descriptors.
We should always get this.  If we don't, then in that case we, will have to
disable off-slab descriptors for this cache and do the calculations again.
This is a rare case, so add a BUG_ON, for now, just in case.
Signed-off-by: NAlok N Kataria <alok.kataria@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce ARCH_LOW_ADDRESS_LIMIT which can be set per architecture to
override the 4GB default limit used by the bootmem allocater within
__alloc_bootmem_low() and __alloc_bootmem_low_node().  E.g.  s390 needs a
2GB limit instead of 4GB.
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Print the name of the task invoking the OOM killer.  Could make debugging
easier.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Skip kernel threads, rather than having them return 0 from badness.
Theoretically, badness might truncate all results to 0, thus a kernel thread
might be picked first, causing an infinite loop.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PF_SWAPOFF processes currently cause select_bad_process to return straight
away.  Instead, give them high priority, so we will kill them first, however
we also first ensure no parallel OOM kills are happening at the same time.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Having the oomkilladj == OOM_DISABLE check before the releasing check means
that oomkilladj == OOM_DISABLE tasks exiting will not stop the OOM killer.

Moving the test down will give the desired behaviour.  Also: it will allow
them to "OOM-kill" themselves if they are exiting.  As per the previous patch,
this is required to prevent OOM killer deadlocks (and they don't actually get
killed, because they're already exiting -- they're simply allowed access to
memory reserves).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If current *is* exiting, it should actually be allowed to access reserved
memory rather than OOM kill something else.  Can't do this via a straight
check in page_alloc.c because that would allow multiple tasks to use up
reserves.  Instead cause current to OOM-kill itself which will mark it as
TIF_MEMDIE.

The current procedure of simply aborting the OOM-kill if a task is exiting can
lead to OOM deadlocks.

In the case of killing a PF_EXITING task, don't make a lot of noise about it.
This becomes more important in future patches, where we can "kill" OOM_DISABLE
tasks.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cpuset_excl_nodes_overlap does not always indicate that killing a task will
not free any memory we for us.  For example, we may be asking for an
allocation from _anywhere_ in the machine, or the task in question may be
pinning memory that is outside its cpuset.  Fix this by just causing
cpuset_excl_nodes_overlap to reduce the badness rather than disallow it.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Potentially it takes several scans of the lru lists before we can even start
reclaiming pages.

mapped pages, with young ptes can take 2 passes on the active list + one on
the inactive list.  But reclaim_mapped may not always kick in instantly, so it
could take even more than that.

Raise the threshold for marking a zone as all_unreclaimable from a factor of 4
time the pages in the zone to 6.  Introduce a mechanism to force
reclaim_mapped if we've reached a factor 3 and still haven't made progress.

Previously, a customer doing stress testing was able to easily OOM the box
after using only a small fraction of its swap (~100MB).  After the patches, it
would only OOM after having used up all swap (~800MB).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__alloc_pages currently starts shooting if page reclaim has failed to free up
swap_cluster_max pages in one run through the priorities.  This is not always
a good indicator on its own, so make use of the all_unreclaimable logic as
well: don't consider going OOM until all zones we're interested in are
unreclaimable.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently we can silently drop data if the write to swap failed.  It
usually doesn't result in data-corruption because on page-in the process
will receive SIGBUS (assuming write-failure implies read-failure).

This assumption might or might not be valid.

This patch will avoid the page being discarded after a failed write.  But
will print a warning the sysadmin _should_ take to heart, if a lot of swap
space becomes un-writeable, OOM is not far off.

Tested by making the write fail 'randomly' once every 50 writes or so.

[akpm@osdl.org: printk warning fix]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As explained by Heiko, on s390 (32-bit) ARCH_KMALLOC_MINALIGN is set to
eight because their common I/O layer allocates data structures that need to
have an eight byte alignment.  This does not work when CONFIG_SLAB_DEBUG is
enabled because kmem_cache_create will override alignment to BYTES_PER_WORD
which is four.

So change kmem_cache_create to ensure cache alignment is always at minimum
what the architecture or caller mandates even if slab debugging is enabled.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lock_page needs the caller to have a reference on the page->mapping inode
due to sync_page, ergo set_page_dirty_lock is obviously buggy according to
its comments.

Solve it by introducing a new lock_page_nosync which does not do a sync_page.

akpm: unpleasant solution to an unpleasant problem.  If it goes wrong it could
cause great slowdowns while the lock_page() caller waits for kblockd to
perform the unplug.  And if a filesystem has special sync_page() requirements
(none presently do), permanent hangs are possible.

otoh, set_page_dirty_lock() is usually (always?) called against userspace
pages.  They are always up-to-date, so there shouldn't be any pending read I/O
against these pages.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some users of remove_mapping had been unsafe.

Modify the remove_mapping precondition to ensure the caller has locked the
page and obtained the correct mapping.  Modify callers to ensure the
mapping is the correct one.

[hugh@veritas.com: swapper_space fix]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These functions are already documented quite well with long comments.  Now
add kerneldoc style header to make this turn up in everyones favorite doc
format.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch splits alloc_percpu() up into two phases.  Likewise for
free_percpu().  This allows clients to limit initial allocations to online
cpu's, and to populate or depopulate per-cpu data at run time as needed:

  struct my_struct *obj;

  /* initial allocation for online cpu's */
  obj = percpu_alloc(sizeof(struct my_struct), GFP_KERNEL);

  ...

  /* populate per-cpu data for cpu coming online */
  ptr = percpu_populate(obj, sizeof(struct my_struct), GFP_KERNEL, cpu);

  ...

  /* access per-cpu object */
  ptr = percpu_ptr(obj, smp_processor_id());

  ...

  /* depopulate per-cpu data for cpu going offline */
  percpu_depopulate(obj, cpu);

  ...

  /* final removal */
  percpu_free(obj);
Signed-off-by: NMartin Peschke <mp3@de.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a notifer chain to the out of memory killer.  If one of the registered
callbacks could release some memory, do not kill the process but return and
retry the allocation that forced the oom killer to run.

The purpose of the notifier is to add a safety net in the presence of
memory ballooners.  If the resource manager inflated the balloon to a size
where memory allocations can not be satisfied anymore, it is better to
deflate the balloon a bit instead of killing processes.

The implementation for the s390 ballooner is included.

[akpm@osdl.org: cleanups]
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I wonder why we need this bitmask indexing into zone->node_zonelists[]?

We always start with the highest zone and then include all lower zones
if we build zonelists.

Are there really cases where we need allocation from ZONE_DMA or
ZONE_HIGHMEM but not ZONE_NORMAL? It seems that the current implementation
of highest_zone() makes that already impossible.

If we go linear on the index then gfp_zone() == highest_zone() and a lot
of definitions fall by the wayside.

We can now revert back to the use of gfp_zone() in mempolicy.c ;-)
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After we have done this we can now do some typing cleanup.

The memory policy layer keeps a policy_zone that specifies
the zone that gets memory policies applied. This variable
can now be of type enum zone_type.

The check_highest_zone function and the build_zonelists funnctionm must
then also take a enum zone_type parameter.

Plus there are a number of loops over zones that also should use
zone_type.

We run into some troubles at some points with functions that need a
zone_type variable to become -1. Fix that up.

[pj@sgi.com: fix set_mempolicy() crash]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a check in zonelist_policy that compares pieces of the bitmap
obtained from a gfp mask via GFP_ZONETYPES with a zone number in function
zonelist_policy().

The bitmap is an ORed mask of __GFP_DMA, __GFP_DMA32 and __GFP_HIGHMEM.
The policy_zone is a zone number with the possible values of ZONE_DMA,
ZONE_DMA32, ZONE_HIGHMEM and ZONE_NORMAL. These are two different domains
of values.

For some reason seemed to work before the zone reduction patchset (It
definitely works on SGI boxes since we just have one zone and the check
cannot fail).

With the zone reduction patchset this check definitely fails on systems
with two zones if the system actually has memory in both zones.

This is because ZONE_NORMAL is selected using no __GFP flag at
all and thus gfp_zone(gfpmask) == 0. ZONE_DMA is selected when __GFP_DMA
is set. __GFP_DMA is 0x01.  So gfp_zone(gfpmask) == 1.

policy_zone is set to ZONE_NORMAL (==1) if ZONE_NORMAL and ZONE_DMA are
populated.

For ZONE_NORMAL gfp_zone(<no _GFP_DMA>) yields 0 which is <
policy_zone(ZONE_NORMAL) and so policy is not applied to regular memory
allocations!

Instead gfp_zone(__GFP_DMA) == 1 which results in policy being applied
to DMA allocations!

What we realy want in that place is to establish the highest allowable
zone for a given gfp_mask. If the highest zone is higher or equal to the
policy_zone then memory policies need to be applied. We have such
a highest_zone() function in page_alloc.c.

So move the highest_zone() function from mm/page_alloc.c into
include/linux/gfp.h.  On the way we simplify the function and use the new
zone_type that was also introduced with the zone reduction patchset plus we
also specify the right type for the gfp flags parameter.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We cannot check MAX_NR_ZONES since it not defined in the preprocessor
anymore.

So remove the check.

The maximum number of zones per node for i386 is 3 since i386 does not
support ZONE_DMA32.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

eventcounters: Do not display counters for zones that are not available on an
arch

Do not define or display counters for the DMA32 and the HIGHMEM zone if such
zones were not configured.

[akpm@osdl.org: s390 fix]
[heiko.carstens@de.ibm.com: s390 fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make ZONE_HIGHMEM optional

- ifdef out code and definitions related to CONFIG_HIGHMEM

- __GFP_HIGHMEM falls back to normal allocations if there is no
  ZONE_HIGHMEM

- GFP_ZONEMASK becomes 0x01 if there is no DMA32 and no HIGHMEM
  zone.

[jdike@addtoit.com: build fix]
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NChristoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make ZONE_DMA32 optional

- Add #ifdefs around ZONE_DMA32 specific code and definitions.

- Add CONFIG_ZONE_DMA32 config option and use that for x86_64
  that alone needs this zone.

- Remove the use of CONFIG_DMA_IS_DMA32 and CONFIG_DMA_IS_NORMAL
  for ia64 and fix up the way per node ZVCs are calculated.

- Fall back to prior GFP_ZONEMASK of 0x03 if there is no
  DMA32 zone.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use enum for zones and reformat zones dependent information

Add comments explaning the use of zones and add a zones_t type for zone
numbers.

Line up information that will be #ifdefd by the following patches.

[akpm@osdl.org: comment cleanups]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

page allocator ZONE_HIGHMEM fixups

1. We do not need to do an #ifdef in si_meminfo since both counters
   in use are zero if !CONFIG_HIGHMEM.

2. Add #ifdef in si_meminfo_node instead to avoid referencing zone
   information for ZONE_HIGHMEM if we do not have HIGHMEM
   (may not be there after the following patches).

3. Replace the use of ZONE_HIGHMEM with MAX_NR_ZONES in build_zonelists_node

4. build_zonelists_node: Remove BUG_ON for ZONE_HIGHMEM. Zone will
   be optional soon and thus BUG_ON cannot be triggered anymore.

5. init_free_area_core: Replace a use of ZONE_HIGHMEM with NR_MAX_ZONES.

[akpm@osdl.org: cleanups]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move totalhigh_pages and nr_free_highpages() into highmem.c/.h

Move the totalhigh_pages definition into highmem.c/.h.  Move the
nr_free_highpages function into highmem.c

[yoichi_yuasa@tripeaks.co.jp: build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set.

Make HIGHMEM dependent texts and make display of highmem counters optional

Some texts are depending on CONFIG_HIGHMEM.

Remove those strings and remove the display of highmem counter values if
CONFIG_HIGHMEM is not set.

[akpm@osdl.org: remove some ifdefs]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>