This enables bridge vlan_protocol to be configured through netlink.

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, kernel behaves the
same way as this feature is not implemented.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For classifiers getting invoked via tc_classify(), we always need an
extra function call into tc_classify_compat(), as both are being
exported as symbols and tc_classify() itself doesn't do much except
handling of reclassifications when tp->classify() returned with
TC_ACT_RECLASSIFY.

CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(),
all others use tc_classify(). When tc actions are being configured
out in the kernel, tc_classify() effectively does nothing besides
delegating.

We could spare this layer and consolidate both functions. pktgen on
single CPU constantly pushing skbs directly into the netif_receive_skb()
path with a dummy classifier on ingress qdisc attached, improves
slightly from 22.3Mpps to 23.1Mpps.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for using conntrack helpers to assist protocol detection.
The new OVS_CT_ATTR_HELPER attribute of the CT action specifies a helper
to be used for this connection. If no helper is specified, then helpers
will be automatically applied as per the sysctl configuration of
net.netfilter.nf_conntrack_helper.

The helper may be specified as part of the conntrack action, eg:
ct(helper=ftp). Initial packets for related connections should be
committed to allow later packets for the flow to be considered
established.

Example ovs-ofctl flows allowing FTP connections from ports 1->2:
in_port=1,tcp,action=ct(helper=ftp,commit),2
in_port=2,tcp,ct_state=-trk,action=ct(recirc)
in_port=2,tcp,ct_state=+trk-new+est,action=1
in_port=2,tcp,ct_state=+trk+rel,action=1
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow matching and setting the ct_label field. As with ct_mark, this is
populated by executing the CT action. The label field may be modified by
specifying a label and mask nested under the CT action. It is stored as
metadata attached to the connection. Label modification occurs after
lookup, and will only persist when the conntrack entry is committed by
providing the COMMIT flag to the CT action. Labels are currently fixed
to 128 bits in size.
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add functions to change connlabel length into nf_conntrack_labels.c so
they may be reused by other modules like OVS and nftables without
needing to jump through xt_match_check() hoops.
Suggested-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow matching and setting the ct_mark field. As with ct_state and
ct_zone, these fields are populated when the CT action is executed. To
write to this field, a value and mask can be specified as a nested
attribute under the CT action. This data is stored with the conntrack
entry, and is executed after the lookup occurs for the CT action. The
conntrack entry itself must be committed using the COMMIT flag in the CT
action flags for this change to persist.
Signed-off-by: NJustin Pettit <jpettit@nicira.com>
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Expose the kernel connection tracker via OVS. Userspace components can
make use of the CT action to populate the connection state (ct_state)
field for a flow. This state can be subsequently matched.

Exposed connection states are OVS_CS_F_*:
- NEW (0x01) - Beginning of a new connection.
- ESTABLISHED (0x02) - Part of an existing connection.
- RELATED (0x04) - Related to an established connection.
- INVALID (0x20) - Could not track the connection for this packet.
- REPLY_DIR (0x40) - This packet is in the reply direction for the flow.
- TRACKED (0x80) - This packet has been sent through conntrack.

When the CT action is executed by itself, it will send the packet
through the connection tracker and populate the ct_state field with one
or more of the connection state flags above. The CT action will always
set the TRACKED bit.

When the COMMIT flag is passed to the conntrack action, this specifies
that information about the connection should be stored. This allows
subsequent packets for the same (or related) connections to be
correlated with this connection. Sending subsequent packets for the
connection through conntrack allows the connection tracker to consider
the packets as ESTABLISHED, RELATED, and/or REPLY_DIR.

The CT action may optionally take a zone to track the flow within. This
allows connections with the same 5-tuple to be kept logically separate
from connections in other zones. If the zone is specified, then the
"ct_zone" match field will be subsequently populated with the zone id.

IP fragments are handled by transparently assembling them as part of the
CT action. The maximum received unit (MRU) size is tracked so that
refragmentation can occur during output.

IP frag handling contributed by Andy Zhou.

Based on original design by Justin Pettit.
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Signed-off-by: NJustin Pettit <jpettit@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This variation on skb_dst_copy() doesn't require two skbs.
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to act_gact/act_mirred, act_bpf can be lockless in packet processing
with extra care taken to free bpf programs after rcu grace period.
Replacement of existing act_bpf (very rare) is done with synchronize_rcu()
and final destruction is done from tc_action_ops->cleanup() callback that is
called from tcf_exts_destroy()->tcf_action_destroy()->__tcf_hash_release() when
bind and refcnt reach zero which is only possible when classifier is destroyed.
Previous two patches fixed the last two classifiers (tcindex and rsvp) to
call tcf_exts_destroy() from rcu callback.

Similar to gact/mirred there is a race between prog->filter and
prog->tcf_action. Meaning that the program being replaced may use
previous default action if it happened to return TC_ACT_UNSPEC.
act_mirred race betwen tcf_action and tcfm_dev is similar.
In all cases the race is harmless.
Long term we may want to improve the situation by replacing the whole
tc_action->priv as single pointer instead of updating inner fields one by one.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_hash_destroy() used once. Make it static.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vxlan_get_sk_family inline function was added after the last #endif,
making multiple inclusion of net/vxlan.h fail. Move it to the proper place.
Reported-by: NMark Rustad <mark.d.rustad@intel.com>
Fixes: 705cc62f ("vxlan: provide access function for vxlan socket address family")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove various inlined functions not referenced in the kernel.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When TCP pacing was added back in linux-3.12, we chose
to apply a fixed ratio of 200 % against current rate,
to allow probing for optimal throughput even during
slow start phase, where cwnd can be doubled every other gRTT.

At Google, we found it was better applying a different ratio
while in Congestion Avoidance phase.
This ratio was set to 120 %.

We've used the normal tcp_in_slow_start() helper for a while,
then tuned the condition to select the conservative ratio
as soon as cwnd >= ssthresh/2 :

- After cwnd reduction, it is safer to ramp up more slowly,
  as we approach optimal cwnd.
- Initial ramp up (ssthresh == INFINITY) still allows doubling
  cwnd every other RTT.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

slow start after idle might reduce cwnd, but we perform this
after first packet was cooked and sent.

With TSO/GSO, it means that we might send a full TSO packet
even if cwnd should have been reduced to IW10.

Moving the SSAI check in skb_entail() makes sense, because
we slightly reduce number of times this check is done,
especially for large send() and TCP Small queue callbacks from
softirq context.

As Neal pointed out, we also need to perform the check
if/when receive window opens.

Tested:

Following packetdrill test demonstrates the problem
// Test of slow start after idle

`sysctl -q net.ipv4.tcp_slow_start_after_idle=1`

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0    setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0    bind(3, ..., ...) = 0
+0    listen(3, 1) = 0

+0    < S 0:0(0) win 65535 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6>
+.100 < . 1:1(0) ack 1 win 511
+0    accept(3, ..., ...) = 4
+0    setsockopt(4, SOL_SOCKET, SO_SNDBUF, [200000], 4) = 0

+0    write(4, ..., 26000) = 26000
+0    > . 1:5001(5000) ack 1
+0    > . 5001:10001(5000) ack 1
+0    %{ assert tcpi_snd_cwnd == 10 }%

+.100 < . 1:1(0) ack 10001 win 511
+0    %{ assert tcpi_snd_cwnd == 20, tcpi_snd_cwnd }%
+0    > . 10001:20001(10000) ack 1
+0    > P. 20001:26001(6000) ack 1

+.100 < . 1:1(0) ack 26001 win 511
+0    %{ assert tcpi_snd_cwnd == 36, tcpi_snd_cwnd }%

+4 write(4, ..., 20000) = 20000
// If slow start after idle works properly, we should send 5 MSS here (cwnd/2)
+0    > . 26001:31001(5000) ack 1
+0    %{ assert tcpi_snd_cwnd == 10, tcpi_snd_cwnd }%
+0    > . 31001:36001(5000) ack 1
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add cfg and family arguments to lwt build state functions. cfg is a void
pointer and will either be a pointer to a fib_config or fib6_config
structure. The family parameter indicates which one (either AF_INET
or AF_INET6).

LWT encpasulation implementation may use the fib configuration to build
the LWT state.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__recnt and related fields need to be in its own cacheline for performance
reasons. Commit 61adedf3 ("route: move lwtunnel state to dst_entry")
broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered.

This patch fixes the breakage by moving the lwtunnel state to the end of
dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline
with __refcnt and may affect performance, thus further patches may be
needed.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add calls to gro_cells infrastructure to do GRO when receiving on a tunnel.

Testing:

Ran 200 netperf TCP_STREAM instance

  - With fix (GRO enabled on VXLAN interface)

    Verify GRO is happening.

    9084 MBps tput
    3.44% CPU utilization

  - Without fix (GRO disabled on VXLAN interface)

    Verified no GRO is happening.

    9084 MBps tput
    5.54% CPU utilization
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The remote checksum offload GRO did not consider the case that frag0
might be in use. This patch fixes that by accessing headers using the
skb_gro functions and not saving offsets relative to skb->head.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow specification of per route IP tunnel instructions also for IPv6.
This complements commit 3093fbe7 ("route: Per route IP tunnel metadata
via lightweight tunnel").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
CC: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use flowi_tunnel in flowi6 similarly to what is done with IPv4.
This complements commit 1b7179d3 ("route: Extend flow representation
with tunnel key").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If output device wants to see the dst, inherit the dst of the original skb
in the ndisc request.

This is an IPv6 counterpart of commit 0accfc26 ("arp: Inherit metadata
dst when creating ARP requests").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.

As a bonus, this brings a nice diffstat.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ip_tunnels.h include file uses mixture of __u16 and u16 (etc.) types.
Unify it to the non-underscore variants.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The custom alignment of struct ip_tunnel_key is unnecessary. In struct
sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the
first field.

The structure is also packed even without the __packed keyword.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since all users are now converted to the inline implementation,
remove the out-of-line implementation entirely.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A proprietary vendor command may send back useful data to the user
application.

For example, the field level applied on the NFC router antenna.

Still based on net/wireless/nl80211.c implementation,
add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in
order to send back over netlink data generated by a proprietary
command.
Signed-off-by: NChristophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Some drivers needs to have ability to reinit NCI core, for example
after updating firmware in setup() of post_setup() callback. This
patch makes nci_core_reset() and nci_core_init() functions public,
to make it possible.
Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Some drivers require non-standard configuration after NCI_CORE_INIT
request, because they need to know ndev->manufact_specific_info or
ndev->manufact_id. This patch adds post_setup handler allowing to do
such custom configuration.
Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

While running net-next I hit this:
[  634.073119] ===============================
[  634.073150] [ INFO: suspicious RCU usage. ]
[  634.073182] 4.2.0-rc6+ #45 Not tainted
[  634.073213] -------------------------------
[  634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check()
usage!
[  634.073274]
               other info that might help us debug this:

[  634.073307]
               rcu_scheduler_active = 1, debug_locks = 1
[  634.073338] 2 locks held by swapper/0/0:
[  634.073369]  #0:  (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>]
call_timer_fn+0x5/0x480
[  634.073412]  #1:  (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>]
icmp_send+0x155/0x5f0
[  634.073450]
               stack backtrace:
[  634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45
[  634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[  634.073545]  0000000000000000 0593ba8242d9ace4 ffff88002fc03b48
ffffffff81803f1b
[  634.073612]  0000000000000000 ffffffff81e12500 ffff88002fc03b78
ffffffff811003c5
[  634.073642]  0000000000000000 ffff88002ec4e600 ffffffff81f00f80
ffff88002fc03cf0
[  634.073669] Call Trace:
[  634.073694]  <IRQ>  [<ffffffff81803f1b>] dump_stack+0x4c/0x65
[  634.073728]  [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100
[  634.073763]  [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0
[  634.073793]  [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0
[  634.073818]  [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0
[  634.073844]  [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0
[  634.073873]  [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0
[  634.073899]  [<ffffffff8174bdda>] arp_error_report+0x3a/0x80
[  634.073926]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.073952]  [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110
[  634.073984]  [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480
[  634.074013]  [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430
[  634.074013]  [<ffffffff810af50e>] __do_softirq+0xde/0x630
[  634.074013]  [<ffffffff810afc97>] irq_exit+0x117/0x120
[  634.074013]  [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60
[  634.074013]  [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80
[  634.074013]  <EOI>  [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10
[  634.074013]  [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10
[  634.074013]  [<ffffffff81027d43>] default_idle+0x23/0x200
[  634.074013]  [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20
[  634.074013]  [<ffffffff810f89ba>] default_idle_call+0x2a/0x40
[  634.074013]  [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0
[  634.074013]  [<ffffffff817f9cad>] rest_init+0x13d/0x150
[  634.074013]  [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9
[  634.074013]  [<ffffffff81f68120>] ?
early_idt_handler_array+0x120/0x120
[  634.074013]  [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c
[  634.074013]  [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d

It would seem vrf_master_ifindex_rcu() can be called without RCU held in
other contexts as well so introduce a new helper which acquires rcu and
returns the ifindex.
Also add curly braces around both the "if" and "else" parts as per the
style guide.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_LWTUNNEL config is not enabled, the lwtstate_free() is not
declared in lwtunnel.h at all. However, even in this case, the function
is still referenced in fib_semantics.c so that there appears the
following sparse warnings:

net/ipv4/fib_semantics.c:553:17: error: undefined identifier 'lwtstate_free'
  CC      net/ipv4/fib_semantics.o
  net/ipv4/fib_semantics.c: In function ‘fib_encap_match’:
  net/ipv4/fib_semantics.c:553:3: error: implicit declaration of function ‘lwtstate_free’ [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors
  make[1]: *** [net/ipv4/fib_semantics.o] Error 1
  make: *** [net/ipv4/fib_semantics.o] Error 2

To eliminate the error, we define an empty function for lwtstate_free()
in lwtunnel.h when CONFIG_LWTUNNEL is disabled.

Fixes: df383e62 ("lwtunnel: fix memory leak")
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

slave_queue has a num_slaves member which is unused, drop it.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The built lwtunnel_state struct has to be freed after comparison.

Fixes: 571e7226 ("ipv4: support for fib route lwtunnel encap attributes")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an inline helper for determining is a port is a DSA port.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the topology API is still in sufficient flux for changes to be
identified disable the use of the userspace ABI by adding #error
statements to the code, ensuring that nobody relies on the headers as
currently defined.  It is expected that this change will be reverted for
v4.3.
Signed-off-by: NMark Brown <broonie@kernel.org>

This switches the BCMA GPIO driver to use GPIOLIB_IRQCHIP to
handle its interrupts instead of rolling its own copy of the
irqdomain handling etc.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Allow the topology code to be compiled out so that users who don't need
topology don't need to havve the code compiled in, saving them some
memory.

Some more configuration could be added to remove some of the hooks into
the core data structures but that is probably best done with some
refactoring to use functions to do the updates of the data structures
rather than ifdefing in the code as we'd need to do at the minute.
Suggested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>