Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 26 9月, 2018 4 次提交
  3. 22 9月, 2018 2 次提交
  5. 21 9月, 2018 2 次提交
  7. 11 9月, 2018 11 次提交
  9. 06 9月, 2018 1 次提交
  11. 05 9月, 2018 1 次提交
    • M
      IB/mlx5: Change TX affinity assignment in RoCE LAG mode · c6a21c38
      由 Majd Dibbiny 提交于 
      In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected

To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.

The allocation algorithm is as follow:

1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
   per ucontext. Both initialized to 0.

2. In mlx5_ib_alloc_ucontext do:
 2.1. ucontext.tx_port_affinity = device.tx_port_affinity
 2.2. device.tx_port_affinity += 1

3. In modify QP INIT2RST:
 3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
 3.2. ucontext.tx_port_affinity += 1
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
      c6a21c38
  13. 11 8月, 2018 1 次提交
  15. 03 8月, 2018 1 次提交
    • J
      RDMA/netdev: Use priv_destructor for netdev cleanup · 9f49a5b5
      由 Jason Gunthorpe 提交于 
      Now that the unregister_netdev flow for IPoIB no longer relies on external
code we can now introduce the use of priv_destructor and
needs_free_netdev.

The rdma_netdev flow is switched to use the netdev common priv_destructor
instead of the special free_rdma_netdev and the IPOIB ULP adjusted:
 - priv_destructor needs to switch to point to the ULP's destructor
   which will then call the rdma_ndev's in the right order
 - We need to be careful around the error unwind of register_netdev
   as it sometimes calls priv_destructor on failure
 - ULPs need to use ndo_init/uninit to ensure proper ordering
   of failures around register_netdev

Switching to priv_destructor is a necessary pre-requisite to using
the rtnl new_link mechanism.

The VNIC user for rdma_netdev should also be revised, but that is left for
another patch.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDenis Drozdov <denisd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
      9f49a5b5
  17. 31 7月, 2018 1 次提交
    • J
      IB/uverbs: Add UVERBS_ATTR_FLAGS_IN to the specs language · bccd0622
      由 Jason Gunthorpe 提交于 
      This clearly indicates that the input is a bitwise combination of values
in an enum, and identifies which enum contains the definition of the bits.

Special accessors are provided that handle the mandatory validation of the
allowed bits and enforce the correct type for bitwise flags.

If we had introduced this at the start then the kabi would have uniformly
used u64 data to pass flags, however today there is a mixture of u64 and
u32 flags. All places are converted to accept both sizes and the accessor
fixes it. This allows all existing flags to grow to u64 in future without
any hassle.

Finally all flags are, by definition, optional. If flags are not passed
the accessor does not fail, but provides a value of zero.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
      bccd0622
  19. 27 7月, 2018 1 次提交
  21. 25 7月, 2018 4 次提交
  23. 24 7月, 2018 1 次提交
  25. 11 7月, 2018 2 次提交
  27. 10 7月, 2018 2 次提交
  29. 05 7月, 2018 4 次提交
  31. 04 7月, 2018 2 次提交