- 25 3月, 2010 2 次提交
-
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 Jan Engelhardt 提交于
Supplement to 1159683e. Downgrade the log level to INFO for most checkentry messages as they are, IMO, just an extra information to the -EINVAL code that is returned as part of a parameter "constraint violation". Leave errors to real errors, such as being unable to create a LED trigger. Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 18 3月, 2010 1 次提交
-
-
由 Jan Engelhardt 提交于
ENOMEM is a very obvious error code (cf. EINVAL), so I think we do not really need a warning message. Not to mention that if the allocation fails, the user is most likely going to get a stack trace from slab already. Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 17 3月, 2010 7 次提交
-
-
由 Jan Engelhardt 提交于
Cc: Kuo-Lang Tseng <kuo-lang.tseng@intel.com> Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 stephen hemminger 提交于
The shared packet statistics are a potential source of slow down on bridged traffic. Convert to per-cpu array, but only keep those statistics which change per-packet. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we get a warning from the call in br_forward(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 3月, 2010 2 次提交
-
-
由 Michael Braun 提交于
From: Michael Braun <michael-dev@fami-braun.de> bridge: Fix br_forward crash in promiscuous mode It's a linux-next kernel from 2010-03-12 on an x86 system and it OOPs in the bridge module in br_pass_frame_up (called by br_handle_frame_finish) because brdev cannot be dereferenced (its set to a non-null value). Adding some BUG_ON statements revealed that BR_INPUT_SKB_CB(skb)->brdev == br-dev (as set in br_handle_frame_finish first) only holds until br_forward is called. The next call to br_pass_frame_up then fails. Digging deeper it seems that br_forward either frees the skb or passes it to NF_HOOK which will in turn take care of freeing the skb. The same is holds for br_pass_frame_ip. So it seems as if two independent skb allocations are required. As far as I can see, commit b33084be ("bridge: Avoid unnecessary clone on forward path") removed skb duplication and so likely causes this crash. This crash does not happen on 2.6.33. I've therefore modified br_forward the same way br_flood has been modified so that the skb is not freed if skb0 is going to be used and I can confirm that the attached patch resolves the issue for me. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Since all callers of br_mdb_ip_get need to check whether the hash table is NULL, this patch moves the check into the function. This fixes the two callers (query/leave handler) that didn't check it. Reported-by: NMichael Braun <michael-dev@fami-braun.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2010 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2010 5 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NBart De Schuymer <bdschuym@pandora.be> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Emese Revfy 提交于
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NDavid Teigland <teigland@redhat.com> Acked-by: NMatt Domsch <Matt_Domsch@dell.com> Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: NHans J. Koch <hjk@linutronix.de> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Herbert Xu 提交于
Thanks to Paul McKenny for pointing out that it is incorrect to use synchronize_rcu_bh to ensure that pending callbacks have completed. Instead we should use rcu_barrier_bh. Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As Paul McKenney correctly pointed out, __br_mdb_ip_get needs to use the RCU list walking primitive in order to work correctly on platforms where data-dependency ordering is not guaranteed. Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We dereference "port" on the lines immediately before and immediately after the test so port should hopefully never be null here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2010 1 次提交
-
-
由 Randy Dunlap 提交于
br_multicast calls ip_send_check(), so it should depend on INET. built-in: br_multicast.c:(.text+0x88cf4): undefined reference to `ip_send_check' or modular: ERROR: "ip_send_check" [net/bridge/bridge.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2010 1 次提交
-
-
由 Sridhar Samudrala 提交于
Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2010 14 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch allows the user to the IGMP parameters related to the snooping function of the bridge. This includes various time values and retransmission limits. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch allows the user to control the hash elasticity/max parameters. The elasticity setting does not take effect until the next new multicast group is added. At which point it is checked and if after rehashing it still can't be satisfied then snooping will be disabled. The max setting on the other hand takes effect immediately. It must be a power of two and cannot be set to a value less than the current number of multicast group entries. This is the only way to shrink the multicast hash. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch allows the user to disable IGMP snooping completely through a sysfs toggle. It also allows the user to reenable snooping when it has been automatically disabled due to hash collisions. If the collisions have not been resolved however the system will refuse to reenable snooping. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch allows the user to forcibly enable/disable ports as having multicast routers attached. A port with a multicast router will receive all multicast traffic. The value 0 disables it completely. The default is 1 which lets the system automatically detect the presence of routers (currently this is limited to picking up queries), and 2 means that the port will always receive all multicast traffic. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch finally hooks up the multicast snooping module to the data path. In particular, all multicast packets passing through the bridge are fed into the module and switched by it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch hooks up the bridge start/stop and add/delete/disable port functions to the new multicast module. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch moves the main loop body in br_flood into the function may_deliver. The code that clones an skb and delivers it is moved into the deliver_clone function. This allows this to be reused by the future multicast forward function. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
this patch makes BR_INPUT_SKB_CB available on the xmit path so that we could avoid passing the br pointer around for the purpose of collecting device statistics. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When the packet is delivered to the local bridge device we may end up cloning it unnecessarily if no bridge port can receive the packet in br_flood. This patch avoids this by moving the skb_clone into br_flood. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
At the moment we deliver to the local bridge port via the function br_pass_frame_up before all other ports. There is no requirement for this. For the purpose of IGMP snooping, it would be more convenient if we did the local port last. Therefore this patch rearranges the bridge input processing so that the local bridge port gets to see the packet last (if at all). Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 2月, 2010 6 次提交
-
-
由 Florian Westphal 提交于
Add the required handlers to convert 32 bit ebtables mark match and match target structs to 64bit layout. Signed-off-by: NFlorian Westphal <fwestphal@astaro.com>
-
由 Florian Westphal 提交于
ebt_limit structure is larger on 64 bit systems due to "long" type used in the (kernel-only) data section. Setting .compatsize is enough in this case, these values have no meaning in userspace. Signed-off-by: NFlorian Westphal <fwestphal@astaro.com>
-
由 Florian Westphal 提交于
ebtables can be compiled to perform userspace-side padding of structures. In that case, all the structures are already in the 'native' format expected by the kernel. This tries to determine what format the userspace program is using. For most set/getsockopts, this can be done by checking the len argument for sizeof(compat_ebt_replace) and re-trying the native handler on error. In case of EBT_SO_GET_ENTRIES, the native handler is tried first, it will error out early when checking the *len argument (the compat version has to defer this check until after iterating over the kernel data set once, to adjust for all the structure size differences). As this would cause error printks, remove those as well, as recommended by Bart de Schuymer. Signed-off-by: NFlorian Westphal <fw@strlen.de>
-
由 Florian Westphal 提交于
Main code for 32 bit userland ebtables binary with 64 bit kernels support. Tested on x86_64 kernel only, using 64bit ebtables binary for output comparision. At least ebt_mark, m_mark and ebt_limit need CONFIG_COMPAT hooks, too. remaining problem: The ebtables userland makefile has: ifeq ($(shell uname -m),sparc64) CFLAGS+=-DEBT_MIN_ALIGN=8 -DKERNEL_64_USERSPACE_32 endif struct ebt_replace, ebt_entry_match etc. then contain userland-side padding, i.e. even if we are called from a 32 bit userland, the structures may already be in the right format. This problem is addressed in a follow-up patch. Signed-off-by: NFlorian Westphal <fwestphal@astaro.com>
-
由 Florian Westphal 提交于
allows to call do_update_counters() from upcoming CONFIG_COMPAT code instead of copy&pasting the same code. Signed-off-by: NFlorian Westphal <fw@strlen.de>
-
由 Florian Westphal 提交于
once CONFIG_COMPAT support is added to ebtables, the new copy_counters_to_user function can be called instead of duplicating code. Also remove last use of MEMPRINT, as requested by Bart De Schuymer. Signed-off-by: NFlorian Westphal <fw@strlen.de>
-