Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 5月, 2015 1 次提交
  3. 21 5月, 2015 2 次提交
  5. 20 5月, 2015 1 次提交
  7. 07 3月, 2015 1 次提交
  9. 28 1月, 2015 1 次提交
  11. 28 12月, 2014 1 次提交
  13. 23 11月, 2014 2 次提交
    • T
      PCI/MSI: Rename mask/unmask_msi_irq treewide · 280510f1
      由 Thomas Gleixner 提交于 
      The PCI/MSI irq chip callbacks mask/unmask_msi_irq have been renamed
to pci_msi_mask/unmask_irq to mark them PCI specific. Rename all usage
sites. The conversion helper functions are kept around to avoid
conflicts in next and will be removed after merging into mainline.

Coccinelle assisted conversion. No functional change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: x86@kernel.org
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yijing Wang <wangyijing@huawei.com>
      280510f1
    • J
      PCI/MSI: Rename write_msi_msg() to pci_write_msi_msg() · 83a18912
      由 Jiang Liu 提交于 
      Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI
specific.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      83a18912
  15. 22 11月, 2014 1 次提交
  17. 14 11月, 2014 1 次提交
  19. 12 11月, 2014 1 次提交
  21. 02 10月, 2014 2 次提交
  23. 01 10月, 2014 1 次提交
  25. 24 9月, 2014 4 次提交
  27. 23 9月, 2014 1 次提交
  29. 06 9月, 2014 1 次提交
  31. 05 9月, 2014 4 次提交
  33. 03 9月, 2014 1 次提交
    • M
      PCI: designware: Add support for v3.65 hardware · b14a3d17
      由 Murali Karicheri 提交于 
      The Keystone PCI controller is based on v3.65 DesignWare hardware.  This
version differs from newer versions of the hardware in functional areas
discussed below that make it necessary to change dw_pcie_host_init() to
support v3.65 based PCI controller.

    1. No support for ATU port.  Any ATU-specific resource handling code is
       to be bypassed for v3.65 h/w.

    2. MSI controller uses application space to implement MSI and 32 MSI
       interrupts are multiplexed over 8 IRQs to the host.  Hence the code
       to process MSI IRQ needs to be different.  This patch allows
       platform driver to provide its own irq_domain_ops ptr to
       irq_domain_add_linear() through an API callback from the DesignWare
       core driver.

    3. MSI interrupt generation requires EP to write to the RC's
       application register.  So enhance the driver to allow setup of
       inbound access to MSI IRQ register as a post scan bus API callback.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NPratyush Anand <pratyush.anand@st.com>
Acked-by: NMohit KUMAR <mohit.kumar@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
      b14a3d17
  35. 23 7月, 2014 4 次提交
    • M
      PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware · 2f37c5a8
      由 Murali Karicheri 提交于 
      DesignWare v3.65 hardware implements MSI controller registers in
application space.  This requires updates to the DesignWare core to
support controllers based on this older hardware.

Add msi_irq_set()/clear() interfaces to allow Set/Clear MSI IRQ enable bit
in the application register.  Also, v3.65 hardware uses the MSI_IRQ
register in application register space to raise MSI IRQ to the RC from EP.
Current code uses the standard mechanism as per PCI spec.  So add
get_msi_data() to get the address of this register so common code can
work on both v3.65 and newer hardware.

[bhelgaas: changelog]
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NPratyush Anand <pratyush.anand@st.com>
Acked-by: NMohit Kumar <mohit.kumar@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
      2f37c5a8
    • M
      PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware · a1c0ae9c
      由 Murali Karicheri 提交于 
      DesignWare v3.65 hardware requires application space registers to be
configured to access the remote EP config space.

To support this, add rd_other_conf() and wr_other_conf() to pcie_host_ops.

[bhelgaas: changelog]
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NPratyush Anand <pratyush.anand@st.com>
Acked-by: NMohit Kumar <mohit.kumar@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
      a1c0ae9c
    • K
      PCI: designware: Program ATU with untranslated address · f4c55c5a
      由 Kishon Vijay Abraham I 提交于 
      In DRA7, the CPU sees 32-bit addresses, but the PCIe controller can see
only 28-bit addresses.  So whenever the CPU issues a read/write request,
the 4 most significant bits are used by L3 to determine the target
controller.  For example, the CPU reserves [mem 0x20000000-0x2fffffff]
for the PCIe controller but the PCIe controller will see only
[0x00000000-0x0fffffff].  For programming the outbound translation
window the *base* should be programmed as 0x00000000.  Whenever we try to
write to, e.g., 0x20000000, it will be translated to whatever we have
programmed in the translation window with base as 0x00000000.

This is needed when the dt node is modelled something like this:

    axi {
        compatible = "simple-bus";
        #size-cells = <1>;
        #address-cells = <1>;
        ranges = <0x0        0x20000000 0x10000000 // 28-bit bus
                  0x51000000 0x51000000 0x3000>;
        pcie@51000000 {
                reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
                reg-names = "config", "ti_conf", "rc_dbics";
                #address-cells = <3>;
                #size-cells = <2>;
                ranges = <0x81000000 0 0          0x03000 0 0x00010000
                          0x82000000 0 0x20013000 0x13000 0 0xffed000>;
        };
    };

Here the CPU address for configuration space is 0x20013000 and the
controller address for configuration space is 0x13000.  The controller
address should be used while programming the ATU (in order for translation
to happen properly in DRA7xx).
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMohit Kumar <mohit.kumar@st.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
      f4c55c5a
    • K
      PCI: designware: Look for configuration space in 'reg', not 'ranges' · 4dd964df
      由 Kishon Vijay Abraham I 提交于 
      The configuration address space has so far been specified in *ranges*,
however it should be specified in *reg* making it a platform MEM resource.
Hence used 'platform_get_resource_*' API to get configuration address space
in the designware driver.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMohit Kumar <mohit.kumar@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
      4dd964df
  37. 31 5月, 2014 1 次提交
  39. 17 4月, 2014 7 次提交
  41. 05 3月, 2014 1 次提交
  43. 20 2月, 2014 1 次提交