napi_gro_receive() checks NETIF_F_GRO bit as well, if the bit is not
set, we will go through GRO_NORMAL in napi_skb_finish(), so fall back
to netif_receive_skb_internal(), so we don't need to check NETIF_F_GRO
ourself.
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tokens and ctokens are defined as s64 in htb_class structure,
and clamped to 32bits value during netlink dumps:

cl->xstats.tokens = clamp_t(s64, PSCHED_NS2TICKS(cl->tokens),
                            INT_MIN, INT_MAX);

Defining it as u32 is working since userspace (tc) is printing it as
signed int, but a correct definition from the beginning is probably
better.

In the same time, 'giants' structure member is unused since years, so
update the comment to mark it unused.
Signed-off-by: NFlorent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/bgmac.c: In function 'bgmac_dma_alloc':
drivers/net/ethernet/broadcom/bgmac.c:619:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SRAB driver is the default way to communicate with the integrated
switch on iProc platforms and the MMAP driver is the way to communicate
with the integrated switch on DSL BCM63xx and CM BCM33xx.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/cavium/liquidio/request_manager.c: In function 'lio_process_iq_request_list':
drivers/net/ethernet/cavium/liquidio/request_manager.c:383:27: warning:
 variable 'irh' set but not used [-Wunused-but-set-variable]
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver displays an error message for each unrecognized dcbx TLV that's
received from the peer or configured on the device. It is observed that
syslog will be flooded with such messages in certain scenarios e.g.,
frequent link-flaps/lldp-transactions. Changing the severity of this
message to verbose level as it's not an error scenario/message.
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rds is the last in-kernel user of the old do_gettimeofday()
function. Convert it over to ktime_get_real() to make it
work more like the generic socket timestamps, and to let
us kill off do_gettimeofday().

A follow-up patch will have to change the user space interface
to deal better with 32-bit tasks, which may use an incompatible
layout for 'struct timespec'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added test case to receive multiple records with a single recvmsg()
operation with a MSG_PEEK set.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When tls records are decrypted using asynchronous acclerators such as
NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on
getting -EINPROGRESS, the tls record processing stops till the time the
crypto accelerator finishes off and returns the result. This incurs a
context switch and is not an efficient way of accessing the crypto
accelerators. Crypto accelerators work efficient when they are queued
with multiple crypto jobs without having to wait for the previous ones
to complete.

The patch submits multiple crypto requests without having to wait for
for previous ones to complete. This has been implemented for records
which are decrypted in zero-copy mode. At the end of recvmsg(), we wait
for all the asynchronous decryption requests to complete.

The references to records which have been sent for async decryption are
dropped. For cases where record decryption is not possible in zero-copy
mode, asynchronous decryption is not used and we wait for decryption
crypto api to complete.

For crypto requests executing in async fashion, the memory for
aead_request, sglists and skb etc is freed from the decryption
completion handler. The decryption completion handler wakesup the
sleeping user context when recvmsg() flags that it has done sending
all the decryption requests and there are no more decryption requests
pending to be completed.
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Reviewed-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx':
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning:
 variable 'rx_stats' set but not used [-Wunused-but-set-variable]
  struct bnxt_vf_rep_stats *rx_stats;
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XGMAC2 uses the same CBS mechanism as GMAC5, only registers offset
changes. Lets use the same TC callbacks and implement the .config_cbs
callback in XGMAC2 core.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ioana Radulescu says:

====================
dpaa2-eth: Move DPAA2 Ethernet driver

The Freescale/NXP DPAA2 Ethernet driver was first included in
drivers/staging, due to its dependencies on two components located
there at the time of its initial submission:
* the fsl-mc bus driver, which was moved to drivers/bus in kernel 4.17
* the dpio driver, which was moved to drivers/soc/fsl in kernel 4.18

More information on the DPAA2 architecture and the interactions
between the fsl-mc bus and the objects present on it can be found in:
Documentation/networking/dpaa2/overview.rst

For easier review, the patch is generated without the -M option,
although the driver files are moved without any code changes.

changes since v1[1]:
* remove RFC label, since dependencies have been merged on net-next
* add patch fixing a possible race at probe (reported by Andrew Lunn)

[1] https://lore.kernel.org/patchwork/patch/971333/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DPAA2 Ethernet driver supports Freescale/NXP SoCs with DPAA2
(DataPath Acceleration Architecture v2). The driver manages
network objects discovered on the fsl-mc bus.
Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only call netdev_register() at the end of the probe function,
once all other necessary bits and pieces are properly initialized.

We keep the rest of the netdevice initialization code in place,
at the earlier point of the probing sequence, including the
settings previously done in ndo_init.
Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com>
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some boards the interrupt can be shared between multiple devices.
For example on Turris Mox the interrupt is shared between all switches.
Signed-off-by: NMarek Behun <marek.behun@nic.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

nl_net is set on entry to ip6_route_info_create. Only devices
within that namespace are considered so no need to reset it
before returning.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make IPv4 consistent with IPv6 and return an extack message that the
ONLINK flag requires a nexthop device.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently a Linux IPv6 TCP sender will change the flow label upon
timeouts to potentially steer away from a data path that has gone
bad. However this does not help if the problem is on the ACK path
and the data path is healthy. In this case the receiver is likely
to receive repeated spurious retransmission because the sender
couldn't get the ACKs in time and has recurring timeouts.

This patch adds another feature to mitigate this problem. It
leverages the DSACK states in the receiver to change the flow
label of the ACKs to speculatively re-route the ACK packets.
In order to allow triggering on the second consecutive spurious
RTO, the receiver changes the flow label upon sending a second
consecutive DSACK for a sequence number below RCV.NXT.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the new locking rule, we have to take tcf_lock
for both ->init() and ->dump(), as RTNL will be removed.
However, it is missing for act_connmark.

Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provide a software TX timestamp as well as the ethtool query interface
and report the software timestamp capabilities.

Tested with "ethtool -T" and two linuxptp instances each bound to a
tunnel endpoint.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 331a9295 ("net: sched: act: add extack for lookup callback").

This extack is never used after 6 months... In fact, it can be just
set in the caller, right after ->lookup().

Cc: Alexander Aring <aring@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-09-01

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add AF_XDP zero-copy support for i40e driver (!), from Björn and Magnus.

2) BPF verifier improvements by giving each register its own liveness
   chain which allows to simplify and getting rid of skip_callee() logic,
   from Edward.

3) Add bpf fs pretty print support for percpu arraymap, percpu hashmap
   and percpu lru hashmap. Also add generic percpu formatted print on
   bpftool so the same can be dumped there, from Yonghong.

4) Add bpf_{set,get}sockopt() helper support for TCP_SAVE_SYN and
   TCP_SAVED_SYN options to allow reflection of tos/tclass from received
   SYN packet, from Nikita.

5) Misc improvements to the BPF sockmap test cases in terms of cgroup v2
   interaction and removal of incorrect shutdown() calls, from John.

6) Few cleanups in xdp_umem_assign_dev() and xdpsock samples, from Prashant.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit gets rid of the structure xdp_umem_props. It was there to
be able to break a dependency at one point, but this is no longer
needed. The values in the struct are instead stored directly in the
xdp_umem structure. This simplifies the xsk code as well as af_xdp
zero-copy drivers and as a bonus gets rid of one internal header file.

The i40e driver is also adapted to the new interface in this commit.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

With certain gcc versions, it was possible to get the warning
"'tx_desc' may be used uninitialized in this function" for the
i40e_xmit_zc. This was not possible, however this commit simplifies
the code path so that this warning is no longer emitted.
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

adding selftest for feature, introduced in commit 9452048c79404 ("bpf:
add TCP_SAVE_SYN/TCP_SAVED_SYN options for bpf_(set|get)sockopt").
Signed-off-by: NNikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

- xsks_map size was fixed to 4, changed it MAX_SOCKS
- Remove redundant definition of MAX_SOCKS in xdpsock_user.c
- In dump_stats(), add NULL check for xsks[i]
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Since xdp_umem_query() was added one assignment of bpf.command was
missed from cleanup. Removing the assignment statement.

Fixes: 84c6b868 ("xsk: don't allow umem replace at stack level")
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).
Signed-off-by: NNikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Adding support for two new bpf get/set sockopts: TCP_SAVE_SYN (set)
and TCP_SAVED_SYN (get). This would allow for bpf program to build
logic based on data from ingress SYN packet (e.g. doing tcp's tos/
tclass reflection (see sample prog)) and do it transparently from
userspace program point of view.
Signed-off-by: NNikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Variable 'headroom' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
variable ‘headroom’ set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-08-30

This series contains updates to i40e, i40evf and virtchnl.

Jake implements helper functions to use an array to handle the queue
stats which reduces the boiler plate code as well as keep the complexity
localized to a few functions.

Paweł adds the ability to change a VF's MAC address from the host side
without having to reload the VF driver on the guest side.

Paul adds a check to ensure that the number of queues that the PF sends
to the VF is equal to or less than the maximum number of queues the VF
can support.

Mitch fixes an issue caught by GCC 8, where we need to not include the
terminating null in the length of the string for strncpy().

Lihong fixes a VF issue to ensure that it does not enter into
promiscuous mode when macvlan is added to the VF.  Fixed a potential
crash after a VF is removed, since the workqueue sync for the adminq
task was not being cancelled.

Harshitha fixes the type for field_flags in the virtchnl_filter struct.

Martyna removes an unnecessary check in a conditional if statement.

Björn fixes an issue reported by Jesper Dangaard Brouer, where the
driver was reporting incorrect statistics when XDP was enabled.

Jan fixes the potential reporting of incorrect speed settings.

Patryk fixed an issue where the flag
I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING was getting set when any offload is
set via ethtool.  Resolved by only setting this flag when VLAN offload
is enabled.  Also ensure we hold the rtnl lock when we are clearing the
interrupt scheme.  Added a check when deleting the MAC address from the
VF to ensure that the MAC address was not set by the PF and if it was,
do not delete it.

v2: updated patch 2 in the series based on community feedback from David
    Miller to inline a function
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To prevent VF from deleting MAC address that was assigned by the
PF we need to check for that scenario when we try to delete a MAC
address from a VF.
Signed-off-by: NPatryk Małek <patryk.malek@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If a VF is being removed, there is no need to continue with the
workqueue sync for the adminq task, thus cancel it. Without this call,
when VFs are created and removed right away, there might be a chance for
the driver to crash with events stuck in the adminq.
Signed-off-by: NLihong Yang <lihong.yang@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Hold the rtnl lock when we're clearing interrupt scheme
in i40e_shutdown and in i40e_remove.
Signed-off-by: NPatryk Małek <patryk.malek@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

With current implementation of i40evf_set_features when user sets
any offload via ethtool we set I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING
as a required aq which triggers driver to call
i40evf_enable_vlan_stripping. This shouldn't take place.
This patches fixes it by setting the flag only when VLAN offload
is turned on.
Signed-off-by: NPatryk Małek <patryk.malek@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If our card has been put in an unstable state due to
other drivers interacting with it, speed settings
might be incorrect. If incorrect, forcefully reset them
on open to known default values.
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When XDP is enabled, the driver will report incorrect
statistics. Received frames will reported as transmitted frames.

This commits fixes the i40e implementation of ndo_get_stats64 (struct
net_device_ops), so that iproute2 will report correct statistics
(e.g. when running "ip -stats link show dev eth0") even when XDP is
enabled.
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Fixes: 74608d17 ("i40e: add support for XDP_TX action")
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Static analysis tools report a problem from original driver submission.
Removing unnecessary check in condition.
Signed-off-by: NMartyna Szapar <martyna.szapar@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>