- 10 1月, 2012 15 次提交
-
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Artem Bityutskiy 提交于
This patch fixes the following build failure: In file included from include/linux/mtd/qinfo.h:4:0, from include/linux/mtd/pfow.h:7, from drivers/mtd/lpddr/lpddr_cmds.c:27: include/linux/mtd/map.h: In function 'inline_map_read': include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jonas Gorski 提交于
Arch setup code might want to use their own partition parsers, but still use the generic physmap flash driver. Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Aaron Sierra 提交于
This patch allows each CFI device map to use its own endianness. The globally defined CFI endianness (CONFIG_MTD_CFI_NOSWAP, CONFIG_MTD_CFI_BE_BYTE_SWAP or CONFIG_MTD_CFI_LE_BYTE_SWAP) becomes the default value which can be overridden by a driver for a particular device. Signed-off-by: NAaron Sierra <asierra@xes-inc.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Brian Norris 提交于
Macronix is produing SLC NAND MX30LF1208AA, so add their manufacturer code to the manufacturer lists. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
The <linux/module.h> pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used <linux/something.h> files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 21 9月, 2011 1 次提交
-
-
由 Brian Norris 提交于
These functions can be used instead of referencing -EUCLEAN and -EBADMSG all over the place. They should help make code a little bit more readable. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
- 11 9月, 2011 23 次提交
-
-
由 Brian Norris 提交于
The nand_chip.ops field is a struct that is passed around globally with no particular reason. Every time it is used, it could just as easily be replaced with a local struct that is updated on each operation. So make it local. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
We're missing a lot of important documentation in include/mtd/mtd-abi.h: * add a simple description of each ioctl (feel free to expand!) * give full explanations of recently added and modified operations * explain the usage of "RAW" that appear in different modes and types of operations * fix some comment style along the way Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW affected operations on in-band page data as well. To clarify these options and to emphasize that their effect is applied per-operation, we change the primary prefix to MTD_OPS_. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
We will want to use the MTD_OOB_{PLACE,AUTO,RAW} modes in user-space applications through the introduction of new ioctls, so we should make this enum a shared type. This enum is now anonymous. Artem: tweaked the patch. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
This fixes issues with `nanddump -n' and the MEMREADOOB[64] ioctls on hardware that performs error correction when reading only OOB data. A driver for such hardware needs to know when we're doing a RAW vs. a normal write, but mtd_do_read_oob does not pass such information to the lower layers (e.g., NAND). We should pass MTD_OOB_RAW or MTD_OOB_PLACE based on the MTD file mode. For now, most drivers can get away with just setting: chip->ecc.read_oob_raw = chip->ecc.read_oob This is done by default; but for systems that behave as described above, you must supply your own replacement function. This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
This fixes issues with `nandwrite -n -o' and the MEMWRITEOOB[64] ioctls on hardware that writes ECC when writing OOB. The problem arises as follows: `nandwrite -n' can write page data to flash without applying ECC, but when used with the `-o' option, ECC is applied (incorrectly), contrary to the `--noecc' option. I found that this is the case because my hardware computes and writes ECC data to flash upon either OOB write or page write. Thus, to support a proper "no ECC" write, my driver must know when we're performing a raw OOB write vs. a normal ECC OOB write. However, MTD does not pass any raw mode information to the write_oob functions. This patch addresses the problems by: 1) Passing MTD_OOB_RAW down to lower layers, instead of just defaulting to MTD_OOB_PLACE 2) Handling MTD_OOB_RAW within the NAND layer's `nand_do_write_oob' 3) Adding a new (replaceable) function pointer in struct ecc_ctrl; this function should support writing OOB without ECC data. Current hardware often can use the same OOB write function when writing either with or without ECC This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Brian Norris 提交于
Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@intel.com>
-
由 Tobias Klauser 提交于
The set_parts and priv members of struct platform_nand_chip where removed in commit c36a6ef3845262ade529afb9f458738b1f196f83 but the kerneldoc wasn't updated. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>
-
由 Brian Norris 提交于
Therefor -> Therefore [Intern], [Internal] -> [INTERN] [REPLACABLE] -> [REPLACEABLE] syndrom, syndom -> syndrome ecc -> ECC buswith -> buswidth endianess -> endianness dont -> don't occures -> occurs independend -> independent wihin -> within erease -> erase blockes -> blocks ... Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
mtd_device_register() is a limited version of mtd_device_parse_register. Replace it with macro calling mtd_device_parse_register(). Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
There is no need to pollute public header with a definition private to mtdpart.c. Move it from mtd/partitions.h to mtdpart.c Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
There is no need to export parse_mtd_partitions() now , as it's fully handled by registration functions. So move the definition to private header and remove respective EXPORT_SYMBOL_GPL. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Kyungmin Park 提交于
There are two different 4KiB pagesize chips KFM4G16Q4M series have NOP 4 with version ID 0x0131 But KFM4G16Q5M has NOP 1 with versoin ID 0x013e Note that Q5M means that it has NOP 1. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
All users have been converted to call of_mtd_parse_partitions through parse_mtd_partitions() multiplexer. Drop obsolete API. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Prepare to convert of_mtd_parse_partitions() to usual partitions parser: 1) Register ofpart parser 2) Internally don't use passed device for error printing 3) Add device_node to mtd_part_parser_data struct 4) Move of_mtd_parse_partitions from __devinit to common text section 5) add ofpart to the default list of partition parsers Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Encapsulate last MTD partition parser argument into a separate structure. Currently it holds only 'origin' field for RedBoot parser, but will be extended in future to contain at least device_node for OF devices. Amended commentary to make kerneldoc happy Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <dedekind1@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Lots (nearly all) mtd drivers contain nearly the similar code that calls parse_mtd_partitions, provides some platform-default values, if parsing fails, and registers mtd device. This is an aim to provide single implementation of this scenario: mtd_device_parse_register() which will handle all this parsing and defaults. Artem: amended comments Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
Drop now unused set_parts from struct platform_nand_data. Also, while we are at it, drop long unused priv field from platform_nand_data. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
Add support for MTDPART_OFS_RETAIN: such partitions start at the current offset, take as much space as possible, but rain part->size bytes after the end of the partitions for other parts. Primarily this is intended for ts72xx arm platforms cleanup. Artem: tweaked the patch a bit Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Dmitry Eremin-Solenikov 提交于
This function is unused now. Drop it. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-