Boris noticed in his simple quotas testing that he was getting a leak
with Sweet Tea's change to subvol create that stopped doing a
transaction commit.  This was just a side effect of that change.

In the delayed inode code we have an optimization that will free extra
reservations if we think we can pack a dir item into an already modified
leaf.  Previously this wouldn't be triggered in the subvolume create
case because we'd commit the transaction, it was still possible but
much harder to trigger.  It could actually be triggered if we did a
mkdir && subvol create with qgroups enabled.

This occurs because in btrfs_insert_delayed_dir_index(), which gets
called when we're adding the dir item, we do the following:

  btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL);

if we're able to skip reserving space.

The problem here is that trans->block_rsv points at the temporary block
rsv for the subvolume create, which has qgroup reservations in the block
rsv.

This is a problem because btrfs_block_rsv_release() will do the
following:

  if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) {
	  qgroup_to_release = block_rsv->qgroup_rsv_reserved -
		  block_rsv->qgroup_rsv_size;
	  block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size;
  }

The temporary block rsv just has ->qgroup_rsv_reserved set,
->qgroup_rsv_size == 0.  The optimization in
btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0.  Then
later on when we call btrfs_subvolume_release_metadata() which has

  btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release);
  btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release);

qgroup_to_release is set to 0, and we do not convert the reserved
metadata space.

The problem here is that the block rsv code has been unconditionally
messing with ->qgroup_rsv_reserved, because the main place this is used
is delalloc, and any time we call btrfs_block_rsv_release() we do it
with qgroup_to_release set, and thus do the proper accounting.

The subvolume code is the only other code that uses the qgroup
reservation stuff, but it's intermingled with the above optimization,
and thus was getting its reservation freed out from underneath it and
thus leaking the reserved space.

The solution is to simply not mess with the qgroup reservations if we
don't have qgroup_to_release set.  This works with the existing code as
anything that messes with the delalloc reservations always have
qgroup_to_release set.  This fixes the leak that Boris was observing.
Reviewed-by: NQu Wenruo <wqu@suse.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have observed a btrfs filesystem corruption on workloads using
no-holes and encoded writes via send stream v2. The symptom is that a
file appears to be truncated to the end of its last aligned extent, even
though the final unaligned extent and even the file extent and otherwise
correctly updated inode item have been written.

So if we were writing out a 1MiB+X file via 8 128K extents and one
extent of length X, i_size would be set to 1MiB, but the ninth extent,
nbyte, etc. would all appear correct otherwise.

The source of the race is a narrow (one line of code) window in which a
no-holes fs has read in an updated i_size, but has not yet set a shared
disk_i_size variable to write. Therefore, if two ordered extents run in
parallel (par for the course for receive workloads), the following
sequence can play out: (following "threads" a bit loosely, since there
are callbacks involved for endio but extra threads aren't needed to
cause the issue)

  ENC-WR1 (second to last)                                         ENC-WR2 (last)
  -------                                                          -------
  btrfs_do_encoded_write
    set i_size = 1M
    submit bio B1 ending at 1M
  endio B1
  btrfs_inode_safe_disk_i_size_write
    local i_size = 1M
    falls off a cliff for some reason
							      btrfs_do_encoded_write
								set i_size = 1M+X
								submit bio B2 ending at 1M+X
							      endio B2
							      btrfs_inode_safe_disk_i_size_write
								local i_size = 1M+X
								disk_i_size = 1M+X
    disk_i_size = 1M
							      btrfs_delayed_update_inode
    btrfs_delayed_update_inode

And the delayed inode ends up filled with nbytes=1M+X and isize=1M, and
writes respect i_size and present a corrupted file missing its last
extents.

Fix this by holding the inode lock in the no-holes case so that a thread
can't sneak in a write to disk_i_size that gets overwritten with an out
of date i_size.

Fixes: 41a2ee75 ("btrfs: introduce per-inode file extent tree")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NBoris Burkov <boris@bur.io>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

find_next_bit and find_next_zero_bit take @size as the second parameter and
@offset as the third parameter. They are specified opposite in
btrfs_ensure_empty_zones(). Thanks to the later loop, it never failed to
detect the empty zones. Fix them and (maybe) return the result a bit
faster.

Note: the naming is a bit confusing, size has two meanings here, bitmap
and our range size.

Fixes: 1cd6121f ("btrfs: zoned: implement zoned chunk allocator")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
With block-group-tree feature enabled, mounting it with clear_cache
would cause the following transaction abort at mount or remount:

  BTRFS info (device dm-4): force clearing of disk cache
  BTRFS info (device dm-4): using free space tree
  BTRFS info (device dm-4): auto enabling async discard
  BTRFS info (device dm-4): clearing free space tree
  BTRFS info (device dm-4): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
  BTRFS info (device dm-4): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
  BTRFS error (device dm-4): block-group-tree feature requires fres-space-tree and no-holes
  BTRFS error (device dm-4): super block corruption detected before writing it to disk
  BTRFS: error (device dm-4) in write_all_supers:4288: errno=-117 Filesystem corrupted (unexpected superblock corruption detected)
  BTRFS warning (device dm-4: state E): Skipping commit of aborted transaction.

[CAUSE]
For block-group-tree feature, we have an artificial dependency on
free-space-tree.

This means if we detect block-group-tree without v2 cache, we consider
it a corruption and cause the problem.

For clear_cache mount option, it would temporary disable v2 cache, then
re-enable it.

But unfortunately for that temporary v2 cache disabled status, we refuse
to write a superblock with bg tree only flag, thus leads to the above
transaction abortion.

[FIX]
For now, just reject clear_cache and v1 cache mount option for block
group tree.  So now we got a graceful rejection other than a transaction
abort:

  BTRFS info (device dm-4): force clearing of disk cache
  BTRFS error (device dm-4): cannot disable free space tree with block-group-tree feature
  BTRFS error (device dm-4): open_ctree failed

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When trying to move keys from one node/leaf to another sibling node/leaf,
if the sibling keys check fails we just print an error message with the
last key of the left sibling and the first key of the right sibling.
However it's also useful to print all the keys of each sibling, as it
may provide some clues to what went wrong, which code path may be
inserting keys in an incorrect order. So just do that, print the siblings
with btrfs_print_tree(), as it works for both leaves and nodes.
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If the sibling keys check fails before we move keys from one sibling
leaf to another, we are not aborting the transaction - we leave that to
some higher level caller of btrfs_search_slot() (or anything else that
uses it to insert items into a b+tree).

This means that the transaction abort will provide a stack trace that
omits the b+tree modification call chain. So change this to immediately
abort the transaction and therefore get a more useful stack trace that
shows us the call chain in the bt+tree modification code.

It's also important to immediately abort the transaction just in case
some higher level caller is not doing it, as this indicates a very
serious corruption and we should stop the possibility of doing further
damage.
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When a device replace finishes, the source device is freed by calling
btrfs_free_device() at btrfs_rm_dev_replace_free_srcdev(), but the
allocation state, tracked in the device's alloc_state io tree, is never
freed.

This is a regression recently introduced by commit f0bb5474 ("btrfs:
remove redundant release of btrfs_device::alloc_state"), which removed a
call to extent_io_tree_release() from btrfs_free_device(), with the
rationale that btrfs_close_one_device() already releases the allocation
state from a device and btrfs_close_one_device() is always called before
a device is freed with btrfs_free_device(). However that is not true for
the device replace case, as btrfs_free_device() is called without any
previous call to btrfs_close_one_device().

The issue is trivial to reproduce, for example, by running test btrfs/027
from fstests:

  $ ./check btrfs/027
  $ rmmod btrfs
  $ dmesg
  (...)
  [84519.395485] BTRFS info (device sdc): dev_replace from <missing disk> (devid 2) to /dev/sdg started
  [84519.466224] BTRFS info (device sdc): dev_replace from <missing disk> (devid 2) to /dev/sdg finished
  [84519.552251] BTRFS info (device sdc): scrub: started on devid 1
  [84519.552277] BTRFS info (device sdc): scrub: started on devid 2
  [84519.552332] BTRFS info (device sdc): scrub: started on devid 3
  [84519.552705] BTRFS info (device sdc): scrub: started on devid 4
  [84519.604261] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
  [84519.609374] BTRFS info (device sdc): scrub: finished on devid 3 with status: 0
  [84519.610818] BTRFS info (device sdc): scrub: finished on devid 1 with status: 0
  [84519.610927] BTRFS info (device sdc): scrub: finished on devid 2 with status: 0
  [84559.503795] BTRFS: state leak: start 1048576 end 1351614463 state 1 in tree 1 refs 1
  [84559.506764] BTRFS: state leak: start 1048576 end 1347420159 state 1 in tree 1 refs 1
  [84559.510294] BTRFS: state leak: start 1048576 end 1351614463 state 1 in tree 1 refs 1

So fix this by adding back the call to extent_io_tree_release() at
btrfs_free_device().

Fixes: f0bb5474 ("btrfs: remove redundant release of btrfs_device::alloc_state")
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Balance as exclusive state is compatible with paused balance and device
add, which makes some things more complicated. The assertion of valid
states when starting from paused balance needs to take into account two
more states, the combinations can be hit when there are several threads
racing to start balance and device add. This won't typically happen when
the commands are started from command line.

Scenario 1: With exclusive_operation state == BTRFS_EXCLOP_NONE.

Concurrently adding multiple devices to the same mount point and
btrfs_exclop_finish executed finishes before assertion in
btrfs_exclop_balance, exclusive_operation will changed to
BTRFS_EXCLOP_NONE state which lead to assertion failed:

  fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE ||
  fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD,
  in fs/btrfs/ioctl.c:456
  Call Trace:
   <TASK>
   btrfs_exclop_balance+0x13c/0x310
   ? memdup_user+0xab/0xc0
   ? PTR_ERR+0x17/0x20
   btrfs_ioctl_add_dev+0x2ee/0x320
   btrfs_ioctl+0x9d5/0x10d0
   ? btrfs_ioctl_encoded_write+0xb80/0xb80
   __x64_sys_ioctl+0x197/0x210
   do_syscall_64+0x3c/0xb0
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

Scenario 2: With exclusive_operation state == BTRFS_EXCLOP_BALANCE_PAUSED.

Concurrently adding multiple devices to the same mount point and
btrfs_exclop_balance executed finish before the latter thread execute
assertion in btrfs_exclop_balance, exclusive_operation will changed to
BTRFS_EXCLOP_BALANCE_PAUSED state which lead to assertion failed:

  fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE ||
  fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD ||
  fs_info->exclusive_operation == BTRFS_EXCLOP_NONE,
  fs/btrfs/ioctl.c:458
  Call Trace:
   <TASK>
   btrfs_exclop_balance+0x240/0x410
   ? memdup_user+0xab/0xc0
   ? PTR_ERR+0x17/0x20
   btrfs_ioctl_add_dev+0x2ee/0x320
   btrfs_ioctl+0x9d5/0x10d0
   ? btrfs_ioctl_encoded_write+0xb80/0xb80
   __x64_sys_ioctl+0x197/0x210
   do_syscall_64+0x3c/0xb0
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

An example of the failed assertion is below, which shows that the
paused balance is also needed to be checked.

  root@syzkaller:/home/xsk# ./repro
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  [  416.611428][ T7970] BTRFS info (device loop0): fs_info exclusive_operation: 0
  Failed to add device /dev/vda, errno 14
  [  416.613973][ T7971] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.615456][ T7972] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.617528][ T7973] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.618359][ T7974] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.622589][ T7975] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.624034][ T7976] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.626420][ T7977] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.627643][ T7978] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.629006][ T7979] BTRFS info (device loop0): fs_info exclusive_operation: 3
  [  416.630298][ T7980] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  Failed to add device /dev/vda, errno 14
  [  416.632787][ T7981] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.634282][ T7982] BTRFS info (device loop0): fs_info exclusive_operation: 3
  Failed to add device /dev/vda, errno 14
  [  416.636202][ T7983] BTRFS info (device loop0): fs_info exclusive_operation: 3
  [  416.637012][ T7984] BTRFS info (device loop0): fs_info exclusive_operation: 1
  Failed to add device /dev/vda, errno 14
  [  416.637759][ T7984] assertion failed: fs_info->exclusive_operation ==
  BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation ==
  BTRFS_EXCLOP_DEV_ADD || fs_info->exclusive_operation ==
  BTRFS_EXCLOP_NONE, in fs/btrfs/ioctl.c:458
  [  416.639845][ T7984] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  [  416.640485][ T7984] CPU: 0 PID: 7984 Comm: repro Not tainted 6.2.0 #7
  [  416.641172][ T7984] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
  [  416.642090][ T7984] RIP: 0010:btrfs_assertfail+0x2c/0x2e
  [  416.644423][ T7984] RSP: 0018:ffffc90003ea7e28 EFLAGS: 00010282
  [  416.645018][ T7984] RAX: 00000000000000cc RBX: 0000000000000000 RCX: 0000000000000000
  [  416.645763][ T7984] RDX: ffff88801d030000 RSI: ffffffff81637e7c RDI: fffff520007d4fb7
  [  416.646554][ T7984] RBP: ffffffff8a533de0 R08: 00000000000000cc R09: 0000000000000000
  [  416.647299][ T7984] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8a533da0
  [  416.648041][ T7984] R13: 00000000000001ca R14: 000000005000940a R15: 0000000000000000
  [  416.648785][ T7984] FS:  00007fa2985d4640(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000
  [  416.649616][ T7984] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  416.650238][ T7984] CR2: 0000000000000000 CR3: 0000000018e5e000 CR4: 0000000000750ef0
  [  416.650980][ T7984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [  416.651725][ T7984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [  416.652502][ T7984] PKRU: 55555554
  [  416.652888][ T7984] Call Trace:
  [  416.653241][ T7984]  <TASK>
  [  416.653527][ T7984]  btrfs_exclop_balance+0x240/0x410
  [  416.654036][ T7984]  ? memdup_user+0xab/0xc0
  [  416.654465][ T7984]  ? PTR_ERR+0x17/0x20
  [  416.654874][ T7984]  btrfs_ioctl_add_dev+0x2ee/0x320
  [  416.655380][ T7984]  btrfs_ioctl+0x9d5/0x10d0
  [  416.655822][ T7984]  ? btrfs_ioctl_encoded_write+0xb80/0xb80
  [  416.656400][ T7984]  __x64_sys_ioctl+0x197/0x210
  [  416.656874][ T7984]  do_syscall_64+0x3c/0xb0
  [  416.657346][ T7984]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [  416.657922][ T7984] RIP: 0033:0x4546af
  [  416.660170][ T7984] RSP: 002b:00007fa2985d4150 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [  416.660972][ T7984] RAX: ffffffffffffffda RBX: 00007fa2985d4640 RCX: 00000000004546af
  [  416.661714][ T7984] RDX: 0000000000000000 RSI: 000000005000940a RDI: 0000000000000003
  [  416.662449][ T7984] RBP: 00007fa2985d41d0 R08: 0000000000000000 R09: 00007ffee37a4c4f
  [  416.663195][ T7984] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa2985d4640
  [  416.663951][ T7984] R13: 0000000000000009 R14: 000000000041b320 R15: 00007fa297dd4000
  [  416.664703][ T7984]  </TASK>
  [  416.665040][ T7984] Modules linked in:
  [  416.665590][ T7984] ---[ end trace 0000000000000000 ]---
  [  416.666176][ T7984] RIP: 0010:btrfs_assertfail+0x2c/0x2e
  [  416.668775][ T7984] RSP: 0018:ffffc90003ea7e28 EFLAGS: 00010282
  [  416.669425][ T7984] RAX: 00000000000000cc RBX: 0000000000000000 RCX: 0000000000000000
  [  416.670235][ T7984] RDX: ffff88801d030000 RSI: ffffffff81637e7c RDI: fffff520007d4fb7
  [  416.671050][ T7984] RBP: ffffffff8a533de0 R08: 00000000000000cc R09: 0000000000000000
  [  416.671867][ T7984] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8a533da0
  [  416.672685][ T7984] R13: 00000000000001ca R14: 000000005000940a R15: 0000000000000000
  [  416.673501][ T7984] FS:  00007fa2985d4640(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000
  [  416.674425][ T7984] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  416.675114][ T7984] CR2: 0000000000000000 CR3: 0000000018e5e000 CR4: 0000000000750ef0
  [  416.675933][ T7984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [  416.676760][ T7984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Link: https://lore.kernel.org/linux-btrfs/20230324031611.98986-1-xiaoshoukui@gmail.com/
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Nxiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

A call to btrfs_prev_leaf() may end up returning a path that points to the
same item (key) again. This happens if while btrfs_prev_leaf(), after we
release the path, a concurrent insertion happens, which moves items off
from a sibling into the front of the previous leaf, and an item with the
computed previous key does not exists.

For example, suppose we have the two following leaves:

  Leaf A

  -------------------------------------------------------------
  | ...   key (300 96 10)   key (300 96 15)   key (300 96 16) |
  -------------------------------------------------------------
              slot 20             slot 21             slot 22

  Leaf B

  -------------------------------------------------------------
  | key (300 96 20)   key (300 96 21)   key (300 96 22)   ... |
  -------------------------------------------------------------
      slot 0             slot 1             slot 2

If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with
a path pointing to leaf B and slot 0 and the following happens:

1) At btrfs_prev_leaf() we compute the previous key to search as:
   (300 96 19), which is a key that does not exists in the tree;

2) Then we call btrfs_release_path() at btrfs_prev_leaf();

3) Some other task inserts a key at leaf A, that sorts before the key at
   slot 20, for example it has an objectid of 299. In order to make room
   for the new key, the key at slot 22 is moved to the front of leaf B.
   This happens at push_leaf_right(), called from split_leaf().

   After this leaf B now looks like:

  --------------------------------------------------------------------------------
  | key (300 96 16)    key (300 96 20)   key (300 96 21)   key (300 96 22)   ... |
  --------------------------------------------------------------------------------
       slot 0              slot 1             slot 2             slot 3

4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed
   previous key: (300 96 19). Since the key does not exists,
   btrfs_search_slot() returns 1 and with a path pointing to leaf B
   and slot 1, the item with key (300 96 20);

5) This makes btrfs_prev_leaf() return a path that points to slot 1 of
   leaf B, the same key as before it was called, since the key at slot 0
   of leaf B (300 96 16) is less than the computed previous key, which is
   (300 96 19);

6) As a consequence btrfs_previous_item() returns a path that points again
   to the item with key (300 96 20).

For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not
be functional a problem, despite not making sense to return a new path
pointing again to the same item/key. However for a caller such as
tree-log.c:log_dir_items(), this has a bad consequence, as it can result
in not logging some dir index deletions in case the directory is being
logged without holding the inode's VFS lock (logging triggered while
logging a child inode for example) - for the example scenario above, in
case the dir index keys 17, 18 and 19 were deleted in the current
transaction.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Fixes a bunch of warnings including:

  vmlinux.o: warning: objtool: select_reloc_root+0x314: unreachable instruction
  vmlinux.o: warning: objtool: finish_inode_if_needed+0x15b1: unreachable instruction
  vmlinux.o: warning: objtool: get_bio_sector_nr+0x259: unreachable instruction
  vmlinux.o: warning: objtool: raid_wait_read_end_io+0xc26: unreachable instruction
  vmlinux.o: warning: objtool: raid56_parity_alloc_scrub_rbio+0x37b: unreachable instruction
  ...
Reported-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302210709.IlXfgMpX-lkp@intel.com/Signed-off-by: NJosh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64).  As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).

../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
 2703 |   btrfs_setup_sprout(fs_info, seed_devices);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   70 |   (__if_trace.miss_hit[1]++,1) :  \
      |                                ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
 1878 |  u64 right_gen;
      |      ^~~~~~~~~
Reported-by: Nk2ci <kernel-bot@kylinos.cn>
Signed-off-by: NGenjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging dir dentries of a directory, we iterate over the subvolume
tree to find dir index keys on leaves modified in the current transaction.
This however is heavy on locking, since btrfs_search_forward() may often
keep locks on extent buffers for quite a while when walking the tree to
find a suitable leaf modified in the current transaction and with a key
not smaller than then the provided minimum key. That means it will block
other tasks trying to access the subvolume tree, which may be common fs
operations like creating, renaming, linking, unlinking, reflinking files,
etc.

A better solution is to iterate the log tree, since it's much smaller than
a subvolume tree and just use plain btrfs_search_slot() (or the wrapper
btrfs_for_each_slot()) and only contains dir index keys added in the
current transaction.

The following bonnie++ test on a non-debug kernel (with Debian's default
kernel config) on a 20G null block device, was used to measure the impact:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/nullb0
   MNT=/mnt/nullb0

   NR_DIRECTORIES=20
   NR_FILES=20480  # must be a multiple of 1024
   DATASET_SIZE=$(( (8 * 1024 * 1024 * 1024) / 1048576 )) # 8 GiB as megabytes
   DIRECTORY_SIZE=$(( DATASET_SIZE / NR_FILES ))
   NR_FILES=$(( NR_FILES / 1024 ))

   umount $DEV &> /dev/null
   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   bonnie++ -u root -d $MNT \
       -n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \
       -r 0 -s $DATASET_SIZE -b

   umount $MNT

Before patchset:

   Version 2.00a       ------Sequential Output------ --Sequential Input- --Random-
                       -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
   Name:Size etc        /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
   debian0          8G  376k  99  1.1g  98  939m  92 1527k  99  3.2g  99  9060 256
   Latency             24920us     207us     680ms    5594us     171us    2891us
   Version 2.00a       ------Sequential Create------ --------Random Create--------
   debian0             -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
                 files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 20/20 20480  96 +++++ +++ 20480  95 20480  99 +++++ +++ 20480  97
   Latency              8708us     137us    5128us    6743us      60us   19712us

After patchset:

   Version 2.00a       ------Sequential Output------ --Sequential Input- --Random-
                       -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
   Name:Size etc        /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
   debian0          8G  384k  99  1.2g  99  971m  91 1533k  99  3.3g  99  9180 309
   Latency             24930us     125us     661ms    5587us      46us    2020us
   Version 2.00a       ------Sequential Create------ --------Random Create--------
   debian0             -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
                 files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 20/20 20480  90 +++++ +++ 20480  99 20480  99 +++++ +++ 20480  97
   Latency              7030us      61us    1246us    4942us      56us   16855us

The patchset consists of this patch plus a previous one that has the
following subject:

   "btrfs: avoid iterating over all indexes when logging directory"
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging a directory, after copying all directory index items from the
subvolume tree to the log tree, we iterate over the subvolume tree to find
all dir index items that are located in leaves COWed (or created) in the
current transaction. If we keep logging a directory several times during
the same transaction, we end up iterating over the same dir index items
everytime we log the directory, wasting time and adding extra lock
contention on the subvolume tree.

So just keep track of the last logged dir index offset in order to start
the search for that index (+1) the next time the directory is logged, as
dir index values (key offsets) come from a monotonically increasing
counter.

The following test measures the difference before and after this change:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/nullb0
  MNT=/mnt/nullb0

  umount $DEV &> /dev/null
  mkfs.btrfs -f $DEV
  mount -o ssd $DEV $MNT

  # Time values in milliseconds.
  declare -a fsync_times
  # Total number of files added to the test directory.
  num_files=1000000
  # Fsync directory after every N files are added.
  fsync_period=100

  mkdir $MNT/testdir

  fsync_total_time=0
  for ((i = 1; i <= $num_files; i++)); do
        echo -n > $MNT/testdir/file_$i

        if [ $((i % fsync_period)) -eq 0 ]; then
                start=$(date +%s%N)
                xfs_io -c "fsync" $MNT/testdir
                end=$(date +%s%N)
                fsync_total_time=$((fsync_total_time + (end - start)))
                fsync_times[i]=$(( (end - start) / 1000000 ))
                echo -n -e "Progress $i / $num_files\r"
        fi
  done

  echo -e "\nHistogram of directory fsync duration in ms:\n"

  printf '%s\n' "${fsync_times[@]}" | \
     perl -MStatistics::Histogram -e '@d = <>; print get_histogram(\@d);'

  fsync_total_time=$((fsync_total_time / 1000000))
  echo -e "\nTotal time spent in fsync: $fsync_total_time ms\n"
  echo

  umount $MNT

The test was run on a non-debug kernel (Debian's default kernel config)
against a 15G null block device.

Result before this change:

   Histogram of directory fsync duration in ms:

   Count: 10000
   Range:  3.000 - 362.000; Mean: 34.556; Median: 31.000; Stddev: 25.751
   Percentiles:  90th: 71.000; 95th: 77.000; 99th: 81.000
      3.000 -    5.278:  1423 #################################
      5.278 -    8.854:  1173 ###########################
      8.854 -   14.467:   591 ##############
     14.467 -   23.277:  1025 #######################
     23.277 -   37.105:  1422 #################################
     37.105 -   58.809:  2036 ###############################################
     58.809 -   92.876:  2316 #####################################################
     92.876 -  146.346:     6 |
    146.346 -  230.271:     6 |
    230.271 -  362.000:     2 |

   Total time spent in fsync: 350527 ms

Result after this change:

   Histogram of directory fsync duration in ms:

   Count: 10000
   Range:  3.000 - 1088.000; Mean:  8.704; Median:  8.000; Stddev: 12.576
   Percentiles:  90th: 12.000; 95th: 14.000; 99th: 17.000
      3.000 -    6.007:  3222 #################################
      6.007 -   11.276:  5197 #####################################################
     11.276 -   20.506:  1551 ################
     20.506 -   36.674:    24 |
     36.674 -  201.552:     1 |
    201.552 -  353.841:     4 |
    353.841 - 1088.000:     1 |

   Total time spent in fsync: 92114 ms
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
Even before the scrub rework, if we have some corrupted metadata failed
to be repaired during replace, we still continue replacing and let it
finish just as there is nothing wrong:

 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1
 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752
 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1
 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished

This can lead to unexpected problems for the resulting filesystem.

[CAUSE]
Btrfs reuses scrub code path for dev-replace to iterate all dev extents.
But unlike scrub, dev-replace doesn't really bother to check the scrub
progress, which records all the errors found during replace.

And even if we check the progress, we cannot really determine which
errors are minor, which are critical just by the plain numbers.
(remember we don't treat metadata/data checksum error differently).

This behavior is there from the very beginning.

[FIX]
Instead of continuing the replace, just error out if we hit an
unrepaired metadata sector.

Now the dev-replace would be rejected with -EIO, to let the user know.
Although it also means, the filesystem has some metadata error which
cannot be repaired, the user would be upset anyway.

The new dmesg would look like this:

 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560
 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752
 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's pointless to have a while loop at btrfs_get_next_valid_item(), as if
the slot on the current leaf is beyond the last item, we call
btrfs_next_leaf(), which leaves us at a valid slot of the next leaf (or
a valid slot in the current leaf if after releasing the path an item gets
pushed from the next leaf to the current leaf).

So just call btrfs_next_leaf() if the current slot on the current leaf is
beyond the last item.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY.  Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.

This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.

Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.

This check should be backported for all supported kernels before any new
scrub flags are introduced.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.

Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.

CC: stable@vger.kernel.org # 6.2+
Reviewed-by: NNeal Gompa <neal@gompa.dev>
Signed-off-by: NBoris Burkov <boris@bur.io>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.

Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.

Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: NBoris Burkov <boris@bur.io>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since the scrub rework, the following RAID56 functions are no longer
called:

- raid56_add_scrub_pages()
- raid56_alloc_missing_rbio()
- raid56_submit_missing_rbio()

Those functions are all utilized by scrub to handle missing device cases
for RAID56.

However the new scrub code handle them in a completely different way:

- If it's data stripe, go recovery path through btrfs_submit_bio()
- If it's P/Q stripe, it would be handled through
  raid56_parity_submit_scrub_rbio()
  And that function would handle dev-replace and repair properly.

Thus we can safely remove those functions.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since scrub path has been fully moved to scrub_stripe based facilities,
no more scrub_bio would be submitted.
Thus we can remove it completely, this involves:

- SCRUB_SECTORS_PER_BIO macro
- SCRUB_BIOS_PER_SCTX macro
- SCRUB_MAX_PAGES macro
- BTRFS_MAX_MIRRORS macro
- scrub_bio structure
- scrub_ctx::bios member
- scrub_ctx::curr member
- scrub_ctx::bios_in_flight member
- scrub_ctx::workers_pending member
- scrub_ctx::list_lock member
- scrub_ctx::list_wait member

- function scrub_bio_end_io_worker()
- function scrub_pending_bio_inc()
- function scrub_pending_bio_dec()
- function scrub_throttle()
- function scrub_submit()

- function scrub_find_csum()
- function drop_csum_range()

- Some unnecessary flush and scrub pauses
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Those two structures are used to represent a bunch of sectors for scrub,
but now they are fully replaced by scrub_stripe in one go, so we can
remove them. This involves:

- structure scrub_block
- structure scrub_sector

- structure scrub_page_private
- function attach_scrub_page_private()
- function detach_scrub_page_private()
  Now we no longer need to use page::private to handle subpage.

- function alloc_scrub_block()
- function alloc_scrub_sector()
- function scrub_sector_get_page()
- function scrub_sector_get_page_offset()
- function scrub_sector_get_kaddr()
- function bio_add_scrub_sector()

- function scrub_checksum_data()
- function scrub_checksum_tree_block()
- function scrub_checksum_super()
- function scrub_check_fsid()
- function scrub_block_get()
- function scrub_block_put()
- function scrub_sector_get()
- function scrub_sector_put()
- function scrub_bio_end_io()
- function scrub_block_complete()
- function scrub_add_sector_to_rd_bio()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The old scrub code has different entrance to verify the content, and
since we have removed the writeback path, now we can start removing the
re-check part, including:

- scrub_recover structure
- scrub_sector::recover member
- function scrub_setup_recheck_block()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_group_good_copy()
- function scrub_repair_sector_from_good_copy()
- function scrub_is_page_on_raid56()

- function full_stripe_lock()
- function search_full_stripe_lock()
- function get_full_stripe_logical()
- function insert_full_stripe_lock()
- function lock_full_stripe()
- function unlock_full_stripe()
- btrfs_block_group::full_stripe_locks_root member
- btrfs_full_stripe_locks_tree structure
  This infrastructure is to ensure RAID56 scrub is properly handling
  recovery and P/Q scrub correctly.

  This is no longer needed, before P/Q scrub we will wait for all
  the involved data stripes to be scrubbed first, and RAID56 code has
  internal lock to ensure no race in the same full stripe.

- function scrub_print_warning()
- function scrub_get_recover()
- function scrub_put_recover()
- function scrub_handle_errored_block()
- function scrub_setup_recheck_block()
- function scrub_bio_wait_endio()
- function scrub_submit_raid56_bio_wait()
- function scrub_recheck_block_on_raid56()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_from_good_copy()
- function scrub_repair_sector_from_good_copy()

And two more functions exported temporarily for later cleanup:

- alloc_scrub_sector()
- alloc_scrub_block()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since the whole scrub path has been switched to scrub_stripe based
solution, the old writeback path can be removed completely, which
involves:

- scrub_ctx::wr_curr_bio member
- scrub_ctx::flush_all_writes member
- function scrub_write_block_to_dev_replace()
- function scrub_write_sector_to_dev_replace()
- function scrub_add_sector_to_wr_bio()
- function scrub_wr_submit()
- function scrub_wr_bio_end_io()
- function scrub_wr_bio_end_io_worker()

And one more function needs to be exported temporarily:

- scrub_sector_get()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The structure scrub_parity is used to indicate that some extents are
scrubbed for the purpose of RAID56 P/Q scrubbing.

Since the whole RAID56 P/Q scrubbing path has been replaced with new
scrub_stripe infrastructure, and we no longer need to use scrub_parity
to modify the behavior of data stripes, we can remove it completely.

This removal involves:

- scrub_parity_workers
  Now only one worker would be utilized, scrub_workers, to do the read
  and repair.
  All writeback would happen at the main scrub thread.

- scrub_block::sparity member
- scrub_parity structure
- function scrub_parity_get()
- function scrub_parity_put()
- function scrub_free_parity()

- function __scrub_mark_bitmap()
- function scrub_parity_mark_sectors_error()
- function scrub_parity_mark_sectors_data()
  These helpers are no longer needed, scrub_stripe has its bitmaps and
  we can use bitmap helpers to get the error/data status.

- scrub_parity_bio_endio()
- scrub_parity_check_and_repair()
- function scrub_sectors_for_parity()
- function scrub_extent_for_parity()
- function scrub_raid56_data_stripe_for_parity()
- function scrub_raid56_parity()
  The new code would reuse the scrub read-repair and writeback path.
  Just skip the dev-replace phase.
  And scrub_stripe infrastructure allows us to submit and wait for those
  data stripes before scrubbing P/Q, without extra infrastructure.

The following two functions are temporarily exported for later cleanup:

- scrub_find_csum()
- scrub_add_sector_to_rd_bio()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Implement the only missing part for scrub: RAID56 P/Q stripe scrub.

The workflow is pretty straightforward for the new function,
scrub_raid56_parity_stripe():

- Go through the regular scrub path for each data stripe

- Wait for the verification and repair to finish

- Writeback the repaired sectors to data stripes

- Make sure all stripes are properly repaired
  If we have sectors unrepaired, we cannot continue, or we could further
  corrupt the P/Q stripe.

- Submit the rbio for P/Q stripe
  The dev-replace would be handled inside
  raid56_parity_submit_scrub_rbio() path.

- Wait for the above bio to finish

Although the old code is no longer used, we still keep the declaration,
as the cleanup can be several times larger than this patch itself.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Switch scrub_simple_mirror() to the new scrub_stripe infrastructure.

Since scrub_simple_mirror() is the core part of scrub (only RAID56
P/Q stripes don't utilize it), we can get rid of a big chunk of code,
mostly scrub_extent(), scrub_sectors() and directly called functions.

There is a functionality change:

- Scrub speed throttle now only affects read on the scrubbing device
  Writes (for repair and replace), and reads from other mirrors won't
  be limited by the set limits.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper, queue_scrub_stripe(), would try to queue a stripe for
scrub.  If all stripes are already in use, we will submit all the
existing ones and wait for them to finish.

Currently we would queue up to 8 stripes, to enlarge the blocksize to
512KiB to improve the performance. Sectors repaired on zoned need to be
relocated instead of in-place fix.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper, scrub_stripe_report_errors(), will report the result of
the scrub to system log.

The main reporting is done by introducing a new helper,
scrub_print_common_warning(), which is mostly the same content from
scrub_print_wanring(), but without the need for a scrub_block.

Since we're reporting the errors, it's the perfect time to update the
scrub stats too.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add a new helper, scrub_write_sectors(), to submit write bios for
specified sectors to the target disk.

There are several differences compared to read path:

- Utilize btrfs_submit_scrub_write()
  Now we still rely on the @mirror_num based writeback, but the
  requirement is also a little different than regular writeback or read,
  thus we have to call btrfs_submit_scrub_write().

- We cannot write the full stripe back
  We can only write the sectors we have.  There will be two call sites
  later, one for repaired sectors, one for all utilized sectors of
  dev-replace.

  Thus the callers should specify their own write_bitmap.

This function only submit the bios, will not wait for them unless for
zoned case.

Caller must explicitly wait for the IO to finish.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper, scrub_stripe_read_repair_worker(), would handle the
read-repair part:

- Wait for the previous submitted read IO to finish

- Verify the contents of the stripe

- Go through the remaining mirrors, using as large blocksize as possible
  At this stage, we just read out all the failed sectors from each
  mirror and re-verify.
  If no more failed sector, we can exit.

- Go through all mirrors again, sector-by-sector
  This time, we read sector by sector, this is to address cases where
  one bad sector mismatches the drive's internal checksum, and cause the
  whole read range to fail.

  We put this recovery method as the last resort, as sector-by-sector
  reading is slow, and reading from other mirrors may have already fixed
  the errors.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper, scrub_verify_stripe(), shares the same main workflow of
the old scrub code.

The major differences are:

- How pages/page_offset is grabbed
  Everything can be grabbed from scrub_stripe easily.

- When error report happens
  Currently the helper only verifies the sectors, not really doing any
  error reporting.
  The error reporting would be done after we have done the repair.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper, scrub_verify_one_metadata(), is almost the same as
scrub_checksum_tree_block().

The difference is in how we grab the pages from other structures.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The new helper will search the extent tree to find the first extent of a
logical range, then fill the sectors array by two loops:

- Loop 1 to fill common bits and metadata generation

- Loop 2 to fill csum data (only for data bgs)
  This loop will use the new btrfs_lookup_csums_bitmap() to fill
  the full csum buffer, and set scrub_sector_verification::csum.

With all the needed info filled by this function, later we only need to
submit and verify the stripe.

Here we temporarily export the helper to avoid warning on unused static
function.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch introduces the following structures:

- scrub_sector_verification
  Contains all the needed info to verify one sector (data or metadata).

- scrub_stripe
  Contains all needed members (mostly bitmap based) to scrub one stripe
  (with a length of BTRFS_STRIPE_LEN).

The basic idea is, we keep the existing per-device scrub behavior, but
merge all the scrub_bio/scrub_bio into one generic structure, and read
the full BTRFS_STRIPE_LEN stripe on the first try.

This means we will read some sectors which are not scrub target, but
that's fine. At dev-replace time we only writeback the utilized and good
sectors, and for read-repair we only writeback the repaired sectors.

With every read submitted in BTRFS_STRIPE_LEN, the need for complex bio
form shaping would be gone.
Although to get the same performance of the old scrub behavior, we would
need to submit the initial read for two stripes at once.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Both scrub and read-repair are utilizing a special repair writes that:

- Only writes back to a single device
  Even for read-repair on RAID56, we only update the corrupted data
  stripe itself, not triggering the full RMW path.

- Requires a valid @mirror_num
  For RAID56 case, only @mirror_num == 1 is valid.
  For non-RAID56 cases, we need @mirror_num to locate our stripe.

- No data csum generation needed

These two call sites still have some differences though:

- Read-repair goes plain bio
  It doesn't need a full btrfs_bio, and goes submit_bio_wait().

- New scrub repair would go btrfs_bio
  To simplify both read and write path.

So here this patch would:

- Introduce a common helper, btrfs_map_repair_block()
  Due to the single device nature, we can use an on-stack
  btrfs_io_stripe to pass device and its physical bytenr.

- Introduce a new interface, btrfs_submit_repair_bio(), for later scrub
  code
  This is for the incoming scrub code.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we're doing a lot of work for btrfs_bio:

- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios

However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.

Thus here we do the following changes:

- Introduce btrfs_bio::fs_info
  This is for the new scrub specific btrfs_bio, which would not populate
  btrfs_bio::inode.
  Thus we need such new member to grab a fs_info

  This new member will always be populated.

- Replace @inode argument with @fs_info for btrfs_bio_init() and its
  caller
  Since @inode is no longer a mandatory member, replace it with
  @fs_info, and let involved users populate @inode.

- Skip checksum verification and generation if @bbio->inode is NULL

- Add extra ASSERT()s
  To make sure:

  * bbio->inode is properly set for involved read repair path
  * if @file_offset is set, bbio->inode is also populated

- Grab @fs_info from @bbio directly
  We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
  NULL. This involves:

  * btrfs_simple_end_io()
  * should_async_write()
  * btrfs_wq_submit_bio()
  * btrfs_use_zone_append()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is really no need to go through the super complex scrub_sectors()
to just handle super blocks.  Introduce a dedicated function to handle
super block scrubbing.

This new function will introduce a behavior change, instead of using the
complex but concurrent scrub_bio system, here we just go submit-and-wait.

There is really not much sense to care the performance of super block
scrubbing. It only has 3 super blocks at most, and they are all
scattered around the devices already.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 321f69f8 ("btrfs: reset device back to allocation state when
removing") included adding extent_io_tree_release(&device->alloc_state)
to btrfs_close_one_device(), which had already been called in
btrfs_free_device().

The alloc_state tree (IO_TREE_DEVICE_ALLOC_STATE), is created in
btrfs_alloc_device() and released in btrfs_close_one_device(). Therefore,
the additional call to extent_io_tree_release(&device->alloc_state) in
btrfs_free_device() is unnecessary and can be removed.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

During my recent search for the root cause of a reported bug, I realized
that it's a good idea to issue a warning for missed cleanup instead of
using debug-only assertions. Since most installations run with debug off,
missed cleanups and premature calls to close could go unnoticed. However,
these issues are serious enough to warrant reporting and fixing.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This was only ever used by btrfs, and the usage just went away.
This effectively reverts df91f56a ("libcrc32c: Add crc32c_impl
function").
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>