- 19 4月, 2016 1 次提交
-
-
由 Takashi Iwai 提交于
The "Line In->Rear Out Switch" control on ens1371 driver returns a bogus value, always true, as its check is totally broken. Fix it to check the proper GPIO bit mask. Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 1月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
Nowadays it's recommended. Replace all in a shot. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 1月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
This is a similar cleanup like the commit [3db084fd: ALSA: fm801: PCI core handles power state for us]. Since pci_set_power_state(), pci_save_state() and pci_restore_state() are already done in the PCI core side, so we don't need to it doubly. Also, pci_enable_device(), pci_disable_device() and pci_set_master() calls in PM callbacks are superfluous nowadays, too, so get rid of them as well. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 1月, 2015 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The various PCM and MIDI allocation functions in this driver take a pointer to a pointer of a PCM/MIDI object where if this parameter is provided the newly allocated object is stored. All callers pass NULL though, so remove the parameter. This makes the code a bit shorter and cleaner. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 26 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 8月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Using 0x%# emits 0x0x. Only one is necessary. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 6月, 2013 1 次提交
-
-
由 Yijing Wang 提交于
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 5月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 9月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
A few files have been slipped from the previous commit to add MONO channel type. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2012 2 次提交
-
-
由 Takashi Iwai 提交于
Provide channel maps for individual stereo streams of ENS1370 and ENS1371. Note that the configuration of ENS1370 uses the secondary PCM as the front unlike ENS1371. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
... just by defining CHIP_NAME and string concats. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 8月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Otherwise we may get compile warnings due to unused functions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 7月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2011 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 10 6月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 3月, 2011 1 次提交
-
-
由 Clemens Ladisch 提交于
To make the EV1938 chip work, add a magic bit and an extra delay. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Tested-by: NTino Schmidt <mailtinoshomepage@gmx.net> Cc: all 2.6.x <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 2月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2009 2 次提交
-
-
由 Joe Perches 提交于
Here's a patch on top of the others to use CREATIVE and ECTIVA Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 7月, 2008 2 次提交
-
-
由 Rene Herman 提交于
communicate the ES137x PCI device to the AC97 code for its subsys_vendor/device values Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rene Herman 提交于
Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2008 2 次提交
-
-
由 Jeff Garzik 提交于
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Harvey Harrison 提交于
index is incremented only when AC97_EI_SPDIF and then assigned to the index field. Change the temporary name to is_spdif. sound/pci/ens1370.c:1638:10: warning: symbol 'index' shadows an earlier one sound/pci/ens1370.c:84:12: originally declared here Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 2 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 7月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Fix ensoniq driver sections when HOTPLUG=n, but code is used during resume, so it cannot be discarded: WARNING: sound/pci/snd-ens1371.o(.text+0x5c0): Section mismatch: reference to .init.text: (between 'snd_ensoniq_chip_init' and 'snd_ensoniq_free') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 12 7月, 2007 1 次提交
-
-
由 Auke Kok 提交于
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 5月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 2月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up quirks in snd-ens1371 driver using snd_pci_quirk_lookup(). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 12月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-