This patch removes legacy EINT initialization code that was used to
handle external interrupts when booting with ATAGS, which is not
supported any more.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch removes legacy PMU initialization code that was used to set
up PMU when booting with ATAGS, which is not supported any more.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As we discussed in mailing list, non-DT for EXYNOS SoCs will not be
supported from v3.11. This patch removes regarding files for non-DT
including board files and defconfig.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled.  Avoid this hang by calling
debug_ll_io_init() early.

Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io().  After this patch the hang goes away.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch fixes software reset logic. Software reset applies only to
powered-on domains in SOC because software reset to all domains causes
reboot failure.
Signed-off-by: NJungseok Lee <jays.lee@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch extends exynos_init_time() function to handle Exynos4210
rev0 SoC, which differs in availability of system timers and needs
different clocksource initialization.

This makes it possible to use exynos_init_time() function as init_time
callback for all Exynos-based boards, including Universal_C210, which
originally had to use samsung_timer_init().
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch removes legacy PWM timer interrupt initialization from
exynos{4,5}_init_irq() functions, since it conflicts with internal
interrupt handling of the new PWM clocksource driver.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This reverts commit bd51de53.

Turns out that multiplatform breaks some uses cases, such as when you
have an existing defconfig, since it adds the new EXYNOS_SINGLE config
option as a dependecy. As a result, nearly all exynos config options
will be disabled by default.

Reverting instead of rebasing since this branch is pulled in as a
dependency elsewhere.
Signed-off-by: NOlof Johansson <olof@lixom.net>

On device tree enabled exynos platforms, retrieve the physical base address
of the chip-id controller from device tree and create a virtual I/O mapping
for the chip-id controller. This helps to remove the chip-id controller entry
from the statically defined I/O mapping tables.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The platform code knows the IRQ base, while the irqchip driver
should really not. This is a littly hacky because we still
hardwire the IRQ base to 160 for the combiner in the DT case,
when we should really use -1. Removing that line will cause
a linear IRQ domain to be use, as we should.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>

We can find out the number of combined IRQs from the device
tree, but in case of ATAGS boot, the driver currently uses
hardcoded values based on the SoC type. We can't do that
in general for a multiplatform kernel, so let's instead pass
this information from platform code directly in case of
ATAGS boot.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>

For the non-DT case, the mct_init() function requires access
to a couple of platform specific constants, but cannot include
the header files in case we are building for multiplatform.

This changes the interface to the platform so we pass all
the necessary data as arguments to mct_init.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>

The new common clock drivers for exynos are using compile
time constants and soc_is_exynos* macros to provide backwards
compatibility for pre-DT systems, which is not possible with
multiplatform kernels. This moves all the necessary
information back into platform code and removes the mach/*
header inclusions.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Mike Turquette <mturquette@linaro.org>

This makes it possible to enable the exynos platform as part of a
multiplatform kernel, in addition to keeping the single-platform
exynos support.

The multiplatform variant has a number of limitations at the moment:

* It only supports DT-enabled machines. This is not a problem in
  the long run, as non-DT machines for exynos are going away.
  The main problem here is that the gpio code and the exynos_eint
  irqchip are not multiplatform capable but still required for
  ATAGS based boot.
* The watchdog driver is still missing a conversion.
* sparsemem and memory_holes are currently not supported in
  multiplatform.

The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled
for now, as dependent patches are still pending in other
subsystem trees. We will enable it once everything comes together.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

On TrustZone-enabled boards the non-secure SYSRAM is used for secondary
CPU bring-up, so add a mapping for it.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch defines irq numbers of ARM performance monitoring unit for exynos4.
Firs of all, we need to fix IRQ_PMU correctly and to split pmu initialization
of exynos from plat-samsung for easily defining it.

The number of CPU cores and PMU irq numbers are vary according to soc types.
So, we need to identify each soc type using soc_is_xxx function and to define
the pmu irqs dynamically. For example, the exynos4412 has 4 cpu cores and pmus.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The functions exynos4_clk_init and exynos4_clk_register_fixed_ext
are applicable only on Exynos4 non-dt platforms. But when building
Exynos5 platforms without including Exynos4 platforms, the following
errors show up.

arch/arm/mach-exynos/built-in.o: In function `exynos_init_time':
arch/arm/mach-exynos/common.c:446: undefined reference to `exynos4_clk_init'
arch/arm/mach-exynos/common.c:447: undefined reference to `exynos4_clk_register_fixed_ext'

Fix this compilation errors by marking these calls as Exynos4 specific.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

These functions have been introduced by commit 10a8c383 (irq: introduce
entry and exit functions for chained handlers) in asm/mach/irq.h. This
patch moves them to linux/irqchip/chained_irq.h so that generic irqchip
drivers do not rely on architecture specific header files.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>

The clock speed of xxti and xusbxti clocks depends on the oscillator
used on the board to generate these clocks. For non-dt platforms,
allow the board support for those platforms to set the clock frequency
of xxti and xusbxti clocks.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since the clock initialization should be completed prior to the mct
timer initialization, create a new function 'exynos_init_time' that
first sets up the clock and then invokes the timer initialization
function. The 'init_time' callback in the board files are updated to
invoke this new wrapper function.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Remove Samsung specific clock support in Exynos4/5 and migrate to
use common clock framework.
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Remove duplicated include.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With device tree support enabled for MCT controller, the
staticio-remapping of the MCT controller address space is
removed for Exynos5 platforms (which supports only device
tree based boot).

Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Set the gic arch extension callback to support rtc wakeup.
Signed-off-by: NInderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Skip the wakeup interrupt registration for Exynos5250 if pinctrl support
is enabled for Exynos5250.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos boot is broken with commit 0529e315 (ARM: use common irqchip_init
for GIC init). This commit split the irqchip initialization into 2 calls
to of_irq_init. This does not work because of_irq_init requires interrupt
parents to be in the match list.

Rather than reverting exynos changes, make it do the proper thing by using
IRQCHIP_DECLARE. This requires moving the combiner code to drivers/irqchip.
Reported-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NOlof Johansson <olof@lixom.net>

The soft-reset control register is located in the XMU controller space.
Map this controller space before writing to the soft-reset controller
register.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NGirish K S <ks.giri@samsung.com>
Signed-off-by: NKukjin <kgene.kim@samsung.com>

Fix the incorrect compatible property value of pinctrl for EXYNOS4 SoCs.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Now that we have GIC moved to drivers/irqchip and all GIC DT init for
platforms using irqchip_init, move gic.h and update the remaining
includes.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>

Convert all GIC DT initialization over to use common irqchip_init
function.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since exynos5440 can support only common clk stuff, so this
patch skips legacy exynos5 clock initialization.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The recent commit "ARM: EXYNOS: add support for EXYNOS5440 SoC" broke
support for exynos5250 because of_machine_is_compatible() was used too
early in the boot process.  It also probably meant that the exynos5440
failed to use the proper iotable.  Switch to use
of_flat_dt_is_compatible() in both of these cases.

The failure I was seeing in exynos5250 because of this was:
  Division by zero in kernel.
  [<80015ed4>] (unwind_backtrace+0x0/0xec) from [<8045c7a4>] (dump_stack+0x20/0x24)
  [<8045c7a4>] (dump_stack+0x20/0x24) from [<80012990>] (__div0+0x20/0x28)
  [<80012990>] (__div0+0x20/0x28) from [<8021ab04>] (Ldiv0_64+0x8/0x18)
  [<8021ab04>] (Ldiv0_64+0x8/0x18) from [<80068560>] (__clocksource_updatefreq_scale+0x54/0x134)
  [<80068560>] (__clocksource_updatefreq_scale+0x54/0x134) from [<8006865c>] (__clocksource_register_scale+0x1c/0x54)
  [<8006865c>] (__clocksource_register_scale+0x1c/0x54) from [<80612a18>] (exynos_timer_init+0x100/0x1e8)
  [<80612a18>] (exynos_timer_init+0x100/0x1e8) from [<8060d184>] (time_init+0x28/0x38)
  [<8060d184>] (time_init+0x28/0x38) from [<8060a754>] (start_kernel+0x1e0/0x3c8)
  [<8060a754>] (start_kernel+0x1e0/0x3c8) from [<40008078>] (0x40008078)
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
[olofj: fixed two build errors, one missing include and one !CONFIG_OF failure]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Set the gic arch extension callback to support rtc wakeup.
Signed-off-by: NInderpal Singh <inderpal.singh@samsung.com>
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support for EXYNOS5440 SoC which is including
ARM Cortex-A15 Quad cores.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

chained_irq_enter/exit() already mask&ack/unmask the chained interrupt.
There is no need to also explicitly do it in the handler.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Acked-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

All EXYNOS5 based platforms support only device tree based boot and so the
unused non-dt code that sets i2c0 resource information and device names for
sdhci and i2c platform devices are removed.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Silences the following warning:
arch/arm/mach-exynos/common.c:576:12: warning:
symbol 'combiner_of_init' was not declared. Should it be static?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch modifies the old wakeup interrupt initialization code to
detect pinctrl driver by using for_each_matching_node instead of
for_each_compatible_node and adds match table for both EXYNOS4210 and
EXYNOS4X12.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>