Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR
in ISA 3.0 hypervisor mode.

SPRN_PSSCR_PR is the privileged mode access and is used when we are
not in hypervisor mode.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and
IAMR SPRs based on their supported ISA revisions.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

ISA 3.0 defines hypervisor decrementer to be 64 bits in length.
This patch extends the print format for to be 64 bits.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove unneeded variables and assignments.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When we map memory at boot we print out the ranges of real addresses
that we mapped and the page size that was used.

Currently it's a bit ugly:

  Mapped range 0x0 - 0x2000000000 with 0x40000000
  Mapped range 0x200000000000 - 0x202000000000 with 0x40000000

Pad the addresses so they line up, and print the page size using
actual units, eg:

  Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
  Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
  Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Make the printks look a bit nicer by adding a prefix.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For a PCI device it's pci_dn can be retrieved from
pdev->dev.archdata.firmware_data, PCI_DN(devnode), or parent's list.
Thus, we should just use the existing function pci_get_pdn_by_devfn
to get the pci_dn.
Signed-off-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We need to add memory barrier so that the page table walk doesn't happen
before the cpumask is set and made visible to the other cpus. We need
to use a sync here instead of lwsync because lwsync is not sufficient for
store/load ordering.

We also need to add an if (mm) check so that we do the right thing when called
with a kernel context. For kernel context, we have mm = NULL. W.r.t kernel
address we can skip setting the mm cpumask.

Fixes: 0f4bc093 ("powerpc/mm/cxl: Add the fault handling cpu to mm cpumask")
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define interfaces (wrappers) to the 'copy' and 'paste'
instructions (which are new in PowerISA 3.0). These are intended to be
used to by NX driver(s) to submit Coprocessor Request Blocks (CRBs) to
the NX hardware engines.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define an interface to open a VAS send window. This interface is
intended to be used the Nest Accelerator (NX) driver(s) to open
a send window and use it to submit compression/encryption requests
to a VAS receive window.

The receive window, identified by the [vasid, cop] parameters, must
already be open in VAS (i.e connected to an NX engine).
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define the vas_win_close() interface which should be used to close a
send or receive windows.

While the hardware configurations required to open send and receive
windows differ, the configuration to close a window is the same for
both. So we use a single interface to close the window.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define the vas_rx_win_open() interface. This interface is intended to
be used by the Nest Accelerator (NX) driver(s) to setup receive
windows for one or more NX engines (which implement compression &
encryption algorithms in the hardware).

Follow-on patches will provide an interface to close the window and to
open a send window that kernel subsystems can use to access the NX
engines.

The interface to open a receive window is expected to be invoked for
each instance of VAS in the system.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define helpers to allocate/free VAS window objects. These will be used
in follow-on patches when opening/closing windows.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define helpers to initialize window context registers of the VAS
hardware. These will be used in follow-on patches when opening/closing
VAS windows.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define some helper functions to access the MMIO regions. We use these
in follow-on patches to read/write VAS hardware registers. They are
also used to later issue 'paste' instructions to submit requests to
the NX hardware engines.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Implement vas_init() and vas_exit() functions for a new VAS module.
This VAS module is essentially a library for other device drivers
and kernel users of the NX coprocessors like NX-842 and NX-GZIP.
In the future this will be extended to add support for user space
to access the NX coprocessors.

VAS is currently only supported with 64K page size.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.

There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Define macros for the VAS hardware registers and bit-fields as well
as couple of data structures needed by the VAS driver.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fixup include guard to use _ASM_POWERPC_VAS_H]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and
effectively print only the last 32 bits.

Fixes: 1846193b ("powerpc/xmon: Dump ISA 2.06 SPRs")
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The check_req() helper uses pci_get_pdn() to get an OF node pointer.
pci_get_pdn() returns a pci_dn pointer which either:
1) from the OF node returned by pci_device_to_OF_node();
2) from the parent child_list where entries don't have OF node pointers.
Since check_req() does not care about 2), it can call
pci_device_to_OF_node() directly, hence the change.

The find_pe_dn() helper uses embedded pci_dn to get an OF node which is
also stored in edev->pdev so let's take a shortcut and call
pci_device_to_OF_node() directly.

With these 2 changes, we can finally get rid of the OF node back pointer.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pci_dn struct caches a OF device node pointer in order to access
the "ibm,loc-code" property when EEH is recovering.

However, when this happens in eeh_dev_check_failure(), we also have
a pci_dev pointer which should have a valid pointer to the device node
when pci_dn has one (both pointers are not NULL for physical functions
and are NULL for virtual functions).

This changes pci_remove_device_node_info() to look for a parent of
the node being removed, just like pci_add_device_node_info() does when it
references the parent node.

This is the first step to get rid of pci_dn::node.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The eeh_dev struct hold a config space address of an associated node
and the very same address is also stored in the pci_dn struct which
is always present during the eeh_dev lifetime.

This uses bus:devfn directly from pci_dn instead of cached and packed
config_addr.

Since config_addr is made from device's bus:dev.fn, there is no point
in keeping it in the debugfs either so remove that too.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The eeh_dev struct already holds a pointer to pci_dn which it does not
exist without and pci_dn itself holds the very same pointer so just
use it.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

arch/powerpc/kernel/eeh_dev.c:57 is the only legit place where edev
is allocated; other 2 places allocate it on stack and in the heap for
a very short period of time to use eeh_pe_get() as takes edev.

This changes eeh_pe_get() to receive required parameters explicitly.

This removes unnecessary temporary allocation of edev.

This uses the "pe_no" name instead of the "pe_config_addr" name as
it actually is a PE number and not a config space address as it seemed.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

pdev is always NULL, remove it.

To make checkpatch.pl happy, this also removes the "out of memory"
message.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

clk_div_tables are not supposed to change at runtime.
mpc512x_clk_divtable function working with const clk_div_table. So
mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

My static checker complains that 0x00001800 >> 13 is zero. Looking at
the context, it seems like a copy and paste bug from the line below
and probably 0x3 << 13 or 0x00006000 was intended.

Fixes: 2af59f7d ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There is a cut and paste error here so we use sizeof(struct mpc83xx_pmc)
to remap the memory for "clock_regs". That sizeof() is 20 bytes and we
only need to remap 12 bytes. It presumably doesn't affect run time too
much...

I changed them to both use sizeof(*variable_name) because that's the
preferred kernel style these days.

Fixes: d49747bd ("powerpc/mpc83xx: Power Management support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
[mpe: It will map at least one page anyway, but still a good cleanup]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use nmi_enter similarly to system reset interrupts. This uses NMI
printk NMI buffers and turns off various debugging facilities that
helps avoid tripping on ourselves or other CPUs.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There are quite a few machine check exceptions that can be caused by
kernel bugs. To make debugging easier, use the kernel crash path in
cases of synchronous machine checks that occur in kernel mode, if that
would not result in the machine going straight to panic or crash dump.

There is a downside here that die()ing the process in kernel mode can
still leave the system unstable. panic_on_oops will always force the
system to fail-stop, so systems where that behaviour is important will
still do the right thing.

As a test, when triggering an i-side 0111b error (ifetch from foreign
address) in kernel mode process context on POWER9, the kernel currently
dies quickly like this:

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
  [  127.426651616,0] OPAL: Reboot requested due to Platform error.
      Effective[  127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000
  opal: Reboot type 1 not supported
  Kernel panic - not syncing: PowerNV Unrecovered Machine Check
  CPU: 56 PID: 4425 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a26-dirty #35
  Call Trace:
  [  128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to
    buggy/mising code in OPAL for this BMC
    Rebooting in 10 seconds..
  Trying to free IRQ 496 from IRQ context!

After this patch, the process is killed and the kernel continues with
this message, which gives enough information to identify the offending
branch (i.e., with CFAR):

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
      Effective address: ffff000000000000
  Oops: Machine check, sig: 7 [#1]
  SMP NR_CPUS=2048
  NUMA
  PowerNV
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ...
  CPU: 22 PID: 4436 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a26-dirty #36
  task: c000000932300000 task.stack: c000000932380000
  NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000
  REGS: c00000000fc8fd80 TRAP: 0200   Tainted: G   M             (4.12.0-rc1-13857-ga4700a26-dirty)
  MSR: 90000000001c1003 <SF,HV,ME,RI,LE>
    CR: 24000484  XER: 20000000
  CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1
  GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000
  GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8
  GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030
  GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918
  NIP [ffff000000000000] 0xffff000000000000
  LR [00000000217706a4] 0x217706a4
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Unrecovered MCE and HMI errors are sent through a special restart OPAL
call to log the platform error. The downside is that they don't go
through normal Linux crash paths, so they don't give much information
to the Linux console.

Change this by providing a special crash function which does some of
the console flushing from the panic() path before calling firmware to
reboot.

The downside of this is a little more code to execute before reaching
the firmware reboot. However in practice, it's critical to get the
Linux console messages output in order to debug a problem. So this is
a desirable tradeoff.

Note on the implementation: It is difficult to plumb a custom reboot
handler into the panic path, because panic does a little bit too much
work. For example, it will try to delay with the timebase, but that
may be corrupted in some cases resulting in a hang without reaching
the platform reboot. Another problem is that panic can invoke the
crash dump code which is not what we want in the case of a hardware
platform error. Long-term the best solution will be to rework the
panic path so it can be suitable for this kind of panic, but for now
we just duplicate a bit of the code.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A system reset is a request to crash / debug the system rather than
necessarily caused by encountering a BUG. So there is no need to
serialize all CPUs behind the die lock, adding taints to all
subsequent traces beyond the first, breaking console locks, etc.

The system reset is NMI context which has its own printk buffers to
prevent output being interleaved. Then it's better to have all
secondaries print out their debug as quickly as possible and the
primary will flush out all printk buffers during panic().

So remove the 0x100 path from die, and move it into system_reset. Name
the crash/dump reasons "System Reset".

This gives "not tained" traces when crashing an untainted kernel. It
also gives the panic reason as "System Reset" as opposed to "Fatal
exception in interrupt" (or "die oops" for fadump).
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Some PowerVM firmware when delivering a system reset interrupt to a
little endian OS will mess up SRR registers. They are byteswapped, and
SRR1 is incorrect. An example from a crash:

  NIP: 14dd0900000000c0
  MSR: 1000000200000080

It's possible to detect this pattern in SRR1 (that would never happen
in normal operation), and at least fix the NIP. After this patch, the
same interrupt reports NIP properly:

  NIP [c00000000009dd14] plpar_hcall_norets+0x1c/0x28
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

If fadump is not registered, and no other crash or debug handlers are
registered, the powerpc panic handler stops the guest before the
generic panic code can push out debug information to the console.

Currently, system reset injection causes the guest to silently stop.

Stop calling ppc_md.panic in the panic notifier. crash_fadump already
does rtas_os_term() to terminate the guest if fadump is registered.

Remove ppc_md.panic. Move fadump panic notifier into fadump code.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This fixes a couple more bits of fallout from the new hard lockup watchdog
patch.

It restores the required hw_nmi_get_sample_period() function for the
perf watchdog, and removes some function declarations on 64e that are only
defined for 64s. This fixes the 64e build when the hardlockup detector is
enabled.

It restores the default behaviour of disabling the perf watchdog, and also
fixes disabling the 64s watchdog when running as a guest.

Fixes: 2104180a ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These are unused in radix mode.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Radix MMU does not take SLB or TLB interrupts when accessing kernel
linear address. Remove this restriction for radix mode.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove incorrect comment about real mode address restrictions on
powernv (bare metal), and unnecessary clamping to ppc64_rma_size.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The hardware can execute stop in any context, and KVM does not
require real mode because siblings do not share MMU state. This
saves a switch to real-mode when going idle.
Acked-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There are no longer any callers of IDLE_STATE_ENTER_SEQ, all callers
use IDLE_STATE_ENTER_SEQ_NORET. So drop the former.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch, write change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>