- 25 5月, 2015 22 次提交
-
-
由 Linus Walleij 提交于
As can be seen from the datasheet of the CoreSight Components, DDI0401C A.1.1 the ETM has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks. The ATCLK is enabled and disabled using the runtime PM callbacks. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will unprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will unprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as clk_disable_unprepare() was not called. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will unprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will unprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will unprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
The Ux500 has a PrimeCell version 4B instead of the 3B as supported by the driver, extend the match table to cover this version. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Walleij 提交于
Helpfully report a bit more about the hardware found in the silicon when matching the AMBA device IDs by using the associated .data pointer in the AMBA match. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathieu Poirier 提交于
Using function "module_amba_driver()" makes the code simpler by eliminating boilerplate code. Wei Yongjun sent out a set of patches addressing those in all the coresight driver but missed ETMv3. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathieu Poirier 提交于
ETM ID registers contain valuable information about the capabilities of the implementation and are very useful when configuring the device for various trace scenarios. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathieu Poirier 提交于
Having access to the ETMv4 management registers is very useful as they give meaningful information on how the IP block has been configured at synthesis time. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to access and configure specifics about the virtual machine ID comparator functions. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to access and configure specifics about the context ID comparator functions. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to control the selection of the resources the trace unit will use as triggers to perform a trace run. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries related to the counter functionality, more specifically to set, control and reload the counters. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to access the sequencers related registers, more specifically the sequencer state, the sequencer state transition and the sequencer reset control registers. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to control the various mode the address comparator registers can enact, i.e, start/top, single, and range. Also supplementing with address comparator types configuration registers access, mandatory to complete the configuration of the comparator functions. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to control the ViewInst register's event selector along with secure and non-secure exception level instruction tracing. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to configure: . global timestamp. . how often trace synchronisation occur. . the threashold value for cycle counting. . branch and broadcasting regions. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Adding sysfs entries to: . set the tracing entity with default values. . set various mode associated to the tracing entity. . select the processing entity the tracing entity relates to. . select various events of interest. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
Tracers can be configured with various options at synthesis time and knowing what resources are available is important for SW configuration purposes. As such adding RO sysfs entries for characteristics related to the tracer implementation. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pratik Patel 提交于
This driver manages the CoreSight ETMv4 (Embedded Trace Macrocell) IP block to support HW assisted tracing on ARMv7 and ARMv8 architectures. Signed-off-by: NPratik Patel <pratikp@codeaurora.org> Signed-off-by: NKaixu Xia <xiakaixu@huawei.com> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 5月, 2015 5 次提交
-
-
由 Mark Brown 提交于
We attempt to sanity check the buffer depth reported by the hardware by making sure it is not less than zero however this check will never be true since the buffer depth is stored in an unsigned integer. Instead change the check to look for the top bit being set which was the intention. Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mark Brown 提交于
When we initialise the ETB driver we attempt to allocate a buffer suitable for storing the data buffered in the hardware based on sizing information reported by the hardware. Unfortunately if the hardware is not properly configured (for example if power domains are not set up correctly) then we may read back a nonsensically large value and therefore the allocation will be too big to succeed. Print an error message showing the amount of memory we tried to allocate if the buffer allocation fails to help users diagnose such problems. Normally it is bad practice to print an error message on memory allocation failures since there are verbose core messages reported for this but in this case where the allocation size might be incorrect it is a useful hint. Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Torvalds 提交于
-
由 Peter Zijlstra 提交于
Two watchdog changes that came through different trees had a non conflicting conflict, that is, one changed the semantics of a variable but no actual code conflict happened. So the merge appeared fine, but the resulting code did not behave as expected. Commit 195daf66 ("watchdog: enable the new user interface of the watchdog mechanism") changes the semantics of watchdog_user_enabled, which thereafter is only used by the functions introduced by b3738d29 ("watchdog: Add watchdog enable/disable all functions"). There further appears to be a distinct lack of serialization between setting and using watchdog_enabled, so perhaps we should wrap the {en,dis}able_all() things in watchdog_proc_mutex. This patch fixes a s2r failure reported by Michal; which I cannot readily explain. But this does make the code internally consistent again. Reported-and-tested-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
-
- 17 5月, 2015 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.1-rc4. All are pretty minor, and have been in linux-next successfully" * tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices Added another USB product ID for ELAN touchscreen quirks. xhci: gracefully handle xhci_irq dead device xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 xhci: fix isoc endpoint dequeue from advancing too far on transaction error usb: chipidea: debug: avoid out of bound read USB: visor: Match I330 phone more precisely USB: pl2303: Remove support for Samsung I330 USB: cp210x: add ID for KCF Technologies PRN device usb: gadget: remove incorrect __init/__exit annotations usb: phy: isp1301: work around tps65010 dependency usb: gadget: serial: fix re-ordering of tx data usb: gadget: hid: Fix static variable usage usb: gadget: configfs: Fix interfaces array NULL-termination usb: gadget: xilinx: fix devm_ioremap_resource() check usb: dwc3: dwc3-omap: correct the register macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging / IIO driver fixes from Greg KH: "Here's some staging and iio driver fixes to resolve a number of reported issues. All of these have been in linux-next for a while" * tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits) iio: light: hid-sensor-prox: Fix memory leak in probe() iio: adc: cc10001: Add delay before setting START bit iio: adc: cc10001: Fix regulator_get_voltage() return value check iio: adc: cc10001: Fix incorrect use of power-up/power-down register staging: gdm724x: Correction of variable usage after applying ALIGN() iio: adc: cc10001: Fix the channel number mapping staging: vt6655: lock MACvWriteBSSIDAddress. staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC staging: vt6655: Fix 80211 control and management status reporting. staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe staging: vt6656: use ieee80211_tx_info to select packet type. staging: rtl8712: freeing an ERR_PTR staging: sm750: remove incorrect __exit annotation iio: kfifo: Set update_needed to false only if a buffer was allocated iio: mcp320x: Fix occasional incorrect readings iio: accel: mma9553: check input value for activity period iio: accel: mma9553: add enable channel for activity iio: accel: mma9551_core: prevent buffer overrun ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fix from Greg KH: "Here is one fix, in the extcon subsystem, that resolves a reported issue. It's been in linux-next for a number of weeks now, sorry for not getting it to you sooner" * tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: usb-gpio: register extcon device before IRQ registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML hostfs fix from Richard Weinberger: "This contains a single fix for a regression introduced in 4.1-rc1" * 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: hostfs: Use correct mask for file mode
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI bufix from Richard Weinberger: "This contains a single bug fix for the UBI block driver" * tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs: UBI: block: Add missing cache flushes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Fix a number of ext4 bugs; the most serious of which is a bug in the lazytime mount optimization code where we could end up updating the timestamps to the wrong inode" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix an ext3 collapse range regression in xfstests jbd2: fix r_count overflows leading to buffer overflow in journal recovery ext4: check for zero length extent explicitly ext4: fix NULL pointer dereference when journal restart fails ext4: remove unused function prototype from ext4.h ext4: don't save the error information if the block device is read-only ext4: fix lazytime optimization
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "The first commit is a fix from Filipe for a very old extent buffer reuse race that triggered a BUG_ON. It hasn't come up often, I looked through old logs at FB and we hit it a handful of times over the last year. The rest are other corners he hit during testing" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON Btrfs: fix race between block group creation and their cache writeout Btrfs: fix panic when starting bg cache writeout after IO error Btrfs: fix crash after inode cache writeback failure
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Seven small fixes. The shortlog below is a good description so no need to elaborate. It has sat in linux-next and survived the usual automated testing by Imagination's test farm" * 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlb-r4k: Fix PG_ELPA comment MIPS: Fix up obsolete cpu_set usage MIPS: IP32: Fix build errors in reset code in DS1685 platform hook. MIPS: KVM: Fix unused variable build warning MIPS: traps: remove extra Tainted: line from __show_regs() output MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1 MIPS: Fix a preemption issue with thread's FPU defaults
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta. * tag 'arc-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: inline cache flush toggle helpers ARC: With earlycon in use, retire EARLY_PRINTK ARC: unbork !LLSC build
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Nothing frightening this time, just smaller fixes in a number of places. The other changes contained here are: MAINTAINERS file updates: - The mach-gemini maintainer is back in action and has a new git tree - Krzysztof Kozlowski has volunteered to be a new co-maintainer for the samsung platforms - updates to the files that belong to Marvell mvebu Bug fixes: - The largest changes are on omap2, but are only to avoid some harmless warnings and to fix reset on omap4 - a small regression fix on tegra - multiple fixes for incorrect IRQ affinity on vexpress - the missing system controller on arm64 juno is added - one revert of a patch that was accidentally applied twice for mach-rockchip - two clock related DT fixes for mvebu - a workaround for suspend with old DT binaries on new exynos kernels - Another fix for suspend on exynos, needs to be backported" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) MAINTAINERS: Add dts entries for some of the Marvell SoCs MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4 ARM: EXYNOS: Fix failed second suspend on Exynos4 Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs" ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider ARM: EXYNOS: Don't try to initialize suspend on old DT ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards ARM: gemini: fix compiler warning due wrong data type ARM: vexpress/tc2: Add interrupt-affinity to the PMU node ARM: vexpress/ca9: Add interrupt-affinity to the PMU node ARM: vexpress/ca9: Add unified-cache property to l2 cache node ARM64: juno: add sp810 support and fix sp804 clock frequency ARM: Gemini: Maintainers update ARM: OMAP2+: Remove bogus struct clk comparison for timer clock ARM: dove: Add clock-names to CuBox Si5351 clk generator ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality ARM: OMAP4+: PRM: add support for passing status register/bit info to reset ARM: AM43xx: hwmod: add VPFE hwmod entries ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal fixes from Zhang Rui: "Specifics: - fix an issue in intel_powerclamp driver that idle injection target is not accurately maintained on newer Intel CPUs. Package C8 to C10 states are introduced on these CPUs but they were not included in the package c-state residency calculation. From Jacob Pan. - fix a problem that package c-state idle injection was missing on Broadwell server, by adding its id to intel_powerclamp driver. From Jacob Pan. - a couple of small fixes and cleanups from Joe Perches, Mathias Krause, Dan Carpenter and Anand Moon" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tools/thermal: tmon: fixed the 'make install' command thermal: rockchip: fix an error code thermal/powerclamp: fix missing newer package c-states thermal/intel_powerclamp: add id for broadwell server thermal/intel_powerclamp: add __init / __exit annotations thermal: Use bool function return values of true/false not 1/0
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new x86 test due to its hard dependency on 32-bit build environment. A set of 5 patches fix the make kselftest run and kselftest install" * tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests, x86: Rework x86 target architecture detection selftests, x86: Remove useless run_tests rule selftests/x86: install tests selftest/x86: have no dependency on all when cross building selftest/x86: build both bitnesses
-