This adds support for another model of IRTOUCH SYSTEMS Co.,LtD infrared
touchscreens. The USB vendorID/deviceID is 6615/0012. It is also sold
under the label "Elektrosil".

The datasheet states that coordinates for x and y are in the range from
0 to 32767.
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add initial version of the Broadcom touchscreen driver.
Reviewed-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Tested-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NJonathan Richardson <jonathar@broadcom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This commit introduces two new optional device-tree properties:
"tp-sensitive-adjust": adjust sensitivity of pen down detection
"filter-type": select median and averaging filter

The previous fixed defaults, didn't work well for the Olimex
A13-LCD10TS (I have).
Signed-off-by: NJens Thiele <karme@karme.de>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NCourtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: NIvan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This change fixes a style issue where spaces where used instead of tabs.
Signed-off-by: NBrian K. Turner <turnerbk84@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: 6696777c ("Input: add driver for Elan I2C/SMbus touchpad")
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

of_device_id is always used as const argument (See driver.of_match_table
and open firmware functions).
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This reverts commit 6ab17a84 since it,
according to Benjamin, causes issues with slot assignment:

E: 15.669119 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 15.954242 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 15.954242 0003 0039 0505     # EV_ABS / ABS_MT_TRACKING_ID   505
E: 15.954242 0003 0035 3851     # EV_ABS / ABS_MT_POSITION_X    3851
E: 15.954242 0003 0036 4076     # EV_ABS / ABS_MT_POSITION_Y    4076
E: 15.954242 0003 003a 0034     # EV_ABS / ABS_MT_PRESSURE      34
E: 15.954242 0001 014a 0001     # EV_KEY / BTN_TOUCH            1
E: 15.954242 0003 0000 3851     # EV_ABS / ABS_X                3851
E: 15.954242 0003 0001 4076     # EV_ABS / ABS_Y                4076
E: 15.954242 0003 0018 0034     # EV_ABS / ABS_PRESSURE         34
E: 15.954242 0001 0145 0001     # EV_KEY / BTN_TOOL_FINGER      1
E: 15.954242 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
... (bunch of regular events)...
E: 16.020614 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.043601 0003 0035 3873     # EV_ABS / ABS_MT_POSITION_X    3873
E: 16.043601 0003 0036 3903     # EV_ABS / ABS_MT_POSITION_Y    3903
E: 16.043601 0003 003a 0050     # EV_ABS / ABS_MT_PRESSURE      50
E: 16.043601 0003 0035 3032     # EV_ABS / ABS_MT_POSITION_X    3032
E: 16.043601 0003 0036 3832     # EV_ABS / ABS_MT_POSITION_Y    3832
E: 16.043601 0003 003a 0044     # EV_ABS / ABS_MT_PRESSURE      44
E: 16.043601 0003 0000 3032     # EV_ABS / ABS_X                3032
E: 16.043601 0003 0001 3832     # EV_ABS / ABS_Y                3832
E: 16.043601 0003 0018 0044     # EV_ABS / ABS_PRESSURE         44
E: 16.043601 0001 0145 0000     # EV_KEY / BTN_TOOL_FINGER      0
E: 16.043601 0001 014d 0001     # EV_KEY / BTN_TOOL_DOUBLETAP   1
E: 16.043601 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.068837 0003 002f 0001     # EV_ABS / ABS_MT_SLOT          1
E: 16.068837 0003 0039 0506     # EV_ABS / ABS_MT_TRACKING_ID   506
E: 16.068837 0003 0035 3912     # EV_ABS / ABS_MT_POSITION_X    3912
E: 16.068837 0003 0036 3743     # EV_ABS / ABS_MT_POSITION_Y    3743
E: 16.068837 0003 003a 0056     # EV_ABS / ABS_MT_PRESSURE      56
E: 16.068837 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 16.068837 0003 0035 3026     # EV_ABS / ABS_MT_POSITION_X    3026
E: 16.068837 0003 0036 3708     # EV_ABS / ABS_MT_POSITION_Y    3708
E: 16.068837 0003 003a 0052     # EV_ABS / ABS_MT_PRESSURE      52
E: 16.068837 0003 0000 3026     # EV_ABS / ABS_X                3026
E: 16.068837 0003 0001 3708     # EV_ABS / ABS_Y                3708
E: 16.068837 0003 0018 0052     # EV_ABS / ABS_PRESSURE         52
E: 16.068837 0000 0000 0000     # ------------ SYN_REPORT (0) ----------

Slot 0 and 1 gets inverted in the second report above, which
introduces a cursor jump. The problem is that this cursor jump is
often enough to leave the current widget, and X sends the
scrolling events to whoever is now under the cursor.
Reported-by: NBenjamin Tissoires <btissoir@redhat.com>
Reported-by: NHans de Goede <hdegoede@redhat.com>

Calling pwm_config() with a period equal to zero always results in
error (-EINVAL) and pwm chip config method is never called.
Signed-off-by: NOlivier Sobrie <olivier@sobrie.be>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The commit titled: "Input: sun4i-ts -  A10 (sun4i) has a different
temperature curve" contains a math error, the offset it uses is in degrees,
but the actual code applies the offset before multiplying by stepsize :|

Given that this is rather backwards (every math course ever thought applies
the multiplication before the offset for linear functions), this commit
fixes things by changing the code applying the offset to do the logical
thing, adjusting the offset for the other models accordingly.

This has been tested on an A10, A13, A20 and A31 to make sure everything
really is correct now.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

"irqsrc" needs to be signed for the error handling to work.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Currently the elants_i2c driver simply requests a static filename
/lib/firmware/elants_i2c.bin when it gets firmware updates.  This is a
problem if you have two Elan touchscreens using the same driver.  If both
touchscreens have different firmwares, you would need to move the files
around in your filesystem when you're updating them so that they don't get
updated with the other's FW.  If you have a read-only filesystem then this
is impossible, even.

This patch changes the elants_i2c driver to automatically append the
four-hex-digit hw_version of the device onto the name of the FW file it's
requesting for update.  Since different touchscreens should have a
different hw_version's this means the user needs to append the hw version
of the touchscreen he or she intends to update onto the end of the firmware
filename and then the driver will do the rest.

The firmware filenames it looks for now are of the form:

  elants_i2c_${HW_VERSION}.bin

  eg:

  elants_i2c_2a44.bin
Signed-off-by: NCharlie Mooney <charliemooney@chromium.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

While registering serio device for i8042, mark them as wakeup-capable
and check their user space wakeup settings in i8042_pm_suspend() and
i8042_pm_resume() to enable or disable, respectively, their interrupts
to wake up the system.

This makes it possible to use the PC keyboard to wake up the system
from suspend-to-idle, among other things, after writing "enabled" to
the keyboard serio device's power/wakeup sysfs attribute.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Lenovo X250 has a PnpID of LEN0046, but it does not have the top software
button requirement.

For the record, Lenovo T450s and W541 have a PnpID of LEN200f and LEN004a,
so they are not on the top software button list.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDaniel Martin <consume.noise@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Lenovo decided to switch back to physical buttons for the trackstick on
their latest series. The PNPId list was provided before they reverted back
to physical buttons, so it contains the new models too.  We can know from
the touchpad capabilities that the touchpad has physical buttons, so
removing the ids from the list is not mandatory. It is still nicer to
remove the wrong ids, so start by removing the X1 Carbon 3rd gen, with the
PNPId of LEN0048.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The 2015 series of the Lenovo thinkpads added back the hardware buttons on
top of the touchpad for the trackstick.

Unfortunately, they are wired to the touchpad, and not the trackstick.
Thus, they are seen as extra buttons from the kernel point of view.

This leads to a problem in user space because extra buttons on synaptics
devices used to be used as scroll up/down buttons. So in the end, the
experience for the user is scroll events for buttons left and right when
using the trackstick. Yay!

Fortunately, the firmware advertises such behavior in the extended
capability $10, and so we can re-route the buttons through the pass-through
interface.
Hallelujah-expressed-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The 2015 series of the Lenovo thinkpads added back the hardware buttons on
top of the touchpad for the trackstick.

Unfortunately, Lenovo used the PNPIDs that are supposed to be "5 buttons"
touchpads, so the new laptops also have the INPUT_PROP_TOPBUTTONPAD. Yay!

Instead of manually removing each of the new ones, or hoping that we know
all the current ones, we can consider that the PNPIDs list that were given
contains touchpads that have the trackstick buttons, either physically
wired to them, or emulated with the top software button property.

Thanks to the extra buttons capability in query $10, we can reliably detect
the physical buttons from the software ones, and so we can remove the
TOPBUTTONPAD property even if it was declared as such.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Newer Synaptics touchpads need to get information from the query $10.
Retrieve it if available.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The board id capability has been added in firmware 7.5.

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The Fimware 8.1 has a bug in which the extra buttons are only sent when the
ExtBit is 1.  This should be fixed in a future FW update which should have
a bump of the minor version.

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle
button of the trackstick (attached to the touchpad serio device, of course)
seems to get lost.

Actually, the touchpads reports 3 extra buttons, which falls in the switch
below to the '2' case. Let's handle the case of odd numbers also, so that
the middle button finds its way back.

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Post-2013 Lenovo laptops provide correct min/max dimensions, which are
different with the ones currently quirked.  According to
https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids
are assigned in the post-2013 touchpads:

t440p/t440s: LEN0036 -> 2964/2962
t540p:       LEN0034 -> 2964

Using 2961 as the common minimum makes these 3 laptops OK. We may need
to update those values later if other pnp_ids has a lower board_id.

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add a min/max range for board ids to the min/max coordinates quirk. This
makes it possible to restrict quirks to specific models based upon their
board id. The define ANY_BOARD_ID (0) serves as a wild card.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Martin <daniel.martin@secunet.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The firmware of the X240 (LEN0035, 2013/12) exposes the same values
    x [1232..5710], y [1156..4696]
as the quirk applies.

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Martin <consume.noise@gmail.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Query the min dimensions even if the check
SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the
firmware version 8.1 is safe.

With that we don't need quirks for post-2013 models anymore as they expose
correct min and max dimensions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Martin <consume.noise@gmail.com>
  re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Logging the dimension values we queried and the values we use from a quirk
to overwrite can be helpful for debugging.

This partly relates to bug:
    https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Martin <consume.noise@gmail.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Split the function synaptics_resolution() into synaptics_resolution() and
synaptics_quirks().  synaptics_resolution() will be called before
synaptics_quirks() to query dimensions and resolutions before overwriting
them with quirks.

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Martin <consume.noise@gmail.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Testing has revealed that the temperature in the rtp controller of the A10
(sun4i) SoC has a different curve then on the A13 (sun5i) and later models.

Add a new sun5i-a13-ts compatible to differentiate the newer models and
set the curve based on the compatible string.

The new curve is still not ideal on all A10-s, that seems to have to
do with there being a large spread between different A10-s out there,
the new curve us based on callibration results on 4 completely different
models:
                        raw min raw max temp min temp max stepsize offset
Tong Zhang's hackberry    2402    2680    45.0     80.0    0.125   -255.3
Hansg's Cubieboard        2207    2300    36.0     45.0    0.096   -175.8
Olliver's lime 1 (*):     2258    2537    48.3     87.1    0.139   -265.7
Olliver's lime 2 (*):     2222    2486    46.7     91.7    0.170   -331.0
*) from: http://linux-sunxi.org/Temperature_Calibration

Average all 4:                                             0.133   -257.0
Average without outliers (middle 2):                       0.132   -261.0

Since it is better to slightly overreport the temperature this patch uses
the average of all 4 as curve.

This fixes the temperature reported on the A10 being much higher then
expected.
Reported-by: NTong Zhang <lovewilliam@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Remove duplicate "repeat--" from function elan_initialize.
Signed-off-by: NDuson Lin <dusonlin@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In order to better diagnose potential issues let's return error to the
upper layers when resuming the device fails and also add a few diagnostic
messages.
Signed-off-by: NDuson Lin <dusonlin@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The device->pm pointer is always present so there is no need to do tricks with
conditionally defining the pointer.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Apparently, the threshold for large contact area seems to be rather low on
some devices, causing the touchpad to frequently freeze during normal
usage. Because we do now know how we are supposed to use the value in
question, this commit just drops the related code completely.
Signed-off-by: NMathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

These PS/2 commands make some touchpads stop responding, so this commit
adds some dummy functions to replace the generic implementation. Because
scale changes were not encapsulated in a method of struct psmouse yet, this
commit adds a method set_scale to psmouse.
Signed-off-by: NMathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

We don't know whether x_max or y_max really hold the maximum possible
coordinates, and we don't know for sure whether we correctly interpret the
coordinates sent by the touchpad, so we clamp the reported values to
prevent confusion in userspace code.
Signed-off-by: NMathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The size has in most cases already been fetched from the touchpad, the
hardcoded values should have been removed.
Signed-off-by: NMathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This change adds device tree support and binding information for Goodix
GT9xx series touchscreen controller.  It also adds support for 5-finger
chips, like GT911 and GT912, which can be found on ARM tablets, such as
Wexler TAB7200 and MSI Primo73.

Datasheets can be found here:
https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharingSigned-off-by: NAleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use max number of touches from device config instead of hardcoding.
Signed-off-by: NAleksei Mamlin <mamlinav@gmail.com>
Tested-by: NBastien Nocera <hadess@hadess.net>
Acked-by: NBastien Nocera <hadess@hadess.net>
Tested-by: NAntonio Ospite <ao2@ao2.it>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

According to Synaptics devices with ForcePads use SYN300D and SYN3014 as
PNP IDs, so let's switch from DMI-bases detection scheme to PNP-based
one, which should be more reliable.
Suggested-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

PNP IDs are supposed to be case-insensitive and so we should compare
them as such.
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>