Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.

  =============================================================================
  BUG kmalloc-16 (Not tainted): Redzone overwritten
  -----------------------------------------------------------------------------

  Disabling lock debugging due to kernel taint
  INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
  INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
  INFO: Object 0x6f171df3 @offset=352 fp=0x00000000

  Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
  Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69  ........snrub.fi
  Redzone 79e69a6f: 73 68 32 0a                                      sh2.
  Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
  CPU: 0 PID: 8196 Comm: attr Tainted: G    B             5.9.0-rc8+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
  Call Trace:
   dump_stack+0x54/0x6e
   print_trailer+0x12c/0x134
   check_bytes_and_report.cold+0x3e/0x69
   check_object+0x18c/0x250
   free_debug_processing+0xfe/0x230
   __slab_free+0x1c0/0x300
   kfree+0x1d3/0x220
   smb2_set_ea+0x27d/0x540
   cifs_xattr_set+0x57f/0x620
   __vfs_setxattr+0x4e/0x60
   __vfs_setxattr_noperm+0x4e/0x100
   __vfs_setxattr_locked+0xae/0xd0
   vfs_setxattr+0x4e/0xe0
   setxattr+0x12c/0x1a0
   path_setxattr+0xa4/0xc0
   __ia32_sys_lsetxattr+0x1d/0x20
   __do_fast_syscall_32+0x40/0x70
   do_fast_syscall_32+0x29/0x60
   do_SYSENTER_32+0x15/0x20
   entry_SYSENTER_32+0x9f/0xf2

Fixes: 5517554e ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: NVladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

read permission, not just read attributes permission, is required
on the directory.

See MS-SMB2 (protocol specification) section 3.3.5.19.
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.6+
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

When punch hole success, we also can read old data from file:
  # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \
           -c "fpunch 20 40" -c"pread 20 40" file
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
  fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40

CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page caches not updated, then the
local page caches inconsistent with server.

Also can be found by xfstests generic/316.

So, we need to remove the page caches before send the SMB
ioctl(FSCTL_SET_ZERO_DATA) to server.

Fixes: 31742c5a ("enable fallocate punch hole ("fallocate -p") for SMB3")
Suggested-by: NPavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NZhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: NSteve French <stfrench@microsoft.com>

CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page cache not update, then the data
inconsistent with server, which leads the xfstest generic/008 failed.

So we need to remove the local page caches before send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will
re-cache it.

Fixes: 30175628 ("[SMB3] Enable fallocate -z support for SMB3 mounts")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: NSteve French <stfrench@microsoft.com>

open_shroot() invokes kref_get(), which increases the refcount of the
"tcon->crfid" object. When open_shroot() returns not zero, it means the
open operation failed and close_shroot() will not be called to decrement
the refcount of the "tcon->crfid".

The reference counting issue happens in one normal path of
open_shroot(). When the cached root have been opened successfully in a
concurrent process, the function increases the refcount and jump to
"oshr_free" to return. However the current return value "rc" may not
equal to 0, thus the increased refcount will not be balanced outside the
function, causing a refcnt leak.

Fix this issue by setting the value of "rc" to 0 before jumping to
"oshr_free" label.
Signed-off-by: NXiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: NXin Tan <tanxin.ctf@gmail.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:

- credit handling is done with the server that will actually be used
  to send.
  * ->wait_mtu_credit
  * ->set_credits / set_credits
  * ->add_credits / add_credits
  * add_credits_and_wake_if

- potential reconnection (smb2_reconnect) done when initializing a
  request is checked and done with the server that will actually be
  used to send.

To do this:

- remove the cifs_pick_channel() call out of compound_send_recv()

- select channel and pass it down by adding a cifs_pick_channel(ses)
  call in:
  - smb311_posix_mkdir
  - SMB2_open
  - SMB2_ioctl
  - __SMB2_close
  - query_info
  - SMB2_change_notify
  - SMB2_flush
  - smb2_async_readv  (if none provided in context param)
  - SMB2_read         (if none provided in context param)
  - smb2_async_writev (if none provided in context param)
  - SMB2_write        (if none provided in context param)
  - SMB2_query_directory
  - send_set_info
  - SMB2_oplock_break
  - SMB311_posix_qfs_info
  - SMB2_QFS_info
  - SMB2_QFS_attr
  - smb2_lockv
  - SMB2_lease_break
    - smb2_compound_op
  - smb2_set_ea
  - smb2_ioctl_query_info
  - smb2_query_dir_first
  - smb2_query_info_comound
  - smb2_query_symlink
  - cifs_writepages
  - cifs_write_from_iter
  - cifs_send_async_read
  - cifs_read
  - cifs_readpages

- add TCP_Server_Info *server param argument to:
  - cifs_send_recv
  - compound_send_recv
  - SMB2_open_init
  - SMB2_query_info_init
  - SMB2_set_info_init
  - SMB2_close_init
  - SMB2_ioctl_init
  - smb2_iotcl_req_init
  - SMB2_query_directory_init
  - SMB2_notify_init
  - SMB2_flush_init
  - build_qfs_info_req
  - smb2_hdr_assemble
  - smb2_reconnect
  - fill_small_buf
  - smb2_plain_req_init
  - __smb2_plain_req_init

The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:

- cifs_writepages      (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages       (rdata)
- cifs_send_async_read (rdata)

The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.

Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.

- SMB2_negotiate         (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo              (uses provided one)
- SMB2_logoff            (uses master)
- SMB2_tdis              (uses master)

(list not exhaustive)
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

SMB2_read/SMB2_write check and use cifs_io_parms->server, which might
be uninitialized memory.

This change makes all callers zero-initialize the struct.
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling.  Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.deSigned-off-by: NTheodore Ts'o <tytso@mit.edu>

Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range.  This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.deSigned-off-by: NTheodore Ts'o <tytso@mit.edu>

No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRitesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.deSigned-off-by: NTheodore Ts'o <tytso@mit.edu>

Use pr_fmt to standardize all logging for fs/cifs.

Some logging output had no CIFS: specific prefix.

Now all output has one of three prefixes:

o CIFS:
o CIFS: VFS:
o Root-CIFS:

Miscellanea:

o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Move some large data structures off the stack and into dynamically
allocated memory in the function smb2_ioctl_query_info
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

SMB2_open_init() expects a pre-initialised lease_key when opening a
file with a lease, so set pfid->lease_key prior to calling it in
open_shroot().

This issue was observed when performing some DFS failover tests and
the lease key was never randomly generated.
Signed-off-by: NPaulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>

The packet size needs to take account of SMB2 header size and possible
encryption header size. This is only done when signing is used and it is for
RDMA send/receive, not read/write.

Also remove the dead SMBD code in smb2_negotiate_r(w)size.
Signed-off-by: NLong Li <longli@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

xfstests generic/228 checks if fallocate respect RLIMIT_FSIZE.
After fallocate mode 0 extending enabled, we can hit this failure.
Fix this by check the new file size with vfs helper, return
error if file size is larger then RLIMIT_FSIZE(ulimit -f).

This patch has been tested by LTP/xfstests aginst samba and
Windows server.
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NMurphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

allows SMB2_open() callers to pass down a POSIX data buffer that will
trigger requesting POSIX create context and parsing the response into
the provided buffer.
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPaulo Alcantara (SUSE) <pc@cjr.nz>

This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: NStefan Metzmacher <metze@samba.org>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.

Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: NMurphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>

The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...

Open files: 0 total (local), 1 open on server
                             ^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.

In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.

I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.

I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: NShyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.

We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.

To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.

The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.

Simple reproducer:

	#include <stdio.h>
	#include <stdlib.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <fcntl.h>
	#include <unistd.h>
	#define E(s) perror(s), exit(1)

	int main(int argc, char *argv[])
	{
		int fd, ret;
		if (argc != 3) {
			fprintf(stderr, "Usage: %s A B\n"
			"create&open A in write mode, "
			"rename A to B, close A\n", argv[0]);
			return 0;
		}

		fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
		if (fd == -1) E("openat()");

		ret = rename(argv[1], argv[2]);
		if (ret) E("rename()");

		ret = close(fd);
		if (ret) E("close()");

		return ret;
	}

$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied

Fixes: 8de9e86c ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: NPaulo Alcantara (SUSE) <pc@cjr.nz>

RHBZ: 1752437

Before we add a new EA we should check that this will not overflow
the maximum buffer we have available to read the EAs back.
Otherwise we can get into a situation where the EAs are so big that
we can not read them back to the client and thus we can not list EAs
anymore or delete them.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

It was originally enabled only for SMB3 or later dialects, but
had requests to add it to SMB2.1 mounts as well given the
large number of systems at that dialect level.
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reported-by: NL Walsh <cifs@tlinx.org>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>

A commonly used SMB3 feature is change notification, allowing an
app to be notified about changes to a directory. The SMB3
Notify request blocks until the server detects a change to that
directory or its contents that matches the completion flags
that were passed in and the "watch_tree" flag (which indicates
whether subdirectories under this directory should be also
included).  See MS-SMB2 2.2.35 for additional detail.

To use this simply pass in the following structure to ioctl:

 struct __attribute__((__packed__)) smb3_notify {
        uint32_t completion_filter;
        bool    watch_tree;
 } __packed;

 using CIFS_IOC_NOTIFY  0x4005cf09
 or equivalently _IOW(CIFS_IOCTL_MAGIC, 9, struct smb3_notify)

SMB3 change notification is supported by all major servers.
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Acked-by: NPaulo Alcantara (SUSE) <pc@cjr.nz>

Add check for null cifs_sb to create_options helper
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>

When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.

Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

RHBZ 1336264

When we extend a file we must also force the size to be updated.

This fixes an issue with holetest in xfs-tests which performs the following
sequence :
1, create a new file
2, use fallocate mode==0 to populate the file
3, mmap the file
4, touch each page by reading the mmapped region.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Fix two places where we need to adjust down the max response size for
ioctl when it is used together with compounding.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>

Combine the initial SMB2_Open and the first SMB2_Query_Directory in a compound.
This shaves one round-trip of each directory listing, changing it from 4 to 3
for small directories.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

Fixes coccicheck warning:

fs/cifs/smb2ops.c:807:2-36: WARNING: Assignment of 0/1 to bool variable
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

SMB2_tdis() checks if a root handle is valid in order to decide
whether it needs to close the handle or not. However if another
thread has reference for the handle, it may end up with putting
the reference twice. The extra reference that we want to put
during the tree disconnect is the reference that has a directory
lease. So, track the fact that we have a directory lease and
close the handle only in that case.
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Since timestamps on files on most servers can be updated at
close, and since timestamps on our dentries default to one
second we can have stale timestamps in some common cases
(e.g. open, write, close, stat, wait one second, stat - will
show different mtime for the first and second stat).

The SMB2/SMB3 protocol allows querying timestamps at close
so add the code to request timestamp and attr information
(which is cheap for the server to provide) to be returned
when a file is closed (it is not needed for the many
paths that call SMB2_close that are from compounded
query infos and close nor is it needed for some of
the cases where a directory close immediately follows a
directory open.
Signed-off-by: NSteve French <stfrench@microsoft.com>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

Currenly we doesn't assume that a server may break a lease
from RWH to RW which causes us setting a wrong lease state
on a file and thus mistakenly flushing data and byte-range
locks and purging cached data on the client. This leads to
performance degradation because subsequent IOs go directly
to the server.

Fix this by propagating new lease state and epoch values
to the oplock break handler through cifsFileInfo structure
and removing the use of cifsInodeInfo flags for that. It
allows to avoid some races of several lease/oplock breaks
using those flags in parallel.
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.

Channels are closed when the master session is closed.

The master connection becomes the first channel.

,-------------> global cifs_tcp_ses_list <-------------------------.
|                                                                  |
'- TCP_Server_Info  <-->  TCP_Server_Info  <-->  TCP_Server_Info <-'
      (master con)           (chan#1 con)         (chan#2 con)
      |      ^                    ^                    ^
      v      '--------------------|--------------------'
   cifs_ses                       |
   - chan_count = 3               |
   - chans[] ---------------------'
   - smb3signingkey[]
      (master signing key)

Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).

For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.

For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().

Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.

Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.

Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

New channels are going to be opened by walking the list sequentially,
so by sorting it we will connect to the fastest interfaces first.
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.

Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.

Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d79 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: NFrank Sorenson <sorenson@redhat.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Move the same error code assignments so that such exception handling
can be better reused at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

Generated by: scripts/coccinelle/api/memdup_user.cocci

Fixes: f5b05d62 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Spotted by Ronnie.
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>