We will always have a page mapped for cmd data if it is
valid command. If the mapping does not exist then something
bad happened in userspace and it should not proceed. This
has us return VM_FAULT_SIGBUS when this happens instead of
returning a freshly allocated paged. The latter can cause
corruption because userspace might write the pages data
overwriting valid data or return it to the initiator.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Users might have a physical system to a target so they could
have a lot more than 2 gigs of memory they want to devote to
tcmu. OTOH, we could be running in a vm and so a 2 gig
global and 1 gig per dev limit might be too high. This patch
allows the user to specify the limits.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This adds a timer, qfull_time_out, that controls how long a
device will wait for ring buffer space to open before
failing the commands in the queue. It is useful to separate
this timer from the cmd_time_out and default 30 sec one,
because for HA setups cmd_time_out may be disbled and 30
seconds is too long to wait when some OSs like ESX will
timeout commands after as little as 8 - 15 seconds.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch has tcmu internally queue cmds if its ring buffer
is full. It also makes the TCMU_GLOBAL_MAX_BLOCKS limit a
hint instead of a hard limit, so we do not have to add any
new locks/atomics in the main IO path except when IO is not
running.

This fixes the following bugs:

1. We cannot sleep from the submitting context because it might be
called from a target recv context. This results in transport level
commands timing out. For example if the ring is full, we would
sleep, and a iscsi initiator would send a iscsi ping/nop which
times out because the target's recv thread is sleeping here.

2. Devices were not fairly scheduled to run when they hit the global
limit so they could time out waiting for ring space while others
got run.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We do not really save a lot by trying to increase thresh
a multiple of the existing value. This just simplifies the
code by increasing it to whatever is needed for the command
being executed.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In the next patches we will call queue_cmd_ring from the submitting
context and also the completion path. This changes the queue_cmd_ring
return code so in the next patches we can return a sense_reason_t
and also signal if a command was requeued.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add some comments to make the scatter code to be more readable,
and drop unused arg to new_iov.
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The blocks_left calculation does not account for free blocks
between 0 and thresh, so we could be queueing/waiting when
there are enough blocks free.

This has us add in the blocks between 0 and thresh as well as
at the end from thresh to DATA_BLOCK_BITS.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

scatter_data_area always returns 0, so stop checking
for errors.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If we cannot setup a cmd because we run out of ring space
or global pages release the blocks before sleeping. This
prevents a deadlock where dev0 has waiting_blocks set and
needs N blocks, but dev1 to devX have each allocated N / X blocks
and also hit the global block limit so they went to sleep.

find_free_blocks is not able to take the sleeping dev's
blocks becaause their waiting_blocks is set and even
if it was not the block returned by find_last_bit could equal
dbi_max. The latter will probably never happen because
DATA_BLOCK_BITS is so high but in the next patches
DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so
it might be lower and could happen.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

No need for the commands_lock. The cmdr_lock is already held during
idr addition and deletion, so just grab it during traversal.

Note: This also fixes a issue where we should have been using at
least _bh locking in tcmu_handle_completions when taking the commands
lock to prevent the case where tcmu_handle_completions could be
interrupted by a timer softirq while the commands_lock is held.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This moves the expired command completion handling to
the unmap wq, so the next patch can use a mutex
in tcmu_check_expired_cmd.

Note:
tcmu_device_timedout's use of spin_lock_irq was not needed.
The commands_lock is used between thread context (tcmu_queue_cmd_ring
and tcmu_irqcontrol (even though this is named irqcontrol it is not
run in irq context)) and timer/bh context. In the timer/bh context
bhs are disabled, so you need to use the _bh lock calls from the
thread context callers.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If the unmap thread has already run find_free_blocks
but not yet run prepare_to_wait when a wake_up(&unmap_wait)
call is done, the unmap thread is going to miss the wake
call. Instead of adding checks for if new waiters were added
this just has us use a work queue which will run us again
in this type of case.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Separate unmap_thread_fn to make it easier to read.

Note: this patch does not fix the bug where we might
miss a wake up call. The next patch will fix that.
This patch only separates the code into functions.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Have unmap_thread_fn use tcmu_blocks_release.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The page addr should be update.
Signed-off-by: Ntangwenji <tang.wenji@zte.com.cn>
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }
Signed-off-by: NKees Cook <keescook@chromium.org>

We added a new error path here but we forgot to drop the lock first
before returning.

Fixes: 0d44374c ("tcmu: fix double se_cmd completion")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

"udev->nl_reply_supported" is an int but on 64 bit arches we are writing
8 bytes of data to it so it corrupts four bytes beyond the end of the
struct.

Fixes: b849b456 ("target: Add netlink command reply supported option for each device")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If cmd_time_out != 0, then tcmu_queue_cmd_ring could end up
sleeping waiting for ring space, timing out and then returning
failure to lio, and tcmu_check_expired_cmd could also detect
the timeout and call target_complete_cmd on the cmd.

This patch just delays setting up the deadline value and adding
the cmd to the udev->commands idr until we have allocated ring
space and are about to send the cmd to userspace.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Currently netlink command reply support option
(TCMU_ATTR_SUPP_KERN_CMD_REPLY) can be enabled only on module
scope. Because of that, once an application enables the netlink
command reply support, all applications using target_core_user.ko
would be expected to support the netlink reply. To make matters worse,
users will not be able to add a device via configfs manually.

To fix these issues, this patch adds an option to make netlink command
reply disabled on each device through configfs. Original
TCMU_ATTR_SUPP_KERN_CMD_REPLY is still enabled on module scope to keep
backward-compatibility and used by default, however once users set
nl_reply_supported=<NAGATIVE_VALUE> via configfs for a particular
device, the device disables the netlink command reply support.
Signed-off-by: NKenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch makes a tiny change that using TCMU_DEV in
tcmu_cmd_time_out_show so it is consistent with other functions.
Signed-off-by: NKenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Before the nl REMOVE msg has been sent to the userspace, the ring's
and other resources have been released, but the userspace maybe still
using them. And then we can see the crash messages like:

ring broken, not handling completions
BUG: unable to handle kernel paging request at ffffffffffffffd0
IP: tcmu_handle_completions+0x134/0x2f0 [target_core_user]
PGD 11bdc0c067
P4D 11bdc0c067
PUD 11bdc0e067
PMD 0

Oops: 0000 [#1] SMP
cmd_id not found, ring is broken
RIP: 0010:tcmu_handle_completions+0x134/0x2f0 [target_core_user]
RSP: 0018:ffffb8a2d8983d88 EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffb8a2aaa4e000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000220
R10: 0000000076c71401 R11: ffff8d2e76c713f0 R12: ffffb8a2aad56bc0
R13: 000000000000001c R14: ffff8d2e32c90000 R15: ffff8d2e76c713f0
FS:  00007f411ffff700(0000) GS:ffff8d1e7fdc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd0 CR3: 0000001027070000 CR4:
00000000001406e0
Call Trace:
? tcmu_irqcontrol+0x2a/0x40 [target_core_user]
? uio_write+0x7b/0xc0 [uio]
? __vfs_write+0x37/0x150
? __getnstimeofday64+0x3b/0xd0
? vfs_write+0xb2/0x1b0
? syscall_trace_enter+0x1d0/0x2b0
? SyS_write+0x55/0xc0
? do_syscall_64+0x67/0x150
? entry_SYSCALL64_slow_path+0x25/0x25
Code: 41 5d 41 5e 41 5f 5d c3 83 f8 01 0f 85 cf 01 00
00 48 8b 7d d0 e8 dd 5c 1d f3 41 0f b7 74 24 04 48 8b
7d c8 31 d2 e8 5c c7 1b f3 <48> 8b 7d d0 49 89 c7 c6 07
00 0f 1f 40 00 4d 85 ff 0f 84 82 01  RIP:
tcmu_handle_completions+0x134/0x2f0 [target_core_user]
RSP: ffffb8a2d8983d88
CR2: ffffffffffffffd0

And the crash also could happen in tcmu_page_fault and other places.
Signed-off-by: NZhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On initial tcmu_configure_device call the info->name would
have already been allocated and set, so on the second call
make sure to free it first.
Reported-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

For most case the sg->length equals to PAGE_SIZE, so this bug won't
be triggered. Otherwise this will crash the kernel, for example when
all segments' sg->length equal to 1K.
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Remove useless blank line and code and at the same time add one error
path to catch the errors.
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

For all the entries allocated from the ring cmd area, the memory is
something like the stack memory, which will always reserve the old
data, so the entry->req.iov_bidi_cnt maybe none zero.

On some environments, the crash could be reproduce very easy and some
not. The following is the crash core trace as reported by Damien:

[  240.143969] CPU: 0 PID: 1285 Comm: iscsi_trx Not tainted 4.12.0-rc1+ #3
[  240.150607] Hardware name: ASUS All Series/H87-PRO, BIOS 2104 10/28/2014
[  240.157331] task: ffff8807de4f5800 task.stack: ffffc900047dc000
[  240.163270] RIP: 0010:memcpy_erms+0x6/0x10
[  240.167377] RSP: 0018:ffffc900047dfc68 EFLAGS: 00010202
[  240.172621] RAX: ffffc9065db85540 RBX: ffff8807f7980000 RCX: 0000000000000010
[  240.179771] RDX: 0000000000000010 RSI: ffff8807de574fe0 RDI: ffffc9065db85540
[  240.186930] RBP: ffffc900047dfd30 R08: ffff8807de41b000 R09: 0000000000000000
[  240.194088] R10: 0000000000000040 R11: ffff8807e9b726f0 R12: 00000006565726b0
[  240.201246] R13: ffffc90007612ea0 R14: 000000065657d540 R15: 0000000000000000
[  240.208397] FS:  0000000000000000(0000) GS:ffff88081fa00000(0000) knlGS:0000000000000000
[  240.216510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  240.222280] CR2: ffffc9065db85540 CR3: 0000000001c0f000 CR4: 00000000001406f0
[  240.229430] Call Trace:
[  240.231887]  ? tcmu_queue_cmd+0x83c/0xa80
[  240.235916]  ? target_check_reservation+0xcd/0x6f0
[  240.240725]  __target_execute_cmd+0x27/0xa0
[  240.244918]  target_execute_cmd+0x232/0x2c0
[  240.249124]  ? __local_bh_enable_ip+0x64/0xa0
[  240.253499]  iscsit_execute_cmd+0x20d/0x270
[  240.257693]  iscsit_sequence_cmd+0x110/0x190
[  240.261985]  iscsit_get_rx_pdu+0x360/0xc80
[  240.267565]  ? iscsi_target_rx_thread+0x54/0xd0
[  240.273571]  iscsi_target_rx_thread+0x9a/0xd0
[  240.279413]  kthread+0x113/0x150
[  240.284120]  ? iscsi_target_tx_thread+0x1e0/0x1e0
[  240.290297]  ? kthread_create_on_node+0x40/0x40
[  240.296297]  ret_from_fork+0x2e/0x40
[  240.301332] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38
[  240.321751] RIP: memcpy_erms+0x6/0x10 RSP: ffffc900047dfc68
[  240.328838] CR2: ffffc9065db85540
[  240.333667] ---[ end trace b7e5354cfb54d08b ]---

To fix this, just memset all the entry memory before using it, and
also to be more readable we adjust the bidi code.

Fixed: fe25cc34(tcmu: Recalculate the tcmu_cmd size to save cmd area
		memories)
Reported-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Reported-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Currently when there is a reconfig, the uio_info->name
does not get updated to reflect the change in the dev_config
name change.

On restart tcmu-runner there will be a mismatch between
the dev_config string in uio and the tcmu structure that contains
the string. When this occurs it'll reload the one in uio
and you lose the reconfigured device path.

v2: Created a helper function for the updating of uio_info
Signed-off-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We were just copying the sense to the cmd sense_buffer and
did not implement a transport_complete or set the
SCF_TRANSPORT_TASK_SENSE, so the sense was ignored.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

When feeding the tcmu's cmd ring, we need to flush the dcache page
for the cmd entry to make sure these kernel stores are visible to
user space mappings of that page.

For the none PAD cmd entry, this will be flushed at the end of the
tcmu_queue_cmd_ring().
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If the uio device is open and closed multiple times, the
kref count will be off due to tcmu_release getting called
multiple times for each close. This patch integrates
Wenji Tang's patch to add a kref_get on open that now
matches the kref_put done on tcmu_release and adds
a kref_put in tcmu_destroy_device to match the kref_get
done in succesful tcmu_configure_device calls.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Cc: Wenji Tang <tang.wenji@zte.com.cn>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

destroy_device is only called if we have successfully run
configure_device, so drop the duplicate tcmu_dev_configured check.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This makes the device add, del reconfig operations sync. It fixes
the issue where for add and reconfig, we do not know if userspace
successfully completely the operation, so we leave invalid kernel
structs or report incorrect status for the config/reconfig operations.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

With this patch free_device is now used to free what is allocated in the
alloc_device callback and destroy_device tears down the resources that are
setup in the configure_device callback.

This patch will be needed in the next patch where tcmu needs
to be able to look up the device in the destroy callback.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

1. TCMU_ATTR_TYPE is too generic when it describes only the
reconfiguration type, so rename to TCMU_ATTR_RECONFIG_TYPE.

2. Only return the reconfig type when it is a
TCMU_CMD_RECONFIG_DEVICE command.

3. CONFIG_* type is not needed. We can pass the value along with an
ATTR to userspace, so it does not need to read sysfs/configfs.

4. Fix leak in tcmu_dev_path_store and rename to dev_config to
reflect it is more than just a path that can be changed.

6. Don't update kernel struct value if netlink sending fails.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: N"Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The array tcmu_attrib_attrs does not need to be in global scope, so make
it static.

Cleans up sparse warning:
"symbol 'tcmu_attrib_attrs' was not declared. Should it be static?"
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Because the unmap code just after the schdule() returned may take
a long time and if the kthread_stop() is fired just when in this
routine, the module removal maybe stuck too.
Signed-off-by: NXiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds more info about the attribute being changed,
so that usersapce can easily figure out what is happening.
Signed-off-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-By: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This allows for userspace to change the device path after
it has been created. Thus giving the user the ability to change
the path. The use case for this is to allow for virtual optical
to have media change.
Signed-off-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-By: NMike Christie <mchristi@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>