We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74117.html

The reset domain contains register access semaphor
now and so needs to be present as long as each device
in a hive needs it and so it cannot be binded to XGMI
hive life cycle.
Adress this by making reset domain refcounted and pointed
by each member of the hive and the hive itself.

v4:

Fix crash on boot witrh XGMI hive by adding type to reset_domain.
XGMI will only create a new reset_domain if prevoius was of single
device type meaning it's first boot. Otherwsie it will take a
refocunt to exsiting reset_domain from the amdgou device.

Add a wrapper around reset_domain->refcount get/put
and a wrapper around send to reset wq (Lijo)
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74121.html

Since now all GPU resets are serialzied there is no need for this.

This patch also reverts 'drm/amdgpu: race issue when jobs on 2 ring timeout'
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74119.html

Since we serialize all resets no need to protect from concurrent
resets.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74115.html

No need to to trigger another work queue inside the work queue.

v3:

Problem:
Extra reset caused by host side FLR notification
following guest side triggered reset.
Fix: Preven qeuing flr_work from mailbox irq if guest
already executing a reset.
Suggested-by: NLiu Shaoyun <Shaoyun.Liu@amd.com>
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NLiu Shaoyun <Shaoyun.Liu@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74114.html

Use reset domain wq also for non TDR gpu recovery trigers
such as sysfs and RAS. We must serialize all possible
GPU recoveries to gurantee no concurrency there.
For TDR call the original recovery function directly since
it's already executed from within the wq. For others just
use a wrapper to qeueue work and wait on it to finish.

v2: Rename to amdgpu_recover_work_struct
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74113.html

Before we initialize schedulers we must know which reset
domain are we in - for single device there iis a single
domain per device and so single wq per device. For XGMI
the reset domain spans the entire XGMI hive and so the
reset wq is per hive.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74112.html

Defined a reset_domain struct such that
all the entities that go through reset
together will be serialized one against
another. Do it for both single device and
XGMI hive cases.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: NChristian König <ckoenig.leichtzumerken@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74111.html

Currently we can get a warning on systems with eDP backlights like so:

  nv_backlight: invalid backlight type
  WARNING: CPU: 4 PID: 454 at drivers/video/backlight/backlight.c:420
    backlight_device_register+0x226/0x250

This happens as a result of us not filling out props.type for the eDP
backlight, even though we do it for all other backlight types.

Since nothing in our driver uses anything but BACKLIGHT_RAW, let's take the
props\.type assignments out of the codepaths for individual backlight types
and just set it unconditionally to prevent this from happening again.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Fixes: 6eca310e ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: NKarol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204193319.451119-1-lyude@redhat.com

It seems that some laptops will report having both an eDP and LVDS
connector, even though only the LVDS connector is actually hooked up. This
can lead to issues with backlight registration if the eDP connector ends up
getting registered before the LVDS connector, as the backlight device will
then be registered to the eDP connector instead of the LVDS connector.

So, fix this by only registering the backlight on connectors that are
reported as being connected.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Fixes: 6eca310e ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: NKarol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204180504.328999-1-lyude@redhat.com

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.

Link: https://github.com/KSPP/linux/issues/160Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207233923.GA524723@embeddedor

Add helpers for initializing SIL164-based connectors. These used to be
handled by the VGA connector code. But SIL164 provides output via DVI-I,
so set the encoder and connector types accordingly.

If a SIL164 chip has been detected, ast will now create a DVI-I
connector instead of a VGA connector.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de

Add helpers for DP501-based connectors. DP501 provides output via
DisplayPort. This used to be handled by the VGA connector code.

If a DP501 chip has been detected, ast will now create a DisplayPort
connector instead of a VGA connector.

Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also
remove the call to drm_connector_update_edid_property(), which is
performed by drm_get_edid().
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de

Read the encoder's possible-CRTC mask from the involved CRTC instead
of hard-coding it.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-8-tzimmermann@suse.de

Move encoder and connector initialization into a single helper and
put all related mode-setting structures into a single place. Done in
preparation of moving transmitter code into separate helpers. No
functional changes.

v2:
	* move encoder CRTC bitmask fix into separate patch (Javier)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de

Prepare for introducing other connectors besides VGA. No functional
changes.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-6-tzimmermann@suse.de

Remove reading the link-rate. The value is maintained by the connector
code but never used.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-5-tzimmermann@suse.de

The ITE66121 is an HDMI transmitter chip. There's no code for
detecting or programming the chip within ast. Remove the enum
constant.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-4-tzimmermann@suse.de

The tests in ast_mode_valid() verify the correct resolution for the
supplied mode. This is a limitation of the CRTC, so move the function
to the CRTC helpers. No functional changes.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-3-tzimmermann@suse.de

Update the connector code to fail if the connector could not be
initialized. The current code just ignored the error and failed
later when the connector was supposed to be used.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-2-tzimmermann@suse.de

Instead of manually extracting the fence.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204100429.2049-7-christian.koenig@amd.com

linux/string_helpers.h provides a helper to return "yes"/"no" strings.
Replace the open coded versions with str_yes_no(). The places were
identified with the following semantic patch:

	@@
	expression b;
	@@

	- b ? "yes" : "no"
	+ str_yes_no(b)

Then the includes were added, so we include-what-we-use, and parenthesis
adjusted in drivers/gpu/drm/v3d/v3d_debugfs.c. After the conversion we
still see the same binary sizes:

   text    data     bss     dec     hex filename
  51149    3295     212   54656    d580 virtio/virtio-gpu.ko.old
  51149    3295     212   54656    d580 virtio/virtio-gpu.ko
1441491   60340     800 1502631  16eda7 radeon/radeon.ko.old
1441491   60340     800 1502631  16eda7 radeon/radeon.ko
6125369  328538   34000 6487907  62ff63 amd/amdgpu/amdgpu.ko.old
6125369  328538   34000 6487907  62ff63 amd/amdgpu/amdgpu.ko
 411986   10490    6176  428652   68a6c drm.ko.old
 411986   10490    6176  428652   68a6c drm.ko
  98129    1636     264  100029   186bd dp/drm_dp_helper.ko.old
  98129    1636     264  100029   186bd dp/drm_dp_helper.ko
1973432  109640    2352 2085424  1fd230 nouveau/nouveau.ko.old
1973432  109640    2352 2085424  1fd230 nouveau/nouveau.ko
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-10-lucas.demarchi@intel.com

Sort includes alphabetically so it's easier to add/remove includes and
know when that is needed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-9-lucas.demarchi@intel.com

Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-8-lucas.demarchi@intel.com

Fix the following warning from "make htmldocs":

drivers/gpu/drm/drm_privacy_screen.c:392:
  warning: Function parameter or member 'data' not described in
  'drm_privacy_screen_register'

Fixes: 30598d92 ("drm/privacy_screen: Add drvdata in drm_privacy_screen")
Cc: Rajat Jain <rajatja@google.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NSimon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207113307.346281-1-hdegoede@redhat.com

Remove allow_fb_modifiers setting in this driver. The allow_fb_modifiers
flag was removed.
Signed-off-by: NTomohito Esaki <etom@igel.co.jp>
Fixes: 3d082157 ("drm: remove allow_fb_modifiers")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204023635.15496-1-etom@igel.co.jp

As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.

  arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
    `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
    `drm_panel_dp_aux_backlight'
  make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1

The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]

v2:
	* fix and expand commit description (Arnd)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: adb9d5a2 ("drm/dp: Move DisplayPort helpers into separate helper module")
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: NLinux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de

Only x86 and in some cases PPC have support added in drm_cache.c for the
clflush class of functions. However warning once is sufficient to taint
the log instead of spamming it with "Architecture has no drm_cache.c
support" every few millisecond. Switch to WARN_ONCE() so we still get
the log message, but only once, together with the warning. E.g:

	------------[ cut here ]------------
	Architecture has no drm_cache.c support
	WARNING: CPU: 80 PID: 888 at drivers/gpu/drm/drm_cache.c:139 drm_clflush_sg+0x40/0x50 [drm]
	...

v2 (Jani): use WARN_ONCE() and keep the message previously on pr_err()

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-2-lucas.demarchi@intel.com

Use the dev_err_probe() helper, instead of open-coding the same
operation. This also adds a nice hint in
/sys/kernel/debug/devices_deferred.
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: NMarek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202081755.145716-2-alexander.stein@ew.tq-group.com

Decomposing fence containers don't seem to make any sense here.

So just remove the function entirely and call dma_fence_wait() directly.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NZack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124130328.2376-12-christian.koenig@amd.com

When we have the entire DRM state, retrieving the connector state only
requires the drm_connector pointer. Fortunately for us, we have
allocated it as a part of the vc4_hdmi structure, so we can retrieve get
a pointer by simply accessing our field in that structure.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111404.221882-1-maxime@cerno.tech

Even though we have the other drm_display_info fields reset, the DC
modes are missing.

This shouldn't be an issue since it's explicitly reset every time a new
EDID is parsed.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125093251.594772-1-maxime@cerno.tech

Mark screen buffers in system memory with FBINFO_VIRTFB. Otherwise, fbdev
deferred I/O marks mmap'ed areas of system memory with VM_IO. (There's an
inverse relationship between the two flags.)

For shadow buffers, also set the FBINFO_READS_FAST hint.

v3:
	* change FB_ to FBINFO_ in commit description
v2:
	* updated commit description (Daniel)
	* added Fixes tag
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: d536540f ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20220201115305.9333-1-tzimmermann@suse.de

This reverts commit 363c4c38.

Since the point of this attribute is for a test, this should be done
in debugfs, not sysfs. Let's revert and a new patch can be added later
doing it in debugfs.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201092152.1.Ibc65ec6fa05017e9856ba9ef557310268429c3ce@changeid

Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.

We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.

Let's add a new sysfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125135406.1.I62322abf81dbc1a1b72392a093be0c767da9bf51@changeid

This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.

From: Allen Chen <allen.chen@ite.com.tw>
Tested-by: NHsin-yi Wang <hsinyi@chromium.org>
Signed-off-by: NHermes Wu <hermes.wu@ite.com.tw>
Signed-off-by: NAllen Chen <allen.chen@ite.com.tw>
Reviewed-by: NAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw

[why]
Unlock is needed on the error handling path to prevent dead lock.
v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.

[how]
Fix this by changing goto target on the error handling path. So
changing the goto to target an error handling path
that includes drm_gem_unlock reservations.
Signed-off-by: NYongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: NMelissa Wen <mwen@igalia.com>
Signed-off-by: NMelissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn

The allow_fb_modifiers flag is unnecessary since it has been replaced
with fb_modifiers_not_supported flag.

v3:
 - change the order as follows:
   1. add fb_modifiers_not_supported flag
   2. add default modifiers
   3. remove allow_fb_modifiers flag

v5:
 - keep a sanity check in plane init func
Signed-off-by: NTomohito Esaki <etom@igel.co.jp>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-4-etom@igel.co.jp

The LINEAR modifier is advertised as default if a driver doesn't specify
modifiers.

v2:
 - rebase to the latest master branch (5.16.0+)
    + "drm/plane: Make format_mod_supported truly optional" patch [1]
   [1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3

v3:
 - change the order as follows:
   1. add fb_modifiers_not_supported flag
   2. add default modifiers
   3. remove allow_fb_modifiers flag

v5:
 - change default_modifiers array from non-static to static
 - remove terminator in default_modifiers array
 - use ARRAY_SIZE to get the format_modifier_count
 - update sanity check in plane init func to use the
   fb_modifiers_not_supported
 - modify kernel docs
Signed-off-by: NTomohito Esaki <etom@igel.co.jp>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-3-etom@igel.co.jp

If only linear modifier is advertised, since there are many drivers that
only linear supported, the DRM core should handle this rather than
open-coding in every driver. However, there are legacy drivers such as
radeon that do not support modifiers but infer the actual layout of the
underlying buffer. Therefore, a new flag fb_modifiers_not_supported is
introduced for these legacy drivers, and allow_fb_modifiers is replaced
with this new flag.

v3:
 - change the order as follows:
   1. add fb_modifiers_not_supported flag
   2. add default modifiers
   3. remove allow_fb_modifiers flag
 - add a conditional disable in amdgpu_dm_plane_init()

v4:
 - modify kernel docs

v5:
 - modify kernel docs
Signed-off-by: NTomohito Esaki <etom@igel.co.jp>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-2-etom@igel.co.jp