Merge tag 'for-net-next-2021-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add support for MediaTek MT7922 and MT7921
 - Enable support for AOSP extention in Qualcomm WCN399x and Realtek
   8822C/8852A.
 - Add initial support for link quality and audio/codec offload.
 - Rework of sockets sendmsg to avoid locking issues.
 - Add vhci suspend/resume emulation.

====================

Link: https://lore.kernel.org/r/20211001230850.3635543-1-luiz.dentz@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Convert usb drivers from memcpy(... dev->addr_len)
to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, dev->addr_len)
  + eth_hw_addr_set(dev, np)

Manually checked these are either usbnet or pure etherdevs.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all Ethernet drivers from memcpy(... dev->addr_len)
to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, dev->addr_len)
  + eth_hw_addr_set(dev, np)

In theory addr_len may not be ETH_ALEN, but we don't expect
non-Ethernet devices to live under this directory, and only
the following cases of setting addr_len exist:
 - cxgb4 for mgmt device,
and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
mlx4: prep for constant dev->dev_addr

This patch converts mlx4 for dev->dev_addr being const. It converts
to use of common helpers but also removes some seemingly unnecessary
idiosyncrasies.

Please review.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netdev->dev_addr will become const soon. Make sure all
functions which pass it around mark appropriate args
as const.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_en_u64_to_mac() takes the dev->dev_addr pointer and writes
to it byte by byte. It also clears the two bytes _after_ ETH_ALEN
which seems unnecessary. dev->addr_len is set to ETH_ALEN just
before the call.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_u64_to_mac() predates the common helper but doesn't
make the argument constant.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_mac_to_u64() predates and opencodes ether_addr_to_u64().
It doesn't make the argument constant so it'll be problematic
when dev->dev_addr becomes a const. Convert to the generic helper.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No users in tree since commit a3498436 ("netns: restrict uevents"),
so remove this functionality.

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-10-04

Misc updates for mlx5 driver

1) Add TX max rate support for MQPRIO channel mode
2) Trivial TC action and modify header refactoring
3) TC support for accept action in fdb offloads
4) Allow single IRQ for PCI functions

5) Bridge offload: Pop PVID VLAN header on egress miss

Vlad Buslov says:
=================

With current architecture of mlx5 bridge offload it is possible for a
packet to match in ingress table by source MAC (resulting VLAN header push
in case of port with configured PVID) and then miss in egress table when
destination MAC is not in FDB. Due to the lack of hardware learning in
NICs, this, in turn, results packet going to software data path with PVID
VLAN already added by hardware. This doesn't break software bridge since it
accepts either untagged packets or packets with any provisioned VLAN on
ports with PVID, but can break ingress TC, if affected part of Ethernet
header is matched by classifier.

Improve compatibility with software TC by restoring the packet header on
egress miss. Effectively, this change implements atomicity of mlx5 bridge
offload implementation - packet is either modified and redirected to
destination port or appears unmodified in software.

=================

=================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check ethernet controller DT node for "mdio" subnode and use it with
of_mdiobus_register() when present. That allows specifying MDIO and its
PHY devices in a standard DT based way.

This is required for BCM53573 SoC support. That family is sometimes
called Northstar (by marketing?) but is quite different from it. It uses
different CPU(s) and many different hw blocks.

One of shared blocks in BCM53573 is Ethernet controller. Switch however
is not SRAB accessible (as it Northstar) but is MDIO attached.
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Use info from DT if available

It allows describing for example a fixed link. It's more accurate than
just guessing there may be one (depending on a chipset).

2. Verify PHY ID before trying to connect PHY

PHY addr 0x1e (30) is special in Broadcom routers and means a switch
connected as MDIO devices instead of a real PHY. Don't try connecting to
it.
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to cast the pointer, unlike memcpy() eth_hw_addr_set()
does not take void *. The driver already casts &port->mac_addr
to u8 * in other places.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Fixes: a96d317f ("ethernet: use eth_hw_addr_set()")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prior to this patch the driver requires two IRQs to function properly,
one required IRQ for control and at least one required IRQ for IO.

This requirement can be relaxed to one as the driver now allows
sharing of IRQs, so control and IO EQs can share the same irq.

This is needed for high scale amount of VFs.
Signed-off-by: NShay Drory <shayd@nvidia.com>
Reviewed-by: NMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Control IRQ is the first IRQ vector. This complicates handling of
completion irqs as we need to offset them by one.
in the next patch, there are scenarios where completion and control EQs
will share the same irq. for example: functions with single IRQ. To ease
such scenarios, we shift control IRQ to the end of the irq array.
Signed-off-by: NShay Drory <shayd@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Create lowest priority flow group in egress table with single rule that
matches on special reg_c1 value that is set on ingress VLAN push with
single action that pops VLAN. The flow destination is skip table that is
used to skip any further processing of packet in FDB bridge priority.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

On ingress VLAN push also assign value 0x7FE to reg_c1 tunnel id+opts
bits (tunnel id 0, which is not a valid tunnel id, and option 0x7FE which
was reserved by one of previous patches in the series). In following patch
the reg value is matched on egress miss to restore the packet to its
original state by removing the VLAN before passing it to the software data
path.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Following patches in series need to pop VLAN when packet misses on egress.
To reuse existing bridge VLAN pop handling code, extract it to dedicated
helpers mlx5_esw_bridge_pkt_reformat_vlan_pop_supported() and
mlx5_esw_bridge_pkt_reformat_vlan_pop_create().
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Several functions in bridge.c excessively obtain pointer to parent eswitch
instance by dereferencing br_offloads->esw on every usage and following
patches in this series add even more usages of eswitch. Introduce local
variable 'esw' and use it instead.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Support TC generic 'accept' action in mlx5 by introducing
MLX5_ESW_ATTR_FLAG_ACCEPT attribute flag. Flag has similar semantics to
existing MLX5_ESW_ATTR_FLAG_SLOW_PATH flag, however, dedicated flag is
required because existing 'slow path' flag can be flipped by tunneling
subsystem when neighbor changes state.

Introduce new helper function mlx5_esw_attr_flags_skip() to check whether
attribute flags for 'slow path' or 'accept' action are set and use it in
eswitch code instead of direct bit manipulation.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There is a use case that the local and remote VTEPs are in the same
host. Currently, the out ifindex is not specified when looking up the
encap route for offloads. So in this case, a local route is returned
and the route dev is lo.

Actual tunnel interface can be created with a parameter "dev" [1],
which specifies the physical device to use for tunnel endpoint
communication. Pass this parameter to driver when looking up encap
route for offloads. So that a unicast route will be returned.

[1] ip link add name vxlan1 type vxlan id 100 dev enp4s0f0 remote 1.1.1.1 dstport 4789
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Reserve one more value from TC tunnel options range to be used by bridge
offload in following patches.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The parse fdb/nic actions funcs parse the actions and then call
actions_match_supported() for final check.
Move related check in parse_tc_fdb_actions() into
actions_match_supported_fdb() for more organized code.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There will probably be more checks, some for nic flows, some for fdb
flows and some are shared checks. Split it for fdb and nic to avoid
the function getting too big.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Move mod hdr allocation chunk from parse_tc_fdb_actions() and
parse_tc_nic_actions() to a shared function.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Refactor sample unoffload to be symmetric to sample offload.
Use the existing del_post_rule() to release the post rule.
Also mlx5e_tc_sample_unoffload() should not return post_rule
which is NULL when post actions are supported.
Sample offload works with this NULL because many places of the
code use IS_ERR() instead of IS_ERR_OR_NULL() to check rule is valid
and when rule is detected as sample offload the code is not using the
rule. Let's be persistent and avoid returning NULL anyway and return the
pre rule, like in CT case, which is not NULL.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NChris Mi <cmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Add driver max_rate support for the MQPRIO bw_rlimit shaper
in channel mode.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Let the caller of mlx5e_open_txqsq() directly pass the SQ stats
structure pointer.
This replaces logic involving the qos_queue_group_id parameter,
and helps generalizing its role in the next patch.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Russell King says:

====================
Add phylink helper for 10G modes

During the last cycle, there was discussion about adding a helper
to set the 10G link modes for phylink, which resulted in these two
patches introduce such a helper.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update three drivers to use the new phylink_set_10g_modes() helper:
Cadence macb, Freescale DPAA2 and Marvell PP2.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a helper for setting 10Gigabit modes, so we have one central
place that sets all appropriate 10G modes for a driver.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sdata->tun_src should be freed before sdata is freed
because sdata->tun_src is allocated after sdata allocation.
So, kfree(sdata) and kfree(rcu_dereference_raw(sdata->tun_src)) are
changed code order.

Fixes: f04ed7d2 ("net: ipv6: check return value of rhashtable_init")
Signed-off-by: NMichelleJin <shjy180909@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prabhakar Kushwaha says:

====================
qed: new firmware version 8.59.1.0 support

This series integrate new firmware version 8.59.1.0, along with updated
HSI (hardware software interface) to use the FW, into the family of
qed drivers (fastlinq devices). This FW does not reside in the NVRAM.
It needs to be programmed to device during driver load as the part of
initialization sequence.

Similar to previous FW support series, this FW is tightly linked to
software and pf function driver. This means FW release is not backward
compatible, and driver should always run with the FW it was designed
against.

FW binary blob is already submitted & accepted in linux-firmware repo.

Patches in the series include:
patch 1     - qed: Fix kernel-doc warnings
patch 2     - qed: Remove e4_ and _e4 from FW HSI
patch 3     - qed: split huge qed_hsi.h header file
patch 4-8   - HSI (hardware software interface) changes
patch 9     - qed: Add '_GTT' suffix to the IRO RAM macros
patch 10    - qed: Update debug related changes
patch 11    - qed: rdma: Update TCP silly-window-syndrome timeout
patch 12    - qed: Update the TCP active termination 2  MSL timer
patch 13    - qed: fix ll2 establishment during load of RDMA driver

In addition, this patch series also fixes existing checkpatch warnings
and checks which are missing.

Changes for v2:
 - Incorporated Jakub's comments.
   - New patch introduced to fix all kernel-doc issue in qed driver.
   - Fixed warning: ‘qed_mfw_ext_20g’ defined but not used.
   - Fixed warning related to kernel-doc wrt to this series.
   - Removed inline function declaration.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If stats ID of a LL2 (light l2) queue exceeds than the total amount
of statistics counters, it may cause system crash upon enabling
RDMA on all PFs.

This patch makes sure that the stats ID of the LL2 queue doesn't exceed
the max allowed value.
Signed-off-by: NManish Chopra <manishc@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to
non-zero default.

This patch also removes magic number from qedi/qedi_main.c.
Reviewed-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NNikolay Assa <nassa@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update TCP silly-window-syndrome timeout, for the cases where
initiator's small TCP window size prevents FW from transmitting
packets on the connection. Timeout causes FW to retransmit
window probes if needed, preventing I/O stall if initiator ignores
first window probe.
Reviewed-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NNikolay Assa <nassa@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qed_debug features are updated to support FW version 8.59.1.0 along
with few enhancements.
  - Removal of _BB_K2 from register defines.
  - Add new condition cond14.
  - Add dump of new area sw-platform, epoch, iscsi_task_pages,
    fcoe_task_pages, roce_task_pages and eth_task_pages.
  - Introduced new functions qed_dbg_phy_size().
  - Update in qed_mcp_nvm_rd_cmd() declaration.
  - Allow QED to control init/exit at pf level.
  - Dump partial "ILT-dump" if buffer size is not sufficient.

This patch also fixes the existing checkpatch warnings and few important
checks.
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GTT (Global translation table) is a fast-access window in the BAR into
the register space, which only maps certain register addresses.
This change helps enforce that only those addresses which are indeed
mapped by the GTT are being accessed through it.

Adding the '_GTT' suffix to the IRO FW memory (“RAM”) macros that
access GTT-able region in FW memories (“RAM”) and use GTT macros
to access RAM BAR from drivers.
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The qed_init_fw_func.c and qed_init_ops.c updated to support FW
version 8.59.1.0.
  - Support 16-bit VPORT WFQ (weighted fair queueing) weights.
  - Support WFQ (weighted fair queueing) weight per VPORT + TC.
  - Support allocation of Tx PQs(physical queues) per PF,VF.
  - Modify Global RL (rate limiter) upper bound configuration.
  - Update FW operation functions.
  - Update iro_arr[] array.

This patch also fixes the existing checkpatch warnings and few important
checks.
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NOmkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>