stable inclusion
from linux-4.19.103
commit 0a69047d8235c60d88c6ca488d8dccc7c60d4d3c

--------------------------------

[ Upstream commit e822969c ]

Patch series "mm: fix max_pfn not falling on section boundary", v2.

Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage.  We
have to properly initialize these memmaps.

Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.

This patch (of 3):

If max_pfn is not aligned to a section boundary, we can easily run into
BUGs.  This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB).  I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).

The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.

E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):

[  200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[  200.477500] #PF: supervisor read access in kernel mode
[  200.478334] #PF: error_code(0x0000) - not-present page
[  200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[  200.479557] Oops: 0000 [#4] SMP NOPTI
[  200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G      D W         5.5.0-rc1-next-20191209 #93
[  200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[  200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[  200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[  200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[  200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[  200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[  200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[  200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[  200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[  200.487130] FS:  00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[  200.487804] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[  200.488897] Call Trace:
[  200.489115]  kpageflags_read+0xe9/0x140
[  200.489447]  proc_reg_read+0x3c/0x60
[  200.489755]  vfs_read+0xc2/0x170
[  200.490037]  ksys_pread64+0x65/0xa0
[  200.490352]  do_syscall_64+0x5c/0xa0
[  200.490665]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:

[root@localhost ~]# cat /proc/kpageflags > /dev/null
[  111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[  111.517907] #PF: supervisor read access in kernel mode
[  111.518333] #PF: error_code(0x0000) - not-present page
[  111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0

This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash).  Commit 907ec5fc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.

After this patch, there are still problems to solve.  E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone.  A follow-up patch will take care of this.

Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Tested-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>	[4.15+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

stable inclusion
from linux-4.19.103
commit f19a50c1e3ba9f58ca5a591a82ac4852da8bc4ee

--------------------------------

[ Upstream commit ec393a0f ]

When checking for valid pfns in zero_resv_unavail(), it is not necessary
to verify that pfns within pageblock_nr_pages ranges are valid, only the
first one needs to be checked.  This is because memory for pages are
allocated in contiguous chunks that contain pageblock_nr_pages struct
pages.

Link: http://lkml.kernel.org/r/20181002143821.5112-3-msys.mizuma@gmail.comSigned-off-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

stable inclusion
from linux-4.19.103
commit 9ac5917a1d28220981512c4f4c391c90a997e0c6

--------------------------------

[ Upstream commit 907ec5fc ]

Patch series "mm: Fix for movable_node boot option", v3.

This patch series contains a fix for the movable_node boot option issue
which was introduced by commit 124049de ("x86/e820: put !E820_TYPE_RAM
regions into memblock.reserved").

The commit breaks the option because it changed the memory gap range to
reserved memblock.  So, the node is marked as Normal zone even if the SRAT
has Hot pluggable affinity.

First and second patch fix the original issue which the commit tried to
fix, then revert the commit.

This patch (of 3):

There is a kernel panic that is triggered when reading /proc/kpageflags on
the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]':

  BUG: unable to handle kernel paging request at fffffffffffffffe
  PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0
  Oops: 0000 [#1] SMP PTI
  CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
  RIP: 0010:stable_page_flags+0x27/0x3c0
  Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7
  RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0
  RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001
  R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0
  R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10
  FS:  00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0
  Call Trace:
   kpageflags_read+0xc7/0x120
   proc_reg_read+0x3c/0x60
   __vfs_read+0x36/0x170
   vfs_read+0x89/0x130
   ksys_pread64+0x71/0x90
   do_syscall_64+0x5b/0x160
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7efc42e75e23
  Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24

According to kernel bisection, this problem became visible due to commit
f7f99100 which changes how struct pages are initialized.

Memblock layout affects the pfn ranges covered by node/zone.  Consider
that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the
default (no memmap= given) memblock layout is like below:

  MEMBLOCK configuration:
   memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x4
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
   memory[0x3]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

If you give memmap=1G!4G (so it just covers memory[0x2]),
the range [0x100000000-0x13fffffff] is gone:

  MEMBLOCK configuration:
   memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x3
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

This causes shrinking node 0's pfn range because it is calculated by the
address range of memblock.memory.  So some of struct pages in the gap
range are left uninitialized.

We have a function zero_resv_unavail() which does zeroing the struct pages
outside memblock.memory, but currently it covers only the reserved
unavailable range (i.e.  memblock.memory && !memblock.reserved).  This
patch extends it to cover all unavailable range, which fixes the reported
issue.

Link: http://lkml.kernel.org/r/20181002143821.5112-2-msys.mizuma@gmail.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: NOscar Salvador <osalvador@suse.de>
Tested-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from v5.4-rc6
commit 1be334e5
category: feature
bugzilla: NA
CVE: NA

-------------------------------------------------

While investigating a bug related to higher atomic allocation failures,
we noticed the failure warnings positively drowning the console, and in
our case trigger lockup warnings because of a serial console too slow to
handle all that output.

But even if we had a faster console, it's unclear what additional
information the current level of repetition provides.

Allocation failures happen for three reasons: The machine is OOM, the VM
is failing to handle reasonable requests, or somebody is making
unreasonable requests (and didn't acknowledge their opportunism with
__GFP_NOWARN).  Having the memory dump, a callstack, and the ratelimit
stats on skipped failure warnings should provide enough information to
let users/admins/developers know whether something is wrong and point
them in the right direction for debugging, bpftracing etc.

Limit allocation failure warnings to one spew every ten seconds.

Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Conflicts:
    mm/page_alloc.c
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 742aa7fb ]

There are multiple places of freeing a page, they all do the same things
so a common function can be used to reduce code duplicate.

It also avoids bug fixed in one function but left in another.

Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.comSigned-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Pawel Staszewski <pstaszewski@itcare.pl>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 65895b67 ]

page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.

Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:

  mlx5e_poll_tx_cq
  |
   --16.34%--napi_consume_skb
             |
             |--12.65%--__free_pages_ok
             |          |
             |           --11.86%--free_one_page
             |                     |
             |                     |--10.10%--queued_spin_lock_slowpath
             |                     |
             |                      --0.65%--_raw_spin_lock
             |
             |--1.55%--page_frag_free
             |
              --1.44%--skb_release_data

Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator.  The lock contention happens during mlx5 DMA TX completion
cycle.  And the page allocator cannot keep up at these speeds.[2]

I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]

The free path as pointed out by Jesper is:
skb_free_head()
  -> skb_free_frag()
    -> page_frag_free()
And the pages being freed on this path are order-0 pages.

Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.

With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone.  Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.

[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.comSigned-off-by: NAaron Lu <aaron.lu@intel.com>
Reported-by: NPawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Acked-by: NPankaj gupta <pagupta@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 3e8fc007 upstream.

Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list.  As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.

This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone.  A private report indicated that kernel build
times were excessive with extremely high system CPU usage.  A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.

This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system.  It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.

mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.

kernbench
                                5.4.0-rc3              5.4.0-rc3
                                  vanilla           resetpcpu-v2
Amean     user-256    13249.50 (   0.00%)    16401.31 * -23.79%*
Amean     syst-256    14760.30 (   0.00%)     4448.39 *  69.86%*
Amean     elsp-256      162.42 (   0.00%)      119.13 *  26.65%*
Stddev    user-256       42.97 (   0.00%)       19.15 (  55.43%)
Stddev    syst-256      336.87 (   0.00%)        6.71 (  98.01%)
Stddev    elsp-256        2.46 (   0.00%)        0.39 (  84.03%)

                   5.4.0-rc3    5.4.0-rc3
                     vanilla resetpcpu-v2
Duration User       39766.24     49221.79
Duration System     44298.10     13361.67
Duration Elapsed      519.11       388.87

The patch reduces system CPU usage by 69.86% and total build time by
26.65%.  The variance of system CPU usage is also much reduced.

Before, this was the breakdown of batch and high values over all zones
was:

    256               batch: 1
    256               batch: 63
    512               batch: 7
    256               high:  0
    256               high:  378
    512               high:  42

512 pcpu pagesets had a batch limit of 7 and a high limit of 42.  After
the patch:

    256               batch: 1
    768               batch: 63
    256               high:  0
    768               high:  378

[mgorman@techsingularity.net: fix merge/linkage snafu]
  Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>	[4.1+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.4-rc1
commit 49433085
category: bugfix
bugzilla: 23291
CVE: NA

-------------------------------------------------

Mike Kravetz reports that "hugetlb allocations could stall for minutes or
hours when should_compact_retry() would return true more often then it
should.  Specifically, this was in the case where compact_result was
COMPACT_DEFERRED and COMPACT_PARTIAL_SKIPPED and no progress was being
made."

The problem is that the compaction_withdrawn() test in
should_compact_retry() includes compaction outcomes that are only possible
on low compaction priority, and results in a retry without increasing the
priority.  This may result in furter reclaim, and more incomplete
compaction attempts.

With this patch, compaction priority is raised when possible, or
should_compact_retry() returns false.

The COMPACT_SKIPPED result doesn't really fit together with the other
outcomes in compaction_withdrawn(), as that's a result caused by
insufficient order-0 pages, not due to low compaction priority.  With this
patch, it is moved to a new compaction_needs_reclaim() function, and for
that outcome we keep the current logic of retrying if it looks like
reclaim will be able to help.

Link: http://lkml.kernel.org/r/20190806014744.15446-4-mike.kravetz@oracle.comReported-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Tested-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NChenwandun <chenwandun@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.1-rc1
commit 60cd4bcd62384cfa1e5890cebacccf08b3161156
category: bugfix
bugzilla: 21077
CVE: NA

------------------------------------------------

Move the memcg_kmem_enabled() checks into memcg kmem charge/uncharge
functions, so, the users don't have to explicitly check that condition.

This is purely code cleanup patch without any functional change.  Only
the order of checks in memcg_charge_slab() can potentially be changed
but the functionally it will be same.  This should not matter as
memcg_charge_slab() is not in the hot path.

Link: http://lkml.kernel.org/r/20190103161203.162375-1-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

hulk inclusion
category: feature
bugzilla: 13228
CVE: NA
---------------------------

Deferred struct page initialization currently runs one thread per node,
but this is a bottleneck during boot on big machines, so use ktask
within each pgdatinit thread to parallelize the struct page
initialization, allowing the system to take better advantage of its
memory bandwidth.

Because the system is not fully up yet and most CPUs are idle, use more
than the default maximum number of ktask threads.  The kernel doesn't
know the memory bandwidth of a given system to get the most efficient
number of threads, so there's some guesswork involved.  In testing, a
reasonable value turned out to be about a quarter of the CPUs on the
node.

__free_pages_core used to increase the zone's managed page count by the
number of pages being freed.  To accommodate multiple threads, however,
account the number of freed pages with an atomic shared across the ktask
threads and bump the managed page count with it after ktask is finished.

Test:    Boot the machine with deferred struct page init three times

Machine: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz, 88 CPUs, 503G memory,
         2 sockets

kernel                   speedup   max time per   stdev
                                   node (ms)

baseline (4.15-rc2)                        5860     8.6
ktask                      9.56x            613    12.4
Signed-off-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NHongbo Yao <yaohongbo@huawei.com>
Reviewed-by: NXie XiuQi <xiexiuqi@huawei.com>
Tested-by: NHongbo Yao <yaohongbo@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 299c83dc ]

342332e6 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
later patches rewrote the calculation of node spanned pages.

e506b996 ("mem-hotplug: fix node spanned pages when we have a movable
node"), but the current code still has problems,

When we have a node with only zone_movable and the node id is not zero,
the size of node spanned pages is double added.

That's because we have an empty normal zone, and zone_start_pfn or
zone_end_pfn is not between arch_zone_lowest_possible_pfn and
arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
range just like the commit <96e907d1> (bootmem: Reimplement
__absent_pages_in_range() using for_each_mem_pfn_range()).

e.g.
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
  Node 0: 0x0000000100000000
  Node 1: 0x0000000140000000
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000bffdffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
  node   1: [mem 0x0000000140000000-0x000000023fffffff]

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0x100000    present:0x100000	absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 2097152
node_spanned_pages:2097152
Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
cma-reserved)

It shows that the current memory of node 1 is double added.
After this patch, the problem is fixed.

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0	    present:0		absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 1048576
node_spanned_pages:1048576
memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
cma-reserved)

Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.comSigned-off-by: NLinxu Fang <fanglinxu@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

hulk inclusion
category: performance
bugzilla: 11028
CVE: NA

-------------------------------------------------

Commit b92df1de ("mm: page_alloc: skip over regions of invalid pfns
where possible") optimized the loop in memmap_init_zone(). But it causes
possible panic bug. So Daniel Vacek reverted it later.

But as suggested by Daniel Vacek, it is fine to using memblock to skip
gaps and finding next valid frame with CONFIG_HAVE_ARCH_PFN_VALID.
Daniel said:
"On arm and arm64, memblock is used by default. But generic version of
pfn_valid() is based on mem sections and memblock_next_valid_pfn() does
not always return the next valid one but skips more resulting in some
valid frames to be skipped (as if they were invalid). And that's why
kernel was eventually crashing on some !arm machines."

About the performance consideration:
As said by James in b92df1de,
"I have tested this patch on a virtual model of a Samurai CPU
with a sparse memory map.  The kernel boot time drops from 109 to
62 seconds."

Thus it would be better if we remain memblock_next_valid_pfn on arm/arm64.
Suggested-by: NDaniel Vacek <neelx@redhat.com>
Signed-off-by: NJia He <jia.he@hxt-semitech.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-v5.2-rc1
commit 63931eb9
category: bugfix
bugzilla: 16020
CVE: NA

-------------------------------------------------

alloc_pages_exact*() allocates a page of sufficient order and then splits
it to return only the number of pages requested.  That makes it
incompatible with __GFP_COMP, because compound pages cannot be split.

As shown by [1] things may silently work until the requested size
(possibly depending on user) stops being power of two.  Then for
CONFIG_DEBUG_VM, BUG_ON() triggers in split_page().  Without
CONFIG_DEBUG_VM, consequences are unclear.

There are several options here, none of them great:

1) Don't do the splitting when __GFP_COMP is passed, and return the
   whole compound page.  However if caller then returns it via
   free_pages_exact(), that will be unexpected and the freeing actions
   there will be wrong.

2) Warn and remove __GFP_COMP from the flags.  But the caller may have
   really wanted it, so things may break later somewhere.

3) Warn and return NULL.  However NULL may be unexpected, especially
   for small sizes.

This patch picks option 2, because as Michal Hocko put it: "callers wanted
it" is much less probable than "caller is simply confused and more gfp
flags is surely better than fewer".

[1] https://lore.kernel.org/lkml/20181126002805.GI18977@shao2-debian/T/#u

Link: http://lkml.kernel.org/r/0c6393eb-b28d-4607-c386-862a71f09de6@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: feature
bugzilla: 11082
CVE: NA
-----------------

CDM nodes should not be part of mems_allowed, However,
It must be allowed to alloc from CDM node, when mpol->mode was MPOL_BIND.
Signed-off-by: NLijun Fang <fanglijun3@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: feature
bugzilla: 11082
CVE: NA
-------------------

__GFP_THISNODE specifically asks the memory to be allocated from the given
node. Not all the requests that end up in __alloc_pages_nodemask() are
originated from the process context where cpuset makes more sense. The
current condition enforces cpuset limitation on every allocation whether
originated from process context or not which prevents __GFP_THISNODE
mandated allocations to come from the specified node. In context of the
coherent device memory node which is isolated from all cpuset nodemask
in the system, it prevents the only way of allocation into it which has
been changed with this patch.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NLijun Fang <fanglijun3@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: feature
bugzilla: 11082
CVE: NA
-------------------

This implements allocation isolation for CDM nodes in buddy allocator by
discarding CDM memory zones all the time except in the cases where the gfp
flag has got __GFP_THISNODE or the nodemask contains CDM nodes in cases
where it is non NULL (explicit allocation request in the kernel or user
process MPOL_BIND policy based requests).
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NLijun Fang <fanglijun3@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: feature
bugzilla: 11082
CVE: NA
-------------------

Kernel allocation to CDM node has already been prevented by putting it's
entire memory in ZONE_MOVABLE. But the CDM nodes must also be isolated
from implicit allocations happening on the system.

Any isolation seeking CDM node requires isolation from implicit memory
allocations from user space but at the same time there should also have
an explicit way to do the memory allocation.

Platform node's both zonelists are fundamental to where the memory comes
from when there is an allocation request. In order to achieve these two
objectives as stated above, zonelists building process has to change as
both zonelists (i.e FALLBACK and NOFALLBACK) gives access to the node's
memory zones during any kind of memory allocation. The following changes
are implemented in this regard.

* CDM node's zones are not part of any other node's FALLBACK zonelist
* CDM node's FALLBACK list contains it's own memory zones followed by
  all system RAM zones in regular order as before
* CDM node's zones are part of it's own NOFALLBACK zonelist

These above changes ensure the following which in turn isolates the CDM
nodes as desired.

* There wont be any implicit memory allocation ending up in the CDM node
* Only __GFP_THISNODE marked allocations will come from the CDM node
* CDM node memory can be allocated through mbind(MPOL_BIND) interface
* System RAM memory will be used as fallback option in regular order in
  case the CDM memory is insufficient during targted allocation request

Sample zonelist configuration:

[NODE (0)]						RAM
        ZONELIST_FALLBACK (0xc00000000140da00)
                (0) (node 0) (DMA     0xc00000000140c000)
                (1) (node 1) (DMA     0xc000000100000000)
        ZONELIST_NOFALLBACK (0xc000000001411a10)
                (0) (node 0) (DMA     0xc00000000140c000)
[NODE (1)]						RAM
        ZONELIST_FALLBACK (0xc000000100001a00)
                (0) (node 1) (DMA     0xc000000100000000)
                (1) (node 0) (DMA     0xc00000000140c000)
        ZONELIST_NOFALLBACK (0xc000000100005a10)
                (0) (node 1) (DMA     0xc000000100000000)
[NODE (2)]						CDM
        ZONELIST_FALLBACK (0xc000000001427700)
                (0) (node 2) (Movable 0xc000000001427080)
                (1) (node 0) (DMA     0xc00000000140c000)
                (2) (node 1) (DMA     0xc000000100000000)
        ZONELIST_NOFALLBACK (0xc00000000142b710)
                (0) (node 2) (Movable 0xc000000001427080)
[NODE (3)]						CDM
        ZONELIST_FALLBACK (0xc000000001431400)
                (0) (node 3) (Movable 0xc000000001430d80)
                (1) (node 0) (DMA     0xc00000000140c000)
                (2) (node 1) (DMA     0xc000000100000000)
        ZONELIST_NOFALLBACK (0xc000000001435410)
                (0) (node 3) (Movable 0xc000000001430d80)
[NODE (4)]						CDM
        ZONELIST_FALLBACK (0xc00000000143b100)
                (0) (node 4) (Movable 0xc00000000143aa80)
                (1) (node 0) (DMA     0xc00000000140c000)
                (2) (node 1) (DMA     0xc000000100000000)
        ZONELIST_NOFALLBACK (0xc00000000143f110)
                (0) (node 4) (Movable 0xc00000000143aa80)
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NLijun Fang <fanglijun3@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: feature
bugzilla: 11082
CVE: NA
-------------------

There are certain devices like specialized accelerator, GPU cards, network
cards, FPGA cards etc which might contain onboard memory which is coherent
along with the existing system RAM while being accessed either from the CPU
or from the device. They share some similar properties with that of normal
system RAM but at the same time can also be different with respect to
system RAM.

User applications might be interested in using this kind of coherent device
memory explicitly or implicitly along side the system RAM utilizing all
possible core memory functions like anon mapping (LRU), file mapping (LRU),
page cache (LRU), driver managed (non LRU), HW poisoning, NUMA migrations
etc. To achieve this kind of tight integration with core memory subsystem,
the device onboard coherent memory must be represented as a memory only
NUMA node. At the same time arch must export some kind of a function to
identify of this node as a coherent device memory not any other regular
cpu less memory only NUMA node.

After achieving the integration with core memory subsystem coherent device
memory might still need some special consideration inside the kernel. There
can be a variety of coherent memory nodes with different expectations from
the core kernel memory. But right now only one kind of special treatment is
considered which requires certain isolation.

Now consider the case of a coherent device memory node type which requires
isolation. This kind of coherent memory is onboard an external device
attached to the system through a link where there is always a chance of a
link failure taking down the entire memory node with it. More over the
memory might also have higher chance of ECC failure as compared to the
system RAM. Hence allocation into this kind of coherent memory node should
be regulated. Kernel allocations must not come here. Normal user space
allocations too should not come here implicitly (without user application
knowing about it). This summarizes isolation requirement of certain kind of
coherent device memory node as an example. There can be different kinds of
isolation requirement also.

Some coherent memory devices might not require isolation altogether after
all. Then there might be other coherent memory devices which might require
some other special treatment after being part of core memory representation
. For now, will look into isolation seeking coherent device memory node not
the other ones.

To implement the integration as well as isolation, the coherent memory node
must be present in N_MEMORY and a new N_COHERENT_DEVICE node mask inside
the node_states[] array. During memory hotplug operations, the new nodemask
N_COHERENT_DEVICE is updated along with N_MEMORY for these coherent device
memory nodes. This also creates the following new sysfs based interface to
list down all the coherent memory nodes of the system.

	/sys/devices/system/node/is_cdm_node

Architectures must export function arch_check_node_cdm() which identifies
any coherent device memory node in case they enable CONFIG_COHERENT_DEVICE.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
[Backported to 4.19
-remove set or clear node state for memory_hotplug
-separate CONFIG_COHERENT and CPUSET]
Signed-off-by: NLijun Fang <fanglijun3@huawei.com>
Reviewed-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.1-rc6
commit 1a9f2191
category: bugfix
bugzilla: 14055
CVE: NA

-------------------------------------------------

has_unmovable_pages() is used by allocating CMA and gigantic pages as
well as the memory hotplug.  The later doesn't know how to offline CMA
pool properly now, but if an unused (free) CMA page is encountered, then
has_unmovable_pages() happily considers it as a free memory and
propagates this up the call chain.  Memory offlining code then frees the
page without a proper CMA tear down which leads to an accounting issues.
Moreover if the same memory range is onlined again then the memory never
gets back to the CMA pool.

State after memory offline:

 # grep cma /proc/vmstat
 nr_free_cma 205824

 # cat /sys/kernel/debug/cma/cma-kvm_cma/count
 209920

Also, kmemleak still think those memory address are reserved below but
have already been used by the buddy allocator after onlining.  This
patch fixes the situation by treating CMA pageblocks as unmovable except
when has_unmovable_pages() is called as part of CMA allocation.

  Offlined Pages 4096
  kmemleak: Cannot insert 0xc000201f7d040008 into the object search tree (overlaps existing)
  Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    create_object+0x344/0x380
    __kmalloc_node+0x3ec/0x860
    kvmalloc_node+0x58/0x110
    seq_read+0x41c/0x620
    __vfs_read+0x3c/0x70
    vfs_read+0xbc/0x1a0
    ksys_read+0x7c/0x140
    system_call+0x5c/0x70
  kmemleak: Kernel memory leak detector disabled
  kmemleak: Object 0xc000201cc8000000 (size 13757317120):
  kmemleak:   comm "swapper/0", pid 0, jiffies 4294937297
  kmemleak:   min_count = -1
  kmemleak:   count = 0
  kmemleak:   flags = 0x5
  kmemleak:   checksum = 0
  kmemleak:   backtrace:
       cma_declare_contiguous+0x2a4/0x3b0
       kvm_cma_reserve+0x11c/0x134
       setup_arch+0x300/0x3f8
       start_kernel+0x9c/0x6e8
       start_here_common+0x1c/0x4b0
  kmemleak: Automatic memory scanning thread ended

[cai@lca.pw: use is_migrate_cma_page() and update commit log]
  Link: http://lkml.kernel.org/r/20190416170510.20048-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190413002623.8967-1-cai@lca.pwSigned-off-by: NQian Cai <cai@lca.pw>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.1-rc3
commit 9b7ea46a82b31c74a37e6ff1c2a1df7d53e392ab
category: bugfix
bugzilla: 13472
CVE: NA

-------------------------------------------------

Commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded
memory to zones until online") introduced move_pfn_range_to_zone() which
calls memmap_init_zone() during onlining a memory block.
memmap_init_zone() will reset pagetype flags and makes migrate type to
be MOVABLE.

However, in __offline_pages(), it also call undo_isolate_page_range()
after offline_isolated_pages() to do the same thing.  Due to commit
2ce13640 ("mm: __first_valid_page skip over offline pages") changed
__first_valid_page() to skip offline pages, undo_isolate_page_range()
here just waste CPU cycles looping around the offlining PFN range while
doing nothing, because __first_valid_page() will return NULL as
offline_isolated_pages() has already marked all memory sections within
the pfn range as offline via offline_mem_sections().

Also, after calling the "useless" undo_isolate_page_range() here, it
reaches the point of no returning by notifying MEM_OFFLINE.  Those pages
will be marked as MIGRATE_MOVABLE again once onlining.  The only thing
left to do is to decrease the number of isolated pageblocks zone counter
which would make some paths of the page allocation slower that the above
commit introduced.

Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages
on ppc64, an "int" should still be enough to represent the number of
pageblocks there.  Fix an incorrect comment along the way.

[cai@lca.pw: v4]
  Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw
Fixes: 2ce13640 ("mm: __first_valid_page skip over offline pages")
Signed-off-by: NQian Cai <cai@lca.pw>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-v5.0-rc1
commit d381c54760dcfad23743da40516e7e003d73952a
category: bugfix
bugzilla: 13472
CVE: NA

------------------------------------------------

Heiko has complained that his log is swamped by warnings from
has_unmovable_pages

[   20.536664] page dumped because: has_unmovable_pages
[   20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0
[   20.536794] flags: 0x3fffe0000010200(slab|head)
[   20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600
[   20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
[   20.536797] page dumped because: has_unmovable_pages
[   20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0
[   20.536815] flags: 0x7fffe0000000000()
[   20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000
[   20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000

which are not triggered by the memory hotplug but rather CMA allocator.
The original idea behind dumping the page state for all call paths was
that these messages will be helpful debugging failures.  From the above it
seems that this is not the case for the CMA path because we are lacking
much more context.  E.g the second reported page might be a CMA allocated
page.  It is still interesting to see a slab page in the CMA area but it
is hard to tell whether this is bug from the above output alone.

Address this issue by dumping the page state only on request.  Both
start_isolate_page_range and has_unmovable_pages already have an argument
to ignore hwpoison pages so make this argument more generic and turn it
into flags and allow callers to combine non-default modes into a mask.
While we are at it, has_unmovable_pages call from
is_pageblock_removable_nolock (sysfs removable file) is questionable to
report the failure so drop it from there as well.

Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.0-rc1
commit 2932c8b0
category: bugfix
bugzilla: 13472
CVE: NA

------------------------------------------------

There is only very limited information printed when the memory offlining
fails:

[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff

This tells us that the failure is triggered by the userspace intervention
but it doesn't tell us much more about the underlying reason.  It might be
that the page migration failes repeatedly and the userspace timeout
expires and send a signal or it might be some of the earlier steps
(isolation, memory notifier) takes too long.

If the migration failes then it would be really helpful to see which page
that and its state.  The same applies to the isolation phase.  If we fail
to isolate a page from the allocator then knowing the state of the page
would be helpful as well.

Dump the page state that fails to get isolated or migrated.  This will
tell us more about the failure and what to focus on during debugging.

[akpm@linux-foundation.org: add missing printk arg]
[mhocko@suse.com: tweak dump_page() `reason' text]
  Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org
Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 2c2ade81 ]

The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum
number of references that we might need to create in the fastpath later,
the bump-allocation fastpath only has to modify the non-atomic bias value
that tracks the number of extra references we hold instead of the atomic
refcount. The maximum number of allocations we can serve (under the
assumption that no allocation is made with size 0) is nc->size, so that's
the bias used.

However, even when all memory in the allocation has been given away, a
reference to the page is still held; and in the `offset < 0` slowpath, the
page may be reused if everyone else has dropped their references.
This means that the necessary number of references is actually
`nc->size+1`.

Luckily, from a quick grep, it looks like the only path that can call
page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which
requires CAP_NET_ADMIN in the init namespace and is only intended to be
used for kernel testing and fuzzing.

To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the
`offset < 0` path, below the virt_to_page() call, and then repeatedly call
writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI,
with a vector consisting of 15 elements containing 1 byte each.
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.0
commit 4117992df66a
category: bugfix
bugzilla: 11620
CVE: NA

------------------------------------------------

KASAN does not play well with the page poisoning (CONFIG_PAGE_POISONING).
It triggers false positives in the allocation path,

BUG: KASAN: use-after-free in memchr_inv+0x2ea/0x330
Read of size 8 at addr ffff88881f800000 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1+ #54
Call Trace:
 dump_stack+0xe0/0x19a
 print_address_description.cold.2+0x9/0x28b
 kasan_report.cold.3+0x7a/0xb5
 __asan_report_load8_noabort+0x19/0x20
 memchr_inv+0x2ea/0x330
 kernel_poison_pages+0x103/0x3d5
 get_page_from_freelist+0x15e7/0x4d90

because KASAN has not yet unpoisoned the shadow page for allocation before
it checks memchr_inv() but only found a stale poison pattern.

Also, false positives in free path,

BUG: KASAN: slab-out-of-bounds in kernel_poison_pages+0x29e/0x3d5
Write of size 4096 at addr ffff8888112cc000 by task swapper/0/1
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1+ #55
Call Trace:
 dump_stack+0xe0/0x19a
 print_address_description.cold.2+0x9/0x28b
 kasan_report.cold.3+0x7a/0xb5
 check_memory_region+0x22d/0x250
 memset+0x28/0x40
 kernel_poison_pages+0x29e/0x3d5
 __free_pages_ok+0x75f/0x13e0

due to KASAN adds poisoned redzones around slab objects, but the page
poisoning needs to poison the whole page.

Link: http://lkml.kernel.org/r/20190114233405.67843-1-cai@lca.pwSigned-off-by: NQian Cai <cai@lca.pw>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euler inclusion
category: bugfix
CVE: NA
Bugzilla: 9580

---------------------------

Just add Kconfig to the feature.
Signed-off-by: Nzhongjiang <zhongjiang@huawei.com>
Reviewed-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

euleros inclusion
category: feature
feature: pagecache limit

add proc sysctl interface to set pagecache limit for reclaim memory
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJing xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 3c0c12cc ]

When CONFIG_KASAN is enabled on large memory SMP systems, the deferrred
pages initialization can take a long time.  Below were the reported init
times on a 8-socket 96-core 4TB IvyBridge system.

  1) Non-debug kernel without CONFIG_KASAN
     [    8.764222] node 1 initialised, 132086516 pages in 7027ms

  2) Debug kernel with CONFIG_KASAN
     [  146.288115] node 1 initialised, 132075466 pages in 143052ms

So the page init time in a debug kernel was 20X of the non-debug kernel.
The long init time can be problematic as the page initialization is done
with interrupt disabled.  In this particular case, it caused the
appearance of following warning messages as well as NMI backtraces of all
the cores that were doing the initialization.

[   68.240049] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   68.241000] rcu: 	25-...0: (100 ticks this GP) idle=b72/1/0x4000000000000000 softirq=915/915 fqs=16252
[   68.241000] rcu: 	44-...0: (95 ticks this GP) idle=49a/1/0x4000000000000000 softirq=788/788 fqs=16253
[   68.241000] rcu: 	54-...0: (104 ticks this GP) idle=03a/1/0x4000000000000000 softirq=721/825 fqs=16253
[   68.241000] rcu: 	60-...0: (103 ticks this GP) idle=cbe/1/0x4000000000000000 softirq=637/740 fqs=16253
[   68.241000] rcu: 	72-...0: (105 ticks this GP) idle=786/1/0x4000000000000000 softirq=536/641 fqs=16253
[   68.241000] rcu: 	84-...0: (99 ticks this GP) idle=292/1/0x4000000000000000 softirq=537/537 fqs=16253
[   68.241000] rcu: 	111-...0: (104 ticks this GP) idle=bde/1/0x4000000000000000 softirq=474/476 fqs=16253
[   68.241000] rcu: 	(detected by 13, t=65018 jiffies, g=249, q=2)

The long init time was mainly caused by the call to kasan_free_pages() to
poison the newly initialized pages.  On a 4TB system, we are talking about
almost 500GB of memory probably on the same node.

In reality, we may not need to poison the newly initialized pages before
they are ever allocated.  So KASAN poisoning of freed pages before the
completion of deferred memory initialization is now disabled.  Those pages
will be properly poisoned when they are allocated or freed after deferred
pages initialization is done.

With this change, the new page initialization time became:

[   21.948010] node 1 initialised, 132075466 pages in 18702ms

This was still about double the non-debug kernel time, but was much
better than before.

Link: http://lkml.kernel.org/r/1544459388-8736-1-git-send-email-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 4aa9fc2a upstream.

This reverts commit 2830bf6f.

The underlying assumption that one sparse section belongs into a single
numa node doesn't hold really. Robert Shteynfeld has reported a boot
failure. The boot log was not captured but his memory layout is as
follows:

  Early memory node ranges
    node   1: [mem 0x0000000000001000-0x0000000000090fff]
    node   1: [mem 0x0000000000100000-0x00000000dbdf8fff]
    node   1: [mem 0x0000000100000000-0x0000001423ffffff]
    node   0: [mem 0x0000001424000000-0x0000002023ffffff]

This means that node0 starts in the middle of a memory section which is
also in node1.  memmap_init_zone tries to initialize padding of a
section even when it is outside of the given pfn range because there are
code paths (e.g.  memory hotplug) which assume that the full worth of
memory section is always initialized.

In this particular case, though, such a range is already intialized and
most likely already managed by the page allocator.  Scribbling over
those pages corrupts the internal state and likely blows up when any of
those pages gets used.
Reported-by: NRobert Shteynfeld <robert.shteynfeld@gmail.com>
Fixes: 2830bf6f ("mm, memory_hotplug: initialize struct pages for the full memory section")
Cc: stable@kernel.org
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 17e2e7d7e1b83fa324b3f099bfe426659aa3c2a4 upstream.

While playing with gigantic hugepages and memory_hotplug, I triggered
the following #PF when "cat memoryX/removable":

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1481 Comm: cat Tainted: G            E     4.20.0-rc6-mm1-1-default+ #18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:has_unmovable_pages+0x154/0x210
  Call Trace:
   is_mem_section_removable+0x7d/0x100
   removable_show+0x90/0xb0
   dev_attr_show+0x1c/0x50
   sysfs_kf_seq_show+0xca/0x1b0
   seq_read+0x133/0x380
   __vfs_read+0x26/0x180
   vfs_read+0x89/0x140
   ksys_read+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is we do not pass the Head to page_hstate(), and so, the call
to compound_order() in page_hstate() returns 0, so we end up checking
all hstates's size to match PAGE_SIZE.

Obviously, we do not find any hstate matching that size, and we return
NULL.  Then, we dereference that NULL pointer in
hugepage_migration_supported() and we got the #PF from above.

Fix that by getting the head page before calling page_hstate().

Also, since gigantic pages span several pageblocks, re-adjust the logic
for skipping pages.  While are it, we can also get rid of the
round_up().

[osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal]
  Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de
Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.deSigned-off-by: NOscar Salvador <osalvador@suse.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2830bf6f05fb3e05bc4743274b806c821807a684 upstream.

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct page access from
is_mem_section_removable() or test_pages_in_a_zone() function triggered
by memory_hotplug sysfs handlers:

Here are the the panic examples:
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_VM_PGFLAGS=y

 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( test_pages_in_a_zone+0xde/0x160)
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

 kernel parameter mem=3075M
 --------------------------
 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( is_mem_section_removable+0xb4/0x190)
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix the problem by initializing the last memory section of each zone in
memmap_init_zone() till the very end, even if it goes beyond the zone end.

Michal said:

: This has alwways been problem AFAIU.  It just went unnoticed because we
: have zeroed memmaps during allocation before f7f99100 ("mm: stop
: zeroing memory during allocation in vmemmap") and so the above test
: would simply skip these ranges as belonging to zone 0 or provided a
: garbage.
:
: So I guess we do care for post f7f99100 kernels mostly and
: therefore Fixes: f7f99100 ("mm: stop zeroing memory during
: allocation in vmemmap")

Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: NMikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: NMichal Hocko <mhocko@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NMikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: NMikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]

init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally.  This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

  * free_area_init_core()
  * move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically.  While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

   -m 4G,slots=32,maxmem=32G \
   -smp 4,maxcpus=8          \
   -numa node,nodeid=0,mem=4G,cpus=0-3 \
   -numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

   cpu-add [3-7]

2. hot-add memory to nod1

   object_add memory-backend-ram,id=ram0,size=1G
   device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

   echo online_movable > memory47/state
   echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
 "Having an incorrect nr_zones might result in all sorts of problems
  which would be quite hard to debug (e.g. reclaim not considering the
  movable zone). I do not expect many users would suffer from this it
  but still this is trivial and obviously right thing to do so
  backporting to the stable tree shouldn't be harmful (last famous
  words)"

Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c63ae43ba53bc432b414fd73dd5f4b01fcb1ab43 ]

Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: NKyungtae Kim <kt0755@gmail.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9d7899999c62c1a81129b76d2a6ecbc4655e1597 ]

Page state checks are racy.  Under a heavy memory workload (e.g.  stress
-m 200 -t 2h) it is quite easy to hit a race window when the page is
allocated but its state is not fully populated yet.  A debugging patch to
dump the struct page state shows

  has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0
  page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1
  flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked)

Note that the state has been checked for both PageLRU and PageSwapBacked
already.  Closing this race completely would require some sort of retry
logic.  This can be tricky and error prone (think of potential endless
or long taking loops).

Workaround this problem for movable zones at least.  Such a zone should
only contain movable pages.  Commit 15c30bc0 ("mm, memory_hotplug:
make has_unmovable_pages more robust") has told us that this is not
strictly true though.  Bootmem pages should be marked reserved though so
we can move the original check after the PageReserved check.  Pages from
other zones are still prone to races but we even do not pretend that
memory hotremove works for those so pre-mature failure doesn't hurt that
much.

Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org
Fixes: 15c30bc0 ("mm, memory_hotplug: make has_unmovable_pages more robust")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NBaoquan He <bhe@redhat.com>
Tested-by: NBaoquan He <bhe@redhat.com>
Acked-by: NBaoquan He <bhe@redhat.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Remove the leftover pglist_data::numabalancing_migrate_lock and its
initialization, we stopped using this lock with:

  efaffc5e ("mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration")

[ mingo: Rewrote the changelog. ]
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1538824999-31230-1-git-send-email-srikar@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Rate limiting of page migrations due to automatic NUMA balancing was
introduced to mitigate the worst-case scenario of migrating at high
frequency due to false sharing or slowly ping-ponging between nodes.
Since then, a lot of effort was spent on correctly identifying these
pages and avoiding unnecessary migrations and the safety net may no longer
be required.

Jirka Hladky reported a regression in 4.17 due to a scheduler patch that
avoids spreading STREAM tasks wide prematurely. However, once the task
was properly placed, it delayed migrating the memory due to rate limiting.
Increasing the limit fixed the problem for him.

Currently, the limit is hard-coded and does not account for the real
capabilities of the hardware. Even if an estimate was attempted, it would
not properly account for the number of memory controllers and it could
not account for the amount of bandwidth used for normal accesses. Rather
than fudging, this patch simply eliminates the rate limiting.

However, Jirka reports that a STREAM configuration using multiple
processes achieved similar performance to 4.16. In local tests, this patch
improved performance of STREAM relative to the baseline but it is somewhat
machine-dependent. Most workloads show little or not performance difference
implying that there is not a heavily reliance on the throttling mechanism
and it is safe to remove.

STREAM on 2-socket machine
                         4.19.0-rc5             4.19.0-rc5
                         numab-v1r1       noratelimit-v1r1
MB/sec copy     43298.52 (   0.00%)    44673.38 (   3.18%)
MB/sec scale    30115.06 (   0.00%)    31293.06 (   3.91%)
MB/sec add      32825.12 (   0.00%)    34883.62 (   6.27%)
MB/sec triad    32549.52 (   0.00%)    34906.60 (   7.24%
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Reviewed-by: NRik van Riel <riel@surriel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-2-mgorman@techsingularity.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

When scanning for movable pages, filter out Hugetlb pages if hugepage
migration is not supported.  Without this we hit infinte loop in
__offline_pages() where we do

	pfn = scan_movable_pages(start_pfn, end_pfn);
	if (pfn) { /* We have movable pages */
		ret = do_migrate_range(pfn, end_pfn);
		goto repeat;
	}

Fix this by checking hugepage_migration_supported both in
has_unmovable_pages which is the primary backoff mechanism for page
offlining and for consistency reasons also into scan_movable_pages
because it doesn't make any sense to return a pfn to non-migrateable
huge page.

This issue was revealed by, but not caused by 72b39cfc ("mm,
memory_hotplug: do not fail offlining too early").

Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com
Fixes: 72b39cfc ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: NHaren Myneni <haren@linux.vnet.ibm.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The conversion of the hotplug notifiers to a state machine left the
notifier.h includes around in some places. Remove them.
Signed-off-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1535114033-4605-1-git-send-email-mojha@codeaurora.org

A process can be killed with SIGBUS(BUS_MCEERR_AR) when it tries to
allocate a page that was just freed on the way of soft-offline.  This is
undesirable because soft-offline (which is about corrected error) is
less aggressive than hard-offline (which is about uncorrected error),
and we can make soft-offline fail and keep using the page for good
reason like "system is busy."

Two main changes of this patch are:

- setting migrate type of the target page to MIGRATE_ISOLATE. As done
  in free_unref_page_commit(), this makes kernel bypass pcplist when
  freeing the page. So we can assume that the page is in freelist just
  after put_page() returns,

- setting PG_hwpoison on free page under zone->lock which protects
  freelists, so this allows us to avoid setting PG_hwpoison on a page
  that is decided to be allocated soon.

[akpm@linux-foundation.org: tweak set_hwpoison_free_buddy_page() comment]
Link: http://lkml.kernel.org/r/1531452366-11661-3-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NXishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Tested-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zy.zhengyi@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, whenever a new node is created/re-used from the memhotplug
path, we call free_area_init_node()->free_area_init_core().  But there is
some code that we do not really need to run when we are coming from such
path.

free_area_init_core() performs the following actions:

1) Initializes pgdat internals, such as spinlock, waitqueues and more.
2) Account # nr_all_pages and # nr_kernel_pages. These values are used later on
   when creating hash tables.
3) Account number of managed_pages per zone, substracting dma_reserved and
   memmap pages.
4) Initializes some fields of the zone structure data
5) Calls init_currently_empty_zone to initialize all the freelists
6) Calls memmap_init to initialize all pages belonging to certain zone

When called from memhotplug path, free_area_init_core() only performs
actions #1 and #4.

Action #2 is pointless as the zones do not have any pages since either the
node was freed, or we are re-using it, eitherway all zones belonging to
this node should have 0 pages.  For the same reason, action #3 results
always in manages_pages being 0.

Action #5 and #6 are performed later on when onlining the pages:
 online_pages()->move_pfn_range_to_zone()->init_currently_empty_zone()
 online_pages()->move_pfn_range_to_zone()->memmap_init_zone()

This patch does two things:

First, moves the node/zone initializtion to their own function, so it
allows us to create a small version of free_area_init_core, where we only
perform:

1) Initialization of pgdat internals, such as spinlock, waitqueues and more
4) Initialization of some fields of the zone structure data

These two functions are: pgdat_init_internals() and zone_init_internals().

The second thing this patch does, is to introduce
free_area_init_core_hotplug(), the memhotplug version of
free_area_init_core():

Currently, we call free_area_init_node() from the memhotplug path.  In
there, we set some pgdat's fields, and call calculate_node_totalpages().
calculate_node_totalpages() calculates the # of pages the node has.

Since the node is either new, or we are re-using it, the zones belonging
to this node should not have any pages, so there is no point to calculate
this now.

Actually, we re-set these values to 0 later on with the calls to:

reset_node_managed_pages()
reset_node_present_pages()

The # of pages per node and the # of pages per zone will be calculated when
onlining the pages:

online_pages()->move_pfn_range()->move_pfn_range_to_zone()->resize_zone_range()
online_pages()->move_pfn_range()->move_pfn_range_to_zone()->resize_pgdat_range()

Also, since free_area_init_core/free_area_init_node will now only get called during early init, let us replace
__paginginit with __init, so their code gets freed up.

[osalvador@techadventures.net: fix section usage]
  Link: http://lkml.kernel.org/r/20180731101752.GA473@techadventures.net
[osalvador@suse.de: v6]
  Link: http://lkml.kernel.org/r/20180801122348.21588-6-osalvador@techadventures.net
Link: http://lkml.kernel.org/r/20180730101757.28058-5-osalvador@techadventures.netSigned-off-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let us move the code between CONFIG_DEFERRED_STRUCT_PAGE_INIT to an inline
function.  Not having an ifdef in the function makes the code more
readable.

Link: http://lkml.kernel.org/r/20180730101757.28058-4-osalvador@techadventures.netSigned-off-by: NOscar Salvador <osalvador@suse.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>