When a user starts and stops filtering at a demux device too quickly
in a very short interval, the user process hangs in uninterruptible sleep,
due to an inconsistency of kthread status in the driver.
The kthread can be stopped before it starts running its thread function,
but the invocation status was partly managed in the kthread function,
which resulted in a double kthread_stop() of one kthread.
Signed-off-by: NAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.

This issue was identified using Coccinelle and the following
semantic patch:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };

@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct i2c_algorithm i = { ... };
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Return 0 instead of -EINVAL in get_frontend if no demod mode is active.
This fixes ie. dvb-fe-tool getting confused and assuming a DVBv3 FE on idle
frontends when the FE has been put to sleep using sleep().

Also, in read_status(), don't immediately return when no demod is active,
so the remaining code has a chance to clear the signal statistics.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Adds a stv0910_single modparm which, when set, configures the stv0910 to
run in single demodulator mode, currently intended for high bit rate
testing.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds all required glue code to support - in conjunction with the new
stv0910 and stv6111 demod/tuner drivers and additionally the lnbh25 LNB
controller driver - all current DVB-S/S2 hardware (bridges and flex
modules) from Digital Devices like the DD CineS2 V7 and V7A, current
S2 V4 DuoFlex modules, and probably all upcoming devices based on this
STV0910/STV6111/LNBH25 hardware stack.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The returned value is required for further evaluation of the exact
demodulator chip (stv090x or stv0910).
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds a frontend driver for the ST STV6111 DVB-S/S2 tuners. Like the
stv0910 demod frontend driver, this driver originates from the Digital
Devices' dddvb vendor driver package as of version 0.9.29, and was cleaned
up aswell. No functionality had to be removed though. Any camel case has
been converted to kernel_case, fixup patch has been proposed upstream.

Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This was missing from the frontend_ops.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Original code at least has some signed/unsigned issues, resulting in
values like 32dBm. Implement signal strength readout to work without
asking the attached tuner, and use a lookup table instead of log calc.
Values reported appear plausible, gathered from feedback from several
testers.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implements stream_id filter and scrambling code setup in start() and also
sets FE_CAN_MULTISTREAM in frontend_ops. This enables the driver to
properly receive and handle multistream transponders, functionality has
been reported working fine by testers with access to such streams, in
conjunction with VDR on the userspace side.

The code snippet originates from the original vendor's dddvb driver
package and has been made working properly with the current in-kernel
DVB core API.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fixes smatch error:

  drivers/media/dvb-frontends/stv0910.c:715 dvbs2_nbch() error: buffer overflow 'nbch[fectype]' 2 <= 28

Also, fixes the nbch array table by adding the DUMMY_PLF element at the top
to match the enums (table element order was off by one before).

Patch sent upstream aswell.

Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This adds a multi frontend driver for the ST STV0910 DVB-S/S2 demodulator
frontends. The driver code originates from the Digital Devices' dddvb
vendor driver package as of version 0.9.29, and has been cleaned up from
core API usage which isn't supported yet in the kernel, and additionally
all obvious style issues have been resolved. All camel case and allcaps
have been converted to kernel_case and lowercase. Patches have been sent
to the vendor package maintainers to fix this aswell. Signal statistics
acquisition has been refactored to comply with standards.

Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NRichard Scobie <r.scobie@clear.net.nz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now that the multiplexer framework is merged, drop the temporary
mmio-mux implementation from the video-mux driver and convert it to use
the multiplexer API.

[mchehab@s-opensource.com: fix a merge conflict at Kconfig]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

gcc-7 notices that we copy a fixed length string into another
string of the same size, with additional characters:

drivers/media/usb/usbvision/usbvision-i2c.c: In function 'usbvision_i2c_register':
drivers/media/usb/usbvision/usbvision-i2c.c:190:36: error: '%d' directive writing between 1 and 11 bytes into a region of size between 0 and 47 [-Werror=format-overflow=]
  sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name,
                                    ^~~~~~~~~~
drivers/media/usb/usbvision/usbvision-i2c.c:190:2: note: 'sprintf' output between 4 and 76 bytes into a destination of size 48

Using snprintf() makes the code more robust in general, but will still
trigger a possible warning about truncation in the string.
We know this won't happen as the template name is always "usbvision", so
we can easily avoid the warning as well by using this as the format string
directly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add helper functions for mbus to/from mplane pixel format conversion.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fixes a crash on Renesas R8A7793 Gose board that uses these "compatible"
entries.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch enables support for non-Bluecherry labeled solo6110
based PCI cards which have 3 x TW2864B chips and one TW2865.
These cards are displayed by lspci -nn as

"Softlogic Co., Ltd. SOLO6110 H.264 Video encoder/decoder [9413:6110]"

Bluecherry cards have 4 x TW2864A. According to datasheet register 0xFF
of TW2864B chips contains value 0x6A or 0x6B depending on revision
which being shifted 3 bits right gives value 0x0d.
Existing version of solo6x10 fails on these cards with

[276582.344942] solo6x10 0000:07:00.0: Probing Softlogic 6110
[276582.402151] solo6x10 0000:07:00.0: Could not initialize any techwell chips
[276582.402781] solo6x10: probe of 0000:07:00.0 failed with error -22
Signed-off-by: NAnton Sviridenko <anton@corp.bluecherry.net>
Acked-by: NAndrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add r8a7796 DRIF bindings.
Signed-off-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/adv748x/adv748x-csi2.c: In function 'adv748x_csi2_init_controls':
drivers/media/i2c/adv748x/adv748x-csi2.c:251:20: warning: variable 'ctrl' set but not used [-Wunused-but-set-variable]
  struct v4l2_ctrl *ctrl;
                    ^~~~
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ADV7481 is an integrated video decoder and combined HDMI/MHL
receiver.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Provide support for the ADV7481 and ADV7482.

The driver is modelled with 4 subdevices to allow simultaneous streaming
from the AFE (Analog front end) and HDMI inputs though two CSI TX
entities.

The HDMI entity is linked to the TXA CSI bus, whilst the AFE is linked
to the TXB CSI bus.

The driver is based on a prototype by Koji Matsuoka in the Renesas BSP,
and an earlier rework by Niklas Söderlund.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Create device tree bindings documentation for the ADV748x.
The ADV748x supports both the ADV7481 and ADV7482 chips which
provide analogue decoding and HDMI receiving capabilities
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Below was the trival error flagged by checkpatch.pl:
ERROR: space prohibited after that open parenthesis '('
Signed-off-by: NShy More <smklearn@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Below was the trivial wanrning flagged by checkpatch.pl
WARNING: Block comments use * on subsequent lines
Signed-off-by: NShy More <smklearn@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch fixed code alignment to open paranthesis.
Semantic should not be affected by this patch.

It has been rebased on top of media_tree atomisp branch
Signed-off-by: NPhilipp Guendisch <philipp.guendisch@fau.de>
Signed-off-by: NChris Baller <chris.baller@gmx.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch fixed comment style. Semantic should not be affected.
There are also two warnings left about too long lines, which
reduce readability if changed.
Signed-off-by: NPhilipp Guendisch <philipp.guendisch@fau.de>
Signed-off-by: NChris Baller <chris.baller@gmx.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>