Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 1月, 2012 2 次提交
    • A
      [CPUFREQ] update lpj only if frequency has changed · d08de0c1
      由 Afzal Mohammed 提交于 
      During scaling up of cpu frequency, loops_per_jiffy
is updated upon invoking PRECHANGE notifier.
If setting to new frequency fails in cpufreq driver,
lpj is left at incorrect value.

Hence update lpj only if cpu frequency is changed,
i.e. upon invoking POSTCHANGE notifier.

Penalty would be that during time period between
changing cpu frequency & invocation of POSTCHANGE
notifier, udelay(x) may not gurantee minimal delay
of 'x' us for frequency scaling up operation.

Perhaps a better solution would be to define
CPUFREQ_ABORTCHANGE & handle accordingly, but then
it would be more intrusive (using ABORTCHANGE may
help drivers also; if any has registered notifier
and expect POST for a PRECHANGE, their needs can
be taken care using ABORT)
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NDave Jones <davej@redhat.com>
      d08de0c1
    • A
      [CPUFREQ] cpufreq:userspace: fix cpu_cur_freq updation · 226dd019
      由 Afzal Mohammed 提交于 
      CPU frequency is guranteed to be changed on notifier callback with
CPUFREQ_POSTCHANGE. Notifier callback with CPUFREQ_PRECHANGE does
not gurantee a change in frequency; after it, if cpufreq driver is
unable to change CPU to new frequency. This results in wrong
information being fed to user (if setting CPU frequency fails)
upon doing like,

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed

Hence in userspace governer update cpu_cur_freq only if notifier
has been called with POSTCHANGE.
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NDave Jones <davej@redhat.com>
      226dd019
  3. 09 12月, 2011 5 次提交
  5. 01 12月, 2011 2 次提交
  7. 30 11月, 2011 4 次提交
    • D
      isdn: avoid copying too long drvid · 5dc5503f
      由 Dan Carpenter 提交于 
      "cfg->drvid" comes from the user so there is a possibility they
didn't NUL terminate it properly.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5dc5503f
    • D
      isdn: make sure strings are null terminated · 746ae30f
      由 Dan Carpenter 提交于 
      These strings come from the user.  We strcpy() them inside
cf_command() so we should check that they are NULL terminated and
return an error if not.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      746ae30f
    • E
      IB: Fix RCU lockdep splats · 580da35a
      由 Eric Dumazet 提交于 
      Commit f2c31e32 ("net: fix NULL dereferences in check_peer_redir()")
forgot to take care of infiniband uses of dst neighbours.

Many thanks to Marc Aurele who provided a nice bug report and feedback.
Reported-by: NMarc Aurele La France <tsi@ualberta.ca>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      580da35a
    • M
      IB/ipoib: Prevent hung task or softlockup processing multicast response · 3874397c
      由 Mike Marciniszyn 提交于 
      This following can occur with ipoib when processing a multicast reponse:

    BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982]
    Modules linked in: ...
    CPU 0:
    Modules linked in: ...
    Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5
    RIP: 0010:[<ffffffff814ddb27>]  [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20
    RSP: 0018:ffff8802119ed860  EFLAGS: 00000246
    0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299
    RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246
    RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000
    R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860
    R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003
    FS:  0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Call Trace:
    [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib]
    [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
    [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
    [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib]
    [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib]
    [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0
    [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0
    [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0
    [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib]
    [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib]
    [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa]
    [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad]
    [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core]
    [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa]
    [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa]
    [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa]
    [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad]
    [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad]
    [<ffffffff81088830>] ? worker_thread+0x170/0x2a0
    [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40
    [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0
    [<ffffffff8108ddf6>] ? kthread+0x96/0xa0
    [<ffffffff8100c1ca>] ? child_rip+0xa/0x20

Coinciding with stack trace is the following message:

    ib0: ib_address_create failed

The code below in ipoib_mcast_join_finish() will note the above
failure in the address handle but otherwise continue:

                ah = ipoib_create_ah(dev, priv->pd, &av);
                if (!ah) {
                        ipoib_warn(priv, "ib_address_create failed\n");
                } else {

The while loop at the bottom of ipoib_mcast_join_finish() will attempt
to send queued multicast packets in mcast->pkt_queue and eventually
end up in ipoib_mcast_send():

        if (!mcast->ah) {
                if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE)
                        skb_queue_tail(&mcast->pkt_queue, skb);
                else {
                        ++dev->stats.tx_dropped;
                        dev_kfree_skb_any(skb);
                }

My read is that the code will requeue the packet and return to the
ipoib_mcast_join_finish() while loop and the stage is set for the
"hung" task diagnostic as the while loop never sees a non-NULL ah, and
will do nothing to resolve.

There are GFP_ATOMIC allocates in the provider routines, so this is
possible and should be dealt with.

The test that induced the failure is associated with a host SM on the
same server during a shutdown.

This patch causes ipoib_mcast_join_finish() to exit with an error
which will flush the queued mcast packets.  Nothing is done to unwind
the QP attached state so that subsequent sends from above will retry
the join.
Reviewed-by: NRam Vepa <ram.vepa@qlogic.com>
Reviewed-by: NGary Leshner <gary.leshner@qlogic.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      3874397c
  9. 29 11月, 2011 8 次提交
    • R
      of/irq: of_irq_init: add check for parent equal to child node · d7fb6d0a
      由 Rob Herring 提交于 
      With the revert of "of/irq: of_irq_find_parent: check for parent equal to
child" (dc937280), we need another way to handle parent node equal
to the child node. This can simply be handled in of_irq_init by checking
for this condition.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Tested-by: NPawel Moll <pawel.moll@arm.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
      d7fb6d0a
    • C
      efivars: add missing parameter to efi_pstore_read() · eee628da
      由 Christoph Fritz 提交于 
      In the case where CONFIG_PSTORE=n, the function efi_pstore_read() doesn't
have the correct list of parameters. This patch provides a definition
of efi_pstore_read() with 'char **buf' added to fix this warning:
"drivers/firmware/efivars.c:609: warning: initialization from".

problem introduced in commit f6f82851Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
      eee628da
    • M
      IB/qib: Fix over-scheduling of QSFP work · 8ee887d7
      由 Mike Marciniszyn 提交于 
      Don't over-schedule QSFP work on driver initialization.  It could end
up being run simultaneously on two different CPUs resulting in bad
EEPROM reads.  In combination with setting the physical IB link state
prior to the IBC being brought out of reset, this can cause the link
state machine to start training early with wrong settings.
Signed-off-by: NMitko Haralanov <mitko@qlogic.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      8ee887d7
    • K
      RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 · 01b225e1
      由 Kumar Sanghvi 提交于 
      Fix logic so that we don't retry with MPAv1 once we have done that
already.  Otherwise, we end up retrying with MPAv1 even when its not
needed on getting peer aborts - and this could lead to kernel panic.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      01b225e1
    • J
      RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic · c34c97ad
      由 Jonathan Lallinger 提交于 
      Fix another place in the code where logic dealing with the t4_cqe was
using the wrong QID.  This fixes the counting logic so that it tests
against the SQ QID instead of the RQ QID when counting RCQES.

Signed-off by: Jonathan Lallinger <jonathan@ogc.us>
Signed-off by: Steve Wise <swise@ogc.us>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      c34c97ad
    • T
      regulator: twl: fix twl4030 support for smps regulators · ba305e31
      由 Tero Kristo 提交于 
      SMPS regulator voltage control differs from the one of the LDO ones.
Current TWL code was using LDO regulator ops for controlling the SMPS
regulators, which fails. This was fixed fixed by adding separate
regulator type which uses correct logic and calculations for the
voltage levels.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
      ba305e31
    • R
      ath9k: Revert change that broke AR928X on Acer Ferrari One · a7322812
      由 Rafael J. Wysocki 提交于 
      Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by
commit 2577c6e8 (ath9k_hw: Add
support for AR946/8x chipsets) that caused a nasty regression to
appear on my Acer Ferrari One (the box locks up entirely at random
times after the wireless has been started without any way to get
debug information out of it).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      a7322812
    • S
      rtlwifi: fix lps_lock deadlock · e55b32c1
      由 Stanislaw Gruszka 提交于 
      rtl_lps_leave can be called from interrupt context, so we have to
disable interrupts when taking lps_lock.

Below is full lockdep info about deadlock:

[   93.815269] =================================
[   93.815390] [ INFO: inconsistent lock state ]
[   93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1
[   93.815556] ---------------------------------
[   93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   93.815832]  (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.815947] {SOFTIRQ-ON-W} state was registered at:
[   93.815947]   [<ffffffff8108e10d>] __lock_acquire+0x369/0xd0c
[   93.815947]   [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e
[   93.815947]   [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79
[   93.815947]   [<ffffffffa025de34>] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi]
[   93.815947]   [<ffffffffa025aec0>] rtl_op_config+0x12a/0x32a [rtlwifi]
[   93.815947]   [<ffffffffa01d614b>] ieee80211_hw_config+0x124/0x129 [mac80211]
[   93.815947]   [<ffffffffa01e0af3>] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211]
[   93.815947]   [<ffffffff81075aa5>] process_one_work+0x205/0x3e7
[   93.815947]   [<ffffffff81076753>] worker_thread+0xda/0x15d
[   93.815947]   [<ffffffff8107a119>] kthread+0xa8/0xb0
[   93.815947]   [<ffffffff814f3184>] kernel_thread_helper+0x4/0x10
[   93.815947] irq event stamp: 547822
[   93.815947] hardirqs last  enabled at (547822): [<ffffffff814ea1a7>] _raw_spin_unlock_irqrestore+0x45/0x61
[   93.815947] hardirqs last disabled at (547821): [<ffffffff814e9987>] _raw_spin_lock_irqsave+0x22/0x8e
[   93.815947] softirqs last  enabled at (547790): [<ffffffff810623ed>] _local_bh_enable+0x13/0x15
[   93.815947] softirqs last disabled at (547791): [<ffffffff814f327c>] call_softirq+0x1c/0x30
[   93.815947]
[   93.815947] other info that might help us debug this:
[   93.815947]  Possible unsafe locking scenario:
[   93.815947]
[   93.815947]        CPU0
[   93.815947]        ----
[   93.815947]   lock(&(&rtlpriv->locks.lps_lock)->rlock);
[   93.815947]   <Interrupt>
[   93.815947]     lock(&(&rtlpriv->locks.lps_lock)->rlock);
[   93.815947]
[   93.815947]  *** DEADLOCK ***
[   93.815947]
[   93.815947] no locks held by swapper/0.
[   93.815947]
[   93.815947] stack backtrace:
[   93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1
[   93.815947] Call Trace:
[   93.815947]  <IRQ>  [<ffffffff814dfd00>] print_usage_bug+0x1e7/0x1f8
[   93.815947]  [<ffffffff8101a849>] ? save_stack_trace+0x2c/0x49
[   93.815947]  [<ffffffff8108d55c>] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0
[   93.815947]  [<ffffffff8108dc8a>] mark_lock+0x106/0x220
[   93.815947]  [<ffffffff8108e099>] __lock_acquire+0x2f5/0xd0c
[   93.815947]  [<ffffffff810152af>] ? native_sched_clock+0x34/0x36
[   93.830125]  [<ffffffff810152ba>] ? sched_clock+0x9/0xd
[   93.830125]  [<ffffffff81080181>] ? sched_clock_local+0x12/0x75
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff81422467>] ? skb_dequeue+0x62/0x6d
[   93.830125]  [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffffa025f677>] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi]
[   93.830125]  [<ffffffff8106281f>] tasklet_action+0x8d/0xee
[   93.830125]  [<ffffffff810629ce>] __do_softirq+0x112/0x25a
[   93.830125]  [<ffffffff814f327c>] call_softirq+0x1c/0x30
[   93.830125]  [<ffffffff81010bf6>] do_softirq+0x4b/0xa1
[   93.830125]  [<ffffffff81062d7d>] irq_exit+0x5d/0xcf
[   93.830125]  [<ffffffff814f3b7e>] do_IRQ+0x8e/0xa5
[   93.830125]  [<ffffffff814ea533>] common_interrupt+0x73/0x73
[   93.830125]  <EOI>  [<ffffffff8108b825>] ? trace_hardirqs_off+0xd/0xf
[   93.830125]  [<ffffffff812bb6d5>] ? intel_idle+0xe5/0x10c
[   93.830125]  [<ffffffff812bb6d1>] ? intel_idle+0xe1/0x10c
[   93.830125]  [<ffffffff813f8d5e>] cpuidle_idle_call+0x11c/0x1fe
[   93.830125]  [<ffffffff8100e2ef>] cpu_idle+0xab/0x101
[   93.830125]  [<ffffffff814c6373>] rest_init+0xd7/0xde
[   93.830125]  [<ffffffff814c629c>] ? csum_partial_copy_generic+0x16c/0x16c
[   93.830125]  [<ffffffff81d4bbb0>] start_kernel+0x3dd/0x3ea
[   93.830125]  [<ffffffff81d4b2c4>] x86_64_start_reservations+0xaf/0xb3
[   93.830125]  [<ffffffff81d4b140>] ? early_idt_handlers+0x140/0x140
[   93.830125]  [<ffffffff81d4b3ca>] x86_64_start_kernel+0x102/0x111

Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=755154

Reported-by: vjain02@students.poly.edu
Reported-and-tested-by: NOliver Paukstadt <pstadt@sourcentral.org>
Cc: stable@vger.kernel.org
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      e55b32c1
  11. 28 11月, 2011 4 次提交
  13. 27 11月, 2011 5 次提交
  15. 25 11月, 2011 1 次提交
    • L
      hwmon: Remove redundant spi driver bus initialization · b52fabca
      由 Lars-Peter Clausen 提交于 
      In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_register_driver(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
      b52fabca
  17. 24 11月, 2011 9 次提交