The is25lp256 supports 4-byte opcodes and quad output.
Suggested-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NLiu Xiang <liu.xiang6@zte.com.cn>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add SPDX tags to replace the license boiler-plate and fix the
MODULE_LICENSE() definition in spi-nor.c to match the license text
(GPL v2).

Interestingly, spi-nor.h and spi-nor.c do not use the same license
(GPL v2+ for spi-nor.h, GPL v2 for spi-nor.c).
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

No need to use an integer when the value is either true or false.
Make it a boolean.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Some functions called from spi_nor_scan() need a flash_info object.
Let's assign nor->info early on to avoid passing info as an extra
argument to each of these sub-functions.

We also stop passing a flash_info object to set_4byte() and use
nor->info directly.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Reorganize the code to kill forward declarations of spi_nor_match_id()
macronix_quad_enable() and spi_nor_hwcaps_read2cmd().
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

gcc should be smart enough to decide when inlining a function makes
sense. Drop all inline specifiers.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

MX25L25635F and MX25L25635E share the same JEDEC-ID, but the F variant
supports 4-byte opcodes while the E variant doesn't. We need a way to
differentiate those 2 chips and set the SNOR_F_4B_OPCODES flag only for
the F variant.

Luckily, 4-byte opcode support is not the only difference: Fast Read
4-4-4 is only supported by the F variant, and this feature is
advertised in the BFPT table. Use this to decide when to set the
SNOR_F_4B_OPCODES flag.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Experience has proven that SFDP tables are sometimes wrong, and parsing
of these broken tables can lead to erroneous flash config.

This leaves us 2 options:

1/ set the SPI_NOR_SKIP_SFDP flag and completely ignore SFDP parsing
2/ fix things at runtime

While #1 should always work, it might imply extra work if most of the
SFDP is correct. #2 has the benefit of keeping the generic SFDP parsing
logic almost untouched while allowing SPI NOR manufacturer drivers to
fix the broken bits.

Add a spi_nor_fixups struct where we'll put all our fixup hooks, each
of them being called at a different point in the scan process.

We start a hook called just after the BFPT parsing to allow fixing up
info extracted from the BFPT section. More hooks will be added if other
sections need to be fixed.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Some flash_info entries have the SPI_NOR_4B_OPCODES flag set to let the
core know that the flash supports 4B opcode. While this solution works
fine for id-based caps detection, it doesn't work that well when relying
on SFDP-based caps detection. Let's add an SNOR_F_4B_OPCODES flag so
that the SFDP parsing code can set it when appropriate.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

The "params->size" is defined as "u64".
And "info->sector_size" and "info->n_sectors" are defined as
unsigned int and u16.
Thus, u64 data might have strange data(loss data) if the result
overflows an unsigned int.
This patch casts "info->sector_size" to an u64.
Signed-off-by: Nhuijin.park <huijin.park@samsung.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

The datasheet is publically available at
http://www.issi.com/WW/pdf/IS25LP032-064-128.pdf. The parameters fit to
what is already available for IS25LP128/256.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add entry for mt35xu512aba Micron NOR flash.
This flash is having uniform sector erase size of 128KB, have
support of FSR(flag status register), flash size is 64MB and
supports 4-byte commands.
Signed-off-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Some MICRON related macros in spi-nor domain were ST.
Rename entries related to STMicroelectronics under macro SNOR_MFR_ST.

Added entry of MFR Id for Micron flashes, 0x002C.
Signed-off-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

gcc 7 with -Wimplicit-fallthrough raises:

drivers/mtd/spi-nor/spi-nor.c: In function ‘set_4byte’:
drivers/mtd/spi-nor/spi-nor.c:289:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   need_wren = true;
   ~~~~~~~~~~^~~~~~
drivers/mtd/spi-nor/spi-nor.c:290:2: note: here
  case SNOR_MFR_MACRONIX:
  ^~~~

Quiet the warning by marking the expected switch fall through.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

This chip supports dual and quad read and uniform 4K-byte erase.
Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Datasheet:
http://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf

Testing done on Mikrotik Routerboard  wAP R board.
It does not support Dual or Quad modes.
Signed-off-by: NRobert Marko <robimarko@gmail.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

The entire smpt array is initialized with data read from sfdp,
there is no need to init it with zeroes before.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

BFPT advertises all the erase types supported by all the possible
map configurations. Mask out the erase types that are not supported
by the current map configuration.

Backward compatibility test done on sst26vf064b.

Fixes: b038e8e3 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Reported-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

There are uniform, non-uniform and flexible erase flash configurations.

The non-uniform erase types, are the erase types that can _not_ erase
the entire flash by their own.

As the code was, in case flashes had flexible erase capabilities
(support both uniform and non-uniform erase types in the same flash
configuration) and supported multiple uniform erase type sizes, the
code did not sort the uniform erase types, and could select a wrong
erase type size.

Sort the uniform erase mask in case of flexible erase flash
configurations, in order to select the best uniform erase type size.

Uniform, non-uniform, and flexible configurations with just a valid
uniform erase type, are not affected by this change.

Uniform erase tested on mx25l3273fm2i-08g and sst26vf064B-104i/sn.
Non uniform erase tested on sst26vf064B-104i/sn.

Fixes: 5390a8df ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

spi_nor_read_raw() calls nor->read() which might be implemented
by the m25p80 driver. m25p80 uses the spi-mem layer which requires
DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw().

Fixes: b038e8e3 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Don't overwrite the errno from spi_nor_read_raw().
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Iterate over smpt array using its starting address and length
instead of the blind iterations that used data found in the array.

This prevents possible memory accesses outside of the smpt array
boundaries in case software, or manufacturers, misrepresent smpt
array fields.

Fixes: b038e8e3 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Suggested-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

JESD216C states that just the Basic Flash Parameter Table is mandatory.
Already defined (or future) additional parameter headers and tables are
optional.

Don't drop already collected sfdp data in case an optional table
parser fails. In case of failing, each optional parser is responsible
to roll back to the previously known spi_nor data.

Fixes: b038e8e3 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Reported-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com>
Suggested-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Commit 5390a8df ("mtd: spi-nor: add support to non-uniform SFDP SPI
NOR flash memories") removed the 'nor->addr_width = 0;' statement when
spi_nor_parse_sfdp() returns an error, thus leaving ->addr_width in an
undefined state which can cause trouble when spi_nor_scan() checks its
value.
Reported-by: NCyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Fixes: 5390a8df ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Some SPI controllers can't write nor->page_size bytes in a single
step because their TX FIFO is too small.

Allow nor->write() to return a size that is smaller than the requested
write size to gracefully handle this case.
Signed-off-by: NYogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add support for the SFDP (JESD216B) Sector Map Parameter Table. This
table is optional, but when available, we parse it to identify the
location and size of sectors within the main data array of the
flash memory device and to identify which Erase Types are supported by
each sector.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Based on Cyrille Pitchen's patch https://lkml.org/lkml/2017/3/22/935.

This patch is a transitional patch in introducing  the support of
SFDP SPI memories with non-uniform erase sizes like Spansion s25fs512s.
Non-uniform erase maps will be used later when initialized based on the
SFDP data.

Introduce the memory erase map which splits the memory array into one
or many erase regions. Each erase region supports up to 4 erase types,
as defined by the JEDEC JESD216B (SFDP) specification.

To be backward compatible, the erase map of uniform SPI NOR flash memories
is initialized so it contains only one erase region and this erase region
supports only one erase command. Hence a single size is used to erase any
sector/block of the memory.

Besides, since the algorithm used to erase sectors on non-uniform SPI NOR
flash memories is quite expensive, when possible, the erase map is tuned
to come back to the uniform case.

The 'erase with the best command, move forward and repeat' approach was
suggested by Cristian Birsan in a brainstorm session, so:
Suggested-by: NCristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Commit 59b356ff ("mtd: m25p80: restore the status of SPI flash when
exiting") is the latest from a long history of attempts to add reboot
handling to handle stateful addressing modes on SPI flash. Some prior
mostly-related discussions:

http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html
[PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands

http://lists.infradead.org/pipermail/barebox/2014-September/020682.html
[RFC] MTD m25p80 3-byte addressing and boot problem

http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html
[PATCH 2/2] m25p80: if supported put chip to deep power down if not used

Previously, attempts to add reboot-time software reset handling were
rejected, but the latest attempt was not.

Quick summary of the problem:
Some systems (e.g., boot ROM or bootloader) assume that they can read
initial boot code from their SPI flash using 3-byte addressing. If the
flash is left in 4-byte mode after reset, these systems won't boot. The
above patch provided a shutdown/remove hook to attempt to reset the
addressing mode before we reboot. Notably, this patch misses out on
huge classes of unexpected reboots (e.g., crashes, watchdog resets).

Unfortunately, it is essentially impossible to solve this problem 100%:
if your system doesn't know how to reset the SPI flash to power-on
defaults at initialization time, no amount of software can really rescue
you -- there will always be a chance of some unexpected reset that
leaves your flash in an addressing mode that your boot sequence didn't
expect.

While it is not directly harmful to perform hacks like the
aforementioned commit on all 4-byte addressing flash, a
properly-designed system should not need the hack -- and in fact,
providing this hack may mask the fact that a given system is indeed
broken. So this patch attempts to apply this unsound hack more narrowly,
providing a strong suggestion to developers and system designers that
this is truly a hack. With luck, system designers can catch their errors
early on in their development cycle, rather than applying this hack long
term. But apparently enough systems are out in the wild that we still
have to provide this hack.

Document a new device tree property to denote systems that do not have a
proper hardware (or software) reset mechanism, and apply the hack (with
a loud warning) only in this case.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add support for Eon en25qh32 spi nor flash.
Signed-off-by: NYuheiOKAWA <tochiro.srchack@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Added support for is25wp032, is25wp064 and is25wp128.
Signed-off-by: NKimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Datasheet:
https://www.winbond.com/resource-files/w25q32jv%20dtr%20revf%2002242017.pdf

Minimal testing done with fw_printenv/fw_setenv, test board did not
support dual or quad access.
Signed-off-by: NStephen Douthit <stephend@silicom-usa.com>
Tested-by: NStephen Douthit <stephend@silicom-usa.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Winbond spi-nor flash 32MB and larger have an 'Extended Address
Register' as one option for addressing beyond 16MB (Macronix
has the same concept, Spansion has EXTADD bits in the Bank Address
Register).

According to section
   8.2.7 Write Extended Address Register (C5h)

of the Winbond W25Q256FV data sheet (256M-BIT SPI flash)

   The Extended Address Register is only effective when the device is
   in the 3-Byte Address Mode.  When the device operates in the 4-Byte
   Address Mode (ADS=1), any command with address input of A31-A24
   will replace the Extended Address Register values. It is
   recommended to check and update the Extended Address Register if
   necessary when the device is switched from 4-Byte to 3-Byte Address
   Mode.

So the documentation suggests clearing the EAR after switching to
3-byte mode.  Experimentation shows that the EAR is *always* one after
the switch to 3-byte mode, so clearing the EAR is mandatory at
shutdown for a subsequent 3-byte-addressed reboot to work.

Note that some SOCs (e.g. MT7621) do not assert a reset line at normal
reboot, so we cannot rely on hardware reset.  The MT7621 does assert a
reset line at watchdog-reset.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NNeilBrown <neil@brown.name>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

These devices are produced by Wuhan Xinxin Semiconductor Manufacturing
Corp. (XMC) and found on some routers from Chinese manufactures.

The data sheets can be found here:
http://www.xmcwh.com/Uploads/2018-03-01/5a9799e4cb355.pdf
http://www.xmcwh.com/Uploads/2018-02-05/5a77e6dbe968b.pdfSigned-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add support for ISSI is25lp256 spi nor flash.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Add support for a new Micron 2Gb Flash memory part.
Datasheet is available: mt25q_qlkt_l_02g_cbb_0.pdf

Testing was done on a Stratix10 SoCFPGA Development Kit.
Reported-by: NSujith Chidurala <sujith.chakra.chidurala@intel.com>
Tested-by: NPaul Kim <paul.kim@intel.com>
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>

MTD users are no longer checking erase_info->state to determine if the
erase operation failed or succeeded. Moreover, mtd_erase_callback() is
now a NOP.

We can safely get rid of all mtd_erase_callback() calls and all
erase_info->state assignments. While at it, get rid of the
erase_info->state field, all MTD_ERASE_XXX definitions and the
mtd_erase_callback() function.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Acked-by: NBert Kenward <bkenward@solarflare.com>
---
Changes in v2:
- Address a few coding style issues (reported by Miquel)
- Remove comments that are no longer valid (reported by Miquel)

Add support for a new ISSI 1MB SPI NOR chip that was tested in our lab.
Datasheet is available at: http://www.issi.com/WW/pdf/25LP-WP080D.pdf

Testing was done only without the SPI_NOR_{DUAL,QUAD}_READ flags that
were added later, according to the datasheet.
Tested-by: NPascal Fabreges <pascal.fabreges@nokia.com>
Reviewed-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NRomain Porte <romain.porte@nokia.com>
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@wedev4u.fr>

They are exactly the same as the s25fl064l but bigger.
Signed-off-by: NRafael Gago Castano <rgc@hms.se>
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@wedev4u.fr>

Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@wedev4u.fr>

Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@wedev4u.fr>