Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 9月, 2022 1 次提交
  3. 19 7月, 2022 1 次提交
  5. 17 6月, 2022 1 次提交
  7. 02 5月, 2022 1 次提交
  9. 18 3月, 2022 1 次提交
  11. 27 2月, 2022 5 次提交
    • V
      net: dsa: sja1105: enforce FDB isolation · 219827ef
      由 Vladimir Oltean 提交于 
      For sja1105, to enforce FDB isolation simply means to turn on
Independent VLAN Learning unconditionally, and to remap VLAN-unaware FDB
and MDB entries towards the private VLAN allocated by tag_8021q for each
bridge.

Standalone ports each have their own standalone tag_8021q VLAN. No
learning happens in that VLAN due to:
- learning being disabled on standalone user ports
- learning being disabled on the CPU port (we use
  assisted_learning_on_cpu_port which only installs bridge FDBs)

VLAN-aware ports learn FDB entries with the bridge VLANs.

VLAN-unaware bridge ports learn with the tag_8021q VLAN for bridging.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      219827ef
    • V
      net: dsa: pass extack to .port_bridge_join driver methods · 06b9cce4
      由 Vladimir Oltean 提交于 
      As FDB isolation cannot be enforced between VLAN-aware bridges in lack
of hardware assistance like extra FID bits, it seems plausible that many
DSA switches cannot do it. Therefore, they need to reject configurations
with multiple VLAN-aware bridges from the two code paths that can
transition towards that state:

- joining a VLAN-aware bridge
- toggling VLAN awareness on an existing bridge

The .port_vlan_filtering method already propagates the netlink extack to
the driver, let's propagate it from .port_bridge_join too, to make sure
that the driver can use the same function for both.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      06b9cce4
    • V
      net: dsa: request drivers to perform FDB isolation · c2693363
      由 Vladimir Oltean 提交于 
      For DSA, to encourage drivers to perform FDB isolation simply means to
track which bridge does each FDB and MDB entry belong to. It then
becomes the driver responsibility to use something that makes the FDB
entry from one bridge not match the FDB lookup of ports from other
bridges.

The top-level functions where the bridge is determined are:
- dsa_port_fdb_{add,del}
- dsa_port_host_fdb_{add,del}
- dsa_port_mdb_{add,del}
- dsa_port_host_mdb_{add,del}

aka the pre-crosschip-notifier functions.

Changing the API to pass a reference to a bridge is not superfluous, and
looking at the passed bridge argument is not the same as having the
driver look at dsa_to_port(ds, port)->bridge from the ->port_fdb_add()
method.

DSA installs FDB and MDB entries on shared (CPU and DSA) ports as well,
and those do not have any dp->bridge information to retrieve, because
they are not in any bridge - they are merely the pipes that serve the
user ports that are in one or multiple bridges.

The struct dsa_bridge associated with each FDB/MDB entry is encapsulated
in a larger "struct dsa_db" database. Although only databases associated
to bridges are notified for now, this API will be the starting point for
implementing IFF_UNICAST_FLT in DSA. There, the idea is to install FDB
entries on the CPU port which belong to the corresponding user port's
port database. These are supposed to match only when the port is
standalone.

It is better to introduce the API in its expected final form than to
introduce it for bridges first, then to have to change drivers which may
have made one or more assumptions.

Drivers can use the provided bridge.num, but they can also use a
different numbering scheme that is more convenient.

DSA must perform refcounting on the CPU and DSA ports by also taking
into account the bridge number. So if two bridges request the same local
address, DSA must notify the driver twice, once for each bridge.

In fact, if the driver supports FDB isolation, DSA must perform
refcounting per bridge, but if the driver doesn't, DSA must refcount
host addresses across all bridges, otherwise it would be telling the
driver to delete an FDB entry for a bridge and the driver would delete
it for all bridges. So introduce a bool fdb_isolation in drivers which
would make all bridge databases passed to the cross-chip notifier have
the same number (0). This makes dsa_mac_addr_find() -> dsa_db_equal()
say that all bridge databases are the same database - which is
essentially the legacy behavior.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c2693363
    • V
      net: dsa: tag_8021q: merge RX and TX VLANs · 04b67e18
      由 Vladimir Oltean 提交于 
      In the old Shared VLAN Learning mode of operation that tag_8021q
previously used for forwarding, we needed to have distinct concepts for
an RX and a TX VLAN.

An RX VLAN could be installed on all ports that were members of a given
bridge, so that autonomous forwarding could still work, while a TX VLAN
was dedicated for precise packet steering, so it just contained the CPU
port and one egress port.

Now that tag_8021q uses Independent VLAN Learning and imprecise RX/TX
all over, those lines have been blurred and we no longer have the need
to do precise TX towards a port that is in a bridge. As for standalone
ports, it is fine to use the same VLAN ID for both RX and TX.

This patch changes the tag_8021q format by shifting the VLAN range it
reserves, and halving it. Previously, our DIR bits were encoding the
VLAN direction (RX/TX) and were set to either 1 or 2. This meant that
tag_8021q reserved 2K VLANs, or 50% of the available range.

Change the DIR bits to a hardcoded value of 3 now, which makes tag_8021q
reserve only 1K VLANs, and a different range now (the last 1K). This is
done so that we leave the old format in place in case we need to return
to it.

In terms of code, the vid_is_dsa_8021q_rxvlan and vid_is_dsa_8021q_txvlan
functions go away. Any vid_is_dsa_8021q is both a TX and an RX VLAN, and
they are no longer distinct. For example, felix which did different
things for different VLAN types, now needs to handle the RX and the TX
logic for the same VLAN.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      04b67e18
    • V
      net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging · 91495f21
      由 Vladimir Oltean 提交于 
      For VLAN-unaware bridging, tag_8021q uses something perhaps a bit too
tied with the sja1105 switch: each port uses the same pvid which is also
used for standalone operation (a unique one from which the source port
and device ID can be retrieved when packets from that port are forwarded
to the CPU). Since each port has a unique pvid when performing
autonomous forwarding, the switch must be configured for Shared VLAN
Learning (SVL) such that the VLAN ID itself is ignored when performing
FDB lookups. Without SVL, packets would always be flooded, since FDB
lookup in the source port's VLAN would never find any entry.

First of all, to make tag_8021q more palatable to switches which might
not support Shared VLAN Learning, let's just use a common VLAN for all
ports that are under the same bridge.

Secondly, using Shared VLAN Learning means that FDB isolation can never
be enforced. But if all ports under the same VLAN-unaware bridge share
the same VLAN ID, it can.

The disadvantage is that the CPU port can no longer perform precise
source port identification for these packets. But at least we have a
mechanism which has proven to be adequate for that situation: imprecise
RX (dsa_find_designated_bridge_port_by_vid), which is what we use for
termination on VLAN-aware bridges.

The VLAN ID that VLAN-unaware bridges will use with tag_8021q is the
same one as we were previously using for imprecise TX (bridge TX
forwarding offload). It is already allocated, it is just a matter of
using it.

Note that because now all ports under the same bridge share the same
VLAN, the complexity of performing a tag_8021q bridge join decreases
dramatically. We no longer have to install the RX VLAN of a newly
joining port into the port membership of the existing bridge ports.
The newly joining port just becomes a member of the VLAN corresponding
to that bridge, and the other ports are already members of it from when
they joined the bridge themselves. So forwarding works properly.

This means that we can unhook dsa_tag_8021q_bridge_{join,leave} from the
cross-chip notifier level dsa_switch_bridge_{join,leave}. We can put
these calls directly into the sja1105 driver.

With this new mode of operation, a port controlled by tag_8021q can have
two pvids whereas before it could only have one. The pvid for standalone
operation is different from the pvid used for VLAN-unaware bridging.
This is done, again, so that FDB isolation can be enforced.
Let tag_8021q manage this by deleting the standalone pvid when a port
joins a bridge, and restoring it when it leaves it.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      91495f21
  13. 25 2月, 2022 6 次提交
  15. 09 2月, 2022 1 次提交
  17. 14 12月, 2021 1 次提交
  19. 12 12月, 2021 6 次提交
    • V
      Revert "net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driver" · fcbf979a
      由 Vladimir Oltean 提交于 
      This reverts commit 6d709cad.

The above change was done to avoid calling symbols exported by the
switch driver from the tagging protocol driver.

With the tagger-owned storage model, we have a new option on our hands,
and that is for the switch driver to provide a data consumer handler in
the form of a function pointer inside the ->connect_tag_protocol()
method. Having a function pointer avoids the problems of the exported
symbols approach.

By creating a handler for metadata frames holding TX timestamps on
SJA1110, we are able to eliminate an skb queue from the tagger data, and
replace it with a simple, and stateless, function pointer. This skb
queue is now handled exclusively by sja1105_ptp.c, which makes the code
easier to follow, as it used to be before the reverted patch.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fcbf979a
    • V
      net: dsa: tag_sja1105: convert to tagger-owned data · c79e8486
      由 Vladimir Oltean 提交于 
      Currently, struct sja1105_tagger_data is a part of struct
sja1105_private, and is used by the sja1105 driver to populate dp->priv.

With the movement towards tagger-owned storage, the sja1105 driver
should not be the owner of this memory.

This change implements the connection between the sja1105 switch driver
and its tagging protocol, which means that sja1105_tagger_data no longer
stays in dp->priv but in ds->tagger_data, and that the sja1105 driver
now only populates the sja1105_port_deferred_xmit callback pointer.
The kthread worker is now the responsibility of the tagger.

The sja1105 driver also alters the tagger's state some more, especially
with regard to the PTP RX timestamping state. This will be fixed up a
bit in further changes.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c79e8486
    • V
      net: dsa: sja1105: move ts_id from sja1105_tagger_data · 22ee9f8e
      由 Vladimir Oltean 提交于 
      The TX timestamp ID is incremented by the SJA1110 PTP timestamping
callback (->port_tx_timestamp) for every packet, when cloning it.
It isn't used by the tagger at all, even though it sits inside the
struct sja1105_tagger_data.

Also, serialization to this structure is currently done through
tagger_data->meta_lock, which is a cheap hack because the meta_lock
isn't used for anything else on SJA1110 (sja1105_rcv_meta_state_machine
isn't called).

This change moves ts_id from sja1105_tagger_data to sja1105_private and
introduces a dedicated spinlock for it, also in sja1105_private.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22ee9f8e
    • V
      net: dsa: sja1105: make dp->priv point directly to sja1105_tagger_data · bfcf1425
      由 Vladimir Oltean 提交于 
      The design of the sja1105 tagger dp->priv is that each port has a
separate struct sja1105_port, and the sp->data pointer points to a
common struct sja1105_tagger_data.

We have removed all per-port members accessible by the tagger, and now
only struct sja1105_tagger_data remains. Make dp->priv point directly to
this.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bfcf1425
    • V
      net: dsa: sja1105: bring deferred xmit implementation in line with ocelot-8021q · d38049bb
      由 Vladimir Oltean 提交于 
      When the ocelot-8021q driver was converted to deferred xmit as part of
commit 8d5f7954 ("net: dsa: felix: break at first CPU port during
init and teardown"), the deferred implementation was deliberately made
subtly different from what sja1105 has.

The implementation differences lied on the following observations:

- There might be a race between these two lines in tag_sja1105.c:

       skb_queue_tail(&sp->xmit_queue, skb_get(skb));
       kthread_queue_work(sp->xmit_worker, &sp->xmit_work);

  and the skb dequeue logic in sja1105_port_deferred_xmit(). For
  example, the xmit_work might be already queued, however the work item
  has just finished walking through the skb queue. Because we don't
  check the return code from kthread_queue_work, we don't do anything if
  the work item is already queued.

  However, nobody will take that skb and send it, at least until the
  next timestampable skb is sent. This creates additional (and
  avoidable) TX timestamping latency.

  To close that race, what the ocelot-8021q driver does is it doesn't
  keep a single work item per port, and a skb timestamping queue, but
  rather dynamically allocates a work item per packet.

- It is also unnecessary to have more than one kthread that does the
  work. So delete the per-port kthread allocations and replace them with
  a single kthread which is global to the switch.

This change brings the two implementations in line by applying those
observations to the sja1105 driver as well.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d38049bb
    • V
      net: dsa: sja1105: let deferred packets time out when sent to ports going down · a3d74295
      由 Vladimir Oltean 提交于 
      This code is not necessary and complicates the conversion of this driver
to tagger-owned memory. If there is a PTP packet that is sent
concurrently with the port getting disabled, the deferred xmit mechanism
is robust enough to time out when it sees that it hasn't been delivered,
and recovers.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a3d74295
  21. 09 12月, 2021 5 次提交
    • V
      net: dsa: eliminate dsa_switch_ops :: port_bridge_tx_fwd_{,un}offload · 857fdd74
      由 Vladimir Oltean 提交于 
      We don't really need new switch API for these, and with new switches
which intend to add support for this feature, it will become cumbersome
to maintain.

The change consists in restructuring the two drivers that implement this
offload (sja1105 and mv88e6xxx) such that the offload is enabled and
disabled from the ->port_bridge_{join,leave} methods instead of the old
->port_bridge_tx_fwd_{,un}offload.

The only non-trivial change is that mv88e6xxx_map_virtual_bridge_to_pvt()
has been moved to avoid a forward declaration, and the
mv88e6xxx_reg_lock() calls from inside it have been removed, since
locking is now done from mv88e6xxx_port_bridge_{join,leave}.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAlvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      857fdd74
    • V
      net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join · b079922b
      由 Vladimir Oltean 提交于 
      This is a preparation patch for the removal of the DSA switch methods
->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload().
The plan is for the switch to report whether it offloads TX forwarding
directly as a response to the ->port_bridge_join() method.

This change deals with the noisy portion of converting all existing
function prototypes to take this new boolean pointer argument.
The bool is placed in the cross-chip notifier structure for bridge join,
and a reference to it is provided to drivers. In the next change, DSA
will then actually look at this value instead of calling
->port_bridge_tx_fwd_offload().
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAlvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      b079922b
    • V
      net: dsa: keep the bridge_dev and bridge_num as part of the same structure · d3eed0e5
      由 Vladimir Oltean 提交于 
      The main desire behind this is to provide coherent bridge information to
the fast path without locking.

For example, right now we set dp->bridge_dev and dp->bridge_num from
separate code paths, it is theoretically possible for a packet
transmission to read these two port properties consecutively and find a
bridge number which does not correspond with the bridge device.

Another desire is to start passing more complex bridge information to
dsa_switch_ops functions. For example, with FDB isolation, it is
expected that drivers will need to be passed the bridge which requested
an FDB/MDB entry to be offloaded, and along with that bridge_dev, the
associated bridge_num should be passed too, in case the driver might
want to implement an isolation scheme based on that number.

We already pass the {bridge_dev, bridge_num} pair to the TX forwarding
offload switch API, however we'd like to remove that and squash it into
the basic bridge join/leave API. So that means we need to pass this
pair to the bridge join/leave API.

During dsa_port_bridge_leave, first we unset dp->bridge_dev, then we
call the driver's .port_bridge_leave with what used to be our
dp->bridge_dev, but provided as an argument.

When bridge_dev and bridge_num get folded into a single structure, we
need to preserve this behavior in dsa_port_bridge_leave: we need a copy
of what used to be in dp->bridge.

Switch drivers check bridge membership by comparing dp->bridge_dev with
the provided bridge_dev, but now, if we provide the struct dsa_bridge as
a pointer, they cannot keep comparing dp->bridge to the provided
pointer, since this only points to an on-stack copy. To make this
obvious and prevent driver writers from forgetting and doing stupid
things, in this new API, the struct dsa_bridge is provided as a full
structure (not very large, contains an int and a pointer) instead of a
pointer. An explicit comparison function needs to be used to determine
bridge membership: dsa_port_offloads_bridge().
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAlvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      d3eed0e5
    • V
      net: dsa: hide dp->bridge_dev and dp->bridge_num in drivers behind helpers · 41fb0cf1
      由 Vladimir Oltean 提交于 
      The location of the bridge device pointer and number is going to change.
It is not going to be kept individually per port, but in a common
structure allocated dynamically and which will have lockdep validation.

Use the helpers to access these elements so that we have a migration
path to the new organization.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      41fb0cf1
    • V
      net: dsa: assign a bridge number even without TX forwarding offload · 947c8746
      由 Vladimir Oltean 提交于 
      The service where DSA assigns a unique bridge number for each forwarding
domain is useful even for drivers which do not implement the TX
forwarding offload feature.

For example, drivers might use the dp->bridge_num for FDB isolation.

So rename ds->num_fwd_offloading_bridges to ds->max_num_bridges, and
calculate a unique bridge_num for all drivers that set this value.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAlvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      947c8746
  23. 25 10月, 2021 2 次提交
    • V
      net: dsa: sja1105: serialize access to the dynamic config interface · eb016afd
      由 Vladimir Oltean 提交于 
      The sja1105 hardware seems as concurrent as can be, but when we create a
background script that adds/removes a rain of FDB entries without the
rtnl_mutex taken, then in parallel we do another operation like run
'bridge fdb show', we can notice these errors popping up:

sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:40 vid 0: -ENOENT
sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:40 vid 0 to fdb: -2
sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:46 vid 0: -ENOENT
sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:46 vid 0 to fdb: -2

Luckily what is going on does not require a major rework in the driver.
The sja1105_dynamic_config_read() function sends multiple SPI buffers to
the peripheral until the operation completes. We should not do anything
until the hardware clears the VALID bit.

But since there is no locking (i.e. right now we are implicitly
serialized by the rtnl_mutex, but if we remove that), it might be
possible that the process which performs the dynamic config read is
preempted and another one performs a dynamic config write.

What will happen in that case is that sja1105_dynamic_config_read(),
when it resumes, expects to see VALIDENT set for the entry it reads
back. But it won't.

This can be corrected by introducing a mutex for serializing SPI
accesses to the dynamic config interface which should be atomic with
respect to each other.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eb016afd
    • D
      Revert "Merge branch 'dsa-rtnl'" · 2d7e73f0
      由 David S. Miller 提交于 
      This reverts commit 965e6b26, reversing
changes made to 4d98bb0d.
      2d7e73f0
  25. 24 10月, 2021 2 次提交
    • S
      net: convert users of bitmap_foo() to linkmode_foo() · 4973056c
      由 Sean Anderson 提交于 
      This converts instances of
	bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS)
to
	linkmode_foo(args...)

I manually fixed up some lines to prevent them from being excessively
long. Otherwise, this change was generated with the following semantic
patch:

// Generated with
// echo linux/linkmode.h > includes
// git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \
// | sort | uniq | tee new_includes | wc -l && mv new_includes includes
// and repeating until the number stopped going up
@i@
@@

(
 #include <linux/acpi_mdio.h>
|
 #include <linux/brcmphy.h>
|
 #include <linux/dsa/loop.h>
|
 #include <linux/dsa/sja1105.h>
|
 #include <linux/ethtool.h>
|
 #include <linux/ethtool_netlink.h>
|
 #include <linux/fec.h>
|
 #include <linux/fs_enet_pd.h>
|
 #include <linux/fsl/enetc_mdio.h>
|
 #include <linux/fwnode_mdio.h>
|
 #include <linux/linkmode.h>
|
 #include <linux/lsm_audit.h>
|
 #include <linux/mdio-bitbang.h>
|
 #include <linux/mdio.h>
|
 #include <linux/mdio-mux.h>
|
 #include <linux/mii.h>
|
 #include <linux/mii_timestamper.h>
|
 #include <linux/mlx5/accel.h>
|
 #include <linux/mlx5/cq.h>
|
 #include <linux/mlx5/device.h>
|
 #include <linux/mlx5/driver.h>
|
 #include <linux/mlx5/eswitch.h>
|
 #include <linux/mlx5/fs.h>
|
 #include <linux/mlx5/port.h>
|
 #include <linux/mlx5/qp.h>
|
 #include <linux/mlx5/rsc_dump.h>
|
 #include <linux/mlx5/transobj.h>
|
 #include <linux/mlx5/vport.h>
|
 #include <linux/of_mdio.h>
|
 #include <linux/of_net.h>
|
 #include <linux/pcs-lynx.h>
|
 #include <linux/pcs/pcs-xpcs.h>
|
 #include <linux/phy.h>
|
 #include <linux/phy_led_triggers.h>
|
 #include <linux/phylink.h>
|
 #include <linux/platform_data/bcmgenet.h>
|
 #include <linux/platform_data/xilinx-ll-temac.h>
|
 #include <linux/pxa168_eth.h>
|
 #include <linux/qed/qed_eth_if.h>
|
 #include <linux/qed/qed_fcoe_if.h>
|
 #include <linux/qed/qed_if.h>
|
 #include <linux/qed/qed_iov_if.h>
|
 #include <linux/qed/qed_iscsi_if.h>
|
 #include <linux/qed/qed_ll2_if.h>
|
 #include <linux/qed/qed_nvmetcp_if.h>
|
 #include <linux/qed/qed_rdma_if.h>
|
 #include <linux/sfp.h>
|
 #include <linux/sh_eth.h>
|
 #include <linux/smsc911x.h>
|
 #include <linux/soc/nxp/lpc32xx-misc.h>
|
 #include <linux/stmmac.h>
|
 #include <linux/sunrpc/svc_rdma.h>
|
 #include <linux/sxgbe_platform.h>
|
 #include <net/cfg80211.h>
|
 #include <net/dsa.h>
|
 #include <net/mac80211.h>
|
 #include <net/selftests.h>
|
 #include <rdma/ib_addr.h>
|
 #include <rdma/ib_cache.h>
|
 #include <rdma/ib_cm.h>
|
 #include <rdma/ib_hdrs.h>
|
 #include <rdma/ib_mad.h>
|
 #include <rdma/ib_marshall.h>
|
 #include <rdma/ib_pack.h>
|
 #include <rdma/ib_pma.h>
|
 #include <rdma/ib_sa.h>
|
 #include <rdma/ib_smi.h>
|
 #include <rdma/ib_umem.h>
|
 #include <rdma/ib_umem_odp.h>
|
 #include <rdma/ib_verbs.h>
|
 #include <rdma/iw_cm.h>
|
 #include <rdma/mr_pool.h>
|
 #include <rdma/opa_addr.h>
|
 #include <rdma/opa_port_info.h>
|
 #include <rdma/opa_smi.h>
|
 #include <rdma/opa_vnic.h>
|
 #include <rdma/rdma_cm.h>
|
 #include <rdma/rdma_cm_ib.h>
|
 #include <rdma/rdmavt_cq.h>
|
 #include <rdma/rdma_vt.h>
|
 #include <rdma/rdmavt_qp.h>
|
 #include <rdma/rw.h>
|
 #include <rdma/tid_rdma_defs.h>
|
 #include <rdma/uverbs_ioctl.h>
|
 #include <rdma/uverbs_named_ioctl.h>
|
 #include <rdma/uverbs_std_types.h>
|
 #include <rdma/uverbs_types.h>
|
 #include <soc/mscc/ocelot.h>
|
 #include <soc/mscc/ocelot_ptp.h>
|
 #include <soc/mscc/ocelot_vcap.h>
|
 #include <trace/events/ib_mad.h>
|
 #include <trace/events/rdma_core.h>
|
 #include <trace/events/rdma.h>
|
 #include <trace/events/rpcrdma.h>
|
 #include <uapi/linux/ethtool.h>
|
 #include <uapi/linux/ethtool_netlink.h>
|
 #include <uapi/linux/mdio.h>
|
 #include <uapi/linux/mii.h>
)

@depends on i@
expression list args;
@@

(
- bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_zero(args)
|
- bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_copy(args)
|
- bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_and(args)
|
- bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_or(args)
|
- bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_empty(args)
|
- bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_andnot(args)
|
- bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_equal(args)
|
- bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_intersects(args)
|
- bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS)
+ linkmode_subset(args)
)

Add missing linux/mii.h include to mellanox. -DaveM
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4973056c
    • V
      net: dsa: sja1105: serialize access to the dynamic config interface · 1681ae16
      由 Vladimir Oltean 提交于 
      The sja1105 hardware seems as concurrent as can be, but when we create a
background script that adds/removes a rain of FDB entries without the
rtnl_mutex taken, then in parallel we do another operation like run
'bridge fdb show', we can notice these errors popping up:

sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:40 vid 0: -ENOENT
sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:40 vid 0 to fdb: -2
sja1105 spi2.0: port 2 failed to read back entry for 00:01:02:03:00:46 vid 0: -ENOENT
sja1105 spi2.0: port 2 failed to add 00:01:02:03:00:46 vid 0 to fdb: -2

Luckily what is going on does not require a major rework in the driver.
The sja1105_dynamic_config_read() function sends multiple SPI buffers to
the peripheral until the operation completes. We should not do anything
until the hardware clears the VALID bit.

But since there is no locking (i.e. right now we are implicitly
serialized by the rtnl_mutex, but if we remove that), it might be
possible that the process which performs the dynamic config read is
preempted and another one performs a dynamic config write.

What will happen in that case is that sja1105_dynamic_config_read(),
when it resumes, expects to see VALIDENT set for the entry it reads
back. But it won't.

This can be corrected by introducing a mutex for serializing SPI
accesses to the dynamic config interface which should be atomic with
respect to each other.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1681ae16
  27. 23 10月, 2021 1 次提交
  29. 20 10月, 2021 1 次提交
  31. 13 10月, 2021 1 次提交
    • V
      net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driver · 4ac0567e
      由 Vladimir Oltean 提交于 
      It's nice to be able to test a tagging protocol with dsa_loop, but not
at the cost of losing the ability of building the tagging protocol and
switch driver as modules, because as things stand, there is a circular
dependency between the two. Tagging protocol drivers cannot depend on
switch drivers, that is a hard fact.

The reasoning behind the blamed patch was that accessing dp->priv should
first make sure that the structure behind that pointer is what we really
think it is.

Currently the "sja1105" and "sja1110" tagging protocols only operate
with the sja1105 switch driver, just like any other tagging protocol and
switch combination. The only way to mix and match them is by modifying
the code, and this applies to dsa_loop as well (by default that uses
DSA_TAG_PROTO_NONE). So while in principle there is an issue, in
practice there isn't one.

Until we extend dsa_loop to allow user space configuration, treat the
problem as a non-issue and just say that DSA ports found by tag_sja1105
are always sja1105 ports, which is in fact true. But keep the
dsa_port_is_sja1105 function so that it's easy to patch it during
testing, and rely on dead code elimination.

Fixes: 994d2cbb ("net: dsa: tag_sja1105: be dsa_loop-safe")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
      4ac0567e
  33. 23 9月, 2021 4 次提交