When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.

When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.

For now all on disk data structures are assumed to be
stored in the initial user namespace.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Where kuid_t values are compared use uid_eq and where kgid_t values
are compared use gid_eq.  This is unfortunately necessary because
of the type safety that keeps someone from accidentally mixing
kuids and kgids with other types.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Remove the QUOTA_USER and QUOTA_GRUP defines.  Remove
the last vestigal users of QUOTA_USER and QUOTA_GROUP.

Now that struct kqid is used throughout the gfs2 quota
code the need there is to use QUOTA_USER and QUOTA_GROUP
and the defines are just extraneous and confusing.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
  things simpler along the way.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- In quota_refresh_user_store convert the user supplied uid
  into a kqid and pass it to gfs2_quota_refresh.

- In quota_refresh_group_store convert the user supplied gid
  into a kqid and pass it to gfs2_quota_refresh.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Both qd_alloc and qd2offset perform the exact same computation
to get an index from a gfs2_quota_data.   Make life a little
simpler and factor out this index computation.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

When a quota is queried return the uid or the gid in the mapped into
the caller's user namespace.  In addition perform the munged version
of the mapping so that instead of -1 a value that does not map is
reported as the overflowuid or the overflowgid.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE
so the constants may be well typed.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

In set_dqblk it is an error to look at fdq->d_id or fdq->d_flags.
Userspace quota applications do not set these fields when calling
quotactl(Q_XSETQLIM,...), and the kernel does not set those fields
when quota_setquota calls set_dqblk.

gfs2 never looks at fdq->d_id or fdq->d_flags after checking
to see if they match the id and type supplied to set_dqblk.

No other linux filesystem in set_dqblk looks at either fdq->d_id
or fdq->d_flags.

Therefore remove these bogus checks from gfs2 and allow normal
quota setting applications to work.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that ocfs2 has been converted to store uids and gids in
kuid_t and kgid_t and all of the conversions have been added
to the appropriate places it is safe to allow building and
using ocfs2 with user namespace support enabled.

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Convert between uid and gids stored in the on the wire format of dlm
locks aka struct ocfs2_meta_lvb and kuids and kgids stored in
inode->i_uid and inode->i_gid.

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Explicitly deal with the different kinds of acls because they need
different conversions.

Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that the coda kernel to userspace has been modified to convert
between kuids and kgids and uids and gids, and all internal
coda structures have be modified to store uids and gids as
kuids and kgids it is safe to allow code to be built with
user namespace support enabled.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Change c_uid in struct coda_indoe_info from a vuid_t to a kuid_t.
- Initialize c_uid to GLOBAL_ROOT_UID instead of 0.
- Use uid_eq to compare cached kuids.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Remove the slight chance that uids and gids in coda messages will be
interpreted in the wrong user namespace.

- Only allow processes in the initial user namespace to open the coda
  character device to communicate with coda filesystems.
- Explicitly convert the uids in the coda header into the initial user
  namespace.
- In coda_vattr_to_attr make kuids and kgids from the initial user
  namespace uids and gids in struct coda_vattr that just came from
  userspace.
- In coda_iattr_to_vattr convert kuids and kgids into uids and gids
  in the intial user namespace and store them in struct coda_vattr for
  sending to coda userspace programs.

Nothing needs to be changed with mounts as coda does not support
being mounted in anything other than the initial user namespace.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Remove the slight chance that pids in coda messages will be
interpreted in the wrong pid namespace.

- Explicitly send all pids in coda messages in the initial pid
  namespace.
- Only allow mounts from processes in the initial pid namespace.
- Only allow processes in the initial pid namespace to open the coda
  character device to communicate with coda.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Modify struct afs_file_status to store owner as a kuid_t and group as
a kgid_t.

In xdr_decode_AFSFetchStatus as owner is now a kuid_t and group is now
a kgid_t don't use the EXTRACT macro.  Instead perform the work of
the extract macro explicitly.  Read the value with ntohl and
convert it to the appropriate type with make_kuid or make_kgid.
Test if the value is different from what is stored in status and
update changed.   Update the value in status.

In xdr_encode_AFS_StoreStatus call from_kuid or from_kgid as
we are computing the on the wire encoding.

Initialize uids with GLOBAL_ROOT_UID instead of 0.
Initialize gids with GLOBAL_ROOT_GID instead of 0.

Cc: David Howells <dhowells@redhat.com>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

rxrpc sockets only work in the initial network namespace so it isn't
possible to support afs in any other network namespace.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

While looking for kuid_t and kgid_t conversions I found this
structure that has never been used since it was added to the
kernel in 2007.  The obvious for this structure to be used
is in xdr_encode_AFS_StoreStatus and that function uses a
small handful of local variables instead.

So remove the unnecessary structure to prevent confusion.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that the uid_t -> kuid_t, gid_t -> kgid_t conversion
has been completed in 9p allow 9p to be built when user
namespaces are enabled.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Modify v9fs_get_fsgid_for_create to return a kgid and modify all of
the variables that hold the result of v9fs_get_fsgid_for_create to be
of type kgid_t.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Change struct v9fs_session_info and the code that popluates it to use
kuids and kgids.  When parsing the 9p mount options convert the
dfltuid, dflutgid, and the session uid from the current user namespace
into kuids and kgids.  Modify V9FS_DEFUID and V9FS_DEFGUID to be kuid
and kgid values.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Change struct 9p_fid and it's associated functions to
use kuid_t's instead of uid_t.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

9p has thre strucrtures that can encode inode stat information.  Modify
all of those structures to contain kuid_t and kgid_t values.  Modify
he wire encoders and decoders of those structures to use 'u' and 'g' instead of
'd' in the format string where uids and gids are present.

This results in all kuid and kgid conversion to and from on the wire values
being performed by the same code in protocol.c where the client is known
at the time of the conversion.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Modify the p9_client_rpc format specifiers of every function that
directly transmits a uid or a gid from 'd' to 'u' or 'g' as
appropriate.

Modify those same functions to take kuid_t and kgid_t parameters
instead of uid_t and gid_t parameters.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

This allows concentrating all of the conversion to and from kuids and
kgids into the format needed by the 9p protocol into one location.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Now that conversions happen from kuids and kgids when generating ceph
messages and conversion happen to kuids and kgids after receiving
celph messages, and all intermediate data structures store uids and
gids as type kuid_t and kgid_t it is safe to enable ceph with
user namespace support enabled.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Before printing kuid and kgids values convert them into
the initial user namespace.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Hold the uid and gid for a pending ceph mds request using the types
kuid_t and kgid_t.  When a request message is finally created convert
the kuid_t and kgid_t values into uids and gids in the initial user
namespace.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- In fill_inode() transate uids and gids in the initial user namespace
  into kuids and kgids stored in inode->i_uid and inode->i_gid.

- In ceph_setattr() if they have changed convert inode->i_uid and
  inode->i_gid into initial user namespace uids and gids for
  transmission.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

- Make the uid and gid arguments of send_cap_msg() used to compose
  ceph_mds_caps messages of type kuid_t and kgid_t.

- Pass inode->i_uid and inode->i_gid in __send_cap to send_cap_msg()
  through variables of type kuid_t and kgid_t.

- Modify struct ceph_cap_snap to store uids and gids in types kuid_t
  and kgid_t.  This allows capturing inode->i_uid and inode->i_gid in
  ceph_queue_cap_snap() without loss and pssing them to
  __ceph_flush_snaps() where they are removed from struct
  ceph_cap_snap and passed to send_cap_msg().

- In handle_cap_grant translate uid and gids in the initial user
  namespace stored in struct ceph_mds_cap into kuids and kgids
  before setting inode->i_uid and inode->i_gid.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Today ceph opens tcp sockets from a delayed work callback.  Delayed
work happens from kernel threads which are always in the initial
network namespace.   Therefore fail early if someone attempts
to mount a ceph filesystem from something other than the initial
network namespace.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

This patch allow the unprivileged user to mount mqueuefs in
user ns.

If two userns share the same ipcns,the files in mqueue fs
should be seen in both these two userns.

If the userns has its own ipcns,it has its own mqueue fs too.
ipcns has already done this job well.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

There is no backing store to tmpfs and file creation rules are the
same as for any other filesystem so it is semantically safe to allow
unprivileged users to mount it.  ramfs is safe for the same reasons so
allow either flavor of tmpfs to be mounted by a user namespace root
user.

The memory control group successfully limits how much memory tmpfs can
consume on any system that cares about a user namespace root using
tmpfs to exhaust memory the memory control group can be deployed.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>