For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86_64 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a problem with reserving memory during boot up of a kernel
built for non-default location.  Currently boot memory allocator reserves
the memory required by kernel image, boot allocaotor bitmap etc.  It
assumes that kernel is loaded at 1MB (HIGH_MEMORY hard coded to 1024*1024).
 But kernel can be built for non-default locatoin, hence existing
hardcoding will lead to reserving unnecessary memory.  This patch fixes it.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The vmlinux on x86_64 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The vmlinux on i386 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In vmlinux.lds.h the code is carefull to define every section so vmlinux
properly reports the correct physical load address of code, as well as
it's virtual address.

The new SECURITY_INIT definition fails to follow that convention and
and causes incorrect physical address to appear in the vmlinux if
there are any security initcalls.

This patch updates the SECURITY_INIT to follow the convention in the rest of
the file.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com

The following patch simply adds a shutdown method to the x86_64 i8259 code.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com>

This patch disables interrupt generation from the legacy pic on reboot.  Now
that there is a sys_device class it should not be called while drivers are
still using interrupts.

There is a report about this breaking ACPI power off on some systems.
http://bugme.osdl.org/show_bug.cgi?id=4041
However the final comment seems to exonerate this code.  So until
I get more information I believe that was a false positive.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com>

It is ok to reserve resources > 4G on x86_64 struct resource is 64bit now :)
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: "Maciej W. Rozycki" <macro@linux-mips.org>

Fix a kexec problem whcih causes local APIC detection failure.

The problem is detect_init_APIC() is called early, before the command line
have been processed.  Therefore "lapic" (and "nolapic") have not been seen,
yet.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: "Maciej W. Rozycki" <macro@linux-mips.org>

Rename APIC_MODE_EXINT to APIC_MODE_EXTINT - I think it should be named
after what the mode is called in documentation.

From: "Eric W. Biederman" <ebiederm@lnxi.com>

I have reduced this patch to just the name change in the header.  And
integrated the changes into the patches that add those
lines. Otherwise I ran into some ugly dependencies.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a new preemption model: 'Voluntary Kernel Preemption'.  The
3 models can be selected from a new menu:

            (X) No Forced Preemption (Server)
            ( ) Voluntary Kernel Preemption (Desktop)
            ( ) Preemptible Kernel (Low-Latency Desktop)

we still default to the stock (Server) preemption model.

Voluntary preemption works by adding a cond_resched()
(reschedule-if-needed) call to every might_sleep() check.  It is lighter
than CONFIG_PREEMPT - at the cost of not having as tight latencies.  It
represents a different latency/complexity/overhead tradeoff.

It has no runtime impact at all if disabled.  Here are size stats that show
how the various preemption models impact the kernel's size:

    text    data     bss     dec     hex filename
 3618774  547184  179896 4345854  424ffe vmlinux.stock
 3626406  547184  179896 4353486  426dce vmlinux.voluntary   +0.2%
 3748414  548640  179896 4476950  445016 vmlinux.preempt     +3.5%

voluntary-preempt is +0.2% of .text, preempt is +3.5%.

This feature has been tested for many months by lots of people (and it's
also included in the RHEL4 distribution and earlier variants were in Fedora
as well), and it's intended for users and distributions who dont want to
use full-blown CONFIG_PREEMPT for one reason or another.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The only sane way to clean up the current 3 lock_kernel() variants seems to
be to remove the spinlock-based BKL implementations altogether, and to keep
the semaphore-based one only.  If we dont want to do that for whatever
reason then i'm afraid we have to live with the current complexity.  (but
i'm open for other cleanup suggestions as well.)

To explore this possibility we'll (at a minimum) have to know whether the
semaphore-based BKL works fine on plain SMP too.  The patch below enables
this.

The patch may make sense in isolation as well, as it might bring
performance benefits: code that would formerly spin on the BKL spinlock
will now schedule away and give up the CPU.  It might introduce performance
regressions as well, if any performance-critical code uses the BKL heavily
and gets overscheduled due to the semaphore.  I very much hope there is no
such performance-critical codepath left though.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch consolidates the CONFIG_PREEMPT and CONFIG_PREEMPT_BKL
preemption options into kernel/Kconfig.preempt.  This, besides reducing
source-code, also enables more centralized tweaking of preemption related
options.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ia64 changes similar to kernel/sched.c.
Signed-off-by: NDinakar Guniguntala <dino@in.ibm.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Adds the core update_cpu_domains code and updated cpusets documentation
Signed-off-by: NDinakar Guniguntala <dino@in.ibm.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patches add dynamic sched domains functionality that was
extensively discussed on lkml and lse-tech.  I would like to see this added to
-mm

o The main advantage with this feature is that it ensures that the scheduler
  load balacing code only balances against the cpus that are in the sched
  domain as defined by an exclusive cpuset and not all of the cpus in the
  system. This removes any overhead due to load balancing code trying to
  pull tasks outside of the cpu exclusive cpuset only to be prevented by
  the tasks' cpus_allowed mask.
o cpu exclusive cpusets are useful for servers running orthogonal
  workloads such as RT applications requiring low latency and HPC
  applications that are throughput sensitive

o It provides a new API partition_sched_domains in sched.c
  that makes dynamic sched domains possible.
o cpu_exclusive cpusets sets are now associated with a sched domain.
  Which means that the users can dynamically modify the sched domains
  through the cpuset file system interface
o ia64 sched domain code has been updated to support this feature as well
o Currently, this does not support hotplug. (However some of my tests
  indicate hotplug+preempt is currently broken)
o I have tested it extensively on x86.
o This should have very minimal impact on performance as none of
  the fast paths are affected
Signed-off-by: NDinakar Guniguntala <dino@in.ibm.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Presently, a process without the capability CAP_SYS_NICE can not change
its own policy, which is OK.

But it can also not decrease its RT priority (if scheduled with policy
SCHED_RR or SCHED_FIFO), which is what this patch changes.

The rationale is the same as for the nice value: a process should be
able to require less priority for itself. Increasing the priority is
still not allowed.

This is for example useful if you give a multithreaded user process a RT
priority, and the process would like to organize its internal threads
using priorities also. Then you can give the process the highest
priority needed N, and the process starts its threads with lower
priorities: N-1, N-2...

The POSIX norm says that the permissions are implementation specific, so
I think we can do that.

In a sense, it makes the permissions consistent whatever the policy is:
with this patch, process scheduled by SCHED_FIFO, SCHED_RR and
SCHED_OTHER can all decrease their priority.

From: Ingo Molnar <mingo@elte.hu>

cleaned up and merged to -mm.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

micro-optimize task requeueing in schedule() & clean up recalc_task_prio().
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The maximum rebalance interval allowed by the multiprocessor balancing
backoff is often not large enough to handle corner cases where there are
lots of tasks pinned on a CPU.  Suresh reported:

	I see system livelock's if for example I have 7000 processes
	pinned onto one cpu (this is on the fastest 8-way system I
	have access to).

After this patch, the machine is reported to go well above this number.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Consolidate balance-on-exec with balance-on-fork.  This is made easy by the
sched-domains RCU patches.

As well as the general goodness of code reduction, this allows the runqueues
to be unlocked during balance-on-fork.

schedstats is a problem.  Maybe just have balance-on-event instead of
distinguishing fork and exec?
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One of the problems with the multilevel balance-on-fork/exec is that it needs
to jump through hoops to satisfy sched-domain's locking semantics (that is,
you may traverse your own domain when not preemptable, and you may traverse
others' domains when holding their runqueue lock).

balance-on-exec had to potentially migrate between more than one CPU before
finding a final CPU to migrate to, and balance-on-fork needed to potentially
take multiple runqueue locks.

So bite the bullet and make sched-domains go completely RCU.  This actually
simplifies the code quite a bit.

From: Ingo Molnar <mingo@elte.hu>

schedstats RCU fix, and a nice comment on for_each_domain, from Ingo.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The fundamental problem that Suresh has with balance on exec and fork is that
it only tries to balance the top level domain with the flag set.

This was worked around by removing degenerate domains, but is still a problem
if people want to start using more complex sched-domains, especially
multilevel NUMA that ia64 is already using.

This patch makes balance on fork and exec try balancing over not just the top
most domain with the flag set, but all the way down the domain tree.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove degenerate scheduler domains during the sched-domain init.

For example on x86_64, we always have NUMA configured in.  On Intel EM64T
systems, top most sched domain will be of NUMA and with only one sched_group
in it.

With fork/exec balances(recent Nick's fixes in -mm tree), we always endup
taking wrong decisions because of this topmost domain (as it contains only one
group and find_idlest_group always returns NULL).  We will endup loading HT
package completely first, letting active load balance kickin and correct it.

In general, this patch also makes sense with out recent Nick's fixes in -mm.

From: Nick Piggin <nickpiggin@yahoo.com.au>

Modified to account for more than just sched_groups when scanning for
degenerate domains by Nick Piggin.  And allow a runqueue's sd to go NULL
rather than keep a single degenerate domain around (this happens when you run
with maxcpus=1).
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the last 2 places that directly access a runqueue's sched-domain and
assume it cannot be NULL.

That allows the use of NULL for domain, instead of a dummy domain, to signify
no balancing is to happen.  No functional changes.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of requiring architecture code to interact with the scheduler's
locking implementation, provide a couple of defines that can be used by the
architecture to request runqueue unlocked context switches, and ask for
interrupts to be enabled over the context switch.

Also replaces the "switch_lock" used by these architectures with an oncpu
flag (note, not a potentially slow bitflag).  This eliminates one bus
locked memory operation when context switching, and simplifies the
task_running function.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      "Chen, Kenneth W" <kenneth.w.chen@intel.com>

uninline task_timeslice() - reduces code footprint noticeably, and it's
slowpath code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do some basic initial tuning.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add SCHEDSTAT statistics for sched-balance-fork.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reimplement the balance on exec balancing to be sched-domains aware.  Use this
to also do balance on fork balancing.  Make x86_64 do balance on fork over the
NUMA domain.

The problem that the non sched domains aware blancing became apparent on dual
core, multi socket opterons.  What we want is for the new tasks to be sent to
a different socket, but more often than not, we would first load up our
sibling core, or fill two cores of a single remote socket before selecting a
new one.

This gives large improvements to STREAM on such systems.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the very aggressive idle stuff that has recently gone into 2.6 - it is
going against the direction we are trying to go.  Hopefully we can regain
performance through other methods.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do less affine wakeups.  We're trying to reduce dbt2-pgsql idle time
regressions here...  make sure we don't don't move tasks the wrong way in an
imbalance condition.  Also, remove the cache coldness requirement from the
calculation - this seems to induce sharp cutoff points where behaviour will
suddenly change on some workloads if the load creeps slightly over or under
some point.  It is good for periodic balancing because in that case have
otherwise have no other context to determine what task to move.

But also make a minor tweak to "wake balancing" - the imbalance tolerance is
now set at half the domain's imbalance, so we get the opportunity to do wake
balancing before the more random periodic rebalancing gets preformed.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do CPU load averaging over a number of different intervals.  Allow each
interval to be chosen by sending a parameter to source_load and target_load.
0 is instantaneous, idx > 0 returns a decaying average with the most recent
sample weighted at 2^(idx-1).  To a maximum of 3 (could be easily increased).

So generally a higher number will result in more conservative balancing.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the special casing for idle CPU balancing.  Things like this are
hurting for example on SMT, where are single sibling being idle doesn't really
warrant a really aggressive pull over the NUMA domain, for example.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These conditions should now be impossible, and we need to fix them if they
happen.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SMT balancing has a couple of problems.  Firstly, active_load_balance is too
complex - basically it should be a dumb helper for when the periodic balancer
has determined there is an imbalance, but gets stuck because the task is
running.

So rip out all its "smarts", and just make it move one task to the target CPU.

Second, the busy CPU's sched-domain tree was being used for active balancing.
This means that it may not see that nr_balance_failed has reached a critical
level.  So use the target CPU's sched-domain tree for this.  We can do this
because we hold its runqueue lock.

Lastly, reset nr_balance_failed to a point where we allow cache hot migration.
This will help ensure active load balancing is successful.

Thanks to Suresh Siddha for pointing out these issues.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up active load balancing a bit so it doesn't get called when it shouldn't.
Reset the nr_balance_failed counter at more points where we have found
conditions to be balanced.  This reduces too aggressive active balancing seen
on some workloads.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

John Hawkes explained the problem best:

	A large number of processes that are pinned to a single CPU results
	in every other CPU's load_balance() seeing this overloaded CPU as
	"busiest", yet move_tasks() never finds a task to pull-migrate.  This
	condition occurs during module unload, but can also occur as a
	denial-of-service using sys_sched_setaffinity().  Several hundred
	CPUs performing this fruitless load_balance() will livelock on the
	busiest CPU's runqueue lock.  A smaller number of CPUs will livelock
	if the pinned task count gets high.

Expanding slightly on John's patch, this one attempts to work out whether the
balancing failure has been due to too many tasks pinned on the runqueue.  This
allows it to be basically invisible to the regular blancing paths (ie.  when
there are no pinned tasks).  We can use this extra knowledge to shut down the
balancing faster, and ensure the migration threads don't start running which
is another problem observed in the wild.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>