This commit adds support for the TS-4800 interrupt controller. This
controller is instantiated in a companion FPGA, and multiplex interrupts
for other FPGA IPs.

As this component is external to the SoC, the SoC might need to reserve
pins, so this controller is implemented as a platform driver and doesn't
use the IRQCHIP_DECLARE construct.
Signed-off-by: NDamien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: kernel@savoirfairelinux.com
Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This is an interrupt-controller implemented in an FPGA, to multiplex
interrupts generated from other IPs. The FPGA usually uses a GPIO as a
parent interrupt controller to notify that one of the multiplexed
interrupts has triggered.
Signed-off-by: NDamien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: kernel@savoirfairelinux.com
Link: http://lkml.kernel.org/r/1450728683-31416-1-git-send-email-damien.riegel@savoirfairelinux.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The current MSI framework can only support 256 platform MSIs. But on Hisilicon
platform, some network related devices has about 500 wired interrupts.

To support these devices and align with MSI-X increase the maximum to 2048
devices.
Signed-off-by: NMa Jun <majun258@huawei.com>
Cc: <Catalin.Marinas@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <Will.Deacon@arm.com>
Cc: <mark.rutland@arm.com>
Cc: <marc.zyngier@arm.com>
Cc: <jason@lakedaemon.net>
Cc: <lizefan@huawei.com>
Cc: <huxinwei@huawei.com>
Cc: <dingtianhong@huawei.com>
Cc: <liguozhu@hisilicon.com>
Cc: <guohanjun@huawei.com>
Link: http://lkml.kernel.org/r/1450752442-9392-1-git-send-email-majun258@huawei.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch contain fixes for v2m resources and SPI ranges:

  * Fix off-by-one error when set up v2m resource end range in
    gicv2m_acpi_init().

  * Fix the off-by-one print error for SPI range.

  * Use %pR to properly print resource range information.

Both ACPI and DT should now print:

  GICv2m: range[mem 0xe1180000-0xe1180fff], SPI[64:319]
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: <hanjun.guo@linaro.org>
Cc: <tomasz.nowicki@linaro.org>
Cc: <graeme.gregory@linaro.org>
Cc: <dhdang@apm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <marc.zyngier@arm.com>
Cc: <jason@lakedaemon.net>
Cc: <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1450830263-28914-1-git-send-email-Suravee.Suthikulpanit@amd.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Avoid using hardcoded magics. We have a #define for this number.
No functional changes.
Signed-off-by: NAndrea Merello <andrea.merello@gmail.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-5-git-send-email-eric@anholt.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

On my RPi2 I got a lot of:
unexpected IRQ trap at vector 00

This happens because bcm2836_arm_irqchip_handle_irq() is sometimes
invoked even if the ISR is clear, and this case is not handled.

This patch explicitly handle this case, fixing the kernel complaints
about the bad IRQ lookup.
Signed-off-by: NAndrea Merello <andrea.merello@gmail.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-4-git-send-email-eric@anholt.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The firmware sets the secondaries spinning waiting for a non-NULL
value to show up in the last IPI mailbox.

The original SMP port from the downstream tree was done by Andrea, and
Eric cleaned it up/rewrote it a few times from there.
Signed-off-by: NAndrea Merello <andrea.merello@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-3-git-send-email-eric@anholt.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The irqchip's register area includes the the setup for the timer's
scaling factors, and for the platform we want a fixed configuration of
these registers.
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-2-git-send-email-eric@anholt.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull irqchip core changes for v4.5 from Jason Cooper:

 - renesas-intc-irqpin: Remove platform code, improve clock handling

 - sunxi-nmi: Extend NMI support to include A80

Merge branch 'irq/gic-v2m-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull another round of GIC changes from Marc:

 ACPI support for GIV-v2m

This patch introduces gicv2m_acpi_init(), which uses information
in MADT GIC MSI frames structure to initialize GICv2m driver.
It also exposes gicv2m_init() function, which simplifies callers
to a single GICv2m init function.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NDuc Dang <dhdang@apm.com>
Acked-by: NRafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch replaces the struct device_node with struct fwnode_handle
since this structure is common between DT and ACPI.

It also refactors gicv2m_init_one() to prepare for ACPI support.
The only functional change is removing the node name from pr_info.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Since there will be several places checking if fwnode.type
is equal FWNODE_IRQCHIP, this patch adds a convenient function
for this purpose.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch introduces pci_msi_register_fwnode_provider() for irqchip
to register a callback, to provide a way to determine appropriate MSI
domain for a pci device.

It also introduces pci_host_bridge_acpi_msi_domain(), which returns
the MSI domain of the specified PCI host bridge with DOMAIN_BUS_PCI_MSI
bus token. Then, it is assigned to pci device.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The Linux kernel already has the concept of IRQ domain, wherein a
component can expose a set of IRQs which are managed by a particular
interrupt controller chip or other subsystem. The PCI driver exposes
the notion of an IRQ domain for Message-Signaled Interrupts (MSI) from
PCI Express devices. This patch exposes the functions which are
necessary for creating a MSI IRQ domain within a module.

[ tglx: Split it into x86 and core irq parts ]
Signed-off-by: NJake Oshins <jakeo@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: kys@microsoft.com
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: vkuznets@redhat.com
Cc: haiyangz@microsoft.com
Cc: marc.zyngier@arm.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1449769983-12948-4-git-send-email-jakeo@microsoft.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Merge branch 'irq/gic-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull the GIC related updates from Marc Zyngier:

 "Not a lot this time (what a relief!), but an interesting series from
  Linus Walleij coming out of his work converting the ARM RealView
  platforms to DT, and a couple of mundane fixes."

Merge branch 'irq/wire-msi-bridge' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull the MSI wire bridge implementation from Marc Zyngier along with
the first user of it. This is infrastructure to support a wired
interrupt to MSI interrupt brigde. The first user is mbigen found in
Hisilicon ARM SoCs.

Add the interrupt controller chip operation functions of mbigen chip.
Signed-off-by: NMa Jun <majun258@huawei.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.
Signed-off-by: NMa Jun <majun258@huawei.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Mbigen means Message Based Interrupt Generator(MBIGEN).

Its a kind of interrupt controller that collects
the interrupts from external devices and generate msi interrupt.
Mbigen is applied to reduce the number of wire connected interrupts.

As the peripherals increasing, the interrupts lines needed is
increasing much, especially on the Arm64 server SOC.

Therefore, the interrupt pin in GIC is not enough to cover so
many peripherals.

Mbigen is designed to fix this problem.

Mbigen chip locates in ITS or outside of ITS.

Mbigen chip hardware structure shows as below:

		mbigen chip
|---------------------|-------------------|
mgn_node0	  mgn_node1		mgn_node2
 |		 |-------|		|-------|------|
dev1		dev1    dev2		dev1   dev3   dev4

Each mbigen chip contains several mbigen nodes.

External devices can connect to mbigen node through wire connecting way.

Because a mbigen node only can support 128 interrupt maximum, depends
on the interrupt lines number of devices, a device can connects to one
more mbigen nodes.

Also, several different devices can connect to a same mbigen node.

When devices triggered interrupt,mbigen chip detects and collects
the interrupts and generates the MBI interrupts by writing the ITS
Translator register.

To simplify mbigen driver,I used a new conception--mbigen device.
Each mbigen device is initialized as a platform device.

Mbigen device presents the parts(register, pin definition etc.) in
mbigen chip corresponding to a peripheral device.

So from software view, the structure likes below

	            mbigen chip
     |---------------------|-----------------|
mbigen device1       mbigen device2  mbigen device3
      |                   |                |
     dev1                dev2             dev3
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMa Jun <majun258@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the mbigen msi interrupt controller bindings document.

This patch based on Mark Rutland's patch
https://lkml.org/lkml/2015/7/23/558Signed-off-by: NMa Jun <majun258@huawei.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

There is currently a hack in the GIC driver making it possible
to pass the number of GIC instances from the platform-specific
include files and thus override the variable MAX_GIC_NR.

With multiplatform deployments, this will not work as we need
to get rid of the platform-specific include files.

It turns out that this feature is only used by the RealView
platform which has a cascaded GIC. So move the configuration
to Kconfig and bump to 2 instances if we're building for the
RealView. The include file hacks can then be removed.

Tested on the ARM PB11MPCore with its cascaded GIC.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The GIC has no such thing as interrupt 1020: the last valid ID is
1019, and the range 1020-1023 is reserved - 1023 indicating that
no interrupt is pending. So let's make sure we don't try to handle
this ID.

This bug has been in since the initial GIC code was introduced in
8ad68bbf ("[ARM] Add support for ARM RealView board").
Reported-by: NEric Auger <eric.auger@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

On the error path, the v2m drivers drops the refcount on the parent
node instead of doing it on the node that generated the error.
Humph...
Reported-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Instead of having the irqchip being a static struct, make it part
of the per-instance data so we can assign it a dynamic name. This
has the usable side effect of displaying the GIC with an instance
number as GIC0, GIC1 ... GICn in /proc/interrupts, which is helpful
when debugging cascaded GICs, such as on the ARM PB11MPCore.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The ARM RealView PB11MPCore reference design has some special
bits in a system controller register to set up the GIC in one
of three modes: legacy, new with DCC, new without DCC. The
register is also used to enable FIQ.

Since the platform will not boot unless this register is set
up to "new with DCC" mode, we need a special quirk to be
compiled-in for the RealView platforms.

If we find the right compatible string on the GIC TestChip,
we enable this quirk by looking up the system controller and
enabling the special bits.

We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old
boardfile code has the same fix hardcoded, and this is only
needed for the attempts to modernize the RealView code using
device tree.

After fixing this, the PB11MPCore boots with device tree
only.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The GIC bindings for the ARM11MPCore need to differentiate between
the GIC on the Test Chip and the one on the evaluation baseboard.
Split the binding in two and define new compatible-strings.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: devicetree@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We almost have all the needed bits requiredable to create a irq domain
on top of a MSI domain.

For this, we enable a few things:
- the virq is stored in the msi_desc
- device, msi_alloc_info and domain-specific data
  are stored in the platform_priv_data structure
- we introduce a new API for platform-msi:

  /* Create a MSI-based domain */
  struct irq_domain *
  platform_msi_create_device_domain(struct device *dev,
                                    unsigned int nvec,
                                    irq_write_msi_msg_t write_msi_msg,
                                    const struct irq_domain_ops *ops,
                                    void *host_data);

  /* Allocate MSIs in an MSI domain */
  int platform_msi_domain_alloc(struct irq_domain *domain,
				unsigned int virq,
				unsigned int nr_irqs);

  /* Free MSIs from an MSI domain */
  void platform_msi_domain_free(struct irq_domain *domain,
				unsigned int virq,
				unsigned int nvec);

  /* Obtain the host data passed to platform_msi_create_device_domain */
  void *platform_msi_get_host_data(struct irq_domain *domain);

platform_msi_create_device_domain() is a hybrid of irqdomain creation
and interrupt allocation, creating a domain backed by the MSIs associated
to a device. IRQs can then be allocated in that domain using
platform_msi_domain_alloc().

This now allows a wired irq to MSI bridge to be created.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

To be able to allocate interrupts from the MSI layer down,
add a new msi_domain_populate_irqs entry point.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The .prepare callbacks are so far only called from msi_domain_alloc_irqs.
In order to reuse that code, split that code and create a
msi_domain_prepare_irqs function that the existing code can call into.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We are soon going to need the MSI layer to call into the domain
allocators. Instead of open coding this, make the standard
irq_domain_alloc_irqs_recursive function available to the MSI
layer.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we're going to have multiple paths to allocate/free the
platform-msi private data, factor this out into separate
utility functions.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

MSIs for a given device are normally all allocated in one go.
Make sure the internal code can allocate them one at a time
if required.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The new VMD device driver needs to iterate over a list of
"demultiplexing" interrupts. Protecting that list with a lock is not
possible because the list is also required in code pathes which hold
irq descriptor lock. Therefor the demultiplexing interrupt handler
would create a lock inversion scenario if it calls a demux handler
with the list protection lock held.

A solution for this is to free the irq descriptor via RCU, so the
list can be walked with rcu read lock held.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Keith Busch <keith.busch@intel.com>

Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/

His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().

We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed.  We must
instead pass the initial state along and use that.

Fixes: 68985633 ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: NJan Stancek <jstancek@redhat.com>
Reported-by: NChris Mason <clm@fb.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Tested-by: NVladimir Murzin <vladimir.murzin@arm.com>
Tested-by: NChris Mason <clm@fb.com>
Reviewed-by: NPaul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfix from Trond Myklebust:
 "SUNRPC: Fix a NFSv4.1 callback channel regression"

* tag 'nfs-for-4.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Fix callback channel

Pull timer fixlets from Thomas Gleixner:
 "Two trivial fixes which add missing header fileas and forward
  declarations so the code will compile even when the magic include
  chains are different"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Add missing include for barrier.h
  irqchip/gic-v3: Add missing struct device_node declaration

Pull timer fix from Thomas Gleixner:
 "A single fix to unbreak a clocksource driver which has more than 32bit
  counter width"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Mmio: remove artificial 32bit limitation