1. 13 5月, 2011 2 次提交
  2. 12 5月, 2011 3 次提交
    • B
      sfc: Always map MCDI shared memory as uncacheable · 747df225
      Ben Hutchings 提交于
      We enabled write-combining for memory-mapped registers in commit
      65f0b417, but inhibited it for the
      MCDI shared memory where this is not supported.  However,
      write-combining mappings also allow read-reordering, which may also
      be a problem.
      
      I found that when an SFC9000-family controller is connected to an
      Intel 3000 chipset, and write-combining is enabled, the controller
      stops responding to PCIe read requests during driver initialisation
      while the driver is polling for completion of an MCDI command.  This
      results in an NMI and system hang.  Adding read memory barriers
      between all reads to the shared memory area appears to reduce but not
      eliminate the probability of this.
      
      We have not yet established whether this is a bug in our BIU or in the
      PCIe bridge.  For now, work around by mapping the shared memory area
      separately.
      Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
      747df225
    • A
      ehea: Fix memory hotplug oops · 21ccc793
      Anton Blanchard 提交于
      The ehea driver oopses during memory hotplug if the ports are not
      up. A simple testcase:
      
      # ifconfig ethX down
      # echo offline > /sys/devices/system/memory/memory32/state
      
      Oops: Kernel access of bad area, sig: 11 [#1]
      last sysfs file: /sys/devices/system/memory/memory32/state
      REGS: c000000709393110 TRAP: 0300   Not tainted  (2.6.39-rc2-01385-g7ef73bca-dirty)
      DAR: 0000000000000000, DSISR: 40000000
      ...
      NIP [c000000000067c98] .__wake_up_common+0x48/0xf0
      LR [c00000000006d034] .__wake_up+0x54/0x90
      Call Trace:
      [c00000000006d034] .__wake_up+0x54/0x90
      [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea]
      [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea]
      [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0
      [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0
      [c000000000458d78] .memory_notify+0x28/0x40
      [c0000000001871d8] .remove_memory+0x208/0x6d0
      [c000000000458264] .memory_section_action+0x94/0x140
      [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0
      [c0000000004585cc] .store_mem_state+0xec/0x160
      [c00000000044768c] .sysdev_store+0x3c/0x50
      [c00000000020b48c] .sysfs_write_file+0xec/0x1f0
      [c00000000018f86c] .vfs_write+0xec/0x1e0
      [c00000000018fa88] .SyS_write+0x58/0xd0
      
      To fix this, initialise the waitqueues during port probe instead
      of port open.
      Signed-off-by: NAnton Blanchard <anton@samba.org>
      Cc: stable@kernel.org
      Acked-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      21ccc793
    • D
  3. 11 5月, 2011 11 次提交
    • D
    • O
      slcan: fix ldisc->open retval · 0d4420a9
      Oliver Hartkopp 提交于
      TTY layer expects 0 if the ldisc->open operation succeeded.
      Reported-by: NMatvejchikov Ilya <matvejchikov@gmail.com>
      Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0d4420a9
    • D
      net/usb: mark LG VL600 LTE modem ethernet interface as WWAN · aae1e743
      Dan Williams 提交于
      Like other mobile broadband device ethernet interfaces, mark the LG
      VL600 with the 'wwan' devtype so userspace knows it needs additional
      configuration via the AT port before the interface can be used.
      Signed-off-by: NDan Williams <dcbw@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      aae1e743
    • S
      xfrm: Don't allow esn with disabled anti replay detection · 6fa5ddcc
      Steffen Klassert 提交于
      Unlike the standard case, disabled anti replay detection needs some
      nontrivial extra treatment on ESN. RFC 4303 states:
      
      Note: If a receiver chooses to not enable anti-replay for an SA, then
      the receiver SHOULD NOT negotiate ESN in an SA management protocol.
      Use of ESN creates a need for the receiver to manage the anti-replay
      window (in order to determine the correct value for the high-order
      bits of the ESN, which are employed in the ICV computation), which is
      generally contrary to the notion of disabling anti-replay for an SA.
      
      So return an error if an ESN state with disabled anti replay detection
      is inserted for now and add the extra treatment later if we need it.
      Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6fa5ddcc
    • S
      xfrm: Assign the inner mode output function to the dst entry · 43a4dea4
      Steffen Klassert 提交于
      As it is, we assign the outer modes output function to the dst entry
      when we create the xfrm bundle. This leads to two problems on interfamily
      scenarios. We might insert ipv4 packets into ip6_fragment when called
      from xfrm6_output. The system crashes if we try to fragment an ipv4
      packet with ip6_fragment. This issue was introduced with git commit
      ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets
      as needed). The second issue is, that we might insert ipv4 packets in
      netfilter6 and vice versa on interfamily scenarios.
      
      With this patch we assign the inner mode output function to the dst entry
      when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner
      mode is used and the right fragmentation and netfilter functions are called.
      We switch then to outer mode with the output_finish functions.
      Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      43a4dea4
    • E
      net: dev_close() should check IFF_UP · e14a5993
      Eric Dumazet 提交于
      Commit 44345724 (factorize sync-rcu call in
      unregister_netdevice_many) mistakenly removed one test from dev_close()
      
      Following actions trigger a BUG :
      
      modprobe bonding
      modprobe dummy
      ifconfig bond0 up
      ifenslave bond0 dummy0
      rmmod dummy
      
      dev_close() must not close a non IFF_UP device.
      
      With help from Frank Blaschka and Einar EL Lueck
      Reported-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
      Reported-by: NEinar EL Lueck <ELELUECK@de.ibm.com>
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e14a5993
    • E
      vlan: fix GVRP at dismantle time · 55aee10d
      Eric Dumazet 提交于
      ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on
      ip link set eth2.103 up
      rmmod tg3    # driver providing eth2
      
       BUG: unable to handle kernel NULL pointer dereference at           (null)
       IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
       PGD 11d251067 PUD 11b9e0067 PMD 0
       Oops: 0000 [#1] SMP
       last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex
       CPU 0
       Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables]
      
       Pid: 11494, comm: rmmod Tainted: G        W   2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6
       RIP: 0010:[<ffffffffa0030c9e>]  [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp]
       RSP: 0018:ffff88007a19bae8  EFLAGS: 00010286
       RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002
       RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b
       RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00
       R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002
       R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001
       FS:  0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0
       CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
       CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0
       DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
       DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
       Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0)
       Stack:
        ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48
        ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6
        ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7
       Call Trace:
        [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q]
        [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q]
        [<ffffffff8137e427>] __dev_close_many+0x87/0xe0
        [<ffffffff8137e507>] dev_close_many+0x87/0x110
        [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240
        [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60
        [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q]
        [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0
        [<ffffffff81479d03>] notifier_call_chain+0x53/0x80
        [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10
        [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240
        [<ffffffff8137e85f>] rollback_registered+0x2f/0x40
        [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90
        [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30
        [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3]
      
      We should call vlan_gvrp_request_leave() from unregister_vlan_dev(),
      not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant()
      is called right after unregister_netdevice_queue(). In batch mode,
      unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop().
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      55aee10d
    • P
      libertas: fix cmdpendingq locking · 2ae1b8b3
      Paul Fox 提交于
      We occasionally see list corruption using libertas.
      
      While we haven't been able to diagnose this precisely, we have spotted
      a possible cause: cmdpendingq is generally modified with driver_lock
      held. However, there are a couple of points where this is not the case.
      
      Fix up those operations to execute under the lock, it seems like
      the correct thing to do and will hopefully improve the situation.
      Signed-off-by: NPaul Fox <pgf@laptop.org>
      Signed-off-by: NDaniel Drake <dsd@laptop.org>
      Acked-by: NDan Williams <dcbw@redhat.com>
      Cc: stable@kernel.org
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      2ae1b8b3
    • S
      iwlegacy: fix IBSS mode crashes · eb85de3f
      Stanislaw Gruszka 提交于
      We should not switch to non-IBSS channels when working in IBSS mode,
      otherwise there are microcode errors, and after some time system
      crashes.
      
      This bug is only observable when software scan is used in IBSS mode,
      so should be considered as regression after:
      
      commit 0263aa45
      Author: Stanislaw Gruszka <sgruszka@redhat.com>
      Date:   Tue Mar 29 11:24:21 2011 +0200
      
          iwl3945: disable hw scan by default
      
      However IBSS mode check, which this patch add again, was removed by
      
      commit b2f30e8b
      Author: Johannes Berg <johannes.berg@intel.com>
      Date:   Thu Jan 21 07:32:20 2010 -0800
      
          iwlwifi: remove IBSS channel sanity check
      
      That commit claim that mac80211 will not use non-IBSS channel in IBSS
      mode, what definitely is not true. Bug probably should be fixed in
      mac80211, but that will require more work, so better to apply that patch
      temporally, and provide proper mac80211 fix latter.
      
      Resolves:
      https://bugzilla.kernel.org/show_bug.cgi?id=34452Reported-and-tested-by: NMikko Rapeli <mikko.rapeli@iki.fi>
      Cc: stable@kernel.org # 2.6.38.5+
      Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      eb85de3f
    • M
      ath9k: Fix a warning due to a queued work during S3 state · 99aa55b6
      Mohammed Shafi Shajakhan 提交于
      during suspend/S3 state drv_flush is called from mac80211 irrespective of
      interface count. In ath9k we queue a work in ath9k_flush which we expect
      to be cancelled in the drv_stop call back. during suspend process mac80211
      calls drv_stop only when the interface count(local->count) is non-zero.
      unfortunately when the network manager is enabled, drv_flush is called
      while drv_stop is not called as local->count reaches '0'.
      	So fix this by simply checking for the device presence in the
      drv_flush call back in the driver before queueing work or anything else.
      this patch fixes the following WARNING
      
      	Call Trace:
      	[<c014c6e2>] warn_slowpath_common+0x72/0xa0
      	[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
      	[<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211]
      	[<c014c75b>] warn_slowpath_fmt+0x2b/0x30
      	[<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211]
      	[<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211]
      	[<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k]
      	[<c016399e>] run_workqueue+0x8e/0x150
      	[<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k]
      	[<c0163ae4>] worker_thread+0x84/0xe0
      	[<c0167a60>] ? autoremove_wake_function+0x0/0x50
      	[<c0163a60>] ? worker_thread+0x0/0xe0
      	[<c01677d4>] kthread+0x74/0x80
      	[<c0167760>] ? kthread+0x0/0x80
      	[<c0104087>] kernel_thread_helper+0x7/0x10
      ---[ end trace 2aff81010df9215b ]---
      Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com>
      Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      99aa55b6
    • L
      mac80211: don't start the dynamic ps timer if not associated · 5db1c07c
      Luciano Coelho 提交于
      When we are disconnecting, we set PS off, but this happens before we
      send the deauth/disassoc request.  When the deauth/disassoc frames are
      sent, we trigger the dynamic ps timer, which then times out and turns
      PS back on.  Thus, PS remains on after disconnecting, causing problems
      when associating again.
      
      This can be fixed by preventing the timer to start when we're not
      associated anymore.
      Signed-off-by: NLuciano Coelho <coelho@ti.com>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      5db1c07c
  4. 10 5月, 2011 14 次提交
  5. 09 5月, 2011 2 次提交
  6. 07 5月, 2011 2 次提交
    • R
      vmxnet3: Consistently disable irqs when taking adapter->cmd_lock · e328d410
      Roland Dreier 提交于
      Using the vmxnet3 driver produces a lockdep warning because
      vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
      adapter->cmd_lock.  However, there are a couple of places where
      adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
      softirq that tries to take mc->mca_lock could happen while
      adapter->cmd_lock is held, leading to an AB-BA deadlock.
      
      I'm not sure if this is a real potential deadlock or not, but the
      simplest and best fix seems to be simply to make sure we take cmd_lock
      with spin_lock_irqsave() everywhere -- the places with plain spin_lock
      just look like oversights.
      
      The full enormous lockdep warning is:
      
       =========================================================
       [ INFO: possible irq lock inversion dependency detected ]
       2.6.39-rc6+ #1
       ---------------------------------------------------------
       ifconfig/567 just changed the state of lock:
        (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
       but this lock took another, SOFTIRQ-unsafe lock in the past:
        (&(&adapter->cmd_lock)->rlock){+.+...}
      
       and interrupts could create inverse lock ordering between them.
      
       other info that might help us debug this:
       4 locks held by ifconfig/567:
        #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
        #1:  ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
        #2:  (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
        #3:  (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280
      
       the shortest dependencies between 2nd lock and 1st lock:
         -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
            HARDIRQ-ON-W at:
                                                  [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                                  [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                                  [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                                  [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                                  [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                                  [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                                  [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                                  [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                                  [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                                  [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                                  [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                                  [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                                  [<ffffffff813745b6>] driver_register+0x76/0x140
                                                  [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                                  [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                                  [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                                  [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                                  [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
            SOFTIRQ-ON-W at:
                                                  [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
                                                  [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                                  [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                                  [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                                  [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                                  [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                                  [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                                  [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                                  [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                                  [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                                  [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                                  [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                                  [<ffffffff813745b6>] driver_register+0x76/0x140
                                                  [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                                  [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                                  [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                                  [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                                  [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
            INITIAL USE at:
                                                 [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                                 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                                 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                                 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                                 [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                                 [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                                 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                                 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                                 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                                 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                                 [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                                 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                                 [<ffffffff813745b6>] driver_register+0x76/0x140
                                                 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                                 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                                 [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                                 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                                 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
          }
          ... key      at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
          ... acquired at:
          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
          [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
          [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
          [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
          [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
          [<ffffffff81470127>] __dev_open+0xc7/0x100
          [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
          [<ffffffff81470568>] dev_change_flags+0x28/0x70
          [<ffffffff814da960>] devinet_ioctl+0x730/0x800
          [<ffffffff814db508>] inet_ioctl+0x88/0xa0
          [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
          [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
          [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
          [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      
        -> (_xmit_ETHER){+.....} ops: 6 {
           HARDIRQ-ON-W at:
                                                [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                                [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                                [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                                [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                                [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                                [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                                [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                                [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                                [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                                [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                                [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                                [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                                [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                                [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                                [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                                [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                                [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                                [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                                [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                                [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                                [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                                [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                                [<ffffffff813745b6>] driver_register+0x76/0x140
                                                [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                                [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                                [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                                [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                                [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
           INITIAL USE at:
                                               [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                               [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                               [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                               [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                               [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                               [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                               [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                               [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                               [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                               [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                               [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                               [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                               [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                               [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                               [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                               [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                               [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                               [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                               [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                               [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                               [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                               [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                               [<ffffffff813745b6>] driver_register+0x76/0x140
                                               [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                               [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                               [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                               [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                               [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
         }
         ... key      at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
         ... acquired at:
          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
          [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
          [<ffffffff81475618>] __dev_mc_add+0x38/0x90
          [<ffffffff814756a0>] dev_mc_add+0x10/0x20
          [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
          [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
          [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
          [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
          [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
          [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
          [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
          [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
          [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
          [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
          [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
          [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
          [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
          [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
          [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
          [<ffffffff81373a2e>] driver_attach+0x1e/0x20
          [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
          [<ffffffff813745b6>] driver_register+0x76/0x140
          [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
          [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
          [<ffffffff81002165>] do_one_initcall+0x45/0x190
          [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      
       -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
          HARDIRQ-ON-W at:
                                              [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                              [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                              [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                              [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                              [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                              [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                              [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                              [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                              [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                              [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                              [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
          IN-SOFTIRQ-W at:
                                              [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
                                              [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                              [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                              [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
                                              [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
                                              [<ffffffff810666d0>] __do_softirq+0xc0/0x210
                                              [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
                                              [<ffffffff8100d42d>] do_softirq+0xad/0xe0
                                              [<ffffffff81066afe>] irq_exit+0x9e/0xb0
                                              [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
                                              [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
                                              [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
                                              [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
                                              [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
                                              [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
                                              [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                              [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
                                              [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
                                              [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
                                              [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
                                              [<ffffffff814da731>] devinet_ioctl+0x501/0x800
                                              [<ffffffff814db508>] inet_ioctl+0x88/0xa0
                                              [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
                                              [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
                                              [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
                                              [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
                                              [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
          INITIAL USE at:
                                             [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                             [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                             [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                             [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                             [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                             [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                             [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                             [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                             [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                             [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                             [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
        }
        ... key      at: [<ffffffff82801be2>] __key.40877+0x0/0x8
        ... acquired at:
          [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
          [<ffffffff8109a32c>] mark_lock+0x19c/0x400
          [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
          [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
          [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
          [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
          [<ffffffff810666d0>] __do_softirq+0xc0/0x210
          [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
          [<ffffffff8100d42d>] do_softirq+0xad/0xe0
          [<ffffffff81066afe>] irq_exit+0x9e/0xb0
          [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
          [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
          [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
          [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
          [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
          [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
          [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
          [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
          [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
          [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
          [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
          [<ffffffff814da731>] devinet_ioctl+0x501/0x800
          [<ffffffff814db508>] inet_ioctl+0x88/0xa0
          [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
          [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
          [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
          [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      
       stack backtrace:
       Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
       Call Trace:
        <IRQ>  [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
        [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
        [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
        [<ffffffff8109a32c>] mark_lock+0x19c/0x400
        [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
        [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
        [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
        [<ffffffff81012255>] ? native_sched_clock+0x15/0x70
        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
        [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
        [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
        [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
        [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
        [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
        [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
        [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
        [<ffffffff810122b9>] ? sched_clock+0x9/0x10
        [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
        [<ffffffff810666d0>] __do_softirq+0xc0/0x210
        [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
        [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
        [<ffffffff8100d42d>] do_softirq+0xad/0xe0
        [<ffffffff81066afe>] irq_exit+0x9e/0xb0
        [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
        [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
        <EOI>  [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
        [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
        [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
        [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
        [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
        [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
        [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
        [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
        [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
        [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
        [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
        [<ffffffff814da731>] devinet_ioctl+0x501/0x800
        [<ffffffff8108a3af>] ? local_clock+0x6f/0x80
        [<ffffffff81575898>] ? do_page_fault+0x268/0x560
        [<ffffffff814db508>] inet_ioctl+0x88/0xa0
        [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
        [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
        [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
        [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
        [<ffffffff8117737e>] ? fget_light+0x33e/0x430
        [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
        [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
        [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      Signed-off-by: NRoland Dreier <roland@purestorage.com>
      Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
      Signed-off-by: NScott J. Goldman <scottjg@vmware.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e328d410
    • D
      dccp: handle invalid feature options length · a2948659
      Dan Rosenberg 提交于
      A length of zero (after subtracting two for the type and len fields) for
      the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
      the subtraction.  The subsequent code may read past the end of the
      options value buffer when parsing.  I'm unsure of what the consequences
      of this might be, but it's probably not good.
      Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
      Cc: stable@kernel.org
      Acked-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a2948659
  7. 06 5月, 2011 2 次提交
    • K
      can: fix SJA1000 dlc for RTR packets · 87e9af6c
      Kurt Van Dijck 提交于
      RTR frames do have a valid data length code on CAN.
      The driver for SJA1000 did not handle that situation properly.
      Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
      Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      87e9af6c
    • M
      usbnet: runtime pm: fix out of memory · 75bd0cbd
      Ming Lei 提交于
      This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
      fix one out of memory issue, which can be reproduced on omap3/4 based
      pandaboard/beagle XM easily with steps below:
      
      	- enable runtime pm
      	echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control
      
      	- ifconfig eth0 up
      
      	- then out of memroy happened, see [1] for kernel message.
      
      Follows my analysis:
      	- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
      	is called to schedule dev->bh, then rx urbs are submited to prepare for
      	recieving data;
      
      	- some usbnet devices will produce garbage rx packets flood if
      	info->reset is not called in usbnet_open.
      
      	- so there is no enough chances for usbnet_bh to handle and release
      	recieved skb buffers since many rx interrupts consumes cpu, so out of memory
      	for atomic allocation in rx_submit happened.
      
      This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
      is opened.
      
      [1], dmesg
      [  234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
      [  234.712066] usb 1-1.1: rpm_resume flags 0x0
      [  234.712066] usb 1-1: rpm_resume flags 0x0
      [  234.712097] usb usb1: rpm_resume flags 0x0
      [  234.712127] usb usb1: usb auto-resume
      [  234.712158] ehci-omap ehci-omap.0: resume root hub
      [  234.754028] hub 1-0:1.0: hub_resume
      [  234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
      [  234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
      [  234.756042] hub 1-0:1.0: rpm_resume flags 0x4
      [  234.756072] usb usb1: rpm_resume flags 0x0
      [  234.756164] usb usb1: rpm_resume returns 1
      [  234.756195] hub 1-0:1.0: rpm_resume returns 0
      [  234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
      [  234.756225] hub 1-0:1.0: rpm_suspend returns 0
      [  234.756256] usb usb1: rpm_resume returns 0
      [  234.757141] usb 1-1: usb auto-resume
      [  234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
      [  234.816558] usb 1-1: finish resume
      [  234.817871] hub 1-1:1.0: hub_resume
      [  234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
      [  234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule
      [  234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us]
      [  234.820587] usb 1-1: rpm_resume returns 0
      [  234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
      [  234.820800] hub 1-1:1.0: rpm_resume flags 0x4
      [  234.820831] hub 1-1:1.0: rpm_resume returns 0
      [  234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
      [  234.820861] hub 1-1:1.0: rpm_suspend returns 0
      [  234.821777] usb 1-1.1: usb auto-resume
      [  234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
      [  234.868591] hub 1-1:1.0: rpm_resume flags 0x4
      [  234.868621] hub 1-1:1.0: rpm_resume returns 0
      [  234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
      [  234.868652] hub 1-1:1.0: rpm_suspend returns 0
      [  234.879486] usb 1-1.1: finish resume
      [  234.880279] usb 1-1.1: rpm_resume returns 0
      [  234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
      [  238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
      [  238.880218] Backtrace:
      [  238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c)
      [  238.880249]  r6:00000000 r5:00000000 r4:00000020 r3:00000002
      [  238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
      [  238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
      [  238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154)
      [  238.880371]  r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020
      [  238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
      [  238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190)
      [  238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8)
      [  238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
      [  238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
      [  238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
      [  238.880737]  r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20
      [  238.880767] r3:bf050b9c
      [  238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
      [  238.880859]  r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34
      [  238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
      [  238.880920]  r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac
      [  238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
      [  238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
      [  238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
      [  238.881072]  r4:eeeced34 r3:00000001
      [  238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
      [  238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240)
      [  238.881225]  r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8
      [  238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64)
      [  238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114)
      [  238.881286]  r6:0000006d r5:c080c14c r4:c080c100 r3:00020000
      [  238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0)
      [  238.881317]  r5:00000000 r4:0000006d
      [  238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134)
      [  238.881378] Exception stack(0xef837e20 to 0xef837e68)
      [  238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
      [  238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
      [  238.881408] 7e60: 20000013 ffffffff
      [  238.881408]  r5:fa240100 r4:ffffffff
      [  238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8)
      [  238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
      [  238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
      [  238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8)
      [  238.881530]  r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224
      [  238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290)
      [  238.881561]  r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001
      [  238.881591] r3:c01f907c
      [  238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
      [  238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98)
      [  238.881652]  r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc
      [  238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374)
      [  238.881713]  r6:c01f62f4 r5:c0211320 r4:ef831efc
      [  238.881713] Mem-info:
      [  238.881744] Normal per-cpu:
      [  238.881744] CPU    0: hi:  186, btch:  31 usd:  38
      [  238.881744] CPU    1: hi:  186, btch:  31 usd: 169
      [  238.881774] HighMem per-cpu:
      [  238.881774] CPU    0: hi:   90, btch:  15 usd:  66
      [  238.881774] CPU    1: hi:   90, btch:  15 usd:  86
      [  238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
      [  238.881805]  active_file:926 inactive_file:2538 isolated_file:0
      [  238.881805]  unevictable:0 dirty:10 writeback:0 unstable:0
      [  238.881805]  free:57782 slab_reclaimable:864 slab_unreclaimable:186898
      [  238.881805]  mapped:632 shmem:144 pagetables:50 bounce:0
      [  238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
      [  238.881866] lowmem_reserve[]: 0 1904 1904
      [  238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
      [  238.881927] lowmem_reserve[]: 0 0 0
      [  238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
      [  238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
      [  238.882080] 3610 total pagecache pages
      [  238.882080] 0 pages in swap cache
      [  238.882080] Swap cache stats: add 0, delete 0, find 0/0
      [  238.882110] Free swap  = 0kB
      [  238.882110] Total swap = 0kB
      [  238.933776] 262144 pages of RAM
      [  238.933776] 58240 free pages
      [  238.933776] 10503 reserved pages
      [  238.933776] 187773 slab pages
      [  238.933807] 2475 pages shared
      [  238.933807] 0 pages swap cached
      Signed-off-by: NMing Lei <tom.leiming@gmail.com>
      Acked-by: NOliver Neukum <oneukum@suse.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      75bd0cbd
  8. 05 5月, 2011 1 次提交
    • E
      net: ip_expire() must revalidate route · 64f3b9e2
      Eric Dumazet 提交于
      Commit 4a94445c (net: Use ip_route_input_noref() in input path)
      added a bug in IP defragmentation handling, in case timeout is fired.
      
      When a frame is defragmented, we use last skb dst field when building
      final skb. Its dst is valid, since we are in rcu read section.
      
      But if a timeout occurs, we take first queued fragment to build one ICMP
      TIME EXCEEDED message. Problem is all queued skb have weak dst pointers,
      since we escaped RCU critical section after their queueing. icmp_send()
      might dereference a now freed (and possibly reused) part of memory.
      
      Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is
      the only possible choice.
      Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb>
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      64f3b9e2
  9. 03 5月, 2011 3 次提交