The argument passed to snd_hda_attach_beep_device() is a widget NID
while spec->beep_amp holds the composed value for amp controls.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This leaks the beep input device after module unload, which leads to
Oops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55321Signed-off-by: NTakashi Iwai <tiwai@suse.de>

During the transition to the generic parser, the hook to the codec
specific automute function was forgotten.  This resulted in the silent
output on some MacBooks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset
and check it in ca0132_download_dsp().
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec.  The dspload_is_loaded() function returns
true if the DSP transfer was never started.  This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called.  dsp_loaded should never be set to true in this case,
skip it.  The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If there are no internal speakers, we should not turn the eapd switch
off, because it might be necessary to keep high for Headphone.

BugLink: https://bugs.launchpad.net/bugs/1155016Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, the driver doesn't power down the widget at going down to D3
when the widget node has an EAPD capability and EAPD is actually set
on all codecs unless codec->power_filter is set explicitly.
This caused a problem on some Conexant codecs, leading to click
noises, and we set it as NULL there.  But it is very unlikely that the
problem hits only these codecs.

Looking back at the development history, this workaround for EAPD was
introduced just for some laptops with STAC9200 codec, then we applied
it blindly for all.  Now, since it's revealed to have an ill effect,
we should disable this workaround per default and apply only for the
known requiring systems.

The EAPD workaround is implemented now as snd_hda_codec_eapd_power_filter(),
and this has to be set explicitly by the codec driver when needed.
As of now, only patch_stac9200() sets this one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the dynamic array allocations for pins, converters and PCM arrays
instead of the fixed size arrays.  The modern HDMI codecs get more and
more pins, and we don't know the sensitive limit.

Most of the patch are spent for the straight conversions from the
fixed array access to snd_array helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the connection list expansion in hda_codec.c and hda_proc.c, the
value returned from snd_hda_get_num_raw_conns() is used as the array
size to store the connection list.  However, the function returns
simply a raw value of the AC_PAR_CONNLIST_LEN parameter, and the
widget list with ranges isn't considered there.  Thus it may return a
smaller size than the actual list, which results in -ENOSPC in
snd_hda_get_raw_conections().

This patch fixes the bug by parsing the connection list correctly also
for snd_hda_get_num_raw_conns().
Reported-and-tested-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a headphone pin is set up as a shared hp/mic pin, we rather want
to keep it as a headphone primarily as default, but the driver
overrides it always as a mic pin, just because the input controls are
created after outputs.  Add a check of pin NID and skip the
re-initialization of pinctl for such a shared hp/mic pin.
Reported-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the headphone mic jack enum control is created (via explicitly
specification by user), it doesn't make much sense to change the I/O
direction dynamically per capture source change, since the I/O
direction is rather controlled over the enum ctl.

This also reduces the implicit dependency between the capture source
and the hp mic jack enum ctls, which might confuse a program accessing
the whole control elements at once like alsactl.

In addition, this patch introduces update_hp_automute_hook() function
to call the proper hook function.  It's just to remove the open codes
in multiple places in hda_generic.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no big merit to distinguish these two hints.  Instead, just
have a single flag, add_jack_modes, for creating the jack mode enum
ctls for both I/O directions.

The hint string parser code is left and translated as add_jack_modes
just for keeping compatibility.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous commits added the capability to change the pin control of
hp/mic shared jack, but it actually didn't work as expected when the
value is changed from the output to the input, since I forgot to reset
the pin I/O bit in that case.  This patch fixes the problem.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In order to let user test the known workaround more easily, give a few
known fixups for ALC260 to the model strings so that it can be passed
via the module option.

Also, move the unusual setups found in FSC S7020 fixup into a special
model, fujitsu-jwse, Jonathan Woithe Special Edition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a headphone jack is configured as a shared hp/mic jack, the jack
mode enum needs to handle both input and output directions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch improves the generic parser code to allow to set up the
headphone jack as a mic input.  User can enable this feature by giving
hp_mic hint string.

The former shared hp/mic feature for the single built-in mic is still
retained.  This detection can be disabled now via hp_mic_detect hint
string, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's compatible with ALC282.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the zero check `hda_frame_size_words == 0' before the modulus
`buffer_size_words % hda_frame_size_words'.

Also remove the redundant null check `buffer_addx == NULL'.
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the new control cannot be created, this function will return to avoid
snd_hda_ctl_add dereferencing a NULL control pointer.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the SPDIF control array cannot be reallocated, the function
will return to avoid dereferencing a NULL pointer.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reported-by: NHarald Becker <ralda@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just as for analog codecs, a jack that isn't suitable for detection
(in this case, NO_PRESENCE was set) should be a phantom Jack
instead of a normal one.

Thanks to Raymond Yau for spotting.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/961286
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ELD validity can change during the lifetime of a presence detect,
so we need to be able to listen for changes on the ELD control.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Because the eld buffer can be simultaneously accessed from both
workqueue context (updating) and process context (kcontrol read),
we need to protect it with a mutex to guarantee consistency.

To avoid holding the mutex while reading the ELD info from the
codec, we introduce a temporary eld buffer.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For better readability, the information that is parsed out of the
ELD data is now put into a separate parsed_hdmi_eld struct.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Previously, it was possible to read the eld data of the previous
monitor connected. This should not be allowed.

Also refactor the function slightly.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently, eld_valid is never set to false, except at kernel module
load time. This patch makes sure that eld is no longer valid when
the cable is (hot-)unplugged.

Cc: stable@kernel.org
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the recent update, Fujitsu S7020 laptop with ALC260 codec lost the
speaker output, no matter how the amps and the pins are set.  After a
long debugging session, we found out that the default codec init code
is harmful for this machine, and we have to reset it to
ALC_INIT_NONE.
Reported-and-tested-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These two machines have no mute LED string in BIOS.

BugLink: https://bugs.launchpad.net/bugs/1128934Tested-by: NTammy Yang <tammy.yang@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This chip needs the speaker pin to go to D3 to avoid clicks,
so default_power_filter does not work here.

This was found on Thinkpad R61i/T61i but I guess it applies to
the entire chip. If not, quirks should be set for at least
PCI SSID 17aa:20ac.

Thanks to c4pp4 for testing.

BugLink: https://bugs.launchpad.net/bugs/886975Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've got a regression report wrt the IRQ issue related with the
power-save on a Dell machine, and disabling runtime PM works around.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=53441

Cc: <stable@vger.kernel.org> [v3.7+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current badness value used for the missing multi-io seems too
weak, and the multi-io tends to be skipped for desktop configurations
when no enough DACs are available.  It's because the total badness of
the multi-io becomes often larger than the badness with assigning an
individual DAC to a headphone jack.  This is good for one side, but it
seems that the surround outputs are more demanded by that.

This patch increases the badness value for the missing multi-io
slightly so that the multi-io would be preferred than the individual
headphone DAC if they conflict.  Through the tests with hda-emu,
mostly only desktop configurations with ALC662/663 and CMI codecs are
affected by this change, and all look reasonable.
Reported-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [dcda5806: ALSA: hda - Add workaround for conflicting
IEC958 controls] introduced a workaround for cards that have both
SPDIF and HDMI devices for giving device=1 to SPDIF control elements.
It turned out, however, that this workaround doesn't work well -

- The workaround checks only conflicts in a single codec, but SPDIF
  and HDMI are provided by multiple codecs in many cases, and

- ALSA mixer abstraction doesn't care about the device number in ctl
  elements, thus you'll get errors from amixer such as
  % amixer scontrols -c 0
  ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958
  Playback Switch',0,1,0) appears twice or more
  amixer: Mixer hw:0 load error: Invalid argument

This patch fixes the previous broken workaround.  Instead of changing
the device number of SPDIF ctl elements, shift the element indices of
such controls up to 16.  Also, the conflict check is performed over
all codecs found on the bus.

HDMI devices will be put to dev=0,index=0 as before.  Only the
conflicting SPDIF device is moved to a different place.  The new place
of SPDIF device is supposed by the updated alsa-lib HDA-Intel.conf,
respectively.
Reported-by: NStephan Raue <stephan@openelec.tv>
Reported-by: NAnssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org> [v3.8]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as
an unsigned long.  This makes dsp_chip_to_dsp_addx() misbehaving on
64bit architectures.  Fix the INVALID_CHIP_ADDRESS definition to be
32bit.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The problem addressed by this fixup is not specific to Vaio Z, affecting
some Vaio all-in-one desktop PCs too. Update the code comments accordingly.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by
the same issue that caused Vaio Z laptops to become silent: the speaker pin
must be connected to the first DAC even though the codec itself advertises
flexible routing through any of the DACs.

Use the no-primary-hp fixup for choosing the speaker pin as the primary so
that the right DAC is assigned on this device.

Cc: stable@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reduces the resultant binary size.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>