Pull io_uring fixes from Jens Axboe:

 - Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail

 - Cover a few cases where async poll can handle retry, eliminating the
   need for an async thread

 - fallback request busy/free fix (Bijan)

 - syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)

 - Fix extra put of req for sync_file_range (Pavel)

 - Always punt splice async. We'll improve this for 5.8, but wanted to
   eliminate the inode mutex lock from the non-blocking path for 5.7
   (Pavel)

* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  io_uring: punt splice async because of inode mutex
  io_uring: check non-sync defer_list carefully
  io_uring: fix extra put in sync_file_range()
  io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
  io_uring: use proper references for fallback_req locking
  io_uring: only force async punt if poll based retry can't handle it
  io_uring: enable poll retry for any file with ->read_iter / ->write_iter
  io_uring: statx must grab the file table for valid fd

Pull block fixes from Jens Axboe:
 "A few fixes for this release:

   - NVMe pull request from Christoph, with a single fix for a double
     free in the namespace error handling.

   - Kill the bd_openers check in blk_drop_partitions(), fixing a
     regression in this merge window (Christoph)"

* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  block: remove the bd_openers checks in blk_drop_partitions
  nvme: prevent double free in nvme_alloc_ns() error handling

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes, and two reverts because the original patches
  revealed underlying problems which the Tegra guys are now working on"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Avoid i2c interrupt status clear race condition.
  i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
  Revert "i2c: tegra: Synchronize DMA before termination"
  i2c: iproc: generate stop event for slave writes

Pull sound fixes from Takashi Iwai:
 "Just a collection of small fixes around this time:

   - One more try for fixing PCM OSS regression

   - HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
     a lock fix in the minor error path, and a fix for the possible race
     at monitor notifiaction

   - USB-audio: a quirk ID fix, a fix for POD HD500 workaround"

* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
  ALSA: opti9xx: shut up gcc-10 range warning
  ALSA: hda/hdmi: fix without unlocked before return
  ALSA: hda/hdmi: fix race in monitor detection during probe
  ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
  ALSA: line6: Fix POD HD500 audio playback
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
  ALSA: hda: Match both PCI ID and SSID for driver blacklist

Pull drm fixes from Dave Airlie:
 "Regular scheduled fixes for graphics. Nothing to extreme bunch of
  amdgpu fixes, i915 and qxl fixes, along with some misc ones.

  All seems to be progressing normally.

  core:
   - EDID off by one DTD fix
   - DP mst write return code fix

  dma-buf:
   - fix SET_NAME ioctl uapi
   - doc fixes

  amdgpu:
   - Fix a green screen on resume issue
   - PM fixes for SR-IOV SDMA fix for navi
   - Renoir display fixes
   - Cursor and pageflip stuttering fixes
   - Misc additional display fixes
   - (uapi) Add additional DCC tiling flags for navi1x

  i915:
   - Fix selftest refcnt leak (Xiyu)
   - Fix gem vma lock (Chris)
   - Fix gt's i915_request.timeline acquire by checking if cacheline is
     valid (Chris)
   - Fix IRQ postinistall fault masks (Matt)

  qxl:
   - use after gree fix
   - fix lost kunmap
   - release leak fix

  virtio:
   - context destruction fix"

* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  dma-buf: fix documentation build warnings
  drm/qxl: qxl_release use after free
  drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
  drm/i915: Use proper fault mask in interrupt postinstall too
  drm/amd/display: Use cursor locking to prevent flip delays
  drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
  drm/amd/display: Defer cursor update around VUPDATE for all ASIC
  drm/amd/display: fix rn soc bb update
  drm/amd/display: check if REFCLK_CNTL register is present
  drm/amdgpu: bump version for invalidate L2 before SDMA IBs
  drm/amdgpu: invalidate L2 before SDMA IBs (v2)
  drm/amdgpu: add tiling flags from Mesa
  drm/amd/powerplay: avoid using pm_en before it is initialized revised
  Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
  drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
  drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
  drm/virtio: only destroy created contexts
  drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
  drm/i915/gt: Check cacheline is valid before acquiring
  drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
  ...

Pull SCSI fixes from James Bottomley:
 "Four minor fixes: three in drivers and one in the core.

  The core one allows an additional state change that fixes a regression
  introduced by an update to the aacraid driver in the previous merge
  window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target/iblock: fix WRITE SAME zeroing
  scsi: qla2xxx: check UNLOADING before posting async work
  scsi: qla2xxx: set UNLOADING before waiting for session deletion
  scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK

Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

[   40.179474] refcount_t: underflow; use-after-free.
[   40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[   40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[   40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[   40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[   40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[   40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[   40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[   40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[   40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[   40.179634] FS:  0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[   40.179636] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[   40.179641] Call Trace:
[   40.179652]  io_put_req+0x36/0x40
[   40.179657]  io_free_work+0x15/0x20
[   40.179661]  io_worker_handle_work+0x2f5/0x480
[   40.179667]  io_wqe_worker+0x2a9/0x360
[   40.179674]  ? _raw_spin_unlock_irqrestore+0x24/0x40
[   40.179681]  kthread+0x12c/0x170
[   40.179685]  ? io_worker_handle_work+0x480/0x480
[   40.179690]  ? kthread_park+0x90/0x90
[   40.179695]  ret_from_fork+0x35/0x40
[   40.179702] ---[ end trace 85027405f00110aa ]---

Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cpu_relax();

above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.

Use cond_resched() can fix this issue.

 Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.

Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Merge tag 'amd-drm-fixes-5.7-2020-04-29' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.7-2020-04-29:

amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV
- SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes

UAPI:
- Add additional DCC tiling flags for navi1x
  Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4697Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429212008.4306-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430140042.GA270140@intel.com

A few resources-related fixes for qxl, some doc build warnings and ioctl
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan

Merge tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Document DM integrity allow_discard feature that was added during 5.7
   merge window.

 - Fix potential for DM writecache data corruption during DM table
   reloads.

 - Fix DM verity's FEC support's hash block number calculation in
   verity_fec_decode().

 - Fix bio-based DM multipath crash due to use of stale copy of
   MPATHF_QUEUE_IO flag state in __map_bio().

* tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
  dm verity fec: fix hash block number in verity_fec_decode
  dm writecache: fix data corruption when reloading the target
  dm integrity: document allow_discard option

Pull SELinux fixes from Paul Moore:
 "Two more SELinux patches to fix problems in the v5.7-rcX releases.

  Wei Yongjun's patch fixes a return code in an error path, and my patch
  fixes a problem where we were not correctly applying access controls
  to all of the netlink messages in the netlink_send LSM hook"

* tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: properly handle multiple messages in selinux_netlink_send()
  selinux: fix error return code in cond_read_list()

Merge tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fix from Shuah Khan:
 "A single fix to flush the test summary to the console log without
  delay"

* tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Add missing newline in summary message

Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - ftrace test fixes to check for required filter files and kprobe args.

 - Kselftest build/cross-build dependency check script to make it easier
   for test ring admins/users to configure build systems correctly for
   build/cross-build kselftests. Currently checks library dependencies.

    - Checks if Kselftests can be built/cross-built on a system running
      compile test on a trivial C file with LDLIBS specified for each
      individual test in their Makefiles.

    - Prints suggested target list for a system filtering out tests
      failed the build dependency check from the TARGETS in Selftests
      the main Makefile when optional -p is specified.

    - Prints pass/fail dependency check for each tests/sub-test.

    - Prints pass/fail targets and libraries.

    - Default: runs dependency checks on all tests.

    - Optional test name can be specified to check dependencies for it.

* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Check the first record for kprobe_args_type.tc
  selftests: add build/cross-build dependency check script
  selftests/ftrace: Check required filter files before running test

Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control.  Prior to this patch, SELinux only inspected
the first message in the sk_buff.

Cc: stable@vger.kernel.org
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NStephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Pull MMC fixes from Ulf Hansson:

 - meson-mx-sdio: Fix support for HW busy detection

 - sdhci-msm: Fix support for HW busy detection

 - cqhci: Fix polling loop by converting to readx_poll_timeout()

 - sdhci-xenon: Fix annoying 1.8V regulator warning

 - sdhci-pci: Fix eMMC driver strength for BYT-based controllers

* tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers
  mmc: sdhci-xenon: fix annoying 1.8V regulator warning
  mmc: sdhci-msm: Enable host capabilities pertains to R1b response
  mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop
  mmc: meson-mx-sdio: remove the broken ->card_busy() op
  mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY
  mmc: core: make mmc_interrupt_hpi() static

When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong.  When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.

So instead of trying to come up with a logical check for all openers,
just remove the check entirely.

Fixes: d3ef5536 ("block: fix busy device checking in blk_drop_partitions")
Fixes: cb6b771b ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: NMichal Koutný <mkoutny@suse.com>
Reported-by: NYang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe fix from Christoph.

* 'nvme-5.7' of git://git.infradead.org/nvme:
  nvme: prevent double free in nvme_alloc_ns() error handling

Fix documentation warnings in dma-buf.[hc]:

../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach'
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach'
../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format:          * @move_notify
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org

In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.

Fixes: f327c686 ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: Nryan_chen <ryan_chen@aspeedtech.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The problem is that we dereference "privdata->pci_dev" when we print
the error messages in amd_mp2_pci_init():

	dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n");
		^^^^^^^^^^^^^^^^^

Fixes: 529766e0 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0.

Fixes: f656891c ("ALSA: usb-audio: add more quirks for DSD interfaces")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:

sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  322 |   (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
  351 |   snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  873 |   (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
 1010 |   snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~

These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.

Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.

Fixes: 1841f613 ("[ALSA] Add snd-miro driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of fixes.

  Specifically:

   - fix linker argument to allow linking with lld

   - build fix for configurations without a frame pointer

   - a handful of build fixes related the SBI 0.1 vs 0.2 split

   - remove STRICT_KERNEL_RWX for !MMU, which isn't useful"

* tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU
  riscv: sbi: Fix undefined reference to sbi_shutdown
  tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI
  riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export
  riscv: fix vdso build with lld
  RISC-V: stacktrace: Declare sp_in_global outside ifdef

Pull crypto fixes from Herbert Xu:
 "This fixes a bunch of bugs detected by KASAN in the caam driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix the address of the last entry of S/G
  crypto: caam - fix use-after-free KASAN issue for RSA algorithms
  crypto: caam - fix use-after-free KASAN issue for HASH algorithms
  crypto: caam - fix use-after-free KASAN issue for AEAD algorithms
  crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms

qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.

It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object

Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.

cc: stable@vger.kernel.org
Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

v2: removed TODO reminder
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846

After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().

Fixes: 960a581e ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: NWu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>

When adding devices that don't have a scsi_dh on a BIO based multipath,
I was able to consistently hit the warning below and lock-up the system.

The problem is that __map_bio reads the flag before it potentially being
modified by choose_pgpath, and ends up using the older value.

The WARN_ON below is not trivially linked to the issue. It goes like
this: The activate_path delayed_work is not initialized for non-scsi_dh
devices, but we always set MPATHF_QUEUE_IO, asking for initialization.
That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath.
Nevertheless, only for BIO-based mpath, we cache the flag before calling
choose_pgpath, and use the older version when deciding if we should
initialize the path.  Therefore, we end up trying to initialize the
paths, and calling the non-initialized activate_path work.

[   82.437100] ------------[ cut here ]------------
[   82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624
  __queue_delayed_work+0x71/0x90
[   82.438436] Modules linked in:
[   82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339
[   82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90
[   82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9
94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74
a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07
[   82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007
[   82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000
[   82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200
[   82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970
[   82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930
[   82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008
[   82.445427] FS:  00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000
[   82.446040] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0
[   82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   82.448012] Call Trace:
[   82.448164]  queue_delayed_work_on+0x6d/0x80
[   82.448472]  __pg_init_all_paths+0x7b/0xf0
[   82.448714]  pg_init_all_paths+0x26/0x40
[   82.448980]  __multipath_map_bio.isra.0+0x84/0x210
[   82.449267]  __map_bio+0x3c/0x1f0
[   82.449468]  __split_and_process_non_flush+0x14a/0x1b0
[   82.449775]  __split_and_process_bio+0xde/0x340
[   82.450045]  ? dm_get_live_table+0x5/0xb0
[   82.450278]  dm_process_bio+0x98/0x290
[   82.450518]  dm_make_request+0x54/0x120
[   82.450778]  generic_make_request+0xd2/0x3e0
[   82.451038]  ? submit_bio+0x3c/0x150
[   82.451278]  submit_bio+0x3c/0x150
[   82.451492]  mpage_readpages+0x129/0x160
[   82.451756]  ? bdev_evict_inode+0x1d0/0x1d0
[   82.452033]  read_pages+0x72/0x170
[   82.452260]  __do_page_cache_readahead+0x1ba/0x1d0
[   82.452624]  force_page_cache_readahead+0x96/0x110
[   82.452903]  generic_file_read_iter+0x84f/0xae0
[   82.453192]  ? __seccomp_filter+0x7c/0x670
[   82.453547]  new_sync_read+0x10e/0x190
[   82.453883]  vfs_read+0x9d/0x150
[   82.454172]  ksys_read+0x65/0xe0
[   82.454466]  do_syscall_64+0x4e/0x210
[   82.454828]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
[   82.462501] ---[ end trace bb39975e9cf45daa ]---

Cc: stable@vger.kernel.org
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The IRQ postinstall handling had open-coded pipe fault mask selection
that never got updated for gen11.  Switch it to use
gen8_de_pipe_fault_mask() to ensure we don't miss updates for new
platforms.

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: d506a65d ("drm/i915: Catch GTT fault errors for gen11+ planes")
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 869129ee)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Pull vfs fixes from Al Viro:
 "Two old bugs..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  propagate_one(): mnt_set_mountpoint() needs mount_lock
  dlmfs_file_write(): fix the bogosity in handling non-zero *ppos

Commit 6fcf0c72, a fix to get_tree_bdev() put a missing blkdev_put() in
the wrong place, before a warnf() that displays the bdev under
consideration rather after it.

This results in a silent lockup in printk("%pg") called via warnf() from
get_tree_bdev() under some circumstances when there's a race with the
blockdev being frozen.  This can be caused by xfstests/tests/generic/085 in
combination with Lukas Czerner's ext4 mount API conversion patchset.  It
looks like it ought to occur with other users of get_tree_bdev() such as
XFS, but apparently doesn't.

Fix this by switching the order of the lines.

Fixes: 6fcf0c72 ("vfs: add missing blkdev_put() in get_tree_bdev()")
Reported-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Ian Kent <raven@themaw.net>
cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[Why]
Current locking scheme for cursor can result in a flip missing
its vsync, deferring it for one or more vsyncs.  Result is a
potential for stuttering when cursor is moved.

[How]
Use cursor update lock so that flips are not blocked while cursor
is being programmed.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.

[HOW]
Update the value in dcn21_resource to match the spreadsheet.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>