These two functions provide support for mapping and
unmapping physical addresses to io virtual addresses. The
difference to the iommu_(un)map_range() is that the new
functions take a gfp_order parameter instead of a size. This
allows the IOMMU backend implementations to detect easier if
a given range can be mapped by larger page sizes.
These new functions should replace the old ones in the long
term.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The new function pointer names match better with the
top-level functions of the iommu-api which are using them.
Main intention of this change is to make the ->{un}map
pointer names free for two new mapping functions.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This marks the guest single-step API improvement of 94fe45da and
91586a3b with a capability flag to allow reliable detection by user
space.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.33)
Signed-off-by: NAvi Kivity <avi@redhat.com>

We intercept #BP while in guest debugging mode. As VM exits due to
intercepted exceptions do not necessarily come with valid
idt_vectoring, we have to update event_exit_inst_len explicitly in such
cases. At least in the absence of migration, this ensures that
re-injections of #BP will find and use the correct instruction length.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.32, 2.6.33)
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch fixes emulate_syscall(), emulate_sysenter() and
emulate_sysexit() to handle injected faults properly.

Even though original code injects faults in these functions,
we cannot handle these unless we use the different return
value from the UNHANDLEABLE case. So this patch use X86EMUL_*
codes instead of -1 and 0 and makes x86_emulate_insn() to
handle these propagated faults.

Be sure that, in x86_emulate_insn(), goto cannot_emulate and
goto done with rc equals X86EMUL_UNHANDLEABLE have same effect.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.

Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch injects page fault when reading descriptor in
load_guest_segment_descriptor() fails with FAULT.

Effects of this injection: This function is used by
kvm_load_segment_descriptor() which is necessary for the
following instructions:

 - mov seg,r/m16
 - jmp far
 - pop ?s

This patch makes it possible to emulate the page faults
generated by these instructions. But be sure that unless
we change the kvm_load_segment_descriptor()'s ret value
propagation this patch has no effect.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Inject #UD if guest attempts to do so. This is in accordance to Intel
SDM.

Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The code relies on kvm->requests_lock inhibiting preemption.

Noted by Jan Kiszka.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert
them to raw_spinlock. No change for !RT kernels.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instructions with opcode 82 are not valid in 64 bit mode.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Just remove redundant semicolon.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

These features are unused by modern userspace and can go away.  Paravirt
mmu needs to stay a little longer for live migration.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instructions which are not allowed to have LOCK prefix should
generate #UD if one is used.

[avi: fold opcode 82 fix from another patch]
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add CPL checking in case emulator is tricked into emulating
privilege instruction from userspace.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

POPF behaves differently depending on current CPU mode. Emulate correct
logic to prevent guest from changing flags that it can't change otherwise.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make emulator check that vcpu is allowed to execute IN, INS, OUT,
OUTS, CLI, STI.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently when x86 emulator needs to access memory, page walk is done with
broadest permission possible, so if emulated instruction was executed
by userspace process it can still access kernel memory. Fix that by
providing correct memory access to page walker during emulation.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

For some instructions CPU behaves differently for real-mode and
virtual 8086. Let emulator know which mode cpu is in, so it will
not poke into vcpu state directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use groups mechanism to decode 0F C7 instructions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use groups mechanism to decode 0F BA instructions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

wqh is unused, so we do not need to store it in irqfd anymore
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Old method prematurely sets ESR and DEAR.
Move this part after we decide to inject interrupt,
which is more like hardware behave.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NHollis Blanchard <hollis@penguinppc.org>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If KVM_CREATE_IRQCHIP fail due to kvm_setup_default_irq_routing(),
ioapic device is not destroyed and kvm->arch.vioapic is not set to
NULL, this may cause KVM_GET_IRQCHIP and KVM_SET_IRQCHIP access to
unexcepted memory.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If fail to create pit, we should unregister kvm irq notifier
which register in kvm_create_pit().
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Following the new SDM. Now the bit is named "Ignore PAT memory type".
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Fixed 2 codestyle issues in virt/kvm/coalesced_mmio.c
Signed-off-by: NJochen Maes <jochen.maes@sejo.be>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm_emulate_pio() and complete_pio() both read out the
RAX register value and copy it to a place into which
the value read out from the port will be copied later.

This patch removes this redundancy.

/*** snippet from arch/x86/kvm/x86.c ***/
int complete_pio(struct kvm_vcpu *vcpu)
{
	...
	if (!io->string) {
		if (io->in) {
			val = kvm_register_read(vcpu, VCPU_REGS_RAX);
			memcpy(&val, vcpu->arch.pio_data, io->size);
			kvm_register_write(vcpu, VCPU_REGS_RAX, val);
		}
	...
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently KVM pretends that pages with EPT mappings never got
accessed.  This has some side effects in the VM, like swapping
out actively used guest pages and needlessly breaking up actively
used hugepages.

We can avoid those very costly side effects by emulating the
accessed bit for EPT PTEs, which should only be slightly costly
because pages pass through page_referenced infrequently.

TLB flushing is taken care of by kvm_mmu_notifier_clear_flush_young().

This seems to help prevent KVM guests from being swapped out when
they should not on my system.
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

msr was tested above, so the second test is not needed.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@

if (x == NULL || ...) {
    ... when forall
    return ...; }
... when != goto l;
    when != x = e
    when != &x
*x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAvi Kivity <avi@redhat.com>

String constants that are continued on subsequent lines with \
are not good.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch fixes kvm_fix_hypercall() to propagate X86EMUL_*
info generated by emulator_write_emulated() to its callers:
suggested by Marcelo.

The effect of this is x86_emulate_insn() will begin to handle
the page faults which occur in emulator_write_emulated():
this should be OK because emulator_write_emulated_onepage()
always injects page fault when emulator_write_emulated()
returns X86EMUL_PROPAGATE_FAULT.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch fixes load_guest_segment_descriptor() to return
X86EMUL_PROPAGATE_FAULT when it tries to access the descriptor
table beyond the limit of it: suggested by Marcelo.

I have checked current callers of this helper function,
  - kvm_load_segment_descriptor()
  - kvm_task_switch()
and confirmed that this patch will change nothing in the
upper layers if we do not change the handling of this
return value from load_guest_segment_descriptor().

Next step: Although fixing the kvm_task_switch() to handle the
propagated faults properly seems difficult, and maybe not worth
it because TSS is not used commonly these days, we can fix
kvm_load_segment_descriptor(). By doing so, the injected #GP
becomes possible to be handled by the guest. The only problem
for this is how to differentiate this fault from the page faults
generated by kvm_read_guest_virt(). We may have to split this
function to achive this goal.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.
Signed-off-by: NZhai Edwin <edwin.zhai@intel.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

flexpriority_enabled implies cpu_has_vmx_virtualize_apic_accesses() returning
true, so we don't need this check here.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>