- 26 8月, 2009 1 次提交
-
-
由 Dmitry Torokhov 提交于
When KBC is in active multiplexing mode, disabling and re-enabling the touchpad with the special key leaves the touchpad dead. Since the laptop does not have any external PS/2 ports disabling MUX mode should be safe. Reported-by: NEugeniy Meshcheryakov <eugen@debian.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 8月, 2009 3 次提交
-
-
由 Pavel Revak 提交于
Sometimes, when using the touchscreen, it stops working till next restart and the following message is printed: ucb1400: unexpected IE_STATUS = 0x0 The following patch retriggers the touchscreen interrupt unconditionally. This prevents hanging of the touchscreen in case of bogus interrupt occurence. Signed-off-by: NPavel Revak <palo@bielyvlk.sk> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Marek Vasut 提交于
This patch enables ADC filtering on UCB1400 codec by default. The benefit from this change is mostly on some Colibri boards where the ADCSYNC pin of the UCB1400 codec isn't connected causing the touchscreen to jitter very badly. This change has no visible effect on boards where the ADCSYNC pin is connected. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Tested-by: NPalo Revak <palo@bielyvlk.sk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Tested-by: NMartin Capitanio <martin@capitanio.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 20 8月, 2009 1 次提交
-
-
由 Jiri Kosina 提交于
Reported-by: cemede@gmail.com Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 12 8月, 2009 1 次提交
-
-
由 Stephen Kitt 提交于
The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: NStephen Kitt <steve@sk2.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 8月, 2009 2 次提交
-
-
由 Eric Miao 提交于
Remove assumption on the shift and size of rows/columns form matrix_keypad driver. Signed-off-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 TJ 提交于
The Prestigio 157, an old no-name clone laptop uses input keys very similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled wireless radio frequency kill switch. This patch adds support for the RF kill switch control and adds manual identification of the model. The Prestigio does not expose any recognisable identity via dmidecode and so requires manual selection at module init using force=1 keymap=prestigio Signed-off-by: NTJ <ubuntu@tjworld.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 05 8月, 2009 1 次提交
-
-
由 Jory A. Pratt 提交于
The synaptic touchpad on the Asus G1S is not properly detected when rebooting machine or on cold boot from time to time. Adding the Asus G1S to the noloop exception table resolves the issue. # dmidecode 2.10 SMBIOS 2.4 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: ASUSTeK Computer Inc. Product Name: G1S Version: 1.0 Wake-up Type: Power Switch SKU Number: Family: Signed-off-by: NJory A. Pratt <geekypenguin@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 7月, 2009 1 次提交
-
-
由 Jerone Young 提交于
Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499Signed-off-by: NJerone Young <jerone.young@canonical.com> Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 14 7月, 2009 1 次提交
-
-
由 Daniel Mack 提交于
Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: NSven Neumann <s.neumann@raumfeld.com> Signed-off-by: NDaniel Mack <daniel@caiaq.de> Reviewed-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 13 7月, 2009 4 次提交
-
-
由 Simon Davie 提交于
This patch enables forced releasing of the Fn+Volume hotkeys on the Fujitsu Siemens Amilo Pi 3525 notebook. Signed-off-by: NSimon Davie <nexx@nexxdesign.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Frans Pop 提交于
Gets rid of the following warning: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Gruber 提交于
This avoids an infinite loop. Signed-off-by: NMichael Gruber <lists.mg@googlemail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Giuseppe Mazzotta 提交于
This patch adds DMI information to automatically load the correct layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks are clones of Fujitsu Amilo V2000, the hook for the v2000 is being used and I have tested that perfectly works. The immediate result of integrating this patch is that the five special buttons will work on these specific notebook models and that the RF killswitch will not be activated after suspend. This patch definitively obsoletes the fsam7400 module which I was still needing to enable wifi and to fix the RF killswitch suspend problem; in the current 2.6.30 kernel it is necessary to load the wistron_btns module with options 'force=1 keymap=1557/MS2141', which was not anyway a complete workaround. Signed-off-by: NGiuseppe Mazzotta <g.mazzotta@iragan.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 08 7月, 2009 2 次提交
-
-
由 Saeed Bishara 提交于
This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
Serio ports are not being restarted any longer because resume operations after hibernate do nothing, since the device has not been marked as suspended. This happens because suspend is only considering the SUSPEND event but not the FREEZE event. Note that this driver has still to migrate to dev_pm_ops, but this fixes this particular bug now. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 29 6月, 2009 7 次提交
-
-
由 Eric Miao 提交于
Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Reviewed-by: NTrilok Soni <soni.trilok@gmail.com> Reviewed-by: NUli Luckas <u.luckas@road.de> Reviewed-by: NRussell King <linux@arm.linux.org.uk> Reviewed-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Hopefully it will reduce conflicts when merging patches. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jani Nikula 提交于
The gpio_get_value function may sleep, so it should not be called in a timer function. Move gpio_get_value calls to workqueue. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jani Nikula 提交于
This reverts commit 0b346838. This commit breaks GPIO debouncing by replacing the original mod_timer with schedule_delayed_work in the interrupt handler. The latter does not kick the timer further on GPIO line changes as it should to perform debouncing. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 David Brownell 提交于
The keypad driver for the DM355 EVM got slightly broken as it merged, since it moved from input/keyboard to input/misc and its Kconfig symbol changed. This patch copes with the changed Kconfig symbol. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ping Cheng 提交于
This patch adds DTF720a support and fixes an Intuos3 rotation pen out-proximity bug. Signed-off-by: NPing Cheng <pingc@wacom.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Yan Li 提交于
When testing Moblin on various netbooks, we've got reports that many MSI Wind clones need the i8042 reset quirks for the keyboard and/or touchpad's proper function. Signed-off-by: NYan Li <yan.i.li@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 20 6月, 2009 2 次提交
-
-
由 Mike Rapoport 提交于
This driver supports Synaptics I2C touchpad controller on eXeda mobile device. Unfortunaltely it only works in relative mode and thus is not comaptible with Xorg Synaptics driver. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Tero Saarni 提交于
Synaptics uses anisotropic coordinate system. On some wide touchpads vertical resolution can be twice as high as horizontal which causes unequal sensitivity on x/y directions. Add support for reading the resolution with EVIOCGABS ioctl. Signed-off-by: NTero Saarni <tero.saarni@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 11 6月, 2009 5 次提交
-
-
由 Ulrich Dangel 提交于
When pressing any button belonging to the touchpoint, the generated click events don't belong to the touchpoint but to the touchpad. This patch fixes this behaviour, the events will be sent via the correct device, so scrolling with touchpoint is possible. Signed-off-by: NUlrich Dangel <uli@spamt.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Alek Du 提交于
The gpio_get_value function of I2C/SPI GPIO expander may sleep thus this function call can not be called in a timer function. Signed-off-by: NAlek Du <alek.du@intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Roth 提交于
Some SoCs support only pin change interrupts on GPIO pins used as irq lines. The ads7846 core is not affected from the additional irqs on the rising edge because the code accounts touch bounce anyway by kicking in a timer and disabling the irq after the first request and reenabling the irq after a timeout when there is no longer pen down detected. Signed-off-by: NMichael Roth <mroth@nessie.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Wan ZongShun 提交于
The touchscreen works in two modes, wait trigger mode and auto-semi mode. The device starts in wait trigger mode and waits until pressure is detected, then device sets WT_INT bit and raises an interrupt. The driver should put the device into auto-semi mode and prepare for reading first X and then Y coordinates. When coordinate data is ready the driver sets ADC_INT bit and raises interrupt again. [dtor@mail.ru: various cleanups] Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
-
- 10 6月, 2009 5 次提交
-
-
由 Linus Torvalds 提交于
-
由 Peter Botha 提交于
There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" <peterb@goldcircle.co.za> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
In commit code, we scan buffers attached to a transaction. During this scan, we sometimes have to drop j_list_lock and then we recheck whether the journal buffer head didn't get freed by journal_try_to_free_buffers(). But checking for buffer_jbd(bh) isn't enough because a new journal head could get attached to our buffer head. So add a check whether the journal head remained the same and whether it's still at the same transaction and list. This is a nasty bug and can cause problems like memory corruption (use after free) or trigger various assertions in JBD code (observed). Signed-off-by: NJan Kara <jack@suse.cz> Cc: <stable@kernel.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ian Kent 提交于
The recent ->lookup() deadlock correction required the directory inode mutex to be dropped while waiting for expire completion. We were concerned about side effects from this change and one has been identified. I saw several error messages. They cause autofs to become quite confused and don't really point to the actual problem. Things like: handle_packet_missing_direct:1376: can't find map entry for (43,1827932) which is usually totally fatal (although in this case it wouldn't be except that I treat is as such because it normally is). do_mount_direct: direct trigger not valid or already mounted /test/nested/g3c/s1/ss1 which is recoverable, however if this problem is at play it can cause autofs to become quite confused as to the dependencies in the mount tree because mount triggers end up mounted multiple times. It's hard to accurately check for this over mounting case and automount shouldn't need to if the kernel module is doing its job. There was one other message, similar in consequence of this last one but I can't locate a log example just now. When checking if a mount has already completed prior to adding a new mount request to the wait queue we check if the dentry is hashed and, if so, if it is a mount point. But, if a mount successfully completed while we slept on the wait queue mutex the dentry must exist for the mount to have completed so the test is not really needed. Mounts can also be done on top of a global root dentry, so for the above case, where a mount request completes and the wait queue entry has already been removed, the hashed test returning false can cause an incorrect callback to the daemon. Also, d_mountpoint() is not sufficient to check if a mount has completed for the multi-mount case when we don't have a real mount at the base of the tree. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
The massive nommu update (8feae131) resulted in these warnings: ipc/shm.c: In function `sys_shmdt': ipc/shm.c:974: warning: unused variable `size' ipc/shm.c:972: warning: unused variable `next' Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 6月, 2009 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: kvm: fix kvm reboot crash when MAXSMP is used cpumask: alloc zeroed cpumask for static cpumask_var_ts cpumask: introduce zalloc_cpumask_var
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bsg: setting rq->bio to NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: cls_cgroup: Fix oops when user send improperly 'tc filter add' request r8169: fix crash when large packets are received
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix bug in reshape code when chunk_size decreases. md/raid5 - avoid deadlocks in get_active_stripe during reshape md/raid5: use conf->raid_disks in preference to mddev->raid_disk
-